Problems with loading webpages on Window 8.1 Pro

Hi there.
I have owned a MacBook Air 13" 2013 edition since it was released and everything has been absolutely fine, no problems what so ever. Recently though I have installed Windows 8.1 Pro through Boot Camp. Going through all the steps it has all set up fine from what I can tell, the installation went smoothly and all the Apple drivers were installed like instructed. Since using it though I have noticed that when surfing the web on my MacBook, the load times are faster in Mac OS X 10.9 by quite a lot in some cases and I am often hitting the 'Reload' button when Chrome tells me that it couldn't connect. I run the latest version of Google Chrome and Firefox on both so I know that there shouldn't be a big difference in speed.
I have done Wi-Fi troubleshooting but nothing, everything seems to look okay but Win 8.1 Pro is defiantly not as consistent as Mac OS X 10.9 is. Would this be a driver issue? How do I fix this?
Thanks, Matt.

I would download the latests bootcamp driver zip
Apple - Support - Downloads
if it's 5033 or 5621 depend on your model which ones for which are listed
unzip in windows and navigate to the wifi or ethernet driver and manually install the drivers

Similar Messages

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
I have reset IE9. Same problem.
I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
Any suggestions for how to solve this (other than using software rendering)?

Thanks again for your reply. I appreciate the time you have taken to respond.
I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
2. Use another browser - I have no problems with either Firefox or Chrome

Beginner Has Problem With Loading JDBC Driver Using MySQL

Hi, I am having problem with loading JDBC driver, and need your diagnotic help.
1. I have installed MySQL (C:\mysql), created a databse (soup), and created a littel table (VIDEOS). I am able to see the table in the console:
sql> select * from videos
2. I have downloaded the latest version of Connector/J (mysql-connector-java-3.1.0-alpha.zip), and unzip the zip file into my C:\ directory.
3. I copied the mysql-connector-java-3.1.0-alpha-bin.jar to the C:\j2sdk1.4.1_02\jre\lib\ext folder and it is in my CLASSPATH
4. MySQL server is running
C:\> C:\mysql\bin\mysqld-nt --standalone
5. open another DOS window and use the database
mysql>USE SOUP
6. succesfully compiled a Java program (javac Test.java):
import java.sql.* ;
public class Test
public static void main( String[] args )
try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
try
Connection con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/soup" );
try
Statement statement = con.createStatement();
ResultSet rs = statement.executeQuery("SELECT TITLE FROM VIDEOS");
while ( rs.next() )
System.out.println( rs.getString( "TITLE" ) );
rs.close();
statement.close();
catch ( SQLException e )
System.out.println( "JDBC error: " + e );
finally
con.close();
catch( SQLException e )
System.out.println( "could not get JDBC connection: " + e );
catch( Exception e )
System.out.println( "could not load JDBC driver: " + e );
7. when I run the Java program (java Test), I got
the message:
could not load JDBC driver: java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
What am I missing?

Hi,
I missed to specify test in my last post.
Try running your program by explicitly setting the classspath when
running your program . java -classpath c:\mysql-connector-java-3.1.0-alpha-bin.jar test
Make sure your jar file contains org.gjt.mm.mysql.Driver class

Problem with Loading Images?

<pre><i>Locking duplicate thread.
Please continue here: [[/questions/982030]]
</i></pre>
Hi,
I'm using Firefox 26.0 and I'm kinda new user to Firefox.
I'm having this random issue with facebook (sometimes with other websites too),
Sometimes when I open a page, the Images doesn't show as usual.
Sometimes it takes up to 10sec - 2 mnts to finish loading all the images.
My internet is 8Mbps so I don't think its due to that?
Here is a screenshot of the exact issue: http://i.imgur.com/I3eOQaI.jpg
But it get fixed for a while (say 1-2 days) if I clear the cookies and caches. I visits a lot of webpages so clearing cookies and caches all the times is kinda not pretty possible.
I also tried disabling all my add-ons, and ran a full scan with McAfee.
Can anyone tells me what exactly could be the issue? It gets pretty annoying sometimes!
Thanks in advance!
Regards,
Abey

'''Hi, Thanks for Visiting this Question. But it was a duplicate of https://support.mozilla.org/en-US/questions/982030 (The Same question) Accidentally posted twice''' and I couldn't find an option to delete it, so please '''ignore''' this :-)
Original thread: [[https://support.mozilla.org/en-US/questions/982030|"Problem with Loading Images"]]
Warm Regards,
Abey

Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance

Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problems with loading native library/missing methods: no ttJdbcCS1121

Hi guys,
Im getting this problem in glassfish 2.1, but in glassfish 3 or in tomcat, i dont get this problem. (Windows)
Any thoughts?
java.sql.SQLException: Problems with loading native library/missing methods: no ttJdbcCS1121 in java.library.path
at com.timesten.jdbc.JdbcOdbcConnection.connect(JdbcOdbcConnection.java:1750)
at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:305)
at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:161)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at com.summitinvt.mdaq.db.handler.DBConnector.getConnection(DBConnector.java:108)
at com.summitinvt.mdaq.db.handler.DBConnector.initiateConnection(DBConnector.java:101)
at com.summitinvt.mdaq.db.handler.DBConnector.<init>(DBConnector.java:34)
at com.summitinvt.mdaq.db.handler.DBConnector.<init>(DBConnector.java:14)
at com.summitinvt.mdaq.db.handler.DBConnector$DBConnectorUtil.<clinit>(DBConnector.java:24)
at com.summitinvt.mdaq.db.handler.DBConnector.getInstance(DBConnector.java:28)
at com.summitinvt.mdaq.rats.server.CommunicatorImpl.getPnLByCurrency(CommunicatorImpl.java:1074)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC.java:562)
at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall(RemoteServiceServlet.java:207)
at com.google.gwt.user.server.rpc.RemoteServiceServlet.processPost(RemoteServiceServlet.java:243)
at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:382)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
regards
John

A similar problem was reported before on this Forum - see
Re: not able create connection to timesten
checking the Release Notes I can see 11.2.1.8.0 has been tested against Glassfish 3 but I
can't see any mention about Glassfish 2 in the v7 or v11 Release Notes (albeit only on a quick
search).
In my full install on XP, ttJdbcCS1121.dll is in C:\TimesTen\tt1121_32\bin

Problems with loading native library/missing methods:no ttJdbcCS in java.li

Iam facing one problem while connecting the timesten client to the server The SQL Exception which Iam getting is pasted below:-
Problems with loading native library/missing methods: no ttJdbcCS in java.library.path
I am working with MAC OS X 10.7.2 and my timesten client version is 11.2.1.0
I have also changed the Java Preferences from 64-bit to 32-bit but still whenever i tried to connect with the SQL Developer it gives me the above error.

I just tried this out. My environment is OS X 10.7.4, Timesten (32-bit) client 11.2.1.9.0, SQL Developer 3.1.07, Oracle Java 1.7.0_04.
The key things you need to be sure to do (in a terminal window) are:
1. Be sure to . in the TimesTen environment script <tt_install_dir>/bin/ttenv.sh to set the full TT environment.
2. Change directory to SQLDeveloper.app/Contents/Resources/sqldeveloper
3. Run 'sh sqldeveloper.sh -J-d32'
and all should be fine.
Note that if you are using Java7 as I am then there is a step 1a. Change the CLASSPATH environment variable to specify ttjdbc6.jar not ttjdbc5.jar. For some reason running the app directly from Finder does not work even if you add -J-d32 into the sqldeveloper launch script. I'm still looking into that.
Chris

Problems with loading native library missing methods ttJdbc1122.dll

Problems with loading native library/missing methods: C:\TimesTen\tt1122_64\bin\ttJdbc1122.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform
Hi,
I have installed TimesTen 11.2.2 64-bit version on 64-bit windows 7.
I have TimesTen 7 64-bit as well installed on my machice
When trying to connect to TimesTen (Direct connection) using jdbc from eclipse, I get the following error "Problems with loading native library/missing methods: C:\TimesTen\tt1122_64\bin\ttJdbc1122.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform".
The JDK version is 1.6.25 - 64 bit version.
Please help me resolving this error.
Thanks in Advance,
Balamurugan

Are you using SQL Developer?
There is or used to be a restriction of only being able to using 32 bit. A suggestion might be to try the 32 bit client.

Problems with shutdown, expose and window switching

Hi there,
Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
Any thoughts would be gratefully received.
TIA,
Mat

This sounds interesting.
Can you post a copy for the rest of us to see?
As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
Also, are you creating an installer and using that to install? If not, you may wish to try that.
Try to take over the world!

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Problem With Loading the jars

Hello Experts,
I am facing a problem with loading classes.
i have written one application which is running on server.in that application want to use certain jars(Classes)and those jars anmes and
classes inside the jars are same.based on the condition i want to call
corresponding class.
can any one suggest the solution
it's urgent
any help will be appriciated
thanks in advance
With regds
Bankuru

Hi Yogee,
Thanks for ur help.
i have 4.o jars and 5.1 version jars.depending on the condingtion system must use the corrensponding jar.the problem here is that both jars has same clasees and code inside that one is differnet.
when i run application with 4.o condition then 5.1 is not working and
if i run tha application with 5.1 then 4.o is not working.
can u please suggest the possible solution
i have deployed these jars in application server
With Regds
Bankuru

Problems with loading webpages on Window 8.1 Pro

Similar Messages

Maybe you are looking for