Problems with maintaining master data for infoobject 0SOLD_TO
Hello experts,
I'm not getting 'maintain master dada' option when I right click on the infoobject 0SOLD_TO. The data is already there from pervious data loads (from R/3 systems) and is visible in the reports. I'm using this infoobject in cube 0SD_C05 to report quotation/order details. Am I missing something here? Please guide.
Thanks
Sumit
Hi Sumit,
It looks you have asked your question in a wrong forum.
Please use BI forum to post your question.
Regards,
Pooja
Similar Messages
-
Problem with the master data loads
Hi Guys,
I am trying to load 0MATERIAL_ATTR in QA,but it is throwing error(Record 2 :0MATERIAL : Data record 2 ('000000000000000012 '): Version '000000000000000012 ' is not va ) and also similar error is coming when i load for 0VERSION(Record 1 :0VERSION : Data record 1 ('000E '): Version '000 ' is not valid ).
but for the same master data object in development with the same R/3 data the loads are successful,only in QA it is giving the problem.Hi Abdul,
Check if the data you are getting for the two fields in your data loading are correct. I think it has some illegal characters(I guess it has a trailing space). If possible try and correct it in the source system itself.
If you are doing full load for the master data, everytime the system is going to pull these values in and throw error. One other way of avoiding it will be to maintain routines to eliminate these.
The quickfix will be to correct it at the PSA level and load it again.
Regards. -
Problems with uploading master data in BI 2004S
Hi all,
I wanna upload master data in FI from R/3 System to BI System. I created its <b>transformation</b>. Then, I <b>migrated</b> it WITH EXPORT option. After that, I created <b>Data Transfer Process</b> (DTP), I didn't change any thing, just "Save and Active". Then I created <b>InfoPackage</b> for it => choose Schedule tab and press Start. Open DTP and choose Execute tab -> press Execute.
1. In the case of successful process (the log showed no errors), How can we check that data is transferred successfully?
2. <b><u>Case 2:</u></b> I did all above steps for a data source. But when I opened InfoPackage -> it said <b>"This InfoPackage has been already in Process Chain"</b>... I still continued to execute its DTP but I failed. The log said that the data was duplicated.
What does it mean? And what should I do in this case?
3. <b><u>Case 3</u></b>: I have a data souce Account Type with <0ACCT_TYPE_TEXT> (icon dialog). I migrated it but failed. Then, after I refreshed, this datasource moved to the group that had been migrated before (in the end of the tree) but <0ACC_TYPE_TEXT> disappeared.
So, I cannot create DTP or InfoPackage for it to transfer. In this case, Do I have to re-create a DataSource? What should I do?
Thanks in advance.case 1:
Check there might be duplicate record. as it is a text datasource language may be maintained. U can check in monitor what record is showing error.
case 2:
If u migrate the data source then it is a BI7.0 version.
If u want to recover 3.x datasource then u need to use RSDS .
Then again u can create Data Transaformation and DTP and migrate once again.
then load the data.
Normally if u r working on BI7.0 do all the stuffs(DT, DTP) using 3.X version then do the migration of datasource else if u migrate first and do the transformation then u will have to manual mapping and u may missed and do a lot of mistakes.
Thanks,
Debasish -
Problem with the master data restriction
Hi All,
I have a master data 0EMPLOYEE. The requirement is such that we need to restrict the future dated records i.e BEGINNING DATE <= SYSTEM -DATE. This we need to do at the extractor level which was done successfully. Now even after refreshing the master data 0EMPLOYEE in BW, I see the future dated records. May be these are the earlier records which were pulled.
I don't want to see these records in the cube. Obviously I need to put the same logic in cube. But I need to know where should I write this code. I want to know the BEGINING DATE field is assigned to what field in the cube?
Every where the assignment is of type "Master Data Attribute of".
Thanks,
SrinivasHi,
after doing at the extractot level,you need to replicate and then activate the DS.
Then run the InfoPackage with repair full req and then run delta DTP. It should solve ur data issue.
For Cube logic,
You need to declare the data declaration and select stmt in start routine and then write the code in indiv level routine.
check which field have u mapped for the masterdata and i think you can use cal day for beginning date but i'm not sure on this.
Wait for other's suggestion.
Cheers,
shana
assign pts if it is useful -
Facing problem with standard master data source *0bp_def_address_attr *
Hi All,
I am using BW 3.5 version
I am loading master data form 0bp_def_address_attr(stabdard data source) as part of my daily activities.
this loading is failing frequently throwing following error message
30 duplicate record found. 1243 recordings used in table /BI0/PBPARTNER
ID : RSDMD
message number 199
Is there any way I can avoid this failure?How can I handle duplicate records?
Please help me!!
Warm regards
Nanduri AdityaThanks for your answers and sorry for my late reply
Hi Srinivas,
I am using 3.5 there is no ' handle duplicate records' option in info pacakge.
Hi Francisco,
Thanks for your answers,
2 OSS notes are relevant to my problem. Currently I am checking in Dev whether it will fix my problem or not.
Thanks a lot it was avery helpful answer.
Warm Regrads,
Nanduri Aditya -
Fpga Simulation from Custom VI'a. Problem with reading TDMS data for simulation.
Hi there. I am havin a small no Big problem trying to use certein data for simulation purpose. All I/O are set up in custom Via. Everything works fine when it is set up like on a pic.1 Unfortunatly I would like to use certein data writtent to TDMS file. I tried to do it like in PIC2. It works on normal VI'a. It reads the file to array. Unfortunatly I don't know how to make it works in custom via set up for FPGA simulation. I am getting 0.
PIC.1 Random data...
PIC.2 Data from a file format.oki I managed my self. For some reason I had to skip first number in the array.
-
Problem with Material Master Data Upload using MM01?
Dear Abapers,
I done recording for uploading Material Master using MM01. I selected respective views at the time of recording. Then at the time of uploading it is not selecting the Quality view and Account1 view. Even I used 'P+' function code. it is working but not selecting the 2 views. Manually, if I select those 2 views uploading successfully.
Could you please let me clear on this issue?
Regards,
SekharHi Chandrasekar,
Scrolling in the view-selecting screen wont be recorded during SHBD ( Recording ).So you need to first select Basic data1 rather than Accounting 1 or Quality management.Once you are in the basic data screen, fill the required description( if its unavailable ) and then choose the accounting 1 or quality tab.Do a fresh recording with the above approach, your issue should be solved.
Regards,
Kiran
Edited by: Kiran NN on Feb 29, 2008 11:02 AM -
Problem loading text master data for one value
Hi guru's,
We are trying to load texts for an standard characteristic (data element : Char 30). The problem comes with characteristic value 4700112703/04/19 , all other values load correct but this one is recognized by SAP as an incorrect value. It seems, by the PSA explanation, that the / is incorrect.
Do you know why this value is incorrect ? Is there any way to load this record to the characteristic ?
Thanks in advance.Hi,
In RSKC specify the value as ALL_CAPITAL which would allow all the necessary and SAP supported values(including /) to come into BW.
Refer this blog for more information
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Regards,
Rik -
Issue with 0hrposition master data
We are extracting data from SAP using 0HRPOSITION_ATTR datasource. I noticed that data is not maintained correctly in master data tables in BW and giving us incorrect results in reporting. Consider below mentioned scenario:
Position A created as vacant on 04/01/2006 with start date (BEGDA/ Valid from) as 04/01/2006 and End date (ENDDA/ Valid to) as 12/31/9999 and is vacant. Below mentioned entry is shown under maintain master data for 0HRPOSITION in BW:
Position Valid To Valid From Position Vacant
A 03/31/2006 01/01/1000
A 12/31/9999 04/01/2006 X
Position A is now delimited on 09/15/2006 as its no more required. In SAP, position has record only from 04/01/2006 till 09/15/2006 as vacant. When record is extracted in BW, it creates below mentioned entry in master data table.
Position Valid To Valid From Position Vacant
A 03/31/2006 01/01/1000
A 09/15/2006 04/01/2006 X
<b>A 12/31/9999 09/16/2006 X</b>
Entry 09/16- 12/31 is incorrect as position doesnt exist for this duration. If we report on 0HRPOSTION with key date as 09/30/2006, it shows position A as vacant though position no longer exists.
Has anyone come across this situation. any help is greatly appreciated.
Kamal
P.S: Milind Rane...I was searching through the forums and came across your post.I would appreciate if you could let me know how you solved this issue...
Message was edited by:
Kamal KHI KK
I have a similar issue. Can you please let me know how this Issue with 0HRPOSITION_ATTR extractor was resolved. In my case i have incorrect data in BW when reporting is done. THrough the extractor untill the PSA i have the correct records coming but in the master data 0HRPOSITION i have incorrect records.
Please help.
Thanks
Hari
Message was edited by:
SAPCOOL -
Dumps when trying to Maintain master data
Hi All,
When we are trying to Maintain master data for a master data object 0WBS_ELEMT, we are getting a short dump "CALL_FUNCTION_NOT_FOUND" in our BI 7.0 system.
What we are doing is Right click on 0WBS_ELEMT info object and Maintain master data, then we get the above dump. Saw in one of the forums that by making the info object in active and activating it again it will solve the issue but even after doing this the issue still persists, we still get the dump. Would need help from all of you.
regards,
Suman PittaHi Suman,
The dump is due to the fact that 0WBS_ELEMT has an attribute which still
uses the POSID conversion exit. Attribute 0PROG_POS should use
conversion exit POSBW. And in fact, in RSD1 of this infoobject, POSID is
Still maintained. However, if you go to the DDIC object in SE11
(SE11 -> choose "Domain" -> /BI0/OPROG_POS -> Display), you will
see that the conversion routine POSID still appears. This is the reason
you get the dump.
In order to resolve this issue, go to RSD1 -> enter infoobject
'0PROG_POS' -> choose maintain -> Set object status to inactive and
reactivate the InfoObject. The reactivation should regenerate the DDIC
objects (you can check this in SE11 again).
Alternatively change to the version from content which utilises POSBW
already.
regards,
Colin -
Credit master data for Customer
Hi,
I need solution for the below problem.
Credit master data for Customer "X" is not maintained.
Is there any possibility to get the information /Error message during sales order creation/Save for Customer "X" as Credit master data is not maintain.
Information/Error message shouldd be:No credit master data maintain for Customer "X"
Thanks for your help.
Regards,
Balaji.Hi
You can use the followig user exit which will perform a check while saving the order.
Take the help of your abaper to write a code to check if the credit master has been maintained for the customer before saving the order.
Program,: MV45AFZZ
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Regards
Madhu -
Unable to make entries for objects with no master data in IP
Hi All,
In BPS, when created a layout, which contains characteristics, in whose properties 'Master Data' is not checked, we could enter the new values for them directly in the layout.
In IP, we could not do the same with the 'New Lines" option set on Analysis Item in the WAD for the characteristics whose master data property is not checked.
We have a layout, where, some characteristics are having master data checked, and some other characteristics where master data is not checked.
With the 'New Lines' option set on Analysis Item in the WAD for the characteristics whose master data property is not checked, when data entered, the error message is appearing saying that the data is not valid.
This is so quite simple in BPS. I think, I might be missing something in IP on how to achieve this.
Thanks in Advance,
Best Regards,
- ShashiHi,
In IP it's integerated that if you will not maintain master data you may not be able to plan for new value of characteristic.It's the normal behavior of system.
Cna check the link below:-
Master data planning in BI
Hope it may be helpful -
Please maintain the master data for material during product cost collector
hi
i get a error
please maintain the master data for material during product cost collector
please guide me
regards
leoHi Leo,
Can you elaborate your issue, like when did you get the error exactly?
If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
Please post your question in the 'ERP Manufacturing (PP)' forum
Regards,
Manimaran M -
BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject
Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
VasuThanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu -
Deriving master data for a InfoObject from DSO
HI sdn
I have DSO (D1) fed with flat file data .
I have a Info-Object ZMAT Compunded with ZCUST/ZSOLDTO exist in D1.
Requirement is I have to derive master data for ZMAT from the same D1 .
I am thinking of loading DSO first and then load master data forZMAT from D1. Please let me know if you see any issues with my procedure and also Is there any more effective solution for this kind of scenario?>
Sap@BI wrote:
> I have DSO (D1) fed with flat file data .
>
> I have a Info-Object ZMAT Compunded with ZCUST/ZSOLDTO exist in D1.
>
> Requirement is I have to derive master data for ZMAT from the same D1 .
>
> I am thinking of loading DSO first and then load master data forZMAT from D1. Please let me know if you see any issues with my procedure and also Is there any more effective solution for this kind of scenario?
You are using DSO as staging to your master data ?
What type of DSO ? You would not want to use a normal DSO with SID generation, as you would not report out of it.
Maybe you are looking for
-
Can you transfer music from an iPhone to iTunes?
i was just wondering if there is a way to get my music from my iPhone onto my iTunes on my Mac. my dell had a bad virus, so i gave it to a relative of mine to reinstall everything, and i told him to backup my itunes(which he forgot to do). so now i h
-
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP! T
-
I need to query a Long Integer from my app. I have tried using int and long but with no luck. I get a type mismatch every time it tries to execute. This does not work StringTokenizer st = new StringTokenizer(results.getSelectedVal
-
How can I modify / update T002C's only one field
Hi everyone ; I would like to write dialog programing code. After I am writing call screen screennumber, I would like to generate a design in screen painter.But screen painter doesn't open. There is an error. Error says ' EU_SCRP_WN32 : timeout durin
-
I have just started using iTunes U. Yesterday I started downloading files for a course. There were problems so I suspended subscribing and quit iTunes. Today I launched iTunes and the downloads continued. I noticed that the listing included a lot of