Problem with the master data loads

Hi Guys,
I am trying to load 0MATERIAL_ATTR in QA,but it is throwing error(Record 2 :0MATERIAL : Data record 2 ('000000000000000012 '): Version '000000000000000012 ' is not va ) and also similar error is coming when i load for 0VERSION(Record 1 :0VERSION : Data record 1 ('000E '): Version '000 ' is not valid ).
but for the same master data object in development with the same R/3 data the loads are successful,only in QA it is giving the problem.

Hi Abdul,
Check if the data you are getting for the two fields in your data loading are correct. I think it has some illegal characters(I guess it has a trailing space). If possible try and correct it in the source system itself.
If you are doing full load for the master data, everytime the system is going to pull these values in and throw error. One other way of avoiding it will be to maintain routines to eliminate these.
The quickfix will be to correct it at the PSA level and load it again.
Regards.

Similar Messages

Problem with the master data restriction

Hi All,
I have a master data 0EMPLOYEE. The requirement is such that we need to restrict the future dated records i.e BEGINNING DATE <= SYSTEM -DATE. This we need to do at the extractor level which was done successfully. Now even after refreshing the master data 0EMPLOYEE in BW, I see the future dated records. May be these are the earlier records which were pulled.
I don't want to see these records in the cube. Obviously I need to put the same logic in cube. But I need to know where should I write this code. I want to know the BEGINING DATE field is assigned to what field in the cube?
Every where the assignment is of type "Master Data Attribute of".
Thanks,
Srinivas

Hi,
after doing at the extractot level,you need to replicate and then activate the DS.
Then run the InfoPackage with repair full req and then run delta DTP. It should solve ur data issue.
For Cube logic,
You need to declare the data declaration and select stmt in start routine and then write the code in indiv level routine.
check which field have u mapped for the masterdata and i think you can use cal day for beginning date but i'm not sure on this.
Wait for other's suggestion.
Cheers,
shana
assign pts if it is useful

I want delete the Master data loads which i have already loaded earlier

Hi BW Guru's,
I want delete the Master data loads.
But i am unable to delete.
is there any option to delete from RSD1
Please send steps

Hi,
If that master data related ifo is present in cube u cont delete master data.
In that case u have to delete req in cube then u can delete
let me know further
*******Asgin Points if usefull***
Cheers,
Satya

Javacomm: problem with the receive data

Hello to all,
I have a problem on receiving data from a serial port.
As I figured out The port is obtained by the program I post
here bellow..but I can't receive data.
Do you have any hints?
Thanks in advance.
Mandy
import javax.comm.*;
import java.io.*;
public class SerialRead extends Thread implements SerialPortEventListener
 private InputStream in;
 public SerialRead(String port)
 try
 CommPortIdentifier id_porta;
 id_porta = CommPortIdentifier.getPortIdentifier(port);
 CommPort porta = id_porta.open("Read from serial porta", 200);
 in = porta.getInputStream();
 SerialPort porta_seriale = (SerialPort)porta;
 porta_seriale.setSerialPortParams(9600, SerialPort.DATABITS_8,
 SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
 porta_seriale.addEventListener(this);
 this.start();
 catch (NoSuchPortException ne)
 System.out.println("The port " + port + "is not present");
 catch (PortInUseException pe)
 System.out.println("The port " + port + "is used by " + pe.
 currentOwner);
 catch (UnsupportedCommOperationException ue)
 System.out.println(
 "The porta does not support the properties defined");
 catch (java.util.TooManyListenersException tme)
 System.out.println(
 "Ther can be only one owner of the port");
 catch (IOException ioe)
 System.out.println("Error ofi IO");
 public void run()
 try
 Thread.sleep(10000);
 catch (InterruptedException e)
 public void serialEvent(SerialPortEvent event)
 System.out.println("1");
 switch ( event.getEventType() )
 case SerialPortEvent.BI :
 case SerialPortEvent.OE :
 case SerialPortEvent.FE :
 case SerialPortEvent.PE :
 case SerialPortEvent.CD :
 case SerialPortEvent.CTS :
 case SerialPortEvent.DSR :
 case SerialPortEvent.RI :
 case SerialPortEvent.OUTPUT_BUFFER_EMPTY :
 break;
 case SerialPortEvent.DATA_AVAILABLE :
 byte[] readBuffer = new byte[20];
 try
 while ( in.available() > 0 )
 int numBytes = in.read(readBuffer);
 System.out.println(new String(readBuffer));
 catch (IOException e)
 break;
 public static void main(String[] args)
 System.out.println(args[0]);
 if ( args.length < 1 )
 System.out.println("Use java SerialRead <port name>");
 else
 SerialRead reading = new SerialRead(args[0]);
}

Hi Abdul,
Check if the data you are getting for the two fields in your data loading are correct. I think it has some illegal characters(I guess it has a trailing space). If possible try and correct it in the source system itself.
If you are doing full load for the master data, everytime the system is going to pull these values in and throw error. One other way of avoiding it will be to maintain routines to eliminate these.
The quickfix will be to correct it at the PSA level and load it again.
Regards.

Unable to find the master data loaded request in manage tab

Hi All,
Iam unable to see the loaded request in the master data manage tab after some time of loading.
Immediately after loading i could see the request.If i revisit the manage tab,iam unable to see the request.
However data is available for the info object .
Can anyone please suggest on this.
Regards,
Kavya

hi Devupalli,
Note your request number, find it using RSRQ tcode. Now click on the target icon and see if it takes you to the manage of your infoobject.
There is a very common error which we sometimes make: are u sure you're checking the right thing? please check that if your infoobject has text, attribute and hierarchy, you're checking in the manage of the relevant one.
For ex, if you're loading text, you have to go to manage of the text.
Hope this helps!
Sheen

How can I debug a problem with the 3g data connection on my iPhone 4s?

This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!

Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

Regarding the Master Data Loading

Hi Experts,
Can any one tell me the solution for me .I loaded the master data of an 0customer_attr to an info object standard "0customer".But here what happening means customer number kunnr is sucessfully loded but the ATTRIBUTES data was not loaded into the "0customer".Here i run the attribute change run as well as i load the data by using delta and full load .Can you suggest me is there any other solution for me to do.To get the attributes data.
Bye.

Hi
Check your processing type on infopack. May be it's only selected PSA only.
Regards,
Chandu.

Checking the Master Data Load

Hi,
If my report doesn't work and I have to check the Master data is uploaded properly or no, How do I check that?
Can you help with the steps?
Thank you.

Hi Radha,
The shortest way to check the Master data of any info object is:
Goto SE16 or SE11:
In the table text box give: /BI0 or C/MXXXXXXXXX
'0' for SAP generated infoobject
'C' for Customer generated infoobject
View of MstrDtaTbls: 'M'
Master data tab: 'P'
SID table attr.: 'X'
Text Table: 'T'
XXXXXXX - infoobject.
Hopes this helps.
Regards,
Ravi Kanth

Basic Problems with Attributes and Data Loading

Hi Specialists,
I have a basic understanding Problem. I will explain it with a simple Example. I have to load Employee-Data from a file. For each Employee we have
EmployeeNo
EmployeeName
EmployeeLanguage
My Modelling:
1 InfoObject Employee, with EmployeeNo as Key and EmployeeName as Text. For the EmployeeLanguage I create an additional InfoObject, in order to have an Attribute EmployeeLanguage at the InfoObject Employee. So far so good (I think).
What kind of DataSources have I to create?? It is necessary to load the possible Languages first?? If yes, what kind of DS I have to choose, for loading only "English", "German", "Dutch". Attribute? Text?
If not, the loading process is not possible, because one language exists more than one time in my flat file.
Hope you can help me to see it clear.
Thanks.
Denise

Hi Denise,
I don't think you have to load all possible languages first. This is only necessary if you also want to load texts for EmployeeLanguage (example language german with texts "german", "deutsch", ...).
Specify Employee as data target (in tab Master Data / Texts) and assign your InfoArea. There you will find your targets for texts and attributes, now create InfoSource for your file and assign update rules for both texts and attributes.
Best regards,
Björn

Problems with the Oracle Pre-Load actions in an homogeneous system copy

Hi,
I am trying to do a NW04 homogeneous system copy, and I am having troubles with the ABAP copy. (Oracle Pre-Load Actions step)
I am with the database specific procedure, so I am creating the new system until the sapinst asks me to bring an online-offline backup and the control file, then the sapinst tries to recover the database by himself, but he finds trouble:
Error: CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01194: file 1 needs more recovery to be consistent Ora-01110: data file 1: 'oracle/XIE...'
If I try to do the recover manually I have to make the usual:
RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE;
CANCEL
ALTER DATABASE OPEN RESETLOGS;
If I follow the sapinst.log I find that the sapinst tries to recover the database but fails with the above message and:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
Yes, that's true, if I make it manually I have to open the database with the 'alter database open resetlogs';
the problem could be fixed modifying the run_control.sql statement that the SAPINST creates at the working directory, but no modification to that statement is possible because the SAPINST deletes and creates the statement IMMEDIATELY before executing it, so what can I do?
Many thanks
Mario

SOLVED
for your info, the run_control.sql is UNMODIFIABLE, but I could modify the CONTROL.SQL that he calls, so I recovered manually the Database, and the CONTROL.SQL was a simply CONNECT and then OPEN DATABASE, just like that, so I could continue with my installation, another point for us against the damned SAPINST !!!

Problems with uploading master data in BI 2004S

Hi all,
I wanna upload master data in FI from R/3 System to BI System. I created its transformation. Then, I migrated it WITH EXPORT option. After that, I created Data Transfer Process (DTP), I didn't change any thing, just "Save and Active". Then I created InfoPackage for it => choose Schedule tab and press Start. Open DTP and choose Execute tab -> press Execute.
1. In the case of successful process (the log showed no errors), How can we check that data is transferred successfully?
2. Case 2: I did all above steps for a data source. But when I opened InfoPackage -> it said "This InfoPackage has been already in Process Chain"... I still continued to execute its DTP but I failed. The log said that the data was duplicated.
What does it mean? And what should I do in this case?
3. Case 3: I have a data souce Account Type with <0ACCT_TYPE_TEXT> (icon dialog). I migrated it but failed. Then, after I refreshed, this datasource moved to the group that had been migrated before (in the end of the tree) but <0ACC_TYPE_TEXT> disappeared.
So, I cannot create DTP or InfoPackage for it to transfer. In this case, Do I have to re-create a DataSource? What should I do?
Thanks in advance.

case 1:
Check there might be duplicate record. as it is a text datasource language may be maintained. U can check in monitor what record is showing error.
case 2:
If u migrate the data source then it is a BI7.0 version.
If u want to recover 3.x datasource then u need to use RSDS .
Then again u can create Data Transaformation and DTP and migrate once again.
then load the data.
Normally if u r working on BI7.0 do all the stuffs(DT, DTP) using 3.X version then do the migration of datasource else if u migrate first and do the transformation then u will have to manual mapping and u may missed and do a lot of mistakes.
Thanks,
Debasish

Problem with the SQL Data Source (Essbase server in Unix Env)

I too have the same problem.
I have setup the Datasource for an Oracle db in the Essbase Server (which is on a Unix Box) using the Oracle Wire Protocol.I tested the ODBC connection in the Server and it connect with the credentials.
But if i choose the same DSN in the EAS and try to connect i get the below error
Error: 1021001 Failed to Establish Connection With SQL Database Server.
I even downloaded a document from the Oracle site.. on the SQL interface in Essbase but i could not find the inst-sql.sh file to enable Essbase SQL Interface on the server. Is this required??
I tried with both the User & System DSN on the server but no luck.
Any help on this will be highly appreciated. Thanks in advance.
Posting in a new thread since the old one is answered and no points available to score.

It can depend on the version, it is different for version 11, further information :- How to define a relational data source in (odbc.ini) V11 Essbase?
Cheers
John
http://john-goodwin.blogspot.com/

HT201699 I'm using an iPhone 4 which i purchased last month, there seems to be some kind of problem with the mobile data network

Hi,
I bought a new iPhone 4 last month, totally fell in love with it untill there was this problem regarding the apn disappearing. I manually added the apn info and it worked fine for some time but soon after I disabled the mobile data/3g connection and enabled it later I always use to get a msg saying "Could not activate mobile data network" even after it being active( 3g symbol always used to be poped up at the top). Though the apn is filled with a valid data it shows me the same msg over and over again. It some times works on rebooting but the rebooting the handset everytime i want to use the connection sounds very pestering. Please suggest me with somehting to get rid of this problem...

https://discussions.apple.com/message/21946322#21946322

Problem with Material Master Data Upload using MM01?

Dear Abapers,
I done recording for uploading Material Master using MM01. I selected respective views at the time of recording. Then at the time of uploading it is not selecting the Quality view and Account1 view. Even I used 'P+' function code. it is working but not selecting the 2 views. Manually, if I select those 2 views uploading successfully.
Could you please let me clear on this issue?
Regards,
Sekhar

Hi Chandrasekar,
Scrolling in the view-selecting screen wont be recorded during SHBD ( Recording ).So you need to first select Basic data1 rather than Accounting 1 or Quality management.Once you are in the basic data screen, fill the required description( if its unavailable ) and then choose the accounting 1 or quality tab.Do a fresh recording with the above approach, your issue should be solved.
Regards,
Kiran
Edited by: Kiran NN on Feb 29, 2008 11:02 AM

Facing problem with standard master data source *0bp_def_address_attr *

Hi All,
I am using BW 3.5 version
I am loading master data form 0bp_def_address_attr(stabdard data source) as part of my daily activities.
this loading is failing frequently throwing following error message
30 duplicate record found. 1243 recordings used in table /BI0/PBPARTNER
ID : RSDMD
message number 199
Is there any way I can avoid this failure?How can I handle duplicate records?
Please help me!!
Warm regards
Nanduri Aditya

Thanks for your answers and sorry for my late reply
Hi Srinivas,
I am using 3.5 there is no ' handle duplicate records' option in info pacakge.
Hi Francisco,
Thanks for your answers,
2 OSS notes are relevant to my problem. Currently I am checking in Dev whether it will fix my problem or not.
Thanks a lot it was avery helpful answer.
Warm Regrads,
Nanduri Aditya

Problem with the master data loads

Similar Messages

Maybe you are looking for