Problems with offical servise

I need to post here my problem.... I have 2 major problems with my xperia z2 (there is no 4G signal and have voice issue)....i send phone to offical servise but when i get my phone back, not only they didt repair mob but they damage my phone and now i even cant use sim card any more....so what to do in this case....how to get new phone

http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

Report generation toolkit problem with office 2000 and office XP

Hello, I am having a problem with running my vi after it is compiled with application builder. The dev machine is an XP box and the targer is windows 2000. I included _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi from the office 2000 section of the install cd (for the report toolkit) in the compile but did not include those files for XP. When I run the application on the target machine (2000), the reporting functions call Excel just fine and the program does not come up with any errors. The program however, is not loading the approprate template and inserting the approprate data. Did I leave some neccessary files out of the compile? Thanks in advance!
Greg
Gregory Osenbach, CLA
Fluke

Hi Acer,
The recommended procedure in your case is to install Microsoft Office 2000 on the development machine and then reinstall the LabVIEW Report Generation Toolkit. When the toolkit is installed, it will check for the current version of Office and install the corresponding VIs to support it. The VIs include different ActiveX calls according to the version of Office. Therefore it is not enough to change the support manually without having the correct version of Office installed first.
However, I would recommend that you just try to run your executable on a machine that has Office 2000 installed. The difference in the ActiveX API for Office XP and 2000 is not that significant, so your application might work perfectly on an Office 2000 machine. If you try to run the executable on a machine with Office 97 installed I'm willing to bet my right arm that you will experience errors.
Good luck Acer!
- Philip Courtois, Thinkbot Solutions

Problems with Office 2011 for mac after upgrading to Mountain Lion

Office 2011 for mac worked fine with Lion on my MacBook Air. I had been having some problems with my computer freezing and crashing, so the folks at the Genius Bar wiped my computer clean and installed Mountain Lion for me.
I have full backups (Time Machine) from before the wipe on my external hard drive, but I was told not to restore from the backup, that I should drag and drop files instead. I was also told to re-install any program for which I had the disk. I reinstalled Office 2011 via the disk.
Two major problems followed:
1.     I lost all my old emails (I use Mail). Even rebuilding the library or trying to restore them from Time Machine don't get them back.
2.     Word and Excel don't seem to recognize me anymore. I can pull up and modify an old document or workbook, but I cannot "save" my changes. I have to hit "save as." That's a pain, but there's a worse problem.
I have no trouble saving these "save as" versions to my desktop or to my Documents file. But I cannot save them anywhere else — even to the folder where I found the original document. I get a message that I don't have the necessary permissions to access or modify the folders. I'm asked to authenticate, and I do, but that doesn't seem to do anything.
I tried Get Info on the workbooks and documents, and I'm clearly granted Read and Write permission.
I've done a permissions repair via Disk Utility. There were some things to repair, but it didn't solve my problem.
I know I can move all documents to an external hard drive and then recreate all the folders, saving all the documents and workbooks "as" but it seems a huge amount of work. Can anybody suggest an easier route or how to get my email history?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: 'resetpassword' (without the 's) and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Is anyone else having problems with Office for Mac and Lion?

Since installing Lion 10.7.1 on a macbook pro 2.53 Ghz 4GB 1067 MHz DDR3 I have had no end of problems. Both Excel and Word hang, crash and saving an Excel file is a pain. A 12mb spread sheet just took 4 minutes to save! I have MS Office for Mac 2011 version 14.1.3.
Another problem that may not be related to Office is that opening Finder is so slow and most of the time it takes a minute to display folders in Desktop or Documents.
Any suggestions would be welcome .. I regret installing Lion .. I had no problems with Snow Leopard!

botro wrote:
I'm unable to install the MS Office 14.1.3 update - I keep getting "Installation Failure"
I have not found a solution on this board or Microsoft community
This thread had some things to try.

Problems with office after upgrade to ERP 6.0

After upgrade from R3 46c to ERP 6.0 , we installed sap gui 710 with patch 14 and in many frontends a new version of Microsoft Office 2003 SP3.
In many PCs now we have a problem with macros and templates from PA20 transacction with Documents Management.
We try to execute a Wor for a personnel number with infotype 910 and I have the nex messages when Windows open the Word 2003.
"Al abrir este domento, se ejecutará el comando SQL siguiente:
SELECT * FROM C:/DOCUMEN1andreaCONFIG1TempDatasource_tab.SAP
Los datos de la base de datos se colocarán en el documento. ¿Desea continuar?"
If you select "Si", appear another message ~SAP(BA6580C1-BE84.... es un documento principal de combinación. Word no puede encontrar el origen de datos"
When, word document is dsplayed, we only see name of variable and they are not reeplaced by its value.

Sorry, but the note is in Spain (I guess), can you please translate?
We have the same issue on our productive HR system - but not on the development system, what makes it curious.
When we try to start contracts in word we get the same message
"Opening this will run the following SQL command
SELECT * FROM C:\.....Datasource_tab.SAP
How can we avoid this message?
Thanks in advance!

Problems with Office Plugin

Hello!
I'm having problems with the Rights Management Office Plugin. Adobe Pro is working fine and connected properly with the LiveCycle server, but when i try to configure the LiveCycle Server in the Office Plugin (in the office 32 bit version) i get an error about the certificate, something like "It was not possible to find the site certificate, contact your administrator..." any ideas of why is this happening?
Thank you so much,
Best regards

Hello everybody,
I am not quite thrilled by the idea of uninstalling a Microsoft patch in order to use this add-on. Leaving a known vulnerability unpatched at the expense of using an application feature is not my sense of complete security.
Is Adobe aware of the situation? Is there a fix available from Adobe? How can we engage Adobe on this?
Thanks in advance for all your answers and help in this matter.
Thanks
Mayank

Visio 2007 launch problem with Office 2013 installed "Please wait while Windows configures Microsoft Visio..."

Running under WIN7-64 bit with Office 2013. Requests reinstall every time it is run. Tried uninstalling and reinstalling. No change. Office 2013 does not recognize that Visio 2007 is installed. Copy paste operations between Visio and Word 2013 don't
work. Tried disabling sharepoint access for Visio 2007 and did a repair for Office 2013. No change.Tried various compatibility modes. No change. Ran Microsoft troubleshooter which verified there is a compatibility issue but provided no solution.
Tried the following...
Type the following command, and then press Enter:
reg add HKCU\Software\Microsoft\Office\14.0\Visio\Options /v NoReReg /t REG_DWORD /d 1
no change

Hi,
Based on the situation, I recommend you try to use locale administer account to login in the computer.
Then we re-install Visio 2007, if you solve the issue,please let me know.
Regards,
George Zhao
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Ios6.0.1 = Problem with office network desktop computers

Hi,
We have a few iPhones connected onto our office computer network via a WIFI router.
While those iPhones were running IOS 5, we had no issues.
Now, since IOS 6 - and even IOS 6.0.1 is running on those iPhones, I have 2 iPhones causing network issues to DESKTOP COMPUTERS when connected to the office network through WIFI.
Basically, when those iPhones are connected to our network via WIFI, always the same 2 desktop computers then have network connectivity issues.
Those computers have the following IP address:
Computer A: 192.168.1.92
Computer B: 192.168.1.103
When let's say iPhone A is connected to the WIFI router, then Computer A starts to have network issue - ping does not work anymore - or only randomly - user cannot printed - computer cannot connect to Windows Shares anymore.
I have found about that by changing the IP address of the computer the problem was then solved.
I have then check the IP address used by the iPhone A ... it is not the original one used by the Computer A ... It is a different IP address provided by our DHCP server ... so the problem is not there (?).
I then ran an nmap request on 192.168.1.92 while Computer A had issue ...and found on that the MAC ADDRESS reported was not the one of Computer A - but the one of iPhone A !!!
So, when iPhone A connects to the network via WIFI - it seems to confuse the switches despites not having the same IP address ...
If I ask my collegue to switch the WIFI off on his iPhone, then the problem disappear straight away ... No more issue with the computer and its IP address 192.168.1.92 ... and nmap then reports the correct computer MAC ADDRESS.
The same problem happens with Computer B and iPhone B ...
We have RESET NETWORK settings on both iPhones but this did now solved the issue.
Can someone help out ?
Thanks & regards
GL

I'd say the scope of your dhcp server is probably overlapping your fixed ip addresses on your desktops
Could be due to the lease time the reason your not seeing the ip addresses on the devices you expect
Could also be a rouge dhcp server somewhere

Problems With Office Network

At my office they just expanded to take over the second half of our building and put doors in, etc. This got me moved to nice, big, quiet office in the new section.
Naturally, someone ran the ethernet cables over to the new offices. Now I can no longer connect to the other Mac in the old office. On my Mac nothing from the old side of the building shows up in Network in the Finder. The other Mac cannot see me but still can see all the other computers on that side.
I can find computers hooked up on this side but not the other. If I put in the other Mac's IP address I can connect, but this is a hassle because we can't use static addresses, so I have to go look up his address from time to time. But he cannot connect to me using my IP address.
With the move I did notice that my router address changed completely so that all the IP addresses on this side of the building are very different from the other side. I don't know enough about networks to know why this is so, I should still be on the same network as the rest the office, only one router into the building as far as I know.
The weird part is that I can connect to the other Mac using the IP address, so that means my computer can see his, even though he can't see me and our Macs don't show up in the Network in Finder.
What's going on and is there a simple way to get one of us to show up in the Finder Network so I don't have to keep getting his IP address.

Looks like you may have to open certain ports that might be required by WECM.
Couldn't really find too much, but from what I did manage to find, it looks like 2948 is the port you need to forward to your laptop.
Before you do that though, are you on the latest firmware for the E4200?
Just to ensure that there isn't anything else that may be the problem, it's always recommended to be at the latest firmware. Also, before forwarding the port, you could try adjusting the MTU a little as well. Reduce it to around 1472 bytes, and keep going down to around 1365 bytes by decreasing the value by 20 bytes each time. It may well just be an MTU issue rather than the ports. In either case, please do post back if your issue is resolved with any of the above suggestions.

Problems with Office for Mac 2011 Outlook

So I've BYOD with my work, but having difficulty in accessing my Outlook email on the work's server. I keep getting the following pop-up for the mail stating that Outlook has redirected to the server (name of server here) to get new settings for your account (name of email account here). Do you want to allow this server to configure your settings? I havce the option of to Deny or Allow, both of which have been tried. The pop-up still pops-up no matter.
What our PC-oriented tech department has discovered is that it is being routed to an incorrect address. They have no idea where that address resides and we need to figure out how to insert the correct address into the correct place within the software.
Can anyone help me?
Thanks.

there seems to be something wrong with the Office for Mac software getting things right on that platform on that machine
Then that would be a question for Microsoft' and their forums. It's up to Microsoft to maintain compatibility with the OS, not vice versa.
when Lion came out, there were others who had some issues wtih Outlook
Lots of sofware has issues if not updated to be compatible with new operating systems.
I was hoping someone who got things right might see this and response.
This has nothing to do with Outlook..it's running as it should. The problem is that the autodiscover feature on your company's exchange server is not configured properly and is telling Outlook to point to that incorrect address. It's up to them to fix the autodiscover settings on the exchange server.

Problem with Office document structure when exporting in Windows vs full-text indexing in SQL Server

Post Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian Perreault

Post Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian Perreault

Automatic Contribute 4 Update Causes Problems with Office

I have several users that have been using Contribute
successfully for a couple years now and were on version 3.0. They
received a popup that requested that they update to Version 4.
They did and then everytime they tried to open Word, Excel or
another office product it would conflict with Contribute.
Is there a known fix for this? if not how can I prevent the
users from receiving the upgrade popup?

Hi,
Can you try the following work arounds and provide me
feedback:
1. Close all MS Office apps. Go to control panel, Choose
contribute
and click on Change button. Try to Repair the
contribute installation
and verify if the same thing happens again.
2. Another alternative could be to Uninstall and re-install
Contribute
3. Also as we are trying to reproduce the problem in the test
machines, it would be great if you can list us the applications
that you are running on your machine and mail me at
[email protected]
Thanks
Manoj

Problem with Office 365 Home - Setting up mail account

Would like to use Office 365 Home with SBS 2003 ? Will this work ?
Receive an error "The resource that you are trying to use is located on an unsupported version of Microsoft Exchange. Contact your e-mail administrator for assistance"
Thanks

Hi,
Based on the description, you wanted to create Outlook profile to connect to Exchange 2003 on SBS 2003. But you got error message. Is it right?
What’s your Outlook version?
Office 365 Home is compatible with only Windows 7 or later, and Mac OS X 10.6 or later. And Outlook 2013 doesn’t support Exchange 2003.
For more detailed information, I recommend you ask in Office forum which is staffed by more experts specializing in this kind of problems. You might get better help there. Thanks for understanding.
http://social.technet.microsoft.com/Forums/office/en-us/home?forum=outlook
Best regards,
Belinda Ma
TechNet Community Support

Problems with Office 2004 on Leopard

I'm having trouble with Excel 2004 since i upgraded to leopard. Keyboard quits working and then the program crashes. I checked the Microsoft site and they seem to think the problem is with the OS Leopard. Anyone else having issues with Excell or Word?

Its easy to blame OS X without giving a reason why - in cases like this the easiest thing to do is to lay the blame at the feet of OS X without any substantiation.
Is your OS fully updated or are are there further updates you can download? There may be, for example a keyboard firmware update you need to install.
There may also be some updates for Office you can install.
Also bear in mind that Office 2004 is not Intel native and uses [Rosetta Emulation|http://www.apple.com/rosetta>. Upgrading to Office 2008 may also be worth considering as it is Intel ready.

Problems with offical servise

Similar Messages

Maybe you are looking for