Problems with playback of dvd on another dvd player

When I playback a dvd I've created, once in awhile I'll get a little stutter in the picture and sound. Not too often, but it occasionally happens. If I reverse the dvd picture to somewhere just before the stutter and play again, there is no stutter.
I'm thinking it is an issue with the dvd player and not the burned dvd itself. Am I correct or could it be something else?

Need more info on the DVD Player like brand and model number.
Also what media are you using?
Might be as easy as using a quality DVD Lens cleaner kit from Maxell or 3M.
SDMacuser

Similar Messages

I am having a problem with playback in Final Cut 6.0.6

Hello,
I am having a problem with playback in Final Cut 6.0.6 of 1920x1080 60p footage.
I transcoded MTS files shot on a Sony NEX FS100 into Apple Pro Res mov files but the
playback stutters in Final Cut and QTime making it impossible to edit. Is this because the files
are just so big the computer is having a problem processing them? If so what should I edit in to preserve the
best quality?
I am Running Mac OSX 10.6.8
2x2.4 Ghz Quad Core Intel
32 GB 1066 MHz DDR3
Admittedly my FCUT is out of date, I intend to up to X when I finish off an ongoing project.
Thanks Luci

You might consider running diskwarrior on your drive (alsoft.com). And run diskutility, repair disk. A corruption of the drive could cause problems. Also, drive speed starts to fall sharply as the drive gets full. Make sure you have a minimum of 10% free space on the drive. You might also get a utility to check the speed of the drive. I think Aja has one.
Also, do you have anything else connected to the firewire bus? If so, try disconnecting it. You might also try disconnecting ethernet and turning off your airport. Resetting your fcp preferences couldn't hurt.
https://discussions.apple.com/docs/DOC-2491

Problem with playback device message..

problem with playback device message.. been reading up about this problem but so far nothing has worked for me.. i have windows 7. Been trying to find the place in here to get some help but have no idea how this works. So if someone reads this.. please HELP me. Cheers

What OS are you running? What's the model of your computer/audio device? What does Skype list as your playback/recording device?

Windows 10 updated - Skype problem with playback device

Hi, please advice on how to correct the error with Skype - problem with playback device.I have updated all drivers

Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
(i.e. compress DxDiag.txt ---> DxDiag.zip)

Solutions to "Problem with playback/recording devi...

I've only had a few microphone/audio problems with a friend on Skype not being able to hear me or vice versa, nothing that couldn't be fixed. Usually the call would at least pick up even if there was no sound going through. But just out of the blue two days ago (Monday, May 4th), when my friend tried to call me, the call dropped without any explanation. I tried also to call, but then every time, it wouldn't even last long enough to ring and it would just drop. It kept having a notification saying "Problem with playback device" or "Problem with recording device". I've tried signing out of Skype, restarting my computer, checking all monitor audio levels, etc... I always keep my Skype up to date, but I checked again for any new in case that would allow the call to go through, but it didn't, even after I updated it to the lastest version 7.4.0.102. I tried calling Skype Testing Service a million times, but still the call won't even stay on long enough for me to read what it says under the microphone and speaker box after clicking on the connection icon; all I have time to see is "can't access sound card". The thing is, I can hear the millisecond of ringing tone, the sound it makes when the call drops, and all other sound Skype makes, so it's not a question of all sounds being on mute, but for some reason it says I have a problem with playback and recording device! Why is that?? I already searched here in the community Q&As for possible solutions to fixing the problem, but double-checking the audio settings under Tools > Options has not changed anything unfortunately. PLEASE HELP!!!

I've never seen that message. What exactly did it say? You're using the native media from the T3i, it hasn't been converted, it's never been inside of Final Cut Pro?

Problem with Playback device on windows 10

Just today i downloaded the new Windows 10 update and i like it for the most part. But i went on skype today for a video chat and a pop up came up saying that i have a problem with playback device and i cannot video or voice call. skype worked fine yesterday on windows 8, need solutions ASAP.

Do minimize the chances of having issues with other audio/video devices: 1. Uninstall Cyberlink Webcam Splitter. It my not work properly in Windows 10.2. Disable Stereo Mix. You can also download and install the latest Realtek Driver suite even if you have the latest/same drivers installed. The suite can resolve issues. Download and install the latest generic Realtek audio drivers (High Definition Audio Codecs - 64bit Windows 10)http://www.realtek.com/downloads/ I've outlined most of the causes and solutions here:http://community.skype.com/t5/Windows-desktop-client/Problem-With-Playback-device/m-p/3356467/highlight/true#M282763

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

Problems with playback when burning to DVD or saving as MPEG

My movie looks fine when viewed through Adobe Premiere Elements 9 but then when I burn it to DVD or save as an MPEG the footage appears jumpy. I have tried deinterlacing and this improves it but doesn't fix it. Any suggestions on what I can do to help with this.

Now2011
Is the jumpy uniform or mostly at point of major motion in the content?
Have you tried applying just Field Options/Reverse Field Dominance? If so, any better, worse, same as if you had just selected Always Deinterlace?
1. Is you source media interlaced or progressive video? If interlaced, is Fields = Upper Field First or Lower Field First?
2. When you save an "MPEG" file, what are you setting for Field Order (See Advanced Button/Video Tab)?
Note DVD-VIDEO on DVD disc is standardized as interlaced with Field Order = Lower Field First.
3. Is jumpy = flicker, double looking images, or just plain jumpy?
ATR

PROBLEMS WITH PLAYBACK ON DVDS - BURNED WITH iDVD8

Can anyone tell me what is the best speed to use when burning a DVD. I have been using the maximum speed (which I believe my computer defaults to). When I play back on a DVD player it will freeze in certain parts. When I have finished burning the DVD I have noticed grease marks and other small marks on the disc. I have been told it is because I am burning them too fast. I have since tried using 2X and am having the same problem. I am using IDVD8 and DVD-R discs.

It may be the brand of disc. Try Verbatim DVD-R or Verbatim DVD+R DL.

Problems with audio in quicktime file for dvd authoring

i have converted sequence into quicktime file for burning into dvd. i have am experiencing some problems with voice over which disappers and comes back later in the quicktime file when i play it. this quicktime file is made as self contained movie. I have traced this back to the original sequence in the timeline to a white line or series of line in at the top of the time line. one is for video and the other is for audio. when the first line appears the voice over gets interrupted and audio stops in the quicktime file but its ok in the timeline. when the white line shows again the voice over can be heard again in the quicktime file and audio stops again at the start of another white line. there is no loss of audio in the sequence in the timeline. so please can someone help me understand what the problem is.

thanks tom. i am refering to render bar in the timeline, upper for video and lower for audio. May be i shoud describe them as white line gaps between dark grey or steel grey bar color.
what do you mean by down mixing? please advise

Problems with connection Creative zen M and DVD-CD pla

Hi,
I have problems whem i connect my zen to the DVD player. I've connected zen with a cable going from the headphones to the audio line in (red and white) at the back of the DVD system. I get sound but the problem is that my zen automaticly switch to the FM radio mode, when it should be playing from the music libary. This happens by 70% of the numbers. How can I deal with this problem?
Problem 2 is that I hear a strong noise when I connect my zen to the DVD player. It's al low sound which comes back in all the 5 boxes en sounds like a bee...
Problem 3 is that I can't get the full volume on the DVD system. Even when zen is max on 25 i've to put the DVD system also max before a normal sound is coming to me...
Can anybody please help me? Thanks!

Hi there,
. The reason the ZVM is switching to fm radio is because the headphone jack also supports a wired remote that controls some of the ZVM functions there will be some sort of back feed from your DVD head unit to the ZVM causing this to happen.
2. The headphone jack does carry a bit of noise when used with line in applications and compared to the line out function of the ZVM is muffled and lacks power(this also could be noise in your DVD unit).
3. Same as above(2) the A/V out function has a set volume and is louder and much clearer than the headphone out jack.( The line out is the A/V out function of the ZVM found in the supplied adaptor that plugs into the bottom of the ZVM)
To overcome this problem simply use the line out function of the ZVM either through the dongle and an A/V cable or get an after market cable to suit and that should solve your problems with this type application.
Let us know how you go with it
Heres the bits
http://us.creative.com/products/prod...7&product=4484
Or you can search for a cable that plugs straight into the bottom of the ZVM and has rca's on the other end, you should be able to find then via a search here or through epizenter.net in one of the threads
Message Edited by AussieBoy on 08-0-2006 09:50 PM

Problems with Playback

Hello there, I did a search for this topic but couldn't really find an answer in the immense volume of topics, so I apologize if this is a common thing. I just got a new computer and have more than enough memory/processing power to run my itunes flawlessly, but every time I play a song, there's little blips and the songs skip for some reason, not like a little pause and then play again, but it just sounds like a scratchy cd or something. I have the 64-bit version of Vista, and I have the 64-bit version of iTunes, I just cannot for the life of me figure this out! If anyone has any tips, that'd be greatly appreciated!

For some reason, DVD got stuck about one minute in.
Playing on your PowerBook? If so, create a disk image and use DVD Player software to play "the DVD." If it fails that way, there must be an issue within your project.
The confusing thing is, store bought DVDs playback with no problem.
It's not confusing when you realize that you're comparing apples and oranges. "Store bought" DVDs have physical pits. You are burning dye with a laser.
You might find this interesting:
http://www.macintouch.com/dvdproblems5.html#oct03
File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Problems with playback & other issues

Hi All,
I have been a Mac convert for just over a year now but just finished editing my first home movie with iMovie and am very happy with the results. A few questions if anyone can help;
My set up is; iMac G5 1.8, OS/X 10.4.8, 512 mb ram, iLife 05, external lacie dvd burner, TDK DVD - R discs. My footage is in DV Widescreen.
1. My only major problem at the moment is some defect in picture and sound in my movie. The total film length is about 50 mins, at about 14 mins in when paying back through my dvd player the picture starts to slightly judder, some pixelation occurs and after about 10 seconds the dvd just stops playing. If I jump to the begging of the next chapter it plays fine again. If I rewind back to that position it gets choppy again, in total there seems to be about 1 min or so where it is stuttering, most of this will play through eventually apart from the one part which jus stops. I have burnt the disc using both iDVD and Roxio toast and it happens in the same place in the movie. The movie plays fine whilst in iMovie and the dvd also plays ok on my Mac. But they have the same problem at the same place when playing on my dvd/tv.
2. When burning via Toast lite the graph shows I have used approx. 90% of the disc capacity (single layer). When I burn in iDVD it tells me my movie is only 1.7gb. Given that the movie is 55 minutes long with a fair amount of mp3 audio 1.7gb seems very short, this would indicate I could burn the movie twice on one dvd. Can this be true? Is it being compressed so that the final outcome is of lesser quality than burning with Toast? I have the settings in preferences set to 'quality' rather than performance. Whilst on the subject, is there anyway of knowing roughly how big the project is whilst in iMovie or do I have to wait until i get to iDVD to know if the movie will sit on one DVD?
3. WIth relation to the above, what is the most best application to use for burning when the highest quality, iDVD or Toast?
4. When in iMovie and I select file/share/iDVD, iDVD opens but the movie is not brought across to the application. The only way to getthe movie is whilst in iDVD go, file/import/video/..and then select my movie. I have tried a couple of movies.. the setting are not 'only import selected clips'. What could be the problem?
5. Not really a question but would apprecite some input. When i first tried to burn my dvd it would not work at all, I could not locate my external drive through iDVD. I was told by someoe in the apple store that iLife 05 does not recognise third party burners and I would have to upgrade to iLife 06. This was confirmed by reading a post on this site. I got hold of roxio toast and burnt my movie through that. However, a couple of days later I was in iDVD and accidentaly pressed the burn button and, hey presto, the dvd draw on my external burner opened.... I can now suddenly burn through iDVD on my external Lacie DVD burner...any ideas why?
Thanking you in advance,
DJ_m

afaik, the common reason for "weird disk behavior" is some incompatiblity of your media and your burner...
in the analogue-days, any tape worked with any recorder...- disk burners seems to be more.. "touchy".. I own two Pioneer burners - one eats Sony media, the other not.. :-/ odd, but a fact.
Verbatim have the best track record here.. so, "try a different brand" is the usual answer to your question...
set iDVD to best performance.. the Apple wording is confusing..
mp3 audio can be added to iM projects, but the internal, native format is aiff/48Khz .. if time and tools allow it, convert your audio BEFORE usage in iM ...
iDVD is an authoring tool with basic burning capabilities, Toast is a multi-format burning app with some authoring capabilities..
common workflow here is: use iDVD to author the disk, choose in its menu "create disk image"; mount that generated .img with Toast, choose 1x or 2x burn speed, burn disk ...
ad 4) .. hmm? no real idea ... do you store your iM projects internally, in the "Movies" folder? ..
ad 5) one of the main features of iDVD5 was the usage of ext. burners, .. that salesperson gave bad advice, but did a good sale.. (that's why they are called "salesperson", not "adviceperson".. bad joke, sorry. .. )
did I miss any questions... ?
finally: you gave an excellent and detailed discription of your problems..
but, I don't see any problems generated by iM (except that "transfering" to iDVD problem...); I would locate your trouble within iDVD, precisely: in "burner+media" compatiblity..

Problems with playback for Rhapsody To Go songs on Zen V P

So I have been trying to work with customer support on this issue, and it has been frustrating. I can fairly reliably cause my Zen V Plus to freeze while playing some songs from Rhapsody to go. I was wondering if anyone else either has had similar problems, or can try to reproduce mine. I have been able to reproduce using 2 different players (exchanged within 30 days of purchase), and from two different computers, so I don't think the song is corrupt. Here is my correspondence with creative, which contains enough detail to reproduce. I re-ordered for easy reading, but the content is the same:
My first email, with the problem:
I use Rhapsody to go, and I had songs stop
playing in the middle of the song. The player stops moving the seconds
count down, but the play indicator is still showing. I have to press the
play/pause button, upon which the player shows the song paused, and then
I have to press play again. This happens on a bunch of different songs,
but seems to happen on roughly the same place on a particular song. I am
running the latest firmware, and I have exchanged the player once
already and have the EXACT same problem, so this is a firmware problem,
not a hardware one. Once it starts happening, it will happen VERY
consistently on a song, I can restart the song, and it will almost
always hang again in the same spot. If I turn off the player and turn it
back on, it will play through. I have a playlist that has "Hey There
Delilah" by Plain White Ts on it, as the first song. This song always
hangs at 2:07 when it hangs. I have gotten it to hang by turning on the
player when the playlist is already loaded, and playing this song, and
restarting the song a couple of times. It seems that the songs will play
through until I start using menus or buttons, or changing the play order
or restarting the songs...then it gets in a state where it freezes on
some songs, like the above mentioned one. Once I restart the player, it
will play through, so long as I don't do too many things. I haven't
figured out the minimum necessary to reproduce every time, but it
freezes fairly often on the above song, and can be reproduced fairly
easily (on two different players). I would consider this a fairly
critical problem, in that it involves randomly having music freeze on
me, and I can't exchange the unit or send it in for repairs, since I
have tried that. Please advise, or let me know if you need more details.
Their first reply:
Dear Richard,
Thank you for writing in to Creative Technical Support Services, we
appreciate the opportunity to assist you.
From the description you had provided, I can see that upon playing song
that came from Rhapsody on the go, it stop in the middle of the song. As
you mentioned, the player stops moving the seconds cound down, but the
play indicator is still showing. Upon pressing the play/pause button of
the player, it pause playing and press play again, it will resume
playing. You added that this issue occured on a bunch of a songs and it
seems to happen roughly on the same place on a particular song. You also
added that you have already updated your player firmware. I can imagine
this is a frustrating experience. I apologize that you are having issue
with this product and it is causing you to not enjoy it as intended.
Initially, you were provided with some basic suggestions on how to
troubleshoot the issue that you have identified. These tips have
resolved majority of the issues with your product. You may find that
some of the information in this message is repetiti've, but it is still
helpful/beneficial in troubleshooting the issue.
To assist you further, here are some suggestions that you can try:
. First, I would suggest you to play the songs you usually got this
issue on your computer and let us see if the issue persists.
2. If the songs plays fine on your PC, you can try formatting your
player through its recovery mode. Please note that running a Format All
on your player will erase all of the content of your device. You may
want to back it up before completing this process if possible. To
assist you formatting your player, please refer to this link:
Formatting ZEN Micro or other Creative MP3 players
http://us.creative.com/support/kb/article.asp l=2&sid=4779
3. After format all options, please try transferring music files again
that you got from Rhapsody on the go.
If the above resolutions did not figure out the issue, it appears that
your player will most likely need to be sent in for repair/replacement.
If you have recently purchased your product you may also try contacting
your reseller to see if you can exchange the product. If you are unable
to exchange your products a RMA (Return Merchandise Authorization) will
need to be arranged for you to send the product in. You can use this
link in order to arrange a RMA for your Creative Product:
http://us.creative.com/onlinerma
All applicable fees will be assessed at the time that your RMA is
processed in an effort to expedite the repair or replacement of your
product.
Again, I apologize for the complications that you have experienced and
hope that I have given you enough information to resolve your issue.
Please be patient while we are getting the issue resolved. Meanwhile,
keep your Zen safe from bumps, bonks and scratches by getting the Zen V
Series Case. This case is just as tiny and stylish as your player. No
buttons. No stra
ps.
Just a sleek, protecti've design. For more
information on this product, you may want to check out the link below:
http://us.creative.com/products/product.asp category=23&subcategory=27&product=5445
If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service.
My next reply:
Ok, I have tried all of the above, but I can tell you it isn't that I
need to send in the unit. Please remember, I have exchanged this unit
already for another brand new unit and downloaded the songs, and the
same behavior occurred, hanging at the same time even, in spite of the
fact that the song was downloaded from rhapsody from a completely
different computer, onto a different player. I strongly believe this is
a problem with the firmware, and that someone at your company should try
to reproduce the problem. That is why I gave specific instructions on
how the problem is duplicated, so your QA department can try to
reproduce it, and solve this problem in the next firmware update.
Their next reply:
Thank you for taking the time to reply to Creative Customer Support. We appreciate the opportunity to assist you.
In response to your email, I understand that you are experiencing some problems with your MP3 player freezing when trying to play some music from Rhapsody to Go. I know this can be frustrating and I apologize for any inconvenience and/or frustration this has caused.
Regarding your issue, it sounds like it could possibly be an issue with the music. Sometimes music files can become corrupted and they are transferred to the player it can caused it to not function properly. This can often be the cause of a player freezing while it is playing back.
In order to address this issue, I would recommend trying to transfer only music ripped from audio cd's, or try downloading music from a different source. If the problem continues with music that has been ripped from audio cd's, then that could indicate that the player itself needs to be sent in for an RMA (Return Merchandise Authorization). However, if the problem does not continue with the music from audio cd's, then the music from Rhapsody could be corrupted and it may be necessary to try redownloading it from Rhapsody; or from a totally different music provider.
In the case that it looks like the player itself needs to be sent in for an RMA, please follow the link below to get an RMA setup online:
http://us.creative.com/onlineRMA
I hope this helps to address your issue. If there is anything else we can do to assist you, please don't hesitate to contact us. We look forward to hearing from you and ensuring that this issue is fully resolved. Thank you for your patience and understanding.
Christmas is just around the corner, have you started thinking about Christmas gifts Let Creative help you save some time and money! Check out our Holiday Gift Guide: http://us.creative.com/shop/shopcategory.asp category=776&WT.cg_n=Campaigns&WT.mc_id=962 .
If you still require assistance, please reply to this email with any previous correspondence to ensure the quickest and most accurate service.
My next reply:
How would it be that the music is corrupt when the player can play the music properly with no issues repeatedly It is only a problem when I start navigating the menus or moving through the playlist, and then I play these songs. Therefore, the player can properly play the music, until I put the player in an broken state by manipulating the menu choices. Then it freezes on the song. Repeatedly. At the same spot. But after I turn the player off and on again, I can play the song without any issues again. This really seems like an issue with the software. Have you tried making a play list from rhapsody to go with the song I specified, and tried to reproduce the problem If you try, I suspect with a little effort you will be able to reproduce the problem, because I have been able to with multiple zen V plus players, and different copies of the song. I don't know why you haven't contacted the technical or QA staff to try to reproduce this. I really believe it is a problem in your software. I guess I can start posting on the forum, and try to get other users to reproduce, and perhaps that will help convince you it is a real software problem (firmware).
*sigh*
Anyone have any thoughts

And it continues.
Here was there reply:
Thank you for reaching us at Creative Email Technical Support. I appreciate the opportunity to assist you. I am sorry for the trouble you
having.
I understand that you are having trouble with the Zen V Plus player freezing up when you start navigating through the menus or moving through a playlist. I see that in the previous email you were given some suggestion and it was mentioned that it could be something in the music on the player. Yes
it could be an issue with the firmware as well and by reloading the firmware and try music that is from CDs and not Rhapsody to see if this hel
ps.
I see you would like us to contact the technical support on this matter, we are the technical support I do emails as well as phone support and we have spoke with our advanced support group and what we have found is the biggest cause to the issue you are having is corrupt file it is not the only cause but the biggest. If after ripping music from a CD and trying the newest firmware and you are still having the same issue then we can issue an RMA so the player can be sent in and tested and replaced if needed.
I apologize for any inconvenience this may have caused.
If you still require assistance, please reply to this email with any previous correspondence to ensure the quickest and most accurate service.
And my response:
Ok, so let us assume for a minute that it is, in fact, the music. There is nothing wrong with the player physically, I know this because I have the same behavior in another player (remember, I was within 30 days when we started this conversation, so I swapped at the store I bought). So if we assume that it isn't the player, and in fact, the music is somehow corrupt; isn't it still a software (firmware) problem, in that if a music file is slightly corrupt, sometimes it can play it correct, and sometimes it causes the player to freeze? Remember, I can play the song fine, over and over again. But if I exhibit certain behavior with the player (moving around in the play list, or repeating the song again by pressing rewind), it starts to freeze, and will repeatedly freeze. If the music is corrupt as you say, shouldn't the player's firmware handle that more gracefully, but skipping over that bit of song, instead of just freezing? I have had a number of other players, and I have never had this problem with the music before. They all seem to be able to handle any corruption that your player seems to freeze on. (I am not convinced the music is corrupt still, but am assuming it for this argument). Can you please advise whichever team is responsible for the firmware releases that I have a problem that is repeatable, and even if the music is corrupt, do you really want to be the only player on the market that actually freezes when trying to play it, instead of playing through like all your competitors (who will soon be getting my business if this defect isn't at least acknowledged, good grief!).

Problems with Playback in CS5, CS4 (gotoAndPlay command)

I've encountered a really frustrating issue a couple times now throughout the past year, both in CS5 and CS4. I get to a certain point in a project where it just seems Flash does not want to cooperate anymore. It's difficult to even explain what the issue is because it doesn't seem to be triggered by one thing in particular, and often produces different results. It's almost as if the file becomes corrupted.
Here's what will happen:
*I will create symbols and place each one in its own frame on the main timeline, so that I can see them easily. The assets will usually contain animation inside the symbol. When I'm working on a particular symbol, I will put a gotoAndStop command on the first frame of the main timeline, pointing it to the symbol I want to test. So if I'm making a tea kettle, and have placed it on frame 4, I will put a "gotoAndStop(4);" command on the first frame.
*At a certain point, I will start having problems with test movies using this gotoAndStop method, even if I don't change any the scripting. Sometimes it will turn off layers that aren't supposed to be guides. Other times it will show me a blank frame. If I replace the gotoAndStop command with a stop command on the particular frame I want, my project will display correctly.
If it were a relatively small project, I would deal with it and test everything with the Stop command. However, this is a fairly big, complex project, and in my experience, this issue seems to contaminate other files that these assets are copied to.
*I've double checked the scripts inside of the symbol, which are all simple "stop();" or "gotoAndPlay("label");" commands, and there's no error showing up in the Output window.
*The most random things will trigger this problem. Sometimes, it's adding a shape tween to the symbol. Other times, I could turn off the background layer in the main timeline by making it a guide, and all my other layers would show up. But this background layer shouldn't affect anything, as it only has a "stop();" command inside. I was able to fix the problem once by saving the FLA as an Uncompressed Flash Document (xlf). When I opened the new file, it would play back correctly, but eventually, it'd break again.
I was having similar problems in CS4 on another project. In one case, we discovered we could fix the problem temporarily by deleting a single tiny line in one of the symbols. Eventually, it would pop up again, though. Another time, I could fix it by blowing away all the linkage identifiers, but that doesn't seem to be working this time.
It's very odd. Anyone have any ideas?

She didn't export it for CS4. If she had it wouldn't be an INDD file. She needs to export to IDML and you need to realize that this document may not look like it does in CS5.
You do need to upgrade if you want to work successfully with this other designer. Worth noting, in case you don't, is that you cannot upgrade individual components of the suite. Personally, I recommend Design Premium as the best bang for the buck.
Here's why: http://www.theindesignguy.com/purchase-advice.shtml
You find a link a Amazon on that page, which as far as I can tell is the best place to buy with free shipping and for the most part no sales tax.
Bob

Problems with playback of AVCHD

Hi Everybody,
Just trying out the Panasonic AG-HMC151E Camcorder and tried importing a couple of files that I shot. I recorded in PH, the highest quality mode and used the AVCHD 1080i25 (50i) preset. I then simply imported my .mts files from the SDHC Card. Playing back on camera or through VLC shows no problems with the files, but when I playback in Source or Program windows, I get some sort of strange dark flickering, especially when panning. When the picture is still it looks crisp and clear. I tried exporting to H264 and there were no problems with the exported material.
I know that AVCHD can be tough to play with, but I've got a QuadCore and 4GB Ram, can anyone explain to me, what's going on?
Thanks in advance
Cheers,
Jeppe

Glad that you got it sorted.
The Quality settings are interesting. For some systems, Highest is the best. For some systems, Automatic is best. Depends on the source footage and the computer. I know that many users worry, when we tell them to try both and see what works best. It would seem that we should be able to say that one will be the best for all circumstances, but we cannot.
Same for Hardware Acceleration. Our general comments are: if set to min. set to max. If set to max., set to min. If one is better, then increment until the problem returns and then increment up, or down, one "notch." It all depends on one's system.
Thanks for reporting your success, and drop in any time.
Hunt

Problems with playback of dvd on another dvd player

Similar Messages

Maybe you are looking for