Problems with Query-Mode
Hi I get the following error:
FRM-40815 - The var GLOBAL.CG$QUERY_MODE doesn't exist
My application is a master-details and I need to do, an EXECUTE_QUERY, in the trigger When-New-Form-Instance.
Can you help me?
Thanks.
Hi Angel,
The global variable GLOBAL.CG$QUERY_MODE is initialized in the when-new-form-instance trigger at module level. It's in the event code CGBS$STARTUP.
So you cannot perform an EXECUTE_QUERY before this event in the when-new-form-instance trigger. Move your code where you perform the EXECUTE_QUERY to a place after the event code CGBS$STARTUP.
HTH
Lennart de Vos
Similar Messages
-
View with columns based on function - problem with query
Hi,
I'm using Oracle 9i;
I've created a view which has columns based on a table columns (multiple columns from 1 table) and funtion (multiple columns based on 1 function).
The function takes ID as the first argument and name of the column to determine which value to return as the second one.
Here is a sample of such function (simplified):
FUNCTION my_function
(in_id IN NUMBER, in_col_name IN VARCHAR2)
RETURN VARCHAR2
IS
c_name VARCHAR2(100);
c_last_name VARCHAR2(100);
BEGIN
SELECT T.NAME, T.LAST_NAME
INTO c_name, c_last_name
FROM TABLE_1 T, TABLE_2 Z
WHERE T.PK = Z.FK
AND Z.ID = in_id;
IF in_col_name = 'NAME' THEN
RETURN c_name;
ELSIF in_col_name = 'LAST_NAME' THEN
RETURN c_last_name;
END IF;
END;
For simplicty I've restricted the number of columns.
CREATE OR REPLACE VIEW my_view
(ID, NAME, LAST_NAME)
AS
SELECT
T.ID ID
,CAST(my_function(T.ID,'NAME') AS VARCHAR2(100)) NAME
,CAST(my_function(T.ID,'LAST_NAME') AS VARCHAR2(100)) LAST_NAME
FROM TABLE T;
There is no problem with query:
SELECT * FROM my_view;
The problem arises when I query the view (regardles of '=' or 'LIKE'):
SELECT * FROM my_view
WHERE name LIKE '%some_part_of_name%'
The query returns rows for same names, for same it doesn't. If I put '=' and the whole name the query returns nothing, but when I put 'LIKE' and the first letter it returns rows in some cases.
I've tried to debug this situation and I've discovered that the function recives ID not in the proper order and not the same amount of times - in explicit:
for each ID in (1, 2, 3, 4, 5, 6, ... , 100) the function should be called twice for each ID and in the same order, but it does not.
I get 1, 1, 2, 3, 3, 6, 20, 20 and so on.
Help needed.
Greetings.The problem is more complicated than the solutions provided here.
The reason why I'm using the function is this:
the original view was constructed using multiple union all selects and the speed was terrible. I've created the index on the base table to obtain a proper sort. For retriving all records at once the view works perfectly, but if one wants to query by columns based on function the results are suprisng - sometimes there are, some times there are none, or if you serch with "like" and only a part of string there are results, but with "=" there are no results.
Here are real DDLs:
View:
CREATE OR REPLACE VIEW V_DOK_ARCH
(ID_ZDAR, TYP, STAN, DATE_CREATED, CREATED_BY,
DATE_MODIFIED, MODIFIED_BY, SPRA_ID_SPRA, PODM_ID_PODM, PODM_UMOW_ID_UMOW,
NR_WFS, WFS_NR_INTER, UWAGI_OPER, FUNDUSZ, NUMER,
DATA_PODPISANIA, RODZAJ, TYP_PRZY, TYP_UBEZ, NAZWISKO,
IMIE, IMIE_OJCA, NAZWA_FIRMY, NAZWA_FIRMY_SKR, DANE_KLIE)
AS
SELECT /*+ INDEX(Z ZDAR_DATE_CREATED_DESC_I) */
Z.ID_ZDAR ID_ZDAR
, Z.TYP TYP
, Z.STAN STAN
, Z.DATE_CREATED DATE_CREATED
, Z.CREATED_BY CREATED_BY
, Z.DATE_MODIFIED DATE_MODIFIED
, Z.MODIFIED_BY MODIFIED_BY
, Z.SPRA_ID_SPRA SPRA_ID_SPRA
, Z.PODM_ID_PODM PODM_ID_PODM
, Z.PODM_UMOW_ID_UMOW PODM_UMOW_ID_UMOW
, Z.NR_WFS NR_WFS
, Z.WFS_NR_INTER WFS_NR_INTER
, Z.UWAGI_OPER UWAGI_OPER
, Z.FUNDUSZ FUNDUSZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NUMER') AS VARCHAR2(30)) NUMER
, F_Rej_Zdar_Date(Z.ID_ZDAR, 'DATA_PODPISANIA') DATA_PODPISANIA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'RODZAJ') AS VARCHAR2(4)) RODZAJ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_PRZY') AS VARCHAR2(4)) TYP_PRZY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_UBEZ') AS VARCHAR2(3)) TYP_UBEZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO') AS VARCHAR2(30)) NAZWISKO
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE') AS VARCHAR2(30)) IMIE
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA') AS VARCHAR2(30)) IMIE_OJCA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY') AS VARCHAR2(300)) NAZWA_FIRMY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR') AS VARCHAR2(100)) NAZWA_FIRMY_SKR
, CAST(LTRIM(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA')||F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY')||DECODE(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY'),NULL,F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR'),NULL)) AS VARCHAR2(492)) DANE_KLIE
FROM T_ZDARZENIA Z
WHERE F_Rej_Zdar_Char(Z.ID_ZDAR, 'JEST') = 'T';
and functions:
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Char
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN VARCHAR2
IS
c_numer T_PRZYSTAPIENIA.NUMER%TYPE;--VARCHAR2(30);
c_rodzaj T_KLIENCI.RODZAJ%TYPE;--VARCHAR2(1);
c_typ_przy T_PRZYSTAPIENIA.TYP_PRZY%TYPE;--VARCHAR2(1);
c_typ_ubez T_PRZYSTAPIENIA.TYP_UBEZ%TYPE;--VARCHAR2(3);
c_nazwisko T_KLIENCI.NAZWISKO%TYPE;--VARCHAR2(30);
c_imie T_KLIENCI.IMIE%TYPE;--VARCHAR2(30);
c_imie_ojca T_KLIENCI.IMIE_OJCA%TYPE;--VARCHAR2(30);
c_nazwa_firmy T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(300);
c_nazwa_firmy_skr T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(100);
c_jest VARCHAR2(1) := 'T';
c EXCEPTION;
BEGIN
--dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR);
BEGIN
SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
WHERE z.PODM_UMOW_ID_UMOW IS NULL
AND z.PODM_ID_PODM = D.ID_PODM
AND D.KLIE_ID_KLIE = k.ID_KLIE
AND p.KLIE_ID_KLIE = k.ID_KLIE
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, I.nazwisko, I.imie, I.imie_ojca, I.NAZWA NAZWA_FIRMY, I.NAZWA_SKR nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_ZDARZENIA z, T_INSTYTUCJE I
WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
AND z.PODM_UMOW_ID_UMOW IS NULL
AND Z.PODM_ID_PODM = I.ID_INST
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_ID_PODM = a.ID_AGAG
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_ID_PODM = a.ID_AGKAN
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.NUMER_UMOWY NUMER, DECODE(k.TYP_PRZYSTAPIENIA,'P','F','P') RODZAJ,k.TYP_PRZYSTAPIENIA TYP_PRZY,'NPO' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, k.nazwa_firmy nazwa_firmy, k.nazwa_firmy_skr nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND k.TYP_PRZYSTAPIENIA IN ('P','W')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.NUMER_UMOWY NUMER, 'F' RODZAJ,'-' TYP_PRZY,'OPS' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, NULL nazwisko, NULL imie_pierwsze, NULL imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_ZDARZENIA z
WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
--dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR||' ostatni wyjatek');
NULL;
END;
END;
END;
END;
END;
END;
END;
END;
END;
END;
--raise c;
IF WE_KOLUMNA = 'NUMER' THEN
RETURN c_numer;
ELSIF WE_KOLUMNA = 'RODZAJ' THEN
RETURN c_rodzaj;
ELSIF WE_KOLUMNA = 'TYP_PRZY' THEN
RETURN c_typ_przy;
ELSIF WE_KOLUMNA = 'TYP_UBEZ' THEN
RETURN c_typ_ubez;
ELSIF WE_KOLUMNA = 'NAZWISKO' THEN
RETURN c_nazwisko;
ELSIF WE_KOLUMNA = 'IMIE' THEN
RETURN c_imie;
ELSIF WE_KOLUMNA = 'IMIE_OJCA' THEN
RETURN c_imie_ojca;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY' THEN
RETURN c_nazwa_firmy;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY_SKR' THEN
RETURN c_nazwa_firmy_skr;
ELSIF WE_KOLUMNA = 'JEST' THEN
RETURN c_jest;
END IF;
END;
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Date
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN DATE
IS
d_data DATE;
BEGIN
BEGIN
SELECT p.DATA_PODPISANIA
INTO d_data
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA
INTO d_data
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
WHERE z.PODM_UMOW_ID_UMOW IS NULL
AND z.PODM_ID_PODM = D.ID_PODM
AND D.KLIE_ID_KLIE = k.ID_KLIE
AND p.KLIE_ID_KLIE = k.ID_KLIE
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL DATA_PODPISANIA
INTO d_data
FROM T_ZDARZENIA z, T_INSTYTUCJE I
WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
AND z.PODM_UMOW_ID_UMOW IS NULL
AND Z.PODM_ID_PODM = I.ID_INST
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA DATA_PODPISANIA
INTO d_data
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA DATA_PODPISANIA
INTO d_data
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_ID_PODM = a.ID_AGAG
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
INTO d_data
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
INTO d_data
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_ID_PODM = a.ID_AGKAN
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
INTO d_data
FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND k.TYP_PRZYSTAPIENIA IN ('P','W')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
INTO d_data
FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL DATA_PODPISANIA
INTO d_data
FROM T_ZDARZENIA z
WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
d_data := NULL;
END;
END;
END;
END;
END;
END;
END;
END;
END;
END;
IF WE_KOLUMNA = 'DATA_PODPISANIA' THEN
RETURN d_data;
END IF;
END; -
Problem with Append mode in File Receiver
Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod. -
Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.
Hi There
By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
Hope this helps
J.C -
Problem with passive mode FTP server and NAT
Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them. -
if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???
Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.
-
Performance Problem with Query load
Hello,
after the upgrade to SPS 23, we have some problems with loading a Query. Before the Upgrade, the Query runs 1-3 minutes, and now more then 40 minutes.
Does anyone have an idea?
Regards
MarcoHi,
Suggest executing the Query in RSRT transaction by choosing the option ' Execute+Debugger' to further analyze where exactly the query is taking time.
Make sure choosing the appropriate 'Query Display' (List/BEx Analyzer/ HTML) option before Executing the query in the Debugger mode since the display option also effect the query run time.
Hope this info helps!
Bala Koppuravuri -
Hello Experts,
I'm tryng to develop my first application for EP (v7 SP12) with NWDS (without NWDI).
This application has to read and write data in the EP DB (oracle v10).
I'm using:
<u>a Dictionary Project</u> (define the DB Tables)
<u>a Java Project</u> (define class as DAO, DBManager etc)
<u>a Library Project</u>
<u>an EJB Project</u>
<u>an EAR Project</u>
With these projects I can deploy a <u>webService</u> in my EP server.
BUT I have some problem with a query that I'm tryng to sent to my DB through a DAO Class called by my WebService.
The query is simple and correct but it does not work...
This is the error message returned (the query id in bold)
(column names: GIORNO, NOMEDITTA, NOMEAREA, NOMESETTORE)
<i>HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 21 Sep 2007 14:29:57 GMT
Set-Cookie: <value is hidden>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>java.sql.SQLException: com.sap.sql.log.OpenSQLException: The SQL statement <b>"SELECT NOMESETTORE, MIN(? - "GIORNO") AS GIORNI FROM SRS_DATEINFORTUNI WHERE NOMEDITTA = ? AND NOMEAREA= ? GROUP BY NOMESETTORE ORDER BY NOMESETTORE"</b> <u>contains the syntax error[s]: - 1:25 - the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)</u></faultstring><detail><ns1:getGiorniSettori_com.akhela.giorniSenzaInfortuni.ejb.exception.GiorniSenzaInfortuniException xmlns:ns1='urn:GiorniSenzaInfortuniWSWsd/GiorniSenzaInfortuniWSVi'></ns1:getGiorniSettori_com.akhela.giorniSenzaInfortuni.ejb.exception.GiorniSenzaInfortuniException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope></i>
The variable '?' is the today date, the difference <b>"(?-GIORNO)"</b> is an int..
Moreover in my DAO class the query is <b>"SELECT NOMESETTORE, MIN(? - GIORNO) AS GIORNI FROM SRS_DATEINFORTUNI WHERE NOMEDITTA = ? AND NOMEAREA= ? GROUP BY NOMESETTORE ORDER BY NOMESETTORE</b>", instead in the error message is reported <b>MIN(? - "GIORNO")</b>...
We have tryed also with alternative query, for example we used <b>"MIN(SYSDATA - GIORNO)"</b> but <b>SYSDATA</b> was interpreted as column name and not found....
Any help???
Best RegardsHi, I found something about the Host Variable (http://help.sap.com/saphelp_nw70/helpdata/en/ed/dbf8b7823b084f80a6eb7ad43bdbb9/content.htm), there explain that if you want to use an host variable you have to put ':' as prefix..
My problem is that <u>I need to extract the minimum of the subtraction between two dates:</u>
Query <b>MIN(? - GIORNO)</b> --> <i>Error: the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)</i>
So I tried to use the ':' as indicated in the manual..
<b>MIN:(? - GIORNO)</b> --> - <i>SQL syntax error: the token ":" was not expected here
- expecting LPAREN, found ':'</i>
<b>MIN(:(? - GIORNO))</b> --> <i>- 1:25 - Open SQL syntax error: :PARAMETER not allowed
- 1:26 - SQL syntax error: the token "(" was not expected here
- 1:26 - expecting ID, found '('</i>
Then I tried to avoid the MIN() function and I tried to do just the subtraction:
<b>? - GIORNO</b> --><i> - 1:21 - the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)</i>
<b>:(? - GIORNO)</b> --> <i>- 1:21 - Open SQL syntax error: :PARAMETER not allowed
- 1:22 - SQL syntax error: the token "(" was not expected here
- 1:22 - expecting ID, found '('</i>
<b>'2007-09-24' - GIORNO</b> --> <i>- 1:34 - SQL syntax error: first argument of operator "-" must be a number, date/time or interval
- 1:43 - SQL syntax error: arguments of operator "-" do not have correct types
- 1:43 - SQL syntax error: derived columns in SELECT list with AS must be values</i>
<b>GIORNO - GIORNO</b> --> <i>- 1:21 - the group by list and the select list are inconsistent: the column >>"GIORNO"<< is neither grouped nor aggregated
- 1:30 - the group by list and the select list are inconsistent: the column >>"GIORNO"<< is neither grouped nor aggregated</i>
Why these parts of query are not accepted???
I don't understand why... I hope you can help me.
Best Regards
Alessandro -
Problem with "find" mode in adf/swing application
Hi all,
I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
Thanks in advance. Alex.Hi Frank, please look this issue
-
Problem with sleep mode in Win 7
Hello Friends,
I have a great problem after Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it should automatically go to the sleep mode. Unfortunately, only the screen is black and the laptop is still running, I have to shut it down then switch on again. Is it a problem with the 'battery driver'?Please, help me :)Before you continue to wait for solution and waste your time back-up all your important data and reinstall OS again using HDD recovery installation - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
After doing this you will have clean preinstalled and well working OS again.
The first thing you should do after OS installation is to disable automatic Windows update. Do it manually and install important updates only. -
Hi,
I've a problem with my iPhone 3G. In apps like notes, sms or even ipod, it doesn't rotate in landscape mode. But in "not apple apps" the accelerometer is working. I've tested it with Labyrinth LE.
After restoring the device it doesn't rotate too.I have the same problem.
Apple apps (Mail, Safari, Calculator) don't rotate at all (portrait only). They were rotating correctly before.
3rd party apps (Labyrinth, BubbleLevel, Accelerometer Graph) can rotate to portrait and landscape correctly, so this shouldn't be a hardware problem.
Maybe caused by OS update? -
Problems with standby mode in Windows XP
Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?
Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim -
Problems with Query Panel with Table
Hi. I'm having a problems with this component in runtime. I'm using JDev 11.1.1.1 with ADFBC.
The query uses three optional parameters. When i put a value for the first and leave other blank and execute query, following error is produced:
03/11/2009 04:02:28 AM oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator handleError
GRAVE: Server Exception during PPR, #6
javax.el.ELException: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1282)
at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:115)
I couldn't find any reference about this. Please help....
ThanksFrank,
I am also getting the same error. The version I am using is 11g Release 1(11.1.1.2.0)
Here is what I did:
1. created a view criteria on a view object
2. all are optional
3. Dragged the view criteria as a query component (query panel with query table) on to the design layout
and the error when I clicked the Search button is:
javax.el.ELException: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1289)
at oracle.adf.view.rich.component.UIXQuery.broadcast(UIXQuery.java:115)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at sni.foundation.facesextensions.filters.FoundationFilter.doFilter(FoundationFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.ClassCastException: oracle.jbo.common.ViewCriteriaImpl cannot be cast to oracle.jbo.ViewCriteriaRow
at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._clearFilterCriteriaRows(FacesCtrlSearchBinding.java:4549)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._addFilterCriteria(FacesCtrlSearchBinding.java:4603)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:423)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
Thanks
Venkatesh -
i have problems with a query, i need that have the follows fields.
SELECT T0.[DocNum] AS #Doc, T0.[NumAtCard] AS Referencia, T0.[docDate] AS Fecha, T0.[LicTradNum] AS RFC, T0.[CardName] AS 'Nombre del Cliente', T0.[DocTotalFC] AS TotME, T0.[DocRate] AS 'TC Fact', T0.[DocTotal] AS TotMS, T0.[VatSumFC] AS 'IVA ME', T0.[VatSum] FROM [dbo].[OINV] T0
But i need to know if this invoices have a PR, RF, RC,etc.
I saw that ORIN(RIN1) is for -> RC, OINV(INV9) -> RF, ORCT -> PR but i dont know how make a correctly INNER JOIN. When the invoice have a PR giveme Num of PR, if the invoice have a RC giveme the number of document destination.
So, how can i join these tables for get that information.
Thank you for you help.SELECT * FROM ORDR T0
INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
This is a basic inner join created from the SAP Query Generator
Template would be
Select <field names> FROM <base table name>
Inner join <table you want to join> on <<condition you want to two tables to joins>>
or
Simply you can write it
SELECT * FROM ORDR T0, RDR1 T1 WHERE T0.DocEntry = T1.DocEntry
it will do the same thing and you can simply join more tables.
Hope this will help...
Sanjaya -
Performance problem with query on bkpf table
hi good morning all ,
i ahave a performance problem with a below query on bkpf table .
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
WHERE budat IN s_budat.
is ther any possibility to improve the performanece by using index .
plz help me ,
thanks in advance ,
regards ,
srinivashi,
if u can add bukrs as input field or if u have bukrs as part of any other internal table to filter out the data u can use:
for ex:
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
WHERE budat IN s_budat
and bukrs in s_bukrs.
or
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
for all entries in itab
WHERE budat IN s_budat
and bukrs = itab-bukrs.
Just see , if it is possible to do any one of the above?? It has to be verified with ur requirement.
Maybe you are looking for
-
Hi, I met some issue needs your help! I use BAPI to create return sales order, Return an error message "Unpermitted combination of business object bus2032 and sales doc.category H". Can anyone suggest me any solution for this problem? Thanks is advan
-
The iTunes library file cannot be saved. You do not have enough access...
privileges for this operation. What is going on, what do I do? Windows xp
-
I am pretty new to using Crystal Reports and I would like to know how can change the default start date from Sunday to Monday. I have looked around the web to find a solution and I did not find one that worked. I need to be able to change in a Group
-
Replace from clipboard, or "connect overlapping wires" ?
I am going back through many of my early block diagrams and cleaning up the code with things that I've learned since I started using Labview. A lot of this involves deleting objects, then copy/paste from a good reference design into the old design.
-
Graphic Designer looking for a quick script
Hi all, I've been doing a lot of searching and I just can't find it... I'm looking for a script to have Distiller open up .pdf files after it's done distilling. the .eps file. Is there a script that can do this?? Can anyone help me?