Problems with the eway development kit (eDK) on CAPS 5.1.1

Hi all!
I'm having difficulties trying out the eway development kit(CAPS 5.1.1). I would like to create an oracle AQ eway, but first of all i would like to test out the samples included in the documentation, for instance the edkfile eway.
I've build the sar file from the post implementation zip file, and loaded it in the repository.
When looking at the new eway in the designer, the eway don't have any methods. I was expecting to be able to expand the EDKFILE eway and find a method called write.
The same thing happens to the other samples also. I've build the sar files as described in the guide. Maybee I'm missing out on something.. Well, have anyone tried this out successfully?

Hi,
We are using JCAPS5.0 , and I didnt find any eDK plugin with JCAPS,Probabily its available but I am not aware of it or what I didnt know.Can you please provide me information ,how can I develop my own customised eWay and use it in my project.
Thanks,
Renga.S.

Similar Messages

Need help getting started with the ML505 Development Kit

First of all, an admission...I am a newb to the FPGA world. A babe in the wilderness. I am trying to run a simple little logic design to get my feet wet. Four inputs using the WEST, CENTER, SOUTH, and EAST pushbuttons feeding two AND gates which feeds an OR gate which turns on the NORTH LED. I have tried to use the Platform Cable USB to download the project to the XCF32P Platform Flash PROM using the iMPACT software. As of yet I have been unable to get the program to run. The iMPACT program says the programming was successful but after pressing the PROG button, the DONE LED does not turn on. I've tried different settings with the Configuration Address and Mode DIP switches with no success. To anyone using the ML505, given the gear I have at my disposal, what would you recommend? What modes have you used that worked? Thanks in advance.

Here is the latest setup I have used in trying to get my FPGA to read from the Platform FLASH PROM. Configuration Address/Mode DIP switches set to 01011001 as per "My Own Platform Image Demonstration" method in the "ML505/ML506/ML507 Getting Started Tutorial" The Platform Cable USB is plugged into the JTAG connector on the ML505. Its status LED is green. In iMPACT the Boundary Scan reveals the following chain... TDI ----- xcf32p -----xcf32p-----xc9s144x1-----xccace-----xc5vlx50t-----TDO The same mcs file is loaded into both PROMs (xcf32p). I start the programming cycle. It completes and says "Programming Successful" I press the PROG button on the ML505 and the DONE LED does not turn on and the design does not work. With the same chain I add the bit file to the xc5vlx50t so I have the PROMs loaded with mcs files and the FPGA with the bit file. I run the program function again. "Programming successful" is again indicated. The DONE LED lights and the design works. I then press the PROG button. The DONE LED turns off and the design ceases to function. I have also tried this with only one PROM loaded with a mcs file with no success. What am I doing wrong? Am I missing something? Thanks in advance.

Still problems with the Ipod Nano 3g and the Nike+ kit??

I thinking about buying an Ipod Nano and the Nike+ kit tomorrow but now I'm a bit unsure due to some of the problems mentioned here in this forum? Do you still have problems with the commuication between the Nano and the sensor? Are there still problems wtih the distance being wrong or only in km? Should I buy - if possible - a Ipod Nano 2G?
Regards
Morten

Personally I am very happy with my new iPod Nano. It works great with Nike Plus and I love the video and some of the cool features like stopwatch and more. I have an earlier iPod Nano and I was hesitant to buy the new one but I am so glad I did. I don't have any problems uploading data.

Attn: Installing the Sample Applications from the ifs Development Kit

There are a number of problems with the sample Applications included in the
Developer's kit. These need to manually fixed in order to get the demos to work.
#1: Solaris Only
The install of the iFS Development Kit, replaces the existing adk.jar with a new
one containing some additional classes. Unfortunately the install process does not
set the correct privileges on the new version of adk.jar. Please ensure that the
file $ORACLE_HOME/ifs/lib/adk.jar is world readable.
Bug # 1304730
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#2: Generic
There is a problem with the way in which the login.jsp establishes a connection to
the repository. The current code makes incorrect assumptions about the name of the
iFS Service and the schema password.
The following changes are required.
In order to connect to the repository 4 pieces of information are required.
1. The iFS User Name
2. The iFS User's password
3. The properties file to be used
4. The database password of the user who owns the iFS Schema
The Login.jsp needs to be altered so that it requests these four arguments before
attempting to establish a connection to the repository.
(The current version only requests username and password).
All four arguments need to be provided as arguments to the login method on the
underlying JavaBean that the JSP invokes when it want to open a connection
to the repository.
***************** HERE IS THE REVISED CODE FOR INSURANCE APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.insurance.InsuranceLogin" %>
<%@ page import = "oracle.ifs.adk.security.IfsHttpLogin" %>
<html><head>
<jsp:useBean id="inslogin" scope="session" class="ifsdevkit.sampleapps.insurance.InsuranceLogin" />
<jsp:setProperty name="inslogin" property="*"/>
<%
String REDIRECT_PATH = "/public/examples/insuranceApp/claims";
boolean loggedIn = false;
if (inslogin.getSession() != null && inslogin.getResolver() != null)
// Use existing insurance login
loggedIn = true;
else
// No existing insurance login
IfsHttpLogin login = (IfsHttpLogin) request.getSession(true).getValue("IfsHttpLogin");
if (login != null && login.getSession() != null && login.getResolver() != null)
// Use existing IfsHttpLogin login
inslogin.init(login.getSession(), login.getResolver());
loggedIn = true;
if (!loggedIn)
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName");
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null &&
!username.trim().equals("") && !password.trim().equals(""))
// Login using username/password
try
if (serviceName == null | | serviceName.trim().equals(""))
serviceName = "IfsDefault";
inslogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", inslogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The username or Password was not valid, please try again.");
</SCRIPT>
<%
if (loggedIn)
// Redirect to the directory where the claim files reside
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Insurance Demo App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
& lt;/tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td><input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
*************************** END INSURANCE LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS
repository folder /ifs/jsp-bin/ifsdevkit/sampleapps/insurance.
****************************** INSURANCELOGIN.JAVA *******************************
package ifsdevkit.sampleapps.insurance;
* Copyright (c) 2000 Oracle Corporation. All rights reserved.
import java.util.Locale;
import javax.servlet.http.HttpSessionBindingEvent;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.security.IfsHttpLogin;
* The login bean for the Insurance demo app.
* <p>
* This class provide the login info. The class implements the
* <code>IfsHttpLogin</code> interface so it can share login data with other
* login beans.
* @author Edward Yu
* @version 1.0
* @see IfsHttpLogin
public class InsuranceLogin implements IfsHttpLogin
* The <code>LibrarySession</code>.
private LibrarySession m_session;
* The <code>FolderPathResolver</code>.
private FolderPathResolver m_resolver;
* Default constructor required by the jsp spec for the USEBEAN tag
* @exception IfsException
public InsuranceLogin()
throws IfsException
* Make a connection to iFS
* @param username The username to be used for login.
* @param password The password to be used for login.
* @param serviceName The service name to be used for login.
* @param schemaPassword The schema password to be used for login.
* @exception IfsException if operation failed.
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential me = new CleartextCredential(username, password);
ConnectOptions connection = new ConnectOptions();
connection.setLocale(Locale.getDefault());
connection.setServiceName(serviceName);
connection.setServicePassword(schemaPassword);
m_session = service.connect(me, connection);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
DirectoryUser user = m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Initialize the login bean.
* <p>
* The default constructor does not set the necessary fields so it needs
* to be set instantiation.
* @param session The <code>LibrarySession</code> object.
* @param resolver The <code>FolderPathResolver</code> object.
public void init(LibrarySession session, FolderPathResolver resolver)
m_session = session;
m_resolver = resolver;
* Return the login's session object.
* @return The <code>LibrarySession</code> object.
public LibrarySession getSession()
return m_session;
* Return the login's path resolver.
* @return The <code>FolderPathResolver</code> object.
public FolderPathResolver getResolver()
return m_resolver;
* Called when this object is bound to the HTTP session object.
* @param event The event when the object is bound to the Http session.
public void valueBound(HttpSessionBindingEvent event)
// do nothing
* Called when this object is unbound from the HTTP session object.
* @param event The event when the object is unbound to the Http session.
public void valueUnbound(HttpSessionBindingEvent event)
m_resolver = null;
try
if (m_session != null)
m_session.disconnect();
catch (IfsException e)
e.printStackTrace();
finally
m_session = null; // release the resources
*****************************END INSURANCELOGIN.JAVA ******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the complete source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this
code into a new file called. Save the file on the native file system
in a file called InsuranceLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/insurance/
*************** HERE IS THE REVISED CODE FOR WEB COMMAND APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="Author" content="Patricia Li">
<title>Login</title>
</head>
<jsp:useBean id="wclogin" scope="session" class="ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" />
<jsp:setProperty name="wclogin" property="*"/>
<%
String REDIRECT_PATH = "/ifs/ifsdevkit/sampleapps/WebCommandApp/html/main.html";
boolean loggedIn = false;
if (wclogin.getSession() != null)
// Use existing WebCommand login
loggedIn = true;
else
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName" );
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null)
// Login to iFS
try
wclogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", wclogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The credentials are not valid; please try again.");
</SCRIPT>
<%
if (loggedIn == true)
// Go to main page...
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Web Command App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<h2>WebCommand Application Login</h2>
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
</tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td& gt;<input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
************************* END WEB COMMAND LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS repository folder
/ifs/jsp-bin/ifsdevkit/sampleapps/WebCommandApp
****************************WEBCOMMANDLOGIN.JAVA**********************************
package ifsdevkit.sampleapps.webcommandapp;
import java.util.Locale;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.filesystem.IfsFileSystem;
import oracle.ifs.adk.security.IfsHttpLogin;
import javax.servlet.http.HttpSessionBindingEvent;
* WebCommand application that illustrates the usage of the
* File System API.
* @version 1.0
* @pub
public class WebCommandLogin implements IfsHttpLogin
private LibrarySession m_session; // Session
private FolderPathResolver m_resolver; // Resolver
private IfsFileSystem m_ifs; // File System object
* Default constructor required by the jsp spec for the USEBEAN tag
public WebCommandLogin()
throws IfsException
* Make a connection to iFS
* @pub
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential cred = new CleartextCredential(username, password);
ConnectOptions options = new ConnectOptions();
options.setLocale(Locale.getDefault());
options.setServiceName(serviceName);
options.setServicePassword(schemaPassword);
m_session = service.connect(cred, options);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
m_ifs = new IfsFileSystem(m_session);
DirectoryUser user = (DirectoryUser) m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Use the existing connection.
* The default constructor does not set the necessary fields.
* @pub
public void init(LibrarySession session, FolderPathResolver resolver)
throws IfsException
m_session = session;
m_resolver = resolver;
m_ifs = new IfsFileSystem(m_session);
* Return the login's session
* @pub
public LibrarySession getSession()
return m_session;
* Return the login's path resolver
* @pub
public FolderPathResolver getResolver()
return m_resolver;
* Return the IfsFileSystem API object
* @pub
public IfsFileSystem getIfsFileSystem()
return m_ifs;
* Implementation of valueBound
* @pub
public void valueBound(HttpSessionBindingEvent e)
* Implementation of valueUnbound
* @pub
public void valueUnbound(HttpSessionBindingEvent e)
try
m_session.disconnect();
catch (IfsException ie)
************************* END WEBCOMMANDLOGIN.JAVA *******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the comple te source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this code into a
new file called WebCommandLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/webcommandapp/
Compile the java class.
Copy the classfile to $ORACLE_HOME/ifs/custom_classes/ifsdevkit/sampleapps/webcommandapp/
Stop and Start all of the protocol servers.
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#3. Making the BaseRendererClass available to the Protocol Servers
Note this step is not required if you have the 1.0.8.3 patch set installed.
Install the BaseRenderer Class. The BaseRenderer class is delivered in the jar file
ifsdevkit.jar and can be used to simplify the task of creating a custom renderer.
Unfortunately the jar file containing this class is not referenced in any of the Classpaths
used by the iFS protocol servers. This means that they will not be able to load any
customer renderers that extend BaseRenderer. In order to make BaseRenderer available
to the Protocol Servers it need to be placed in the appropriate directory under
<ORACLE_HOME>/ifs/custom_classes.
Extract the class from the ifsdevkit.jar.
ifsdevkit.jar is located in <ORACLE_HOME>/ifs/lib after the devkit has been installed.
jar -xvf ifsdevkit.jar
extracted: META-INF/MANIFEST.MF
extracted: BaseRenderer.class
Create the following directory heirachy in <ORACLE_HOME>/ifs/custom classes
oracle/ifs/server/renderers
Copy <ORACLE_HOME>/ifs/lib/BaseRenderer.class to
<ORACLE_HOME/ifs/custom_classes/oracle/ifs/server/renderers
That should do it.
Regards
Mark D. Drake
null

Moving to Top

Sqljdbc4 driver problem with the latest version of java (java6 update9)

Hi all, sorry for my ingles.Need help with a problem, I have to connect to sql server 2008 from Java, I had install the Java SE Development Kit 6u22, and when the upgrade to the 6u29, the driver stopped working, they let the following example:
public static Connection getConnection(String db_connect_string,String jdbcDriver)
Connection conn = null;
try {
Class.forName(jdbcDriver);
conn = DriverManager.getConnection(db_connect_string); //when you run this line, does nothing mores, nor throws errors
} catch (Exception e) {
System.out.println("Error de conexion." + e.getMessage());
return conn;
uninstall update29, and install that before and had returned to work. Still do not know how to solve this problem with the latest version of java. Any ideas?.
Thanks.

You are not the only one.
MS SQL JDBC does not work with 1.6.0_29?

Is anyone else having problems with the Canon Online Store?

In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Hi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Trying to down load but get error message.... "there is a problem with the Windows Installer Package" Does anyone know how I fix this??

"there is a problem with the Windows Installer Package" Does anyone know how I fix this??
My itunes ends up being so out of date becuase I can never upgrade it.
I have a sports kit and want to make sure I am using the most uptodate version
I managed to delete the old version, just in case it was the fact it was about 10 versions out of date that was the problem but now I can't reinstall it at all......
Please help

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

Problem with the item in complaint

Hello everyone,
We are facing a problem with the customizing of item category in CRM,
Our issue is, we are doing a complaint with items, those items have column where we can see the value, description, quantityu2026
Here is our thing we need to have these columns active or deactivate (grey) depending on the product.
We are not sure if it is possible by customizing of item or customizing of material, or we need a development in order to achieve this requirement.
Any help?
Thank you in advance.

Hi,
If you are having products with different item category groups then you can create different item categories for them.
Then depending on the item category you can do the development to grey out the fields.
But if the product have nothing to differentiate then it would be difficult to carry out the development also.
Regards,
PP
Edited by: PePe on Apr 7, 2010 2:08 PM

Problem with the creation of the _pageflow folder in the portal project

Hi,
I have developed one portal project on the BEA Weblogic Portal server version 9.2. And I am having a quite a number of pageflow portlets in my application.I am facing a weird problem with the workshop(BEA Workshop for Weblogic Platform 9.2.1). It is not generating the folder _pageflow required for all the protlets when we build it.I tried cleaning and building it number of times but it is of no use.
Is it a bug in the weblogic server version or do I really miss something in the workshop settings?
Please help.
Thanks & Regards
Prakash.

Hi Dmitry,
What state are the tasks in? Are they in Active, Running, or Completed? There will only be output files if the tasks are in state running or completed.
Additionally, what is the status of the pool which the tasks ran on? If the pool VMs have been deallocated (or the pool itself has been deleted) then the task files will be lost. This is because the files of the tasks reside on the VM which ran
the task.
Lastly, you can check the file retention time of the tasks in the BatchExplorer UI by selecting the task and looking in the "Task Details" tab for "TaskConstriants.RetentionTime" to see what that is set to - if the retention time has
passed (i.e. retention time was 1h but the task was run 2h ago), then the files will be cleaned up.
It sounds like you already are using BatchExplorer, but we recently published a blog post which has some specific instructions for using BatchExplorer to debug (how to RDP into a VM for example), which you can find
here - it also has some code snippets for how BatchExplorer performs the operations that it does.
Let us know what you find from your investigation and we can help you figure out why your tasks don't have output files.

Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
Feroze

Hi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

Problem with the crystal reports XI

Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek

Problem with the program symbols in quality

Dear all,
I am facing a problem with the program symbols.
I have added new global fields in development, i have called those definations in text names. It is working fine.
After transporting these program changes in to quality these new global definations are not displaying in quality and varibles are not working.
Please give me some suggestion.
Thanks and advance

Hi Chandra,
Please check the following.....
(1)The transport request status in se10 and see if has been successfully imported to QA..
(2)if all the declarations or code have been collected in a Transport and not saved as temporary objects
To confirm the same we have to compare the code in quality and development and see if they are the same
Pls check and revert
Regards
Byju

Problems with the browser

Hello,
I make an aplication where I manage projects, accesing a apex as developer and run my application and it works well.
Then I access to the application as final user and when I modify any data, the aplication does not save the values changed.
What Can I do?

What Can I do?
1. Please tell us your first name and include it in your handle and/or profile to help us.
2. Tell us why the subject of this post is "Problems with the browser".
3. Check your authorization schemes, maybe they enable/disable certain functionality based on who is logged in. But if you developed the app you should already know this, so that's just a wild guess.
4. Show a detailed example, preferably by putting the application on apex.oracle.com to show one of the pages that doesn't do what you want.
Scott

Problem with the "Total By" icon

Hi.
Working with Answer I've a problem with the "Total By" icon when the fact displayed is semi-additive.
I try to explain better:
1) my fact table has the following dimensions
Time (year granularity)
City
Type of contracts
2) the fact table contains the fact "Number of Active Contracts"
this fact is additive by City and Type but not by Year.
The "Number of Active Contracts" is calculated usign 2 existing logical columns
Sum (of Number Of Contracts (at base granularity)) / Count Distinct ( of Years )
This fact express an average when more than year is involed in the aggregation,
but express the exact number of contracts if the year is displayed as an output column of the report.
This fact works well changing the aggregation in reports, but when I click on the "Total By" icon to show
the totals its behaviour is different from expected.
consider the report with the following columns:
Yearm City, Number of Active Contracts
Click her to view it: http://yfrog.com/euerrtotaliconj
The "Total By" icon Instead of the sum divided by ditinct years involed, i.e. 1, shows the sum divided by the number of Cities.
It seem it is counting 5 tiimes (= number of cities) the same year.
But If make a report with
Year, Number of Active Contracts
Click her to view it: http://yfrog.com/mjoktotalj
it works as expected !
Many thanks,
Andrea
Edited by: aromani on 17-nov-2010 8.06

Philipp is right to tell the developer that the toolbar is automatically disappearing after customizing the add-on on the toolbar. I tried it, and it looks like it gets attached to the Bookmark Tool bar. It may help to make sure all the Toolbars are visible in '''View> Toolbars. '''
It may also be because I have too many extensions on my toolbar ( Too many favorites :-))

Problems with the eway development kit (eDK) on CAPS 5.1.1

Similar Messages

Maybe you are looking for