Problems with wifi with AirPort Express

I use the latest model of the Airport Express router to access my apartments wifi with my iPhone, Apple TV, Macbook Air, Ipad.
It usually works very well, however 1 out of 4 times its like the router does not give me access to the internet, even when Im logged into the wifi.
I then click 'Open Network Preferences' - Assist Me and go through the guided tour and then it works fine again.
This is the case with all my devices AND my girlfriends apple devices. We never have problems with other internet connections.
It's like the Express router allows me to login always, but sometimes it forgets to open for the internet so to speak.
Help me please, its really annoying!!

No one??? Please help!
It seems so bad that I can use so much money on all my devices and it doesn't work properly.

Similar Messages

How do I extend my wifi using Airport express with my time capsul?

I want to extend my wifi from my time capsul. Can I do this with airport express? I have my wifi with cable so would I need to get another modem and hook the express to that? Would that help? I want to keep the same network and not add another.

You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
Now in the AirPort utility you should see your iPhone connected to the AirPort

I cant go on youtube with the wifi from airport express, its alway show that the webpage not found so I try to connect the lan to my mac ,its work. Anyone know why amd how to fix it. (only youtube and google doesnt work)

Is this an airport express problem?? Only Youtube and google doesnt work. Its not work only on wifi from airport express. I really have no idea about technical problem.

After the last upgrade, my itunes doesn't open (this happen only the first time after the start of my pc). It seems frozen.To re-open Itunes i need to terminate APS deamon every time from task manager.
What is Apple doing to solve this problema? Thank you.

Is it possible to extend the range of one airport express with a second airport express?

Hi,
We have a Time Warner router and have it hardwired to an Airport Express. Is it possible to extend the range of that one airport express with a second airport express?

... The new AirPort Express that I have is an 802.11n version, but the second one is an older model and I don't know which version it might be. Also, the system recently updated so I'm using the AirPort Utility 6.1.
If you are using Mountain Lion, AirPort Utility 6.1 is the version installed by default. It will not be able to administer "older" AirPort base stations.
For them, use AirPort Utility 5.6 which contains the features you need. It can administer your older Express as well as current production base stations.
AU 5.6 is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

Can i connect an airport extreme (us version) with a new airport express (euro version) ?

Hi, I lived in the USA for a while and moved back to Europe.
I have an airport extreme (US purchased) which i would like to link with a new airport express (EURO purchased) in order to extent my network.
Is this possible ?
I have multiple problems doing so, which leads me to believe the US and EURO product might not be compatible.
Thx for your kind assistance, G.

Connecting routers wirelessly to extend a wireless network is known as a Wireless Distribution System (WDS). Although AirPorts can extend other AirPorts in a WDS, they only work with a few non-AirPort ones...like some Linksys models.
Here are a few articles on the subject:
- http://discussions.apple.com/thread.jspa?threadID=222773&start=0&tstart=0
- http://discussions.apple.com/thread.jspa?messageID=607414
- http://rgbdream.com/?p=44
- http://www.dd-wrt.com/wiki/index.php?title=WDSLinked_routernetwork
Another option, although maybe not as practical in your circumstance, is to connect the AirPort base directly using an Ethernet cable to the Linksys. Then setting up the AirPort as a bridge.

How can I extend an Airport Express in WLAN mode with an additional Airport Express box

I'm trying to extend the existing WLAN with an additonal Airport Express box. I read through a bunch of comment throughout the communities here but didn't find what I'm looking for.
My actual Installation consists:
A Time Capsule attached to the Internet router which set up my 1. WLAN range
This WLAN has been extended with an Airport Express BOX creating my extended 2. WLAN range
Now I intend the extend the 2nd WLAN of the Airport Express BOX with an additional Airport Express (creating a 3rd WLAN range) but don't find a way on how to set it up correctly.
The physical situation of the location dosen't allow me to add / replace cabeling (Ethernet or similar). If there is any chance I'd like to avoid power-line connections. And, I'm aware of the impacted bandwith on WLAN / WLAN extensions, but can deal with this.
Regards and thanks for any advice

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

Will I be able to extend a dual band network from a Time Capsule 2nd generation with the new Airport Express on both bands?

My Time Capsule 2nd generation is the main accesspoint in my house. It resides on the second floor in our living room. On the first floor in our kitchen I have an fairly new Airport Express that extends my network on the 5 GHz band and allows me to stream music via Airplay. I had to choose 5 GHz since the 2,4 GHz band is interfered when using the microwave oven. However, we have a rather old house with loads of metal in the concrete walls and therefore the 2,4 GHz signal from the second floor proivded by the Time Capsule is hardly available on the first floor. Since all our iDevices (iPhones and iPods) operate at the 2,4 GHz band we sometimes don't have a proper wi-fi connection. I had tried before with another (older) Airport Express that only operated at the 2,4 Ghz band, but I could get a proper connection between the Time Capsule and the Airport Express. Therefore I think it would be the best solution if the new Airport Express would provide both bands simultaneously.
If I replace my existing Airport Express with the new one, will I be able to extend my network on both bands?

It sounds like you may have configured your Time Capsule to use a separate name for the 5 GHz network and then setup the Express to extend that specific band.
In order to extend both bands, the Time Capsule setup will need to be changed so that both bands are using the same name. In other words, you would uncheck the option for the 5 Ghz name.
Then, setup the new Express to extend the Time Capsule network.
This is the only way that they Express can extend both bands. It cannot extend both bands if you have assigned a separate name to the 5 GHz network since you will be forced to choose either the 5 GHz band or the 2.4 GHz band for the Express to extend.
How the microwave oven will affect this is not known. This will one of those things that you have to try in your home to know if it will work well, so it might be a good idea to understand the store's return policy before you buy....in case things do not work out as hoped.

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

AirPlay Compatible with older generation AirPort Express?

Hi everyone,
We are building a new flat and I am planning on installing ceiling speakers into each of the rooms. I will have the speakers connected into Airport Express units so that I can stream audio to different rooms.
Question, the older generation (2004/2005, M9470LL/A) model Airport Express was compatible with AirTunes. Is it also compatible with streaming audio through AirPlay? Or does this ONLY work with the new AirPort Express (802.11n model)?
I am running a 802.11g (and ethernet) network currently so don't require the new 802.11n function of the new AirPort Express, would prefer to go with the cheaper option and buy the older generation if it is compatible with AirPlay.
Thanks!

AirPlay requires that the AirPort Express Base Station run 7.4.2 or later firmware. In turn, this version of firmware can only run on the 802.11n base stations ... so, the older 802.11g Express will not fully support AirPlay.

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

Hello, I have Iphone 5 with Itunes music, airport express, 2 stereo speakers. What else do I need to hear music on the speakers?

Hello, I have Iphone 5 with Itunes music, airport express, 2 stereo speakers. What else do I need to hear music on the speakers?

Hello ricsch,
It sounds like you want to setup your Airport Express to Airplay music from your iPhone 5. I found an article with steps to help you get this setup:
Connecting to an existing Wi-Fi network, exclusively for iTunes music
AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
How to Set It Up
Connect your AirPort Express to your home stereo or powered speakers.
From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
http://support.apple.com/kb/ht4587
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I used part of my name in my home network. Now I understand this was stupid security error. How can i change the name of my home wifi network, airport express? Thanks.

I used part of my name in my home network. Now I understand this was stupid security error. How can i change the name of my home wifi network, airport express? Thanks.

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Edit the Wireless Network Name
Keep it short.....maximum 10-12 characters or so. No blank spaces or punctuation marks in the name
Click Update at the lower right of the window to save the new setting and wait a full minute for the AirPort to restart

Hotel WiFi and Airport Express to use printer wirelessly

Hi, Last year I stayed in this hotel which had Ethernet internet access in every room. I had no problem setting up two Airport Express to access the internet, my printer and play music from iTunes. This summer the hotel now has wireless access and I can't get this all to work. Any help will be appreciated.
Jean

You will need to configure your Airport Express to join the existing wireless network (client mode), however this will only work if you don't need to login or authenticate via a browser or similar.
Then you will need to configure your Mac to join the wireless network as well.
You will then be able to print and use AirTunes (as will everyone else on the wireless network).
iFelix

Cannot print or scan with USB printer over wifi from airport express / time capsule wifi

Hi everybody,
I have recently set up time capsule connected to the router from the telephone company but created a new wifi network for the time machine to better work. Now I have bought an airport express to be able to use my USB printer over the WIFI network. I have to laptops, the printing works fine over the mac book air but not over the macbook pro. On top of that I cannot scan with either of the devices.
I have scanned most of the information out there but this issue seems not to be addressed properly anywhere. Advices given do always repeat itself but no solution worked for me.
Now I have plugged the usb from the printer directly back into mac book pro and the problem seems to persist here too. The message I receive everywhere is this one:
The software for the printer was installed incorrectly.
Would you like it to be repaired?
When I hit the Repair button a notice says 'repairing permissions' but nothing really happens. In the end nothing has been printed.
Resetting the printing systems has not really changed anything either. The problems persist.
This is the screen I get when the printer is directly plugged in through USB:
Result: printer recognised and installed, I cannot print (The software for the printer was installed incorrectly), but I can scan (probably because of the hint ('multifunction')
When I try to install the printer through the network connection (wifi network over time capsule and airport express) I get this image:
Result: printer recognised over bonjour but without multifunction (in other words without scanning), I cannot scan nor print (The software for the printer was installed incorrectly)
As I already mentioned any solution I found online would not work. Now the qustions are:
1) why can't I print? The drivers seem to be there but somehow broken, and I don't know how to repair it
2) why can't I scan over wifi? It sould possible that any function that can be performed over cable should also be able to performable over air, right?
I would very much appreciate any kind of help.
Thank you in advance,
Cris

What's up doc?
HP has not provided "network" drivers to allow advanced features when the the All-in-One is connected to the USB port on the Time Capsule.
Therefore, only the printing function is supported when the All-in-One is connected to the Time Capsule's USB port.
If you need advanced features like fax, copy, scan, maintenance etc., you will need to connect over the WiFI network, or connect the All-in-One directly to your computer.

Best configuration to extend wifi with Time Capsule & Airport Express

In my house I have a Fritzbox wifi router on the ground floor as my primary internet access. I have an ethernet cable going to the 3rd floor study where the Fritzbox signal is relatively weak. I purchased a Time Capsule as a backup device, but also wanted to extend the Fritzbox wifi network by plugging the ethernet cable in to the TC. I was not successful in extending the network, so I had to create a new network. When moving from downstairs to upstairs, my iphone keeps the connection to the (now weak) wifi network and I have to manually change to the (stronger) TC wifi network.
Additionally, I used to be able to successfully extend the downstairs wifi using my Airport Express (and also managed to have my speakers plugged into this for wireless usage), but do not want to additionally complicate my set-up.
So, what is the best way to connect the following equipment, ideally with the same network name, to ensure I always use the strongrst signal automatically:
Third floor:          iMac,    Macbook,   Time Capsule, Airport Express
          Ethernet cable from ground floor to 3rd floor
Ground floor:     Fritzbox wifi connected to internet

You must configure the Bridge Mode setting as the very last step before you Update the settings, otherwise the setting will change automatically.
In other words, you can change the setting to Bridge Mode, but if you make any other changes before you click Update, the Bridge Mode setting will not take effect.
Or, if you see any error messages about DHCP conflicts or Double NAT....the AirPort is not in Bridge Mode...even though you might think it is. Check the settings again.
will I still be able to set up an additional 5GHz network in parallel?
Yes

Problems with wifi with AirPort Express

Similar Messages

Maybe you are looking for