Probook 470 windows 8.1 upgrade to windows 10, any driver compatible issue?

Hi,
First I assume there is a bluetooth module inside your computer.
If so please test to reinstall its driver. To get a driver for the device, you need to know the brand and model of your computer or your motherboard.
Generally computer manufacturers will provide all drivers for their computers on their website. Search with your computer model on manufacturer's website could help you get a proper driver. If failed, search your motherboard from its manufacturer instead
will also help.
After that, uninstall your bluetooth module from Device Manager and install the driver you just downloaded, reboot to see the result.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Moving LR2 from Windows to Mac; drive formatting issue...

Over the past year I have gradually switched from Windows OS to Mac OS and Lightroom is one of the last to migrate.
I have a 22+K image library (both images and movies) with a deep directory structure accumulated over many years, currently on a Windows NTFS formated drive. I moved the LR catalog to the Mac without problems and it now has no problem "seeing" the images on the Windows drive, HOWEVR, since this is a NTFS formatted drive I can only read and not write to the drive and thus I need to move the library to either a FAT32 Windows drive or (better) to a native Mac OS drive.
The problem I am running into is that if I move/copy the images outside of LR, the software cannot "see" the images on the new Mac OS formatted drive. Moving the library from within LR does not work because when LR tries to erase the images from the Widows drive it returns an error and stops the process. Exporting the image catalog seems to export the images and not the movies that are scattered through the folders and thus creates a file managing headache. I have read extensively through tutorials, support pages and discussion forums and cannot find a discussion of my specific problem. Am I missing something? Any suggestions?

Thank you for both suggestions! I am not quite sure what to make of this... I had tried what Jao vdL suggested before and it didn't work. Upon trying to find the files on the Mac-formated drive I usually get the message:"Lightroom has encountered problems reading this photo. You will not be able to make adjustments to the photo" At the time my understanding was that the problem arises from the different ways that both formats handle individual files.
Just in case, I tried the whole process again last night and got the same error message but then I left the computer running overnight and this morning everything seems to be fine. As far as I can tell the library and catalog are intact and LR is behaving normallly. Strange! Regardless what the reasons behind all this are, it worked so... thank you!

Officejet H 470 windows 8.1 driver fails to install

I downloaded the full feature software driver for windows 8.1 for my officejet H 470.
When I run the downloaded exe file the software "cannot find the file" and closes out. it doesn't ask for a CD. It is looking in a temporary file on my harddrive. If I close the message the software closes down and the driver doesn' install. if I ignore the box nothing happens -- the software continues to look for the missing file for ever....
What is the solution?

Cheetah12: thank you for your interest in my problem.
I went back to the supermario advice. If isn't for the same printer nor the same missing file. My missing file is:
File Name: C:\Windows\system3hpzprl40.exe -inf-mPreload_Drivers\Msiexec.exe
However, I did try some of the advice. I ran the L3uninstall.bat [twice]. I definitely do not have any of the old printer files on my new laptop.
I tried to reinstall the updated driver from the HP website and it still will not install.
I have also run the disk cleanup in "administrative tools" [Supermario wrote in "System tools"]
Nothing has worked. I have rebooted my laptop as required and tried installing the driver from HP and I still get the same issue . I have a screen shot of the box if it is of interest to you.

HP ProBook 4530s Windows XP Graphics Driver issue

Hey
I just got a few of these 4530s and installed XP on them however the graphics driver won't take. I keep getting the error "This computer does not meet the minimum requirements."
It has Service Pack 3 and is Windows XP Pro which is the only requirements I could find for the driver. Does anyone have any ideas why it won't install the graphics driver?
This is the driver I found on HP for the graphics. Graphics Driver
I have even googled and can't find any other ideas or situations where this occurs.
Any ideas would be very much appreciated. Thanks!
This question was solved.
View Solution.

Please give us the hardware ID from device manager for the video chip. Any chance the units you have use the discrete AMD graphics instead of the integrated Intel HD 3000? That would explain why the Intel driver doesn't work.
You can also go to intel.com and download their generic video driver for the HD graphics for 32 bit XP:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20611&ProdId=3231&lang=eng
This covers both the i series core version of the intel video and the Celeron version; again not sure what you have.

TA24326 Windows 8 any driver updates I can't load CDs

any thoughts on how I can upgrade bootcamp to match the windows 8 system from XP?

Apple is not here.
This is a user to user forum.
apple.com/feedback can be used to reach Apple
Allan

Windows 8.1 Drive letter issue

Hello All,
I have a Windows 8.1 TS and it contains format and partition step to partition it to 2 drives. When I create USB media of this image and deploy it, it detects OS partition as C:, the other drive in HDD as E: and USB as D:. But I want the other drive in HDD
to be identified as D:. Is there anyone facing this issue? do we have a solution for this?
Arun

Create the partition later in the TS using a script after you have removed the USB drive or have the script itself change the drive letters while the USB drive is still inserted. diskpart will do all of this for you.
Generally speaking though, having two partitions on a workstation is useless and causes all sorts of one off challenges like this. Your better course of action here would be to simply create a single partition and not waste time with the second.
Jason | http://blog.configmgrftw.com | @jasonsandys

Upgraded MAc pro to Lion now I no longer can open window office. any ideas?

upgraded Mac Pro to Lion, now no longer can use windows office. any ideas?

You need MS Office 2011 if you've installed Lion. Previous versions of Office don't work with Lion.

Cannot locate Admin user HP PROBOOK 4720, Windows XP

I was logged in as admin, created a new user account and switched user. That user finished and shut down computer, now I cannot locate my admin setting with all of my documents, pictures, setting, etc. How can I switch back to admin? I do not have that option when I try to switch users, now it just shows me the new user account that I created and when I power up goes straight to that account.
HP Probook 4720
Windows XP
Help! Thanks!

Hello CAH75. I understand you're unable to log into your normal account on Windows XP.
Do any of the user accounts which you can access have Administrator privileges? If so, you can try the following.
Log into the account.
Navigate to the Control Panel and locate "User Accounts." Select this.
You should see "change the way that users log on and off"
Uncheck the "use the Welcome screen" box.
Save your changes and reboot the computer.
This will bypass the Welcome screen and take you to a normal username and password login prompt. This should allow you to access the Administrator account. Let me know if this helps!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

How do I get Vista to go back to the Windows' Vista generic driver after an Extigy upgrade fiasco

Hello all. First, I'm glad to have the opportunity to be a part of this group. I didn't know it even existed, but here I am...so, let me know what you think.
I am a new Windows Vista Ultimate OS owner, and thus far, I'm absolutely thrilled with the advances in video render and compression speeds. However, one of the auto-update features tried to update my Extigy driver, the one that apparently loaded with the original install of Windows Vista, and the update didn't work...go figure. So, now there is no way to use the system restore as it doesn't recognize that there was a change, and I can't get the Extigy to make a peep.
How do I go bakc to the Windows Vista generic driver so I can listem to my voice overs agan?Thanks so much folks... Michael

Go to the device manager, and select the extigy, then properties, then in the driver tab, the 3rd button down

HP ProBook 470 G2 switching video IntelGraphics with AMD Radeon R5 M255

Notebook HP ProBook 470 G2 - OS Windows 8.1 Pro
Although the device manager appears R5 M255 AMD Radeon video card, display adapter option only appears in Intel Graphics. Mention that was installed on the HP website driver AMD Hybrid Graphics Video Driver Version 133521004140406A170611C.A
Also, other drivers were installed on the HP website.
Please help me.
Menasel

The answer was quite simple yet most people had dumb answers at best.
The system needs both drivers for Intel and AMD chipset.I will dispaly only Intel as Display Adapter but on heavy graphics use it will auto swich to AMD.You cannot choose what or when will work but tha how it works.

Hp probook 470

i want to buy a hp probook 470 but i donnot know the price of this product in saudi arabia.and there is no any retailer except one in riyad...2ndly no email contact is available here.and number which show on side is dead or offline...
kindly anyone help me..what is the price of hp probook 470 with 8gb ram in saudi arab

Your best option is to to a Google or Bing search with HP Probook 470 as the keywords.
That should return all of the local sellers with an online presence. Don't forget that this is not a sales, marketing or advertising branch of HP. This is the online global forum where peers support peers with answers and solutions for their products
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Probook 470 G0 webcam issue

Hello,
I have a ProBook 470 G0 with Windows 8.1 and my problem right now is that the system does not recognize my webcam. I cannot see the hardware on BIOS or in Windows device manager and when i try to install the drivers, it says that no such hardware found.
Below the installation log.
2014/06/29 18:32:34.343|00000944|Information|WinMain|Command Line:hpqRun.exe
2014/06/29 18:32:34.348|00000944|Information|FindMappingFile|Found C:\SWSetup\SP64824\MAP.INI file
2014/06/29 18:32:34.356|00000944|Information|FindSectionName|Found [USB_ID] section in INI file
2014/06/29 18:32:34.359|00000944|Information|FindKeyID|Found SECTION: [USB_ID]
2014/06/29 18:32:34.377|00000944|Information|FindSectionAndKeyStrings|Failed to find key ID: error code = 1011
2014/06/29 18:32:34.380|00000944|Information|WinMain|Completed, Return Code: 1011
Any ideas?
This question was solved.
View Solution.

Hi nicolaidesnicos,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since your Probook is a commercial product. You can do this at Commercial/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ProBook 470 G0 Notebook PC
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Jabber for Windows 9.2 deskphone control issue

Hi experts,
I'm having a problem with the newly installed Jabber for Windows 9.2.0. When I click on the bottom right "control phone" and select my Cisco 7941 it fails. I tried restarting the Cisco CTIManager service with no luck.
Deployment:
IM&Presence: cloud (Webex service)
CUCM version: 8.6(2a)
LDAP integration: full (with authentication)
Deskphone control was working prior the upgrade of Jabber for Windows. Everything else remained the same version.
Using Jabber softphone as a client still works fine.
CUCM ENd User is correctly configured.
Wireshark trace of my Jabber for Windows 9.2 client communicating with CUCM when attempting to control my deskphone shows the following:
Username: filippo.zangheri
Password: checked three times (it is correct because Jabber softphone works fine).
Any hint?
Thanks.
Filippo

Davide,
I know i am kind of late to the party on this one but i have fixed my issue and wanted to give you the information to see if this will work for you. If this is even still an issue?
I too had the same issue and just like you i confirmed everything was correct however I discovered something when I was looking into my End User profile on the CUCM. I had originally swapped my 7971 phone with a new 8945 phone and I had both phones associated with my line for a while before I removed the old 7971.
My End User profile still had both phones associated with my number even though the 7971 phone had been removed from my line. This was not allowing the CTI to connect to my 8945 phone or allow my jabber client to "Control Phone" properly because it couldn't figure out which phone to control. I went into the CUCM and physically deleted the 7971 phone from the system which released the associated phone in my End User profile. Once I did that, I "Control Phone" in my Jabber client and voila it worked like a charm!
To make sure I didn't have any Jabber client issues after doing this i signed out of my Jabber client and deleted the local system profile for the Jabber client and then signed back into Jabber and let it recreate the profile. Once that was done i have not had any issues with my Jabber client controlling my phone and all functions work perfectly.
Hope this helps...

RDP to Windows 8 or 8.1 issues - admin or console connection not working

Hi,
I have a number of issues when connecting to my Win8 Pro (and now Win8.1 Pro) machine via RDP. First off, I know that most of the issues I am about to list below should technically be resolved if I connect to the console or admin session of my machine, however
they don't.
The issues I am having are:
1. If the user is already logged in, when I connect I get a black screen for a few minutes before I can actually see the desktop, etc
2. If there is no user logged in already, then when I connect I get a black screen and then never actually see the desktop, therefore I have to reboot the machine, physically log into the machine and then I am able to RDP successfully.
Note: I have done some research on issues # 1 & 2 and I think this is because of my Nvidia drivers - as I have a Nvidia GTX660 Ti installed.
Although issues #1 and #2 are annoying, they are nothing like the issue I am experiencing below:
3. Once I am logged in and can access and use the machine, no matter if I am connected to the console session of the machine or not, I can't run most applications. For example if I start Command Prompt, or try and access any Control Panel item, or System
Properties, etc I get the following error:
"The application was unable to start correctly (0xc0000142). Click OK to close the application."
4. In addition, I can't do any kind of administrative function on the machine I am RDP'ing. I can't install software, I can't access any form of system setting, I can't power on VMs in VMware Workstation, etc.
The user I am logging in as is a local administrator and I am connecting to (or at least I am trying to) connect to the console session of the machine. I have tried this from the following different setups:
1. Another Windows 8.1 Pro running mstsc /admin and just normal mstsc
2. From my Mac using Microsoft Remote Desktop app and ensuring I select the "Connect to Console session" option
TROUBLESHOOTING:
================
In order to attempt to resolve this problem, I have done the following troubleshooting:
1. From the problematic Win8.1 Pro machine, I have RDP'd (via mstsc /admin) to my other Win 8.1 Pro machine. I have tested running cmd, installing apps, etc, etc and I have been able to do everything just as I should. To me this means that there is some
sort of configuration issue between the two machines.
2. Based on the information from #1 above, I have compared the following settings between the two machines and have set them to be exactly the same:
- User Accounts - same settings (local admin, etc) + UAC disabled
- Windows Firewall - both on and set to default settings
- Local Groups have the same members - Local Administrators, Remote Desktop Users, etc
- Remote Desktop enabled and set to least restrictive option (less secure option)
- Local Security Policy - Checked Local Security Settings to ensure all settings are exactly the same
- Local Group Policy - in particular for Remote Desktop settings - both exactly the same configuration
- No additional 3rd party apps are installed on either machine which I think could cause these issues (other than Nvidia Graphics Card drivers on my problematic machine)
3. Done extensive internet research and can't seem to find any information or people having the same issue as myself
4. Clean install of Windows 8 Pro and tested - same issue. Installed all latest drivers, Windows Updates, etc c- same issue. Upgraded to Windows 8.1 Pro - same issue.
5. Created a new local administrator user and tested - same issue
6. Checked event viewer and can't seem to find any specific error that would give insight into what is causing this issue
At this point, I have come to a dead-end as I am not sure what else I can try to resolve this issue. If issues #1 and #2 can't be resolved, then I am happy to "live" with them, however the rest of the issues are really frustrating as they are preventing
me from easily achieving what I need to.
If anyone can point me in the right direction or has some insight into these issues, it would be greatly appreciated.
Thanks very much
Regards,
Luca

Hi Roger,
Thanks for the reply. I should have mentioned that test result before, sorry I forgot. If I log into the problem machine locally with the same user I am logging into when logging in via RDP, I can run cmd, I can install apps, I can do everything as I should
be able to as I am a local admin and have disabled UAC.
If however I log in with the same user via RDP (whether or not I have already logged into that machine locally with the user or not), I have the problem of no admin access. This is why I think it is a problem accessing the console or admin session of the
machine.
Sorry, but I am not sure by what you mean by this question "If so, how about change other computer to
remote to this problematic Win8.1 Pro machine?"
Thanks for your help
Regards,
Luca

Windows 8.1 driver for hp pavilion dv61215ee

dears .
i'd like to change my operating system to windows 8.1 but i'don't find any driver support my notebook hp pavilion dv6 1215ee pls help me to solve this problem .
thanks in advance
maha

Hello @MahaEzzeldin
Welcome to the HP Forums, So I see that your are interested in updating your system to windows 8.1 and are looking for drivers.
Just to confirm you system is the hp pavilion dv6 1215ee. Here is the link that provides the supported HP Software and Drivers. Just click on the link below.
HP Pavilion dv6 1215ee Software And Drivers.
As you will see it shows support for the following Operating systems. Windows Vista 32 bit and 64 bit. as well as Windows 7 32 bit and 64 bit. There is another link that will direct you to other possible Operating systems as well.
What if I Don't See My Operating System?
That all being said. One thing you will want to consider is if your notebook will be able to function well with windows 8.1.
Here is a link to use so that you can check and see if your notebook will run windows 8.1.
Windows 8.1 Upgrade Assist.
I hope this information is helpful and please feel free to come back any time even if you are just letting us know how things went.
Thanks,
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Probook 470 windows 8.1 upgrade to windows 10, any driver compatible issue?

Similar Messages

Maybe you are looking for