Proces chain problem in production

Hello friends,
i have faced the process chain problem in the production as "Status change of process ZD_BDIT_ACTIVATE" save status and trigge event if appropiate ? . and displayed message is " ABAP/4 Processor :DBIF_DSQL2_DEFAULT_CR_ERROR" . i want help to solved this problem and what exactly the problem is?
actually this problem came to activation and its indicated red but when i went to data target and then i show that activation is not started or not trigger. please give me what is exactly problem and what is the proper solution.
please reply me as soon as possible.

Quick Checks:
1. Check the status of User in R/3 which you have used in the RFC destination i.e SM59 and IDOC Adapter ? if it is locked , then unlock it. If password is the problem, then try to change the password.
Don't reset it ...
2. Also check out the status in XI, SM59... what is the user used ? is it correct etc... by testing the connection
3. I think the IDOC Metadata is having problem.. Go to IDX2 and reimport the metadata in XI.
Also note that, it is prefer to use Service User in SM59, and IDOC adapter instead of dialog use in the Production environment. so that no problem of locking etc
Hope this helps`
Rgds Moorthy

Similar Messages

OS command in proces chain

Hi,
has anybody experience with runnig unix command from proces chain?
I tried to do this, but nothing hapened.
Where should be a problem?
Thanks
RH

Hi,
Go through this
Including an OS Command as a Process in a Process Chain:
http://help.sap.com/saphelp_nw04/helpdata/en/b8/ec745009de3c418dc3f61dd44257d0/content.htm
Regards-
Siddhu

Problem in Product Update

Hi All,
I am facing a problem in product updation.I am using maintain FM to update Product in sap crm 2007. after that I am using COM_PRODUCT_SAVE_API.This API takes a lot of time to update only one set type .When I debug this API ,there is a badi FM (COM_PR_CHBADI_CHANGE_AFTER_UPD )which is used in this API is taking time.I tried to remove this badi by creating Z API to save Product but Product is not updated with new values.Please tell me any solution for the same..
Regards,
Hem

Hi Hem,
I faced this issue with CRM 5.0 couple of years back. We didn't get any solution at that time other than to update the set type tables with direct table updates.
I thought in higher versions this issue would have been resolved, but i guess not. If you find any solution, please do share.
Regards,
Shyamak

Facing an problem in production server cluster

Dear All,
I am facing an problem in production server, we are using Ecc5, windows 2003 with Oracle 9i and with the is clustering node A and node B
The problem is suddenly the sap sever get restated and the resources get move from one node to another e.g. .node A to node B but not all the resources move to one node , except the kernel drive where sap is installed it is in different node and rest in other node. At present time both the node are active.
How to move the all the resources into one node I have tried before also but my experience in not good
One time I have to recover the database and another time I have hard time to start service of sap R/3.
This time I have the same problem please suggest me how to do it in correct way and to solve this problem.
Regards,
Shiva

Hi,
This is related to virus problem. Pls check virus with latesh dat.
Anil

Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

Hi All,
I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
Zone" when we "Connected" our site to the product catalog. Issues experienced:
1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
configured correctly. The catalog would connect despite the error, and the navigation worked fine.
2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
http://InternalURL resulted in results being returned as expected.
After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
Ok, so now onto our current problem:
The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
the following scenario:
1) We click a category in our Product Catalog, such as Electronics
2) A list of our electronic devices are presented via the "Category" display page
3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
Internal (when browsing via Default zone):
http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
External (when browsing via Internet zone):
http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
displays the same (wrong) result externally.
This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
Any help/ideas?
Our environment:
SharePoint Version: 15.0.4667.1000
Default Zone: http://InternalURL
Internet Zone: http://ExternalURL.domain.com
We are NOT using host named site collections
We ARE crawling the Default zone URL in our content source
Thanks,
Tommy

Hi,
We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
More info:
http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
Thanks,
Tommy

Problem in Production as Login Credentials changed

Hi,
This is a scenario from IDOC to JDBC.
This is a case arised due to blocking of the id, which we were previously using in XI for getting connected from R/3 systems, ie the RFC destinations from R/3 to XI were using that login credentials.
So the scenarios failed.
Again we reset the ID with the same password. But the scenario is failing.
The idocs are reaching to XI , but the the pipeline steps are not executed. It is saying " INBOUND INTERFACE NOT FOUND"
This is a problem in Production, and we ve not touched any interface or mapping.Previously the scenario was working fine.
Pls give me the solution and we 'll give 500 points:-)
Regards,
Navneet

Quick Checks:
1. Check the status of User in R/3 which you have used in the RFC destination i.e SM59 and IDOC Adapter ? if it is locked , then unlock it. If password is the problem, then try to change the password.
Don't reset it ...
2. Also check out the status in XI, SM59... what is the user used ? is it correct etc... by testing the connection
3. I think the IDOC Metadata is having problem.. Go to IDX2 and reimport the metadata in XI.
Also note that, it is prefer to use Service User in SM59, and IDOC adapter instead of dialog use in the Production environment. so that no problem of locking etc
Hope this helps`
Rgds Moorthy

Process chains problems : Working every day with error (red)

Hi All,
I have a next question, about process chains problem.
When I start my process chains immediate, then working without errors, but I want this process chains work every day and chainged properties, selected date/time and periodicaly (every day) but now it work with error.
How to I find problems? What are yours offers?
p.s. I see logs, but every day have diffence between errors.
Regards,
Mahir M. Quluzade

HI,
just check the time which you have given is OK or is overlappintg with some other job which is locking your table in process chain
or is colliding with attribute change run
or it fails because of lack of background processes.
There could be numerious reasons and you need to analyze the log for this.
But as you said the job is failing everday for different reasons..try to find the most common errors and try to remove it or mention that here.
Thanks
Ajeet

Servlet chaining problem..

import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class Deblink extends HttpServlet {
      public void doGet(HttpServletRequest req, HttpServletResponse res)
                                   throws ServletException, IOException {
        String contentType = req.getContentType(); // get the incoming type
        if (contentType == null) return; // nothing incoming, nothing to do
        res.setContentType(contentType); // set outgoing type to be incoming type
        PrintWriter out = res.getWriter();
        BufferedReader in = req.getReader();
        String line = null;
        while ((line = in.readLine()) != null) {
          line = replace(line, "<BLINK>", "");
          line = replace(line, "</BLINK>", "");
          out.println(line);
      public void doPost(HttpServletRequest req, HttpServletResponse res)
                                    throws ServletException, IOException {
        doGet(req, res);
      private String replace(String line, String oldString, String newString) {
        int index = 0;
        while ((index = line.indexOf(oldString, index)) >= 0) {
          // Replace the old string with the new string (inefficiently)
          line = line.substring(0, index) +
                 newString +
                 line.substring(index + oldString.length());
          index += newString.length();
        return line;
What is pre request fo above code to work.
I had tried this many time but it is not working, what will be calling servlet look like

And can you explain why your title is "Servlet chaining problem"?

Delta INIT problems in production system

hi!
How do you do, I hope all fine, well, I have a problem in production system, I execute the delta init and the data is in BW the problem is when I want to activate the data, the system give me a processing error, somebody can helpme please?
BR

Hi
Please check with your Basis team to confirm there are enough resources.
Also Check what is max work process time . Tcode RZ11 parameter rdisp/max_wprun_time
Check this thread which mentions a lot of related notes.
Link: [Re: DSO-data activation issue;
Regards
Sanjyot

Using COMPRESSION any Problem in Production ?

Hi All,
we are woking in SD application in BI7.0.
We plan to use the compression in SD application area for the Sales Cube (VBAK and VBAP), Delivery Cube(LIKP and LIPS ),Billing Cube (VBRK and VBRP ) and Shipping Cube ( VTTK and VTTS).
The infoproviders are used in the infoset.The below mentioned scenario occurs in the data loads of the infoproviders because of which decided to use the COMPRESSION:-
Sales Cube                                                                   Delivery Cube
Sales Doc        Sales Qty                                                Delivery Doc         Del Qty        Sales Doc
1                        11                                                        1                            11            1
1                        -10
1                        10
InfoSet ( Before Compression)
Sales Doc        Delivery Doc            Sales Qty            Del Qty
1                        1                            11                        11
1                        1                            -10                       11
1                        1                            10                        11
The report developed on the will show Sales Qty = 11, but Delivery Qty = 33. Which is incorrect.
To avoid the above incorrect data planned to use the COMPRESSION so that the infoset will get the data as mentioned below
Infoset(After Compression):-
Sales Doc        Delivery Doc            Sales Qty            Del Qty
1                        1                            11                        11
The report developed on the compressed infoproviders will show Sales Qty = 11 and Delivery Qty = 11. Which is correct.
Please give your suggestions that using the COMPRESSION do create any problems in the Production or is there any other way ?
Thanks in advance.
LNV

Hi ,
Thankyou for the above reply but as a precaution like to know that what are the scenarios where the COMPRESSION of the infoprovider creates a problem in Production System?
Thanks in advance.
LNV

Proces chain decision with formula method: which proces chain is performing

I want to know which chain is processing while i am in a decision. I made a decision in a proces chain. From that decision i call a formula. In that formula i call a method which i defined myself (client specific fomula/method). Now i want to know from which proces chain this method has been called. I tried the following ABAP statements in this method:
IMPORT instance TO l_instance
log_id TO l_logid
chain_id TO l_chainid
FROM DATABASE rspc_buffer(ab)
ID i_chain.
I found this statements in another SDN thread and from experience i know it works fine when you process normal ABAP in your proces chain.
Unfortunately this does not work in a method from a decision. Maybe i need to access another table?
Any suggestions?

Ok, if you worry about that, let's do it in series...
you create a local chain per IP/DTP (with link "if succesfull")...so you will have 10 local chains
then create a big chain with these 10 local chain (with link "always")
so, if a IP (eg of loacl chain 1) fails the DTP will not be triggered, the local chain 1 will go to status red, but as you put between the local chain option "always", the local chain 2 will start...and so on
For inforamtion, I would put the attribute change run for the specific attribute in the local chain...this way you will only activate data of succesfull IP/DTP's...
this way you should achieve what you aim for...
M.

Can 119 phantom asslys at one bom level create problem in product costing

I am going through a scenario where there r 119 phantom assemlies at one bom level. Can this create problem in product costing? It has been told to me by somebody that there can not be more than 99 phantom asslys at one level of bom? Is that true? My problem is that when i am doing product costing it is showing error-" too many dummies at bom level". Is this related to no. of phantom asslys at one bom level?

HI bala,
all the materials are costing relevent. I thik this problem is releteted with no. of phantom assemlies allowed at one bom level.
I had 119 phantom assemlies at bom level 3 of a varient material. At that time it gives me abap runtime error during product costing.
Now I have removed special procurment key 50 from material master of 20 number of phantom asslys. so now there r now 99 phantom assemlies at bom level 3.
I have taken costing run and its not giving error.
so i reached to conclusion that statndard limit of no. of phantom assemlies at one bom level can not exeed 99.
Now customer requires 119 phantom assleys at this level 3 of bom.
So can u suggest me whether i should contact sap to increase this limit for this perticular case?
will they solve my problem or there is any other solution to this?
please reply.
nitin

If Process Chain Fail in Production?

Hi to all,
Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
Does we need to repair it, or repeat it or, restart it.
How to identify what should be done and how to do it.
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi
Based on the error occur in process chain step, we have to monitor the error.
If the error or red color occur when you schdule and check the log view, then right click the error process step and select display messages, check the error clearly by using process monitor.
based on the error you have to react.
this links will helpful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
Edited by: Srikanth.T on Jan 23, 2012 11:29 AM

Problem printing production order.

Hi guys
this is my first post. i have a problem printing production orders.when i give a print. its printing only 2 or 3 line.what should i do to add some more information to my production order.and where can i view the print preview of my production order.

Hi,
The production order can be printed in CO02 screen itself.(Ctrl+P). To define what to be printed, you need to identify/define the correct list in the transaction OPK8. Once the correct combination is selected for the required plant and order type, this can be printed in production order.
But for the preview after printing, you can view the spools created in SP01.
Or T code CO04N or CO04 is meant for printing production orders
Need to do the setting in OPK8
First check the configutaion link below and then come back.
http://help.sap.com/saphelp_40b/helpdata/en/3a/72369adc56d11195100060b03c6b76/frameset.htm
Regards,
R.Brahmankar

Process chain issue in production server

hAI
I created the process chain to load the transaction data . Then i transported to Quality and Production server.
1) When i try to open the my process chain in RSPC in Production System. Then im not getting the process chain . But im getting black just.
But when i press 'change' button in Production Server then it says that "changes are carried out in original system" and then im getting my process chain .
2) When i try to schedule my process chain in production server then it asking for new transport request . Why it is like that . Once i transport the process chain from development server to production server. Then it shouldn't ask for new request.
Pls help in these secarios. I need urgent help .
kumar

Hi Kumar,
I don't know what the problem is but you can copy in PRODUCTION environment the process chain to a new one.
Please follow the steps:
1. Open the problematic process chain (display or change mode).
2. In the command line write the word "copy" .
3. A popup will appear, insert a new name for the new process chain and confirm.
4. The new process chain is now opened but it is not active yet.
5. Delete the "old" START event and insert a new one.
6. Activate and schedule the chain.
While activating the new chain, no transport request should appear in PRODUCTION.
Hope it helps, Amir.

Proces chain problem in production

Similar Messages

Maybe you are looking for