Process chain - APAP-Program - Raise exception, messages and log

Hello,
I've got a process chain with a "ABAP program" process. How should I deal with an exceptions in the program? In a test, I created an exception. But I could not find it in the log of the process. How can I fill the log?
Thanks for your help!

Hi,
Write a simple information message, this will fill the log with message you are defining.
for example,
IF sy-subrc <> 0.
message i398(00) with 'entries'
 'not found'
 'in the'
 'table'.
ENDIF.
The message will filled in the log if this error condition occurs in the ABAP program.
Thanks.

Similar Messages

Request Error - The server encountered an error processing the request. The exception message is 'Unable to retrieve the requesting user's identity

I'm trying to create an Orchestrator Connector in Service manager, It is not going well.
The most resent alarm is
Request Error
The server encountered an error processing the request. The exception message is 'Unable to retrieve the requesting user's identity.'
For the Orchestrator Web Service URL: I have http://Server_Name:81/Orchestrator2012/Orchestrator.svc/
I created a new Run As account that uses Windows authentication, when I test the connection thats the alarm I get.
Paul Arbogast

Hi,
Can you access the URL using a browser? Does it work with the credentials used for the RunAs account?
Strange error message though - are the account you are running the console with, present in the SCSM CMDB?
Regards
//Anders
Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

I changed my apple id and everything works fine except message and face time. I cannot reactivate imessage and facetime shows my email to send and receive instead of my mobile number.

I changed my apple id and everything works fine except message and facetime. I cannot reactivate imessage and facetime is using my email instead of my mobile number. How do I reactivated message and use my mobile number on both applications?

I apologize. I misread your statement.
The information that I provided about adding the phone number back to the iPad is valid and should work. Now as for the activation of messages, take a look at these support articles for starters. Hopefully, something in one of these will help.
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages - Support - Apple

How the Payload Message and Logs are stored in the B1i Database Table: BZSTDOC

I would appreciate it if someone could provide any documentation regarding B1i database further maintenance.
for example:
I want to know how the payload message and logs are stored in the table BZSTDOC, and how can we retrieve the payload message directly from the column DOCDATA.
As described in the B1iSNGuide05 3.2 LogGarbageCollection:
to avoid the overload of the B1i Database, I set the Backup Buffer to 90 days : so this means Message Logs from the last 90 days will always be available, but is there some way we can save those old messages to a disk so that I can retrieve the payload message anytime?
in addition, let’s assume the worst, the B1iSN server or the B1i database damaged, Can we just simply restore the B1i database from a latest backup DB then it can work automatically after the B1iSN server is up and running again?
BR/Jim

Dear SAP,
Two weeks passed, I still haven't received any feedback from you guys.
Could you please have a look at my question?
How is this Question going? Is it Untouched/Solving/Reassigned ?

CONVT_NO_NUMBER Dump error in Process Chain Abap Program

Hi Experts,
The daily running process chain is failed at ABAP program with the error CONVT_NO_NUMBER.
The reason for the exception is:
The program attempted to interpret the value "40-799" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
I am not familiar with ABAP.
Please suggest me how to proceed..
Thanks
<BMP>

Hi,
In ST22
Short text
 Unable to interpret "40-799" as a number.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
 caught in
 procedure "FM_DIR_LIST" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 The program attempted to interpret the value "40-799" as a number, but
 since the value contravenes the rules for correct number formats,
 this was not possible.
I am trying post the code but SDN is not accepting more than 15000Char's
So can i get ur (mail) details
So that i can send u the exact code...
Thanks,
BMP

MRP exception messages and QI inspection lots

Hi all
Currently my QI inspection lots (that are awaiting a Usage Decision which can take weeks) appear in MD04 with "Cancel process" or "reschedule out" messages.
I don't understand this as the stock is on site so I cannot cancel. How can I stop these messages appearing so my planner only sees Cancel process messages for MRP elements that she can actually cancel like open POs etc?
Thanks.

Hi
The 'Cancel' can be set for all elements, e.g. inspecton lot, purchase order, purchase requisition, production order, process order, if the quantities of them are redundant because the stock and elements before them is enough to meet the requirement.
The exception message is just shown in the case above to suggest the users consider if they are really needed.
If theere were no enough stock and receipts which can meet the requirements before the QM lots the exception would not haapen for them.
Leon Shen.

MRP exception messages and SNP alerts

Hi,
During MRP run in R3 we used to get exception messages like Reschedule in and Reschedule out as per the planning situation.
Now we are using APO SNP heuristic for planning and we are expecting same kind of messages to be given by SNP planning run for same planning situation.
We try to configure some SNP standard alerts but we are unable to find Reschedule in and out kind of alerts in SDP alerts.
Here, we want to know how we can call MRP kind of messages in APO and where these exception messages are stored in APO system.
Whether SNP heuristic is able to throw R3 MRP kind of exception messages for various planning situations?
Please advise.
Regards.
Krish

Hi Krish,
In SDP alert profile this kind of alert is not availabe but it is availabe in PP/DS alerts but that can be called when you are using PPDS planning table.(PPT1 etc)
Please check in alert profile (AMON1 ) in PP/DS tab ->Requirement/Receipt Alerts,Order Alerts - Product-Independent,
http://help.sap.com/saphelp_scm41/helpdata/EN/bb/3c8337fa296e6ce10000009b38f8cf/frameset.htm
Order-related PP/DS alerts
Manish

Raising a Message and staying at the same screen

Hi,
i had searched SDN before posting this thread
I'm working on a Enhancement for CO12.
The issue is that after raising a message i have to stay at the same screen.
I raised the error message like below, but after this message the whole screen is getting plain.
MESSAGE 'Quantite confirmee ' TYPE 'E'
I change my message type as STATUS, this message is display but the transaction doing its work.
MESSAGE 'Quantite confirmee ' TYPE 'S'
Can you please tell me how to get rid of this issue?
Thanks
Always LEarner

Thanks Guys!!
I tested with all options provided by you people. When i write CALL SCREEN 1000 it is going to dump. I think its unable to identify
the screen.
When i tried to raise a error message like below, message is getting triggered but its not stopping here because the message is of type 'S'
MESSAGE 'Quantite confirmee incomplete' TYPE 'S' DISPLAY LIKE 'E'.
When i tried to raise a error message like below, message is getting triggered but its making the whole screen plain
MESSAGE 'Quantite confirmee incomplete' TYPE 'E' DISPLAY LIKE 'S'
If i'm using 'EXIT' after the message statement , its coming out of the include
And, I have read the documentation of CONFPP05.
The documentation says :-
In this customer enhancement it is strictly FORBIDDEN to send error
messages or other messages because otherwise there is the danger that
data will be inconsistent. SAP takes no responsibility for this !!!
So, is there any way to raise an error message and stay on the same screen??
Thanks & REgards
Always Learner!!

Transporting Process Chains from Production DOWN to QA and Dev

Hello,
We have a ton of Process Chains in Production. I am looking for the easiest and most efficient way to duplicate those in QA and DEV.
What steps do I take to Transport them DOWN to the other two environments? Are there any pros or cons to doing this, or is it easier in the long run to just re-create them in those environments? Like I said, we have a ton! Any help would be greatly appreciated.
Thanks in advance.

Hi
The best practice is to have every development done in Dev then transport to QA and then to P.
If you are not following this process for PC you should.
Also, every now and then QA should be refreshed (meaning, copy P to a new QA system and by doing so all the data and config (including PC) will be in the QA system).
I would recomend to recreate the PC in DEV and transport them thru the landscape. This way you have the correct process where every Development is starting on the DEV sys and moves to QA->P.
Edan

Provider Hosted App - Exception Handling and Logging

Hello,
I would like to use file system to log the exceptions (The IIS server in which the APP is configured) for Provider Hosted App - Could anyone share some blogs/links related to that?
Thanks in advance,

Well the first time, I asked the question, I think I
was not so clear. Please let me explain this in
detail. I am not architect, so correct me if I am
wrong.
I want to use log4J but definitely want to avoid using
them directly in our package, idea is to create
wrappers around all the external API, jar we are
using. At logging side I feel little comfortable.
But having little difficulty in thinking and designing
about Exception handling framework.
1. My aim is to create a general framework in 3 broad
categories (For Presentation tier, For Business tier,
for Data Access tier)
2. For each tier if you import those already created
framework classes, all developers should be just able
to use the methods of exception framework and use them
in catch block and throw them.
Example:- I would like to create a class called
MyProjectExceptionDecider, which will decide the type
of exception in Business Tier and then use my
MyProjectExceptionErrorParser, which reads the XML
document and gets a related message number and error
message.
This MyProjectExceptionErrorParser then passes the
right exception to MyProjectExceptionDisplayer which
will display the exception with right message and
message number.
And something more like this. I am not yet getting
complete picture.
3. So, if you have done something similar and if you
have the class diagram and sequence diagram for such
exception handling, I would be grateful if you are
willing to share with me.
Please let me know, if you have different ideas. I
request you all to participate and throw your ideas
and suggestions.
Srikanthgenerally, wheather or not you are using log4j or anything else, when designing exception handling mechnism, you need to decide on where or by whom an exception will be handled, and if the exception needs to be displyed, and how it is displayed.

I cannot find my messages and log icons-

I mistakenly hide two icons--where yoyr messages are and call log; where are they?

Hit the menu key while on the home screen and select "show all"
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Error message and set cursor field in subscreen

hey ,
i have a program with main screen 500 and many subscreens 501,502 and so own .
when i want to validate wrong input in a field and set message type 'E' in the PAI of the subscreen the program
raise the message and exit from the program .
if i try to put the message in the PBO of the subscreen it dosn't exit but after the message the program dosn't flow to
command SET CURSOR FIELD that i wrote after the message .
how can i solve this ?
is there somthing that i'm missing in the basic code flow of the program ?
( screen 500 PBO - PAI -> SUBSCREEN 50x PBO - PAI )
best regards
ASA

hello and thanks for the answer
let me clarify my problem :
i want to issue a message ( type e or i ) only if some fields are null and the user pressed on SAVE .
when i'm in the tab-strip and writing error message in :
PAI :
chain.
field XXX
field YYY
module issue_warning_message on chain-request.
endchain.
in module issue_warning_message : if XXX is initial --> message type E --> set cursor field XXX.
here i get the message and cursor is set.
when i try to post the message in without chain or any events :
module user_command_tab502 .
the message is issued and it exit the program if the type is e and if type message is I the cursor is not set .
please advice
ASA

ABAP Program in a Process Chain

Hi!
I create a program in ABAP/4. The program modify an attribute of a Z table I have previously created.
I want to add that program in a process chain of BW which load a cube. The problem is that when I am in in the process chain, the program I have created doesn´t appear in the available programs to select and associate to the process chain.
What I have to do to have the ABAP program available to select and associate to the process chain?
Thanks in advance.

Hello Nicolas, there are a few options you can try.
1. Instead of an ABAP program, would you think of incorporating your logic into a function module and then create a generic datasource in R/3 to extract the data from your Z table using the function module. There is a function module in R/3 called RSAX_BIW_GET_DATA_SIMPLE that you can copy and use as a template for your function module. Refer to the following blog:
<a href="/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module:///people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
You can also search this forum for RSAX_BIW_GET_DATA_SIMPLE for other ideas.
2. If you really want to use your ABAP program in R/3, then your best solution would be to create a job in R/3 that is triggered by an event. This job will have two steps in it.
Step 1: execute your ABAP program to fill your Z table
Step 2: execute program to notify process chain in BW that ABAP process is complete (sample source below)
In your process chain in BW, your ABAP process should be set up to be
Called From: (RFC destination of your R/3 system)
Scheduled Program: Event (event name in R/3)
You may get a help message about "Requirements for asynchronous processes". This is an informational message telling you that if you call an ABAP program from a remote system, there is no way for BW to monitor it, so you will have to execute a function module (RSPC_ABAP_FINISH) in the R/3 system to inform the process chain when the ABAP program finishes. You can create your own program in R/3 to use this function module:
*& Report Z_RSPC_END_PROCESS *
* Trigger end of an ABAP process in BW process chain.
REPORT z_rspc_end_process.
*"*"Lokale Schnittstelle: Detination BW
*" IMPORTING
*" VALUE(I_VARIANT) TYPE RSPC_VARIANT
*" EXCEPTIONS
*" ALREADY_FINISHED
PARAMETER: p_rfc LIKE rfcdes-rfcdest,
 p_var(30) TYPE c.
CALL FUNCTION 'RSPC_ABAP_FINISH'
 DESTINATION p_rfc
 EXPORTING
 I_VARIANT = p_var
 EXCEPTIONS
 ALREADY_FINISHED = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
This program in R/3 will inform your process chain in BW that the ABAP process is finished and BW will continue to next process in the process chain.
Note:
p_rfc would be the RFC destination of your BW system
p_var would be the name of the ABAP process in your process chain
Hope this helps.

Process chain Error: This AND process is not waiting for event RSPROCESS

Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.S

Hi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli.

Process chain program variant will not change from yellow...

Hello,
Problem:
I have a process chain that has two branches with 3 process chain variants on each leg in a parallel configuration. The process chain variants run different program variants. I am using variant object called "ABAP Program with Success/Failure " which can have a yellow, green, or red status and has status arrows that can be either red or green that connect to other process chain variants. The program executed with these variants is a customized BPS UPC_BUNDLE_EXECUTE program. When I run this PC the first variant on each leg usually hangs indefinitley on the yellow status. In the Backg tab log (double click PC variant in Log View) I can see the various SQL code that was ran. The last line of the log is an SQL-END:... Sometimes it will get past the first 2 varaints and hang on the next set of 2. Other times it will just hang on the last variant of one leg. It is very sporadic.
What I have observed and tried:
If I check my SM51 for the server the chain is running on I can see that the program in question is not running. If I run the same program through SE38 that runs via a PC variant it runs sucessfully in an appropriate amount of time. If I kill the process that has been running indefinitley through SM51 the process chain variant will go from a yellow status to a red as expected.
I changed they way I ran the programs from running in parallel in 2 legs to running all of them in one leg serially. That did not work. At least one program variant will hang on the yellow status.
I replaced all the variants using "ABAP Program with Success/Failure" to "ABAP Program" which has a red/green status but no red or green arrows, but black coming out of the variant forcing it to move down the chain on a sucess or failure. The process chain variants also hung in the yellow status using the "ABAP Program" variant.
I have tried starting the process chain using both "Direct Scheduling" with "Immediate" and "After Event." I have also kicked it off using "Start Using Meta Chain or API" so it was functioning as a sub process chain. Programs were still yellow in every case without changing to red or green.
I created new process chain variants for every single program/variant that I am using. Still no luck.
I have tried removing the chain from the schedule and re-activating and re-running and still no luck.
Thanks in advance,
Gary Martins

bump

Process chain - APAP-Program - Raise exception, messages and log

Similar Messages

Maybe you are looking for