Process chain failed with RSDMD199

Hi All,
While loading data through process chain, which includes master data and transactional data,
the job failed.
and the message is : RSDMD199
also when i checked in details tab in RSMO, i got meaasage like:
3510 data records in table /BIC/PZORD_NUM marked for deletion
also this job runs with 3 data packages, out of which 1st data package failed while updating in target.
But completed data package also has the same message like
3510 data records in table /BIC/PZORD_NUM marked for deletion
So can anybody explain me which type of error this is.......???
Thanks in advance,
Vishal

hi,
see  Note 788588 which addresses the RSDMD199 error.
So shortly summarizing the problem of RSDMD 199.This error occurs due
to following reasons:
1. Master Data tables or indexes are inconsistent at the database level.
2. Master Data is inconsistent for the characteristic (RSRV check)
3. Same characteristic value spread across different datapackages and
they are loaded in parallel.
4. Parallel loading of time-dependent attributes or texts.
5. Delta update of an ODS object into a characteristic
6. Simultaneous data load into the following objects :
    a. Navigational Attributes of the characteristic
    b. Compounding Objects of the characteristic.
    c. Characteristics that are references of this one.
    d. Trasaction Data - Into Info Cubes that contain this
       characteristics
    e. ODS request activations - When the chacteristic is part of the
    ODS object.
Some of the above points are described in detail in the note 668466.
Colin

Similar Messages

  • Attribute Change Run in Process Chain failed with SQL 942 error

    Hi,
    Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
    Any pointers would be of great help!!
    Thanks in advance,
    Bhagyarekha.

    Hi Bhagyarekha,
    The reason behind that error could be:
    An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
    Check this SAP Note:
    Note 684405 - Replacing the compounding and deleting navigation attr.
    Hope it helps.
    Veerendra.

  • Process chain failing with error 8 in BI 7.0

    Hi ,
    we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
    But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.

    Hi,
    user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
    bye
    Frank

  • Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

    Hi,
    process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
                                                                   Save Status and Trigger Events if Appropriate**

    Hi Neha,
    When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
    Save Status and Trigger Events if Appropriate**"
    I have come to know that there is one ABAP programe when we go to manage varient.
    ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

  • Using Alert Framework to send email notifications when Process Chain fails

    Hi Everyone,
    I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
    Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
    Thanks,
    Ken

    Interesting....I was actually hoping for different recipients for different process chains.
    E.g. for our
    CRM process chain - Support Team 1
    FI process chain - Support Team 2
    and so on and so on.
    I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
    However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
    Cheers,
    Ken

  • Process Chain Ended with Errors - cause unknown

    I have had several instances of process chains stopping for no apparent reason.  The stops occur between 2 master data infopackage loads.  The last step is green and the next is grey.  The PSA table has been updated successfully for the last step.  All IDocs are in green status in both systems.  The monitor for the last successful step does say "Ended with Errors" although no errors are evident.  The process chain starts back up via Repeat at the next (grey) step and continues successfully.  There were no system problems or connection interruptions that occurred during the time the process chains failed.  There were no changes in the remote user profile.
    This exact problem has occurred a half dozen times since our application of ECC Support Packs several months ago and had not occurred before.  The infopackages are different each time. Two different process chains have had this problem.  I have re-activated and re-scheduled the process chains without solving the problem.
    Thanks for any ideas on why this may be occurring or what I can do to prevent it.
    Patty Moffatt

    Hi Des,
    Here's my BW release info:
    SAP_ABA        640       0019 SAPKA64019     Cross-Application
    SAP_BASIS      640       0019 SAPKB64019     SAP Basis          
    PI_BASIS       2005_1_6400009 SAPKIPYJ69     Basis Plug-In
    ST-PI          2005_1_6400008 SAPKITLQH8     SAP Solution Tools Plug-
    SAP_BW         350       0019 SAPKW35019   SAP_BW                      
    ECC SPs 13-21 were applied before the BW problem started:
    SAP_BASIS      640       0021 SAPKB64021    
    SAP_ABA        640       0021 SAPKA64021    
    PI_BASIS       2005_1_6400012 SAPKIPYJ6C   
    ST-PI          2005_1_6400008 SAPKITLQH8    
    SAP_BW         350       0021 SAPKW35021   
    PI             2004_1_5000016 SAPKIPZI6G    
    The process chain step and the monitor load both are green.  The Details tab shows all the processing is green, but the Process Chain itself is red with "Errors Occurred.  There have been no runtime dumps.
    Patty

  • Attribute change run process type failed with short dump

    Hi all,
    In the process chain Attribute change run process type failed with short dump. I checked the locks in SM12 but there are no locks associated. I checked in the attribute change run screen through RSA1 -> infoobject list but there are no infoobjects there. I think the ACR was completed successfully, still the process type in the PC was in red colour. What to do and let me know what happened here.
    Thanks,
    Jack

    1. This kind of scenario is extremely rare but it happens sometimes. It might be the case that 2 attribute change runs are running at the same time.
    2. Same IO is being used in Differnet PC and getting activated.
    I think if this frequently occurs you need to check at the time of locking all running jobs and see whether anywhere else or simultaneously 2 ACR are running.
    Please do close the thread if that answers your questions. Please help us keep the forums clean and open useful information only.
    For more information search on help.sap.com and you will get lots of material.
    Regards.
    Den

  • Process chain Failed while triggering the job

    Hi All,
    Actually everyday delta request has been loading to the dataTarget of same data source through process chains thrice with different timings.
    Today Problem is only once delta request  has been loaded into data Target without error. It has not triggered furtherly (two more times)
    When i have checked in the processchain its showing delta has been failed.
    Generally in this scenario how i have to investigate for know the details of the problem? anybody can tell step by step?
    Regards,
    C.V.
    Message was edited by: P.C.V.

    Hi
    Right click on the failed process type and display messeges and go to the Process monitor push botton
    if will take u to the Monitor screen
    The best thing is go to the
    1) SM37 and select the job in R3 and see the job log
    2) RSMO and see the error messeges in the monitor for the request
    give here the error messeges so that it will better to everybdy to  help
    regards
    AK

  • Process chain failed during DTP

    operation generate could not be carried out for the request no ...
    My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
    operation generate could not be carried out for the request while DTP in process chain
    Please give me the solution

    hi,
    chk if the DTP performs load with info spoke.
    if so chk the source and destination defintion of the infospoke definition.
    Ramesh

  • Attempt to process file failed with Exception in XML Parser-format problem

    Hi all,
    Iam getting an unusual error in the J2EE stack in XI.
    And the message is:
    006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
    This means that error occured during content conversion of XML to the prescribed file format.
    Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
    Thanks in advance...
    karun

    Hi Bhavesh,
    Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
    The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
    2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
    2006-11-30 17:30:50 Success Start converting XML document content to plain text
    2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
    2006-11-30 17:31:07 Error Exception caught by adapter framework: null
    2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
    2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
    2006-11-30 17:31:07 Success The message status set to WAIT.
    2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
    2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
    2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

  • Sending mail to GROUP ID when a process chain fails.

    Hi All,
    Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
    I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
    Thanks in advance.
    BR,
    Kiron.

    hi,
    The Distribution List/Group_id is created in SO23 transaction.
    hope it is helpful to u
    thanks

  • Attempt to process file failed with java.lang.StringIndexOutOfBoundsExcep..

    Hello All,
       I am implementing file2file with file going from shared folder to FTPS server.
    I am using TLS and X.509 certificate in file receiver communication channel.
    when I implemented my scenario, this is the error its throwing :
    Success : Connect to FTP server "my ftp address", directory "/TEST/"
    Error : Attempt to process file failed with java.lang.StringIndexOutOfBoundsException: String index out of range: 3
    I know this error is caused when java expects the 3 character length string and if its getting more than that... Does any faced this kindaa problem before...Any help is greatly appreciated....Obviously even points....
    Thanks,
    Ravi

    There is no custom code at all? No mappings, no custom modules, no pre/post processing commands?
    Also, check if you get this error when sending to ftps server without certificate (or with another certificate). It may be an incompatibility issue with certificate.
    Did you import the .pfx (or .p12) file in KeyStorage Service?
    Regards,
    Henrique.

  • Attempt to process file failed with ClassCastException

    Hi
    I have checked in <b>http://host:por/MessageSystem</b> there i got the following error...
    <b>Attempt to process file failed with ClassCastException</b>
    Can any one please tell me how to resolve the problem
    Best Regards
    Ravi Shankar B

    Ravi,
    I dont think it is feasible. Eventhough you have two files with the same name do you have the data same? Practically it should not be. Let us know your complete requiremens. Also see this link for some help on file validations:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fxi%2fxi-design_configuration%2ffileValidationsinSAPXI-ACaseStudy.pdf
    ---Satish

  • Attempt to process file failed with java.io.IOException

    Hi,
    The scenario is from Idoc to flat file and messages are getting processed successfully in XI. but in receiver communication channel error is coming:
    Attempt to process file failed with java.io.IOException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.
    MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.: java.io.IOException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.

    Hi,
    If you are using FTP then,
    1. Make sure that the FTP sever does not have issues with Firewall or a Proxy server access.
    2. Also verify that the specified FTP user ID has the necessary WRITE or overwrite authorization?
    Regards,
    Sarvesh
    ***Reward points, if it helped you.

  • If Process Chain Fail in Production?

    Hi to all,
    Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
    Does we need to repair it, or repeat it or, restart it.
    How to identify what should be done and how to do it.
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Hi
      Based on the error occur in process chain step, we have to monitor the error.
    If the error or red color occur when you schdule and check the log view,  then right click the error process step and select display messages, check the error clearly by using process monitor.
      based on the error you have to react.
    this links will helpful to you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
    Edited by: Srikanth.T on Jan 23, 2012 11:29 AM

Maybe you are looking for