Dm package(process chain: /cpmb/load_infoprov_UI)

HI Friends,
i'm trying to load data from bw cube to bpc, using data manager package(based on process: /cpmb/load_infoprov_ui). Which allows user to selectively load data. With this DM package, succsfully loaded data for few combinations, but i failed later on upon using this. What i did, was for few combinations i changes filed list options like selecting all, or selecting few fields . Now i'm unable to successfully use this dm packge. Where as normal process chain based package working correctly(/cpmb/load_infoprovider). Do i need to select any mandatory fields in field list option while executing packge based on selections. Filed list means, i read text as " select attributes for which you want to get master data". Now this package not bringing any data to bpc.
Any observations on this pls.
thanks,
SELECTION=<Selections><Selection Type="Selection"><Attribute><ID>YSEMPOSIT</ID><Operator>3</Operator><LowValue>14140</LowValue><HighValue>14141</HighValue></Attribute></Selection><Selection Type="FieldList"><FieldID>YSEMPOSIT</FieldID></Sel
ection></Selections>
i select single field(ysemposit) in field list and given ysemposit range(14140-14141). above one is view package status screen.
For 2nd case,
SELECTION=<Selections><SelectionType="Selection"><Attribute><ID>YSEMPOSIT</ID><Operator>3</Operator><LowValue>14140</LowValue><HighValue>14141</HighValue></Attribute></Selection><Selection Type="FieldList"><FieldID>0CALMONTH</FieldID><Fiel
dID>0CFM_TR_CUR</FieldID><FieldID>0CHNGID</FieldID><FieldID>0CURRENCY</FieldID><FieldID>0CURTYPE</FieldID><FieldID>0DATAORIGIN</FieldID><FieldID>0FISCPER</FieldID><FieldID>0FISCPER3</FieldID><FieldID>0FISCVARNT</FieldID><FieldID>0FISCYEAR</
FieldID><FieldID>0OBJ_CURR</FieldID><FieldID>0PS_COARCUR</FieldID><FieldID>0RECORDTP</FieldID><FieldID>0REQUID</FieldID><FieldID>0VTYPE</FieldID><FieldID>YBUSLINE</FieldID><FieldID>YBUSPROD</FieldID><FieldID>YBUSPROD__YBRAND</FieldID><Field
ID>YBUSPROD__YPRODGROP</FieldID><FieldID>YBUSPROD__YSERVTYPE</FieldID><FieldID>YCCA_CAT</FieldID><FieldID>YCIRCLE</FieldID><FieldID>YCOMBCCOD</FieldID><FieldID>YCOMBCIR</FieldID><FieldID>YCOTELMNT</FieldID><FieldID>YCO_AREA</FieldID><FieldI
D>YCSTCENTR</FieldID><FieldID>YG_CWW001</FieldID><FieldID>YREGION</FieldID><FieldID>YSEMPOSIT</FieldID><FieldID>YTECHTYPE</FieldID><FieldID>YVERSION</FieldID><FieldID>Y_PCMODEL</FieldID></Selection></Selections>
i select choose all fields in field list and given ysemposit range(14140-14141).

Hi,
with the process chain you mentioned, just make sure al attributes are selected in the second tab of your selection screen. If an attribute is not selected, you cannot use it for your selection ... Also note that with this process chain the SELECTION statement in your transformaiton file will not work anymore ...
D

Similar Messages

Process chains in MS 7.0 version of BPC

Hello Gurus,
I am using Microsoft 7.0 version of BPC, but I dont see a way to call process chains. In NW version, I can just go to data manager and Add package - process chain would be one of the types under package type. But that is not the case with MS Version. Please advise. thanks.

Hi,
In the MS Version they are called Packages and are created using MS SSIS.
Please refer the below link for more details on how to Add and Modify packages.
http://help.sap.com/saphelp_bpc75/helpdata/en/69/8e801e544a4739933fc9163e9b116c/content.htm
Santosh

Process chains not delivered in BPC 7.5 NW SP4 Version

Hi Experts,
We have installed BPC 7.5 NW SP04 sandbox system and we found that
there are two process chains
(/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) not delivered with
BPC NW 7.5 NW versino which are used for BW Master data imports.
Please suggest.
thanks
Venkata

Hi,
To acitvate BI Business content follow as below:
Login into Backend system (BW) and run tcode SE38> Enter program name as UJS_ACTIVATE_CONTENT>Execute
Choose AppsetID uncheck all check boxes except Activate BI Business Content and Run (F8).
Hope it works..
regards,
Raju

How to run multiple packages in one process chain

Hi,
we want to run a script logic with badi, followed by a standard move function. The BADI will perform a check and generate an error. If no error occurs, the move can continue ...
We created our own process chain, which is in fact the combination of a script logic and a move. The data package has underlaying syntax.
Problem is that the data package does not trigger the process chain ... Nothing happens when running it. When checking the status, nothing gets in here ... We assigned the correct process chain and get message a postivie message when running the package... Is this not possible?
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Selecteer de gegevens waarvoor een omboeking dient te gebeuren","%CATEGORY_DIM%,%ENTITY_DIM%,PRODUCTIEHUIS,PRODUCTIEWIJZE,NET,KWADRANT")
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(ZBPC_RUN_LOGIC,TAB,%TAB%)
TASK(ZBPC_RUN_LOGIC,EQU,%EQU%)
TASK(ZBPC_RUN_LOGIC,SUSER,%USER%)
TASK(ZBPC_RUN_LOGIC,SAPPSET,%APPSET%)
TASK(ZBPC_RUN_LOGIC,SAPP,%APP%)
TASK(ZBPC_RUN_LOGIC,SELECTION,%SELECTION%)
TASK(ZBPC_RUN_LOGIC,LOGICFILENAME,STOCK.LGF)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,CLEARDATA,0)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,CLEARDATA,0)
TASK(/CPMB/CLEAR_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_CUBE,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CLEAR_CUBE,SELECTION,%SELECTION%)

Hi Sheldon,
we never have issues when we combine standard objects, like a cliear with a load inforprovider, or the master data integration you mentioned in your document. However, from the moment we combine a script logic with a standard package (like a move) it does not work .The data package contains the task needed for the script and for the move. the process chain is called up but always comes in error in the first step (BPC modify dynamically ) ... there is also no log when checking the view status ...
I can sent you some screenshots if you like ...
D

Process Chain and Info Package Transportation?

Hello All
Case 1
How to transport a Process chain and a Info Package Individually?(first time from DEV to QA)
Case 2
I have 9(IP1 to IP9)infopackages and 3(P1 to P3) Process chains and in each Process chain I have 3 Info packages like IP1,IP2,IP3 in P1 and so on.,
Now is it necessary to transport Infopackages and Process chains individually or is it enough to transport Process chains only(If v transport Process chains will the Infopackages will also transport)then how to assign a request to each one?
What I mean is,all Infopackages are in $TMP(Package),and Process chain is also $TMP,Now is it necessary to change the package for Infopackages as well as Process chain and Tranport only PC,Iam confused here,can anyone help me out?
Many thanks
balaji

Hi Balaji,
If you have created new infopackages then you have to transport them. It is not necssary to transport the info-packages if you have them in the process chain but have not changed them.
Also you cannot transport any BW object with $ tmp package. Assign a package and then transport the objects.
The best way to transport the process chain is from the RSPC screen. Click the transport button there and collect all the objects and transport them.
Bye
Dinesh

Info Package in Process Chain taking long time

Dear All,
Info Package in Process Chain having 0 records is taking 1 hr 5 mins to complete. Time out time is set to 10 mins.
Does any one of you know the reason why it is happening like this?
Regards.

When the info package status turns to green : final message is :
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Diagnosis
     The data request was a full update.
     o   In this case, the corresponding tab
             contain any data.
     o   System Response
             Info IDoc received with status
             Procedure
Check the data basis in the source system.
Analysis
========
No data available in the source system for this selection
No further action necessary
When the status was red, I checked BD87 and SM58 and there were no entries.
The corresponding job in sm37 took 869 seconds to complete. Below was the job Log.
Job started
DATASOURCE = 0CO_PC_02
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 1345319, Duration 00:00:00
IDoc: Start = 24.10.2011 18:29:54, End = 24.10.2011 18:29:54
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 1345330, Duration 00:00:00
IDoc: Start = 24.10.2011 18:44:18, End = 24.10.2011 18:44:18
Job finished.
PLease help.
Regards.

Create Package while transporting a process chain

I want to transport a process chain but while doing so it is asking for “package” name. I do not have authorization to tcode SE21 to create a Package. I checked with ABAPer and he also does not have access to SE21.
Is it mandatory to transport a process chain only via a “package”? Are there alternative methods available which you can suggest?

Thanks..
Yes, this is the first process chain we are transporting.
I tried maintaining the paramters in RSTPRFC with the below settings..
Client: BW client 001
Destination: TPBWMANDTRFC
User: ALEREMOTE
PWD: ************
I want to know whether the details of teh destination are correct. If so, are these settings need to be maintained in QA and Prod systems as well?
Thanks and Regards,
Srinivas

Error in process chain when running package (data manager)

Hello experts,
I try to run the following how to : "move date between applications using Data Manager ..."
Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
I can't get any usefull error messages.
If someone has an idea to have details about those errors, it will be appreciated.
Points will be awarded, thanks in advance.
Guillaume P.

Hello Experts,
I am also facing the same issue with PC failing at Modify_Dynamically step....
This process type is working fine when used in standard delivered process chain to load transaction data.
I tried using this variant in my cutsom chain, but it fails.
Please suggest.....
Thx....D

IP: Error in packaged planning sequence in process chain

Hi all,
We run a planning sequence from within a process chain. As the data transferred are quite a lot, we have packaged with setting "automatically" and with 30 packages to be built. Now the function returned (it ran already successfully before!) an error message stating:
Master cannot read return value from subprocess 2
and another error:
An error occurred with the maintenance of the query directory.
Do you have any idea what this could be?
Many thanks in advance,
Andreas

Hi Rakesh,
It's a BASIS problem. After transport during process chain activation, the background user tries to logon with the password and if it fails the chain will not be activated. The contents will be transported though. You can manually activate the chain. You can request the Basis guys to fix this.
- Ram

Urgent,: Info package prob in process chain creation..

Hi Experts,
I wanted to create a process chain for my master data, so then i started creating it, initially when i started executing info package which is the first step to undertake, the list of info packages is not generating when in clicked upon search icon. Rather it says "no data selected". Am not familiar in creating process chains. This is the first time i started creating.. Could you plz assist me with clear information in how to resolve this?
Thanks.

Hi,
Check this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
/thread/471435 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a35cb9-fc1c-2a10-cfa8-94b94e5ac7a9
documentation about the complete sap-proces-chain
Kind Regards,
Arun.M
Edited by: M Arun on Jan 10, 2008 4:06 PM

Process Chain error during info package execution

I'm trying to load master data into 0CURTYPE using process chain.
I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
On scheduling the process chain I get an error during the execution of the info package
"Could not find code page for receiving system
For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
Is it relatred to some setting whihc I have missed out?
Any help on this please?
Thanks,

Hi, this is a issue related to idocs in the source....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
this issue belongs to source...
They have to run a report:RBDAGAIN to process the errore idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
if this occurs regularly they have to change the settings in SM59..
refer exact note for this: 784381
rgds,

Help with Process Chain - Stop remaining Processes if Package returns 0 rec

Hi, i have a Process Chain that starts with a single InfoPackage. Then it goes on to distribute the load to multiple DSO's and then onto DSO Activation. I would like the Process Chain to stop right after the InfoPackage if no records are loaded.
Is this possible using the decision variant somehow? Any details on how to achieve this are greatly appreciated!

Hi ,
The request is goin to red status when 0 records are pulled in. There is a option in info package so that even when 0 records come in the request status would be green.
Open your info package , then in the menu goto "Scheduler > Treatment of warnings > Select Green" so that in future even if the info package pulls 0 records the status would be green . then the activation step in the process chain would also be carried out smoothly.
In this way you need not manually change any request status to green . Saves you time.
regards
Venky

Hierarchy info-package list not available when adding to process chain.

Knowledgable experts:
We are on BI 7.0 and I'm trying to add an info-package for a hierarchy load to a process chain.
The process chain already exists with master data text loads and attribute loads.
I want to add a hierarchy load to the process chain.
- When I select Execute Infopackage process type the pop up box to 'Insert Execute Infopackage' is displayed.
- The Load Data dropdown box does not display any infopackages to choose from. The infopackage does exist and executes correctly.
Why can't I see any infopackages in the dropdown box?
We are on SAPKW70013 Support package.
Thanks for your assistance.
Den

Thanks for the quick reply.
This is a new install, no upgrade.
I think I found that I need to do a Save Hierarchy process type to get the hierarchy in the process chain.
However, I would still have the question, why I don't see any of my transaction data loads that are in 3.x formats?
I will look at the OSS note.
Thanks
Den

Scripts, Packages and Process Chains

All,
Is the best practice to create each individual process chain for each script logic file or create one and use it for all the scripts? If I execute 2 scripts at the same time, will I encounter any locking issue?
Let's say I have Script1.LGF and Script2.LGF to perform to different activities. If I link it using the same process chain with Run logic, will the Script2.LGF execution file if Script1.LGF executes?
Thanks for your inputs.

Hi,
Yes I agree. Too many process chains would add to your maintenance. You could have once process chain and modify the dynamic script of each package you create in a such a way that they run the logic assigned to them.
If you are running the packages that are writing the same data region, you would come across concurrency data locks.
You could also check the usage of package links in your case, as you could group the packages to run one after another. (Example: Import the data from a flat file, Run the currency conversion and Run the lite optimizatio etc.) This is just an example, you could have your DM packages in the sequence driven by your business
Thanks

How to identify the info package deleted by someone in process chain?

Hi all,
I can see a couple of info packages were deleted in the production system and it was removed from the process chain too!!
how to identify who has deleted the info package in the production system:?
Thanks

Can you is there any transport available with the Infopackage deletion activity?
in SE01 you can check in production system and check if your IPAK is stored in it or not..? IF yes then you can check the user.
Also you can track is there any deletion transport has come from D to P or Q to P? Can you check whether the IPAK is available in D and Q?
Also you can check the process chain recent modified by in RSPC and check if there is any user details were captured?
OR you can also look at in transaction SLG1. Check for the logs..
Hope this helps,
Murali

Dm package(process chain: /cpmb/load_infoprov_UI)

Similar Messages

Maybe you are looking for