Process Chain Terminates without errors

Hi Experts,
I'm facing a strange situation; my process chain terminates half way though. Loops are not completed till the end. e.g. it runs the Info Package and DTP then stop there, in some loops only the Info Package is run.
There are no error messages.
i can go to each process and update the targets manually. All are successful no errors.
Does anyone have a clue as to why it will stop half way?
Thanks
FAzal

Hi,
Can you please tell whether this chanin has trabsported.
In the RSPC in the process chain tab there is a option called reset to active version other wise activate the chain and try to start.
hope this helps.
Cheers,
Vikram

Similar Messages

  • How repeat a process step in a process chain automatically after error?

    Hello guys.
    Have some method to repeat automatically a process in a process chain after a error occur ?
    Now, we need to make a manual procedure for repeat the process... We need make it more "fast", one "auto repeat" when failing.

    Hi Leo,
    Auto repeat of a process chain is always not ad visible as in most of the cases we can see the job got finished in SM37 and even spool got generated but unfortunately it will fail if any of the data package is wrong.In these cases we can skip the process chain and make it continue.
    I have written a blog on the same.please go through it.i feel for those scenarios it is good.
    How to override a process block in the process chain and make it force complete ?
    My personal advice is to go and check the job log before repeating any process as the job may fail for n no of cases.it is a complex challenge of adding all those errors tracked.
    Regards,
    Kannan

  • Process Chain Ended with Errors - cause unknown

    I have had several instances of process chains stopping for no apparent reason.  The stops occur between 2 master data infopackage loads.  The last step is green and the next is grey.  The PSA table has been updated successfully for the last step.  All IDocs are in green status in both systems.  The monitor for the last successful step does say "Ended with Errors" although no errors are evident.  The process chain starts back up via Repeat at the next (grey) step and continues successfully.  There were no system problems or connection interruptions that occurred during the time the process chains failed.  There were no changes in the remote user profile.
    This exact problem has occurred a half dozen times since our application of ECC Support Packs several months ago and had not occurred before.  The infopackages are different each time. Two different process chains have had this problem.  I have re-activated and re-scheduled the process chains without solving the problem.
    Thanks for any ideas on why this may be occurring or what I can do to prevent it.
    Patty Moffatt

    Hi Des,
    Here's my BW release info:
    SAP_ABA        640       0019 SAPKA64019     Cross-Application
    SAP_BASIS      640       0019 SAPKB64019     SAP Basis          
    PI_BASIS       2005_1_6400009 SAPKIPYJ69     Basis Plug-In
    ST-PI          2005_1_6400008 SAPKITLQH8     SAP Solution Tools Plug-
    SAP_BW         350       0019 SAPKW35019   SAP_BW                      
    ECC SPs 13-21 were applied before the BW problem started:
    SAP_BASIS      640       0021 SAPKB64021    
    SAP_ABA        640       0021 SAPKA64021    
    PI_BASIS       2005_1_6400012 SAPKIPYJ6C   
    ST-PI          2005_1_6400008 SAPKITLQH8    
    SAP_BW         350       0021 SAPKW35021   
    PI             2004_1_5000016 SAPKIPZI6G    
    The process chain step and the monitor load both are green.  The Details tab shows all the processing is green, but the Process Chain itself is red with "Errors Occurred.  There have been no runtime dumps.
    Patty

  • Process chain - ODS Activation error

    Hello All,
    I have a process chain which has the following data load sequences:
    Load data to ODS
    Activate ODS
    Load data to ODS2
    Activate data ODS2
    Load data to ODS3
    Activate ODS3.
    Used the Program to RSPC_SYNCHRONOUS_RUN to schedule the process chain in Background.
    When the process chain is executed in background it loads the data to ODS1 and Activation process is not happening. It registers short dump like shown below at the end. But when i execute the same process chain in RSPC, Schedule option with Start variant set to immediate, it is activating the ODS Data and completes the process chain Succesfully.
    Help me to solve this problem.
    ABAP Short dump information:
    Invalid interruption of a database selection.
    t happened?
    Error in ABAP application program.
    The current ABAP program "GP4BRKGANFKJY5K2A3ACVGAPTN4" had to be terminated
      because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    Unable to perform database selection fully.
    record.
    t can you do?
    If the error occurs in debugging mode, you should first run the process
    without debugging activated.
    If the error persists outside debugging, you must check the application
    program more closely.
    No error requiring recovery has occurred.
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
      termination messages, especially those beyond their normal deletiondate.
    is especially useful if you want to keep a particular message
    Error analysis
        An exception occurred. This exception is dealt with in more detail below
        . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
         neither
        caught nor passed along using a RAISING clause, in the procedure "ACTIVATE_ODS"
         "(FORM)"
        Since the caller of the procedure could not have expected this exception
         to occur, the running program was terminated.
        The reason for the exception is:
        One of the database selections included a database commit.
        The selection was then supposed to continue. Before a
        database commit, however, all outstanding database selections must be
        concluded.
        Possible causes in the application program:
        Within a loop (SELECT/LOOP/EXEC SQL), one of the following
        statements is used:
        - MESSAGE (apart from MESSAGE S...)
        - COMMIT WORK
        - ROLLBACK WORK
        - CALL SCREEN
        - CALL DIALOG
        - CALL TRANSACTION
        - SUBMIT
        - BREAK-POINT
        - WAIT
        In debugging mode, a program sometimes triggers
        a "COMMIT WORK" during the database selection. As a result
        this termination may also occur in debugging mode with a correct
        program.
    A "COMMIT WORK" during debugging may be due to the following reasons:
    1. A program or screen was regenerated
        and updated in the database.
    2. Each user needs a private process in debugging mode, but
        the number of available processes is restricted. If this
        limit is exceeded, each debugging step then requires a
        "COMMIT WORK".
    The error occurred in a statement that accesses the table "/BIC/AZXOQMATR40 ".
    Thanks in Advance.
    Points will be assigned.
    Regards
    M.A

    Hi,
    If it is a daily process chain u define it on a periodic basis in the variant and it'll run successfully.
    I guess the DUMP may be due to less processes at the time u run...It is gving the same in the dump also..
    So when u run the chain immediate in the BKGD the ODS will be automatically getting the required processes dailog and bkgd to run according to ur settings and it was successful..
    U try to execute the chain using FM: RSPC_API_CHAIN_START and give the tecnical name of the chain under I_CHAIN filed and conitinue...It'll scedule the chain in the BKGD only and if it is a periodic one the chain will be automatically ready for the next run also...
    rgds,

  • Process Chain Transport import error

    Hi
      I created a Process chain with Start variant "Start Using Meta Chain or API" and collected all the objects of process chain  in a transport request
    The Transport import failed with RC 8 error
    Error Log:
    Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
    0 Chains Were Selected
    Specifying process chain ID 'XXX, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
    Please update me what  is the reason of error and how to resolve this
    Thanks

    It sounds to me like process chain (PC) that's starts up PC that you trying to transport is not present in target system yet ?
    Might be that there is a link between them...

  • Process chains get an error when run analysis process

    When my PRD system‘s process chains run analysisi process, I  gets below error message:
    Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
    Message no. BRAINOLAPAPI011
    Diagnosis
    Failed to start the MDX parser.
    System Response
    Error when opening an RFC connection (FUNCTION: 'R
    Procedure
    Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
    It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
    The Sys Log in Transaction SM21(error part):
    M Wed Mar 19 09:22:50 2014
    M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
    M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
    A  RFC 1878  CONVID 18933904
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
    A  RFC> User: JY-LKZ (Client: 900)
    A  RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
    A  RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
    A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
    FUNCTION: 'RfcExecProgramKernel'
    RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
    [abrfcio.c    9213]
    A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    M
    M Wed Mar 19 09:23:15 2014
    M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
    M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
    A  RFC 1878  CONVID 18968493
    A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
    A  RFC> User: TMSADM (Client: 000)
    A  RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
    A  RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
    A  RFC SERVER> Caller host:
    A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
    A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
    FUNCTION: 'RfcExecProgramKernel'
    RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
    PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
    [abrfcio.c    9213]
    A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE.
    ps.
    1、IT's everything ok in the development system.
    2、It’s ok when i repeat this analysis process .
    3、It’s ok when i run this analysis process in analysis process designer.
    4、Attachment is the sys log in sm21.
    Thanks everyone.

    Hi Vignesh.B,
    Yes,it's not user's problem . But i don't  think it APD's problem .Cause all APD has the same problem and .
    Below is one of APD souce and target :
    Hope this information  is useful .
    Regards,
    Lian

  • Process chains in red(errors occurred), monitoring in green

    Hi friends,I have same problems with the monitoring / process chains.
    For exemples in the Monitor for OMAT_SALES in the tab Status I have green for Total and Technical with the message:
       Data successfully updated
       Diagnosis
       The request has been updated successfully.
       InfoSource : 0MAT_SALES
       Data type : Texts
       Source system: PRD-600
    In the tab Details I have:
    -the Overall status in red, error occures or missing messages
    -the requests, extractions,transfers,processing-everything is Ok-green
    -the Process Chains-errors occurred-red
    In the transaction RSPC the infopackage for load data OMAT_SALES is red,the next infopackage in the chain is green.
    What can I do to fix this problem  for Process Chain in RSPC and also in Monitoring (tab Details)?
    I will apreciate any answer,
    Thanks,
    Claudia

    The next connected infopackage must be connected with Always link that's why its processed even after the failure node. Go and cross check what errors you got for the failed process, and reload it manually.

  • Process chain failing with error 8 in BI 7.0

    Hi ,
    we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
    But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.

    Hi,
    user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
    bye
    Frank

  • Send Message from Process Chain Step without Process Log

    We send a mail message, depending on the success or failure of the process chain step, to user list.
    When the message is sent not only custom message but also the status information and the process log are sent.
    Our users are only interested about the result of the chain and they don' t want to view all technical information.
    Is it possible to send message without process log?
    Regards

    Hi,
    Take 2 process(red and green line) from each of the process in the process Chain, one is for sucessfull and other is for failure and at the end of the proces chain,  just put all failure process to the OR and have add a ABAP Program (with Not Sucessfull) and then just put all sucessfull process to the AND and have add a ABAP Program (with Sucessfull) .
    This wil send the mail to the users, when ever there is failure in PC any where, or sends a mail ..if the process chain completes sucessfully.
    If you want only add the send of mail option at the end of the process chain, we can just add 2 process (red and green line) and have same flow as above. so that.. it will only sends mail..when there is failure or sucessfull of the process chian.
    Hope it helps ......

  • Transporting Process Chains-includes the ERROR DTPs in the Target System

    Hello Gurus,
    Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
    This will cause a problem
    1.these would run parallel to the regular DTPs.
    2.no of back ground processes running at any point will be beyond our limit.
    Let me know if you have faced the same issue and how you resolved it.
    Thanks
    Jagadish

    Hi DPN,
    Check oout this thread. This might solve yuor problem.
    Errors in Transportation
    Thanks and Regards
    Subray Hegde

  • Process chain failures and errors therein

    Hi all,
    Can anyone please guide me as to why the process chain fails?
    what are the <b>various kind of errors</b> most often encountered? and how we can recifty them.....???
    Your kind suggestions are thankfully acknowledged,
    thanks and regards,
    shalini.

    Hi Shalini,
       Process Chain fails due to several reasons. if you come up with any questions our masters will guide you.
    Process Chain fails mainly due to data problem.
    Regards,
    Nagesh.

  • Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

    Hi,
    process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
                                                                   Save Status and Trigger Events if Appropriate**

    Hi Neha,
    When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
    Save Status and Trigger Events if Appropriate**"
    I have come to know that there is one ABAP programe when we go to manage varient.
    ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

  • Process chain  failed -- No error

    Hi ,
    I have a PC  showing failed status in  a local chain . But every thing is Okie  in that local chain
      After coming outof local chain , next process is Attribute chain .
    How to manually  do it ?/ or repeat it . no  repeat option is available  too.
    My team suggest me to start this  local chain again and not to do Attribute chain run manually. why so?/  please help me .
    Any error handling docs on process chains is highly appreciated.
    my id  is [email protected]
    Regards,
    Pavan

    Hi Pavan,
    You need to fix the error first. i.e. execute Attribute change run manually.
    After successful completion, go to the process chain and  right  click on the next step ( next to attribute change run ) it will give the 'repeat' option.
    Hope it helps.
    Regards,
    Aditya

  • Long running process chains - No Dump / error message.

    Hello,
    We have defined some steps in process chain that contains default macros. We mainly included that to ensure calculations happens even when users dont open or access the DP Planning book.
    Issue is, these steps are running endless. normally it takes some 400 n odd seconds. But its running for the last 60000 secs.
    No. of Planning objects or CVC is 2027 only. I had to cancel them and tried to re run this step or the whole chain no luck....
    I have checked active jobs in SM37, there is none. So ideally there is no load on the system. Also no change to Macro or CVC's has been done. there was only one Transport that was moved and it was on the product master.
    Also I have done the time series, Live cache, PA  Consistency checks. only in Live Cache there was some Superflous time series and it was corrected.
    I am not getting a clue of why its happening nor where to start the analsysis.
    Any help or suggestion is greatly appreciated.
    Currently I have made the subsequent events as independent,&  the chain is running execpting this step.
    Many Thanks
    Aswath Ram.

    Thanks for the reply,
    These are custom macros. It adds two KF and copies to another.
    The no. of periods is 24 time periods and roughly no. of CVC is 2100.
    Another thing, this process chain has been running for last 5 to 6 months with no issues. Since sunday, its messing up....
    I am doubting if its taking time read data from table or live cache. or is it because of some indexing. Not sure how to check that.
    have asked Basis to check the system performance, if it might cause this issue.
    Many Thanks
    Aswath

  • Process chain failure SQL ERROR 942 ORA-00942:table or view does not exist

    HI all,
    We have a proces chain with 'ceate index' process type and got failed with an error as follows......
    SQL ERROR 942 ORA-00942:table or view does not exist
    Plz can anyone give solution for this error.
    SATISH.

    Hey Satish,
    Please refer to this thread:
    BRCONNECT fails with SQL error -942 at location ora_vers_get-1
    I am sure the solution there should solve your problem. There are various other discussions about this error in the forum, I suggest you look through them for better understanding and additional material.
    Cheers!!!
    Manu.

Maybe you are looking for