Process Execute InfoPackage, variant 2LIS_12_VCHDR Delta Upload 2 has statu

Hi All,
i am loading trx data.but load was failed.failed request is showing " Process Execute InfoPackage, variant 2LIS_12_VCHDR Delta Upload 2 has status Ended with errors (instance REQU_4B9BAQK7NIXFRH9RKD0VF5LWP). why this error is comimg frequentely.i want to know the reason and how can i solve this issue? please help me.
Thanks,
Turan

Hi Turan,
Can you send the details error from DETAILS tab ?see all the process levels like Requsets,Extraction,Transfer& processing .
Regards
Pcrao.

Similar Messages

Process Execute infopackage ,variant 0salesorg _text has status cancelled(i

Hi All,
i am loading thr master data.but load was failed.failed request is showing " process Execute infopackage ,variant 0salesorg _text has status cancelled(instances).why this error is comimg frequentely.i want know the reson.how can i solve this issue.please help me.
Thanks,
chandu

The job would have ben manually cancelled by the user.
It can also be some shortdump,check ST22
Else could be due to communication failures.
Connection problem.
To check for the connection,Goto RSA1-> source system,
select ur source and right click and check.

Attribute Change Run" process cannot precede process "Execute InfoPackage

hi all,
i have changed process chain, after changing the chain i have click the check button and activated. then iam getting this error
A type "Attribute Change Run" process cannot precede process "Execute InfoPackage" var. ZPAK_C0BVLUDKPEPXGXFMHQ67RFI9L in the chain.
please help me out
thanks advance
sudheer.

Hi,
Your process chain shud have the following sequence:
Start Process> Loading of master data> AND process (if u have multiple master loads)-->Attribute Change Run
And all the linkages between the processes shud only be "SUCCESSFUL". Create new variants for all processes you enter in your process chain.
Check you chain before you activate. If it gives you exlamatory sign, the also u can go ahead with activation as it is giving u just the warnings.....
Hope it'll help u.......
Preet

Process Chain Master Data Failed.Showing Entire chain has status R

Hi,
Everyday SDMasterChain is running successfully.
Today one of the localChain or subchain has failed.
I have noticed that it has failed because last delta for one infoPackage has not yet completed and chain showing status "Entire chain now has status 'R'"
Can anybody resolve the issue?
Below is te log for the error.
Job started
Step 001 started (program RSPROCESS, variant &0000000113991, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 created request
Request REQU_449HFL0OFD22BSU2GX1X2MJJJ could not be generated with InfoPackage REQU_449HFL0OFD22BSU2GX1X2MJJJ without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 in Process Chain
Entire chain now has status 'R'
Process Attribute Change Run, variant Compounding Object has status Undefined (instance )
Process Save Hierarchy, variant Generated from LOADING ZPAK_3VBSFASA7NWCNP1JX9WXI5 has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_ATTR - Full has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TEXT has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TID_LKDH_HIER has status Undefined (instance )
Process Execute InfoPackage, variant ZMAT_SALET - TEXT has status Undefined (instance )
Process Start Process, variant Bekaert Master Data Loads - Start Variant has status Undefined (instance 449HEDPDI8N6AP5XKDUODJS6N)
Process Execute InfoPackage, variant Load from 0MAT_SALES_ATTR into ZMAT_SALE has status Undefined (instance REQU_449HB4K9K3W7GPJEF52YM83N3)
Process Execute InfoPackage, variant Load from 0MAT_SALES_TEXT into ZMAT_SALE has status Undefined (instance REQU_449HJOO6322QV09OL73P18ODR)
Process Execute InfoPackage, variant ZMAT_SALEM - ATTR - FULL has status Undefined (instance REQU_449HEJW4S44QAUTY9LQKH4QY7)
Process Execute InfoPackage, variant Delta load from 0MAT_PLANT_ATTR into 0MAT_PLANT has status Undefined (instance REQU_449HFL0OFD22BSU2GX1X2MJJJ)
Termination of chain has been reported to meta chain 449CKM1O64AHRLQJLNZ2GBWQ7
Message sent successfully
Job finished
Rgds,
CV.

Hi,
There are times when Master Data load compel us to do Re-Init. I guess you need a Re-Init.
Check theses links:
1: Re: Update mode R is not supported by the extraction API
2: pl help me with repeat delta for text info object
Regards
Happy Tony

"Attribute Change Run" process has to follow process "Execute InfoPack

Hi All,
i created process chain for M.D SD area. here i created start varient, then execute info package process created and when i am checking that it showing some warning message like ....
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4B9B5FH2BTQJOBTBAWHVM5ZY2 in the chain.
Here i can't understand what i have to do....
Any inputs for this...........
Thanx in Advance
Subbu.

hi,
Check master data objects in both process types "Excute info package" after start varianet and in attribut echange run process type.
Both should match or system will throw error message.
The concept is like Attribute change run has to run when ever new data is loaded to master data attributes.
Regards,
Arun Thangaraj

Init and delta uploads using process chain

Hi,
I have a scenario where for the first upload i use init upload for that i have an infopackage now for the subsequent uploads i.e delta upload i get the option for the same only once i have run the init upload.
so the doubt is can i use a process chain defined to carry out the whole task?????
Regards

Hi Virat,
AS init is a one time activity, so what you can do is.
1> set the init in infopack and run the process chain.
2> remove the infopack and then include a new infopack with delta option or change the existing infopack to delta option.
3> schedule the infopack.
whatever you are expecting is not possible.
Hope I answered your question.
THanks and Regards,
Suneel

Insert Execute infopackage on process chain maintenance

Hy, i have a serious problem: i can't insert a infopackage on process chain that i created on AWB.
When drag the insert "Execute infopackage process" on process chain and select the match code or F4 button to select an infopackage , receive this message:No data selected.So i can't insert infopackage in my process chain.
Could you help me?
Thank's a lot.
Sincerely yours
Andrea Maraviglia

Hi,
Go to rspc. At top of left pane you can see a data target icon. Click on that. Select your data target. Check the infopackage ckeck box. Here you can select your infopackage.
Try this out.
Regards,
Amruth

Delta upload in different times and targets

Dear BW Gurus,
I have to fill a Master Data table with a delta (for performance reasons) from an ODS object, and later fill an InfoCube with the same delta from the same ODS Object. This two step approach is necessary because the Cube uses the Master Data filled in the first step - so I cannot do the two uploads within the same InfoPackage.
My approach was the following in a Process Chain:
1. Fill and activate "source ODS"
2. Load request from "source ODS" to PSA only
3. Update Material Master from PSA using "Read PSA and Update Data Target" process with the variant setting the PSA table and the Master Data InfoObject as Data Target.
4. Run "Attribute Change" process for the Master Data IO
5. Update InfoCube from the same PSA that was used for the Master Data InfoObject. This is also a "Read PSA and Update Data Target" process with the variant setting the same PSA table as before and now the InfoCube as the Data Target.
To me this seemed logical but when I run the Process Chain I got the following error message at point 3 (update Master Data from PSA): "No request for posting found in the variant".
This appears strange to me because if I specified the request, it would only work for the first upload and not for all the others.
Can anyone please help me how to overcome this issue of Delta upload in different times and targets?
Thanks in advance,
Attila

Gopi,
If I create two delta InfoPackages, the first one clears the delta queue, so the second InfoPackage won't find any data. This is unfortunately not the way to do...
Srini,
Your proposal is quite original - if I upload the same ODS with its data (amended by the date field) that would in fact generate a new delta for the same ODS.
However, in the meantime a more simple idea came up in our BW team, inspired by your proposal. For the uploading of the Master Data I now don't use the delta functionality of the ODS export Data Source, but instead I set up a full upload filtered for the actual date. This ensures the good performance of Master Data load (load time will not increase with time) and also we will have all recent Master Data uploaded from the ODS because that load is in the same Process Chain where the "Source ODS" is updated. Later in the same Process Chain I simply start the delta upload for the Cube.
Thanks a lot for all your help.
Attila
P.s. I will be out of office for until 24th July.

Failure in Delta Upload

friends,
       we have delta upload for our purchasing data to BW. from the infopackages the data is Updated to ODS- 0PUR_O01, which provides data to Infocubes - 0PUR_C08 and 0PUR_C07 and ODS 0PUR_O02 ( which in turn provides data to infocube - 0PUR_C09 ). 3 days back one request in ODS 0PUR_O01 went into error status. WAfter marking the request "RED" it was deleted from the ODS, but since the request had the same PSA_ID as that of an another successful (GREEN) request in the same ODS with data mart status ticked, this request also got deleted by mistake, as a result the datamart status for all the request in the ODS (0PUR_O01) is missing, from this time onwards the subsequent data updates to infocubes 0PUR_C08 and 0PUR_C07 and ODS 0PUR_O02 (also to Infocube 0PUR_C09 ) are finishing in Error status. we have deleted all the requests (after marking them "RED") for previous three days from the data targets ( infocubes 0PUR_C08, 0PUR_C07, and 0PUR_C09 and ODS 0PUR_O02). we also have deleted the correposnding requests from ODS 0PUR_O01 (after marking them "RED").Now when we are trying to reconstruct the requests at 0PUR_O01, it goes successful, but when we try to activate the requests into subsequent data targets ( back ground job BI_ODSA* ) the job fails with a short dump and the following error message.
Error Message:-
Check Load from InfoSource 80PUR_O01 , Packet Delta Package for Update by ODS 0PUR_O01
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Short Dump:-
What happened?
   The current application program detected a situation which really
   should not occur. Therefore, a termination with a short dump was
   triggered on purpose by the key word MESSAGE (type X).
What can you do?
   Print out the error message (using the "Print" function)
   and make a note of the actions and input that caused the
   error.
   To resolve the problem, contact your SAP system administrator.
   You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
   date.
   is especially useful if you want to keep a particular message.
Error analysis
   Short text of error message:
   Request 0000017556 in ODS 0PUR_O02 must have QM status green before it i
   s activated
   Technical information about the message:
   Message classe...... "RSM1"
   Number.............. 110
   Variable 1.......... 0000017556
   Variable 2.......... "0PUR_O02"
   Variable 3.......... " "
   Variable 4.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
How to correct the error
   Probably the only way to eliminate the error is to correct the program.
   You may able to find an interim solution to the problem
   in the SAP note system. If you have access to the note system yourself,
   use the following search criteria:
   "MESSAGE_TYPE_X" C
   "SAPLRSATREE" or "LRSATREEF28"
   "RSATREE_START_ACTIVATION"
   If you cannot solve the problem yourself and you wish to send
   an error message to SAP, include the following documents:
Please suggest a solution for this problem and to bring back the missing data mart statuses of the all the requests in ODS 0PUR_O01.

hi olivier,
   the said request is in ODS 0PUR_O02. will try to explain the scenario:
the data flow in this regard is:
PSA ->          Infopackages                       -
> *
          (2LIS_02_SGR, 2LIS_02_ITM etc.)
*-----> ODS (OPUR_O01) --> Infocube (OPUR_C07)
*-----> ODS (OPUR_O01) --> Infocube (OPUR_C08)
*-----> ODS (OPUR_O01) --> ODS (0PUR_O02) -
> ***
----> Infocube (OPUR_C09)
now when we try to reconstruct a request in ODS OPUR_O01, the a new request is created (Requid- 175429) with green status but without datamart icon. Now when this request is activated in 0PUR_O01 and since "Activate ODS object Data automatically and   Update Data Targets from ODS object automatically" is checked in 0PUR_O01, new requests are created in ODS 0PUR_O02 (Requid- 17566)and infocubes OPUR_C07(Requid- 17566) and OPUR_C08(Requid- 17566). All these requests are with 0 data and PSA_ID are also 0. and then the above short dump and error comes in.. one thing to note here is
"Activate ODS object Data automatically and   Update Data Targets from ODS object automatically" option is also checked in ODS 0PUR_O02.
Hope this clears up everything..
Edited by: Nivin Joseph Varkey on Jan 14, 2008 7:20 AM

Routine,delta upload

Hi experts,
i am new to bw and sdn .
can u answer for my questions ,i was asked in my interview.
1)what is the scenario of start routine?
2)how to generate a report for present year and previous three years?
3)what is the mechanism behind delta upload?
thanks in advance
regards
krisna

Hi Krishna,
1) Start Routine - Start routine is executed prior to executing of transfer rules, so if there is any global variable to be used in all transfer rules then it is better to declare that in start routine.
After start routine execution is over then transfer rules r executed.
Start routine are at two levels
1. update roule
2. transfer rules
start routine is processed once per data package load .For ex : you want to eliminate a set of records based on dome criteria you can do that with start routine . But update rules or transfer rules are processed once per data record where you can manipulate each single record .
There is an internal table called data_package which will have all the data available for processing you can later store all the data in another internal table (you can declare) which can later be used in update rules .
3) Delta Upload Mechanism - Regarding the Delta upload mechanism, it's simply the mechanism that helps updating only the changed data, and not the full update. The field 0RECORDMODE determines whether the records are added to or overwritten. It determines how a record is updated in the delta process: A blank character signifies an after image, X a before image, D deletes the record and R means a reverse image.
You can check following link for details.
http://help.sap.com/saphelp_erp2004/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Regards,
Ashish.

Delta upload in XI and calling Infopacakages in Inbound Proxy

Hi All
I have a scenario where File--->XI----->BW
In this scenario I have to pick a file compare and send it to BW system. Before sneding into the BW system I have to apply the logic of delta upload in XI.
Requirement: the recent file picks the data for the current week and previous week . We have to eliminate the data of the previous week and send the recent weeks data to BW in file format i.e. data of recent week will be sent eliminating the data of previous weeks.
I have one more query
How to call the 6 different infopackages in ABAP Proxy.
Do anyone know the process for doing the same??
Regards
Abhishek Mahajan

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
that will be a good guide

How to create process chains, infopackage groups & Meta chains

Hi,
can anyone explain me about process chains,infopackage groups & Meta chains.
if possible give me examples for each.
Thanks & Regards,
cheta

<b>Metachain</b>
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for <b>Process Chains</b> in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube frm DSO )
8.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
\___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute Infopackage
8.Create Indexes for Cube

Delta upload for generic data sources.

Hai All,
I tried as per SAP online document , but still i am not getting the result i.e delta upload from the BW side. Here i explained everything what i did.
In R/3
1. I have created a table with 3 fields SNO, SNAME, DOB
2. Then i created some entries in that table.
3. With Tr Code RSO2 i created one data source. Here i took Master Attribute Datasource
4. In generic delta i took the Generic field as DOB. and Time stamp and upper limit 10 sec.
In BW side
1. I have replicated the data sources under application compone in which i have creatred in R/3..
2. Then i activated that data source and created infopackage for that.
3. in the selection i have specified 01.01.1900 to 01.01.9999
4. First i made Full Update then i get all the records from R/3.
5. In R/3 i have created 2 more entries.
6. In Infopackage UPDATE Tab i have selected the Initilize Delta Process ( Initialization with Data Transfer).
For this i am getting the error message as follows.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Here i closed the all things in R/3 as per the note mentioned above. Still it is giving the error message.
If i select the Intilization Delta Process( Intilization with out Data Transfer) then i am getting the option Delta Update . I selected this Delta update and scheduled but no data is coming.
Please help.
Regards
Prashanth K

Hai Sachin,
I am getting the problem at PSA only. Actually that is connected to ODS Object only. Until unless we don't get the delta data into PSA we can't proceed futher. So please help. I am working on NW 2004S.
Regards
Prashanth K

Help with DTP with Processing Mode No Data Transfer, Delta Status in Source

Hi, I am trying to test a Cube to Cube Extraction where I do a full DTP Extraction for a specific account to get the data I need and then a DTP Delta Init by using Processing Mode "No Data Transfer, Delta Status in Source".
When I do the DTP Delta init using Processing Mode "No Data" this is done in Dialog mode, but is taking an extrodinarily long time to run as it looks like it is going back through all of the source infocube requests to somehow determine the delta marker. The source infoCube does have a lot of requests, but I would think this would be a very quick process to set the marker.
Any ideas why this dtp init delta with no data would take soooo long?

Hi, Thanks for the information, but I see in the documentation that this type of proces is run in dialog mode. Could you point out where this process type would run in background only? Can anyone tell me why this would run so long?
No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
This is analogous to simulating the delta initialization with the InfoPackage.
*In this case you execute the DTP directly in the dialog. *

0FI_GL_4 - partionioned Delta Upload ?

Hi everbody,
for performance reason I want to try a partitioned delta Upload from 0FI_GL_4 .
That is loading the PSA / DSO in parallel with parallel processes:
-with selction Criteria FY=2011.01
-with selction Criteria FY=2011.02
-with selction Criteria FY=2011.03
It seems to be that I need two InfoPackahes to load PSA per selection criteria:
One to initialize and one for the monthly Delta extraction per selection criteria.
Is there No Way arround to build per selection two InfoPackages ?
-InfoPackage 0FI_GL_4 with selction Criteria FY=2011.01 Update Mode: Initialize Delta Process , Initialization with Data Transfer
-InfoPackage 0FI_GL_4 with selction Criteria FY=2011.01 Update Mode: Delta Update
Whats best configuration ?
Thank You
Martin

Hi
it should be done automatic without of anymanual interference ...and dozenense of double InfoPackages...
with few differentiation....
Best Wishes
Martin

Process Execute InfoPackage, variant 2LIS_12_VCHDR Delta Upload 2 has statu

Similar Messages

Maybe you are looking for