Process order and user time zone

Our system server time zone is CET but we are using EST for user time zone and plant. When we create process orders, the creation date/time is using the server time zone CET.
I understand that in the database, the CET time is used but Is there a way to show the timestamp in the user time zone EST?
Thanks,
Ghislain

Hi Lisa:
We usually let USers maintain their own time zone even though its different from System Time Zone.
When it comes to SAP systems, BASIS usually maintains this and it will most proabably the time in their zone.
And users have their own time zone.
It effects only for support Deelopers who migh tlook at failed jobs in SAP/BW and try to decode them. In this case, they will have to know the differences in TIme Zones, but its not a bog problem.
Ram C.
Message was edited by: Ram Chamarthy

Similar Messages

System time zone and User time zone is differenct.

Hello friends.
We use SRM 5.5 with classic scenario. (SP07)
Our system time zone is CET.
Now if we have a user different with a different time zone in the user master, for example, a UTC+9.
We can end with up with a received date in service BBPBWSP_SIMPLE that is before the created on date in the shopping cart.
A shopping cart is created at 2006.05.10 but the received date in Approval says 2006.05.09.
So approver can be confused the requested date.
Is this standard bugs or standard design?
How can we change the received date with user Time Zone?
Thank you,
Best Regards,
SH.

Hello,
As far as I know, if you do not populate the field "of the user" in SU01, system takes the pattern timezone, which is UTC, to display to the end user in web gui.
I did the following test:
- I created a RFX with a user who's timezone (in tx SU01) is set as:
Sys. Time Zone     CET
of the User        INDIA
- CET time was 20:01:55
- GMT time was 18:01:55
- India time was 23:31:55
Looking at this RFX in BBP_PD I see the following:
Same user (India timezone and CET as "Sys. Time Zone"):
Created_At: 20:01:55
Changed_at: 20:01:55
DETAILS ->
Created at: 18:01:55
Changed at: 18:01:55
RFX header (description): 23:31:55
So, if you want to populate the header document in WEB GUI with another time zone than UTC, you have to use the field "of the user", under Personal Time Zone. However, if you want to display the UTC time zone in header documents in web gui, you can leave this field empty.
Kind regards
Ricardo

System time display time in user time zone

Hi,
If the system time zone is CET and user time zone is CST. But the system status always display the systime in CST.
Does any one know if this is an error behavior, or just controled by some configuration?
Thanks.
Kun

I found these 2 threads (actually got to them from non-Oracle sites since this forum's search feature is so crummy) but they aren't letting me do what I'm trying to do:
Use of :xdo_user_name
How to display username in RTF BI publisher report?
I use this code and still get nothing:
<?param@begin:xdo_user_name?>
<?$xdo_user_name?>
Same with this. Nothing but a Java error:
<?param@begin:xdo_user_name;xdo_user_name?>
<?$xdo_user_name?>

How to display system time zone if user time zone is not set?

Hi,
My application implicitely chooses ALA as time zone if the user time zone is not set.
How do I check this?

Hi,
Try using these FM's
TZON_GET_USER_TIMEZONE
GET_SYSTEM_TIMEZONE
Z_LOCATION_TIMEZONE
You can set the timezone in sy-zonlo by using the 1st FM and setting sy-zonlo in your application.
I think system takes ALA default because its the 1st timezone in the table.(check FM BWDT_LIST_TIMEZONES)
Regards,
Amit
Edited by: Amit Iyer on Aug 25, 2009 3:38 PM

Create APG ( approval granted) status in process order through user status

Dear Gurus,
My business requirement is to create APG ( approval granted) sytem status in process order through user status functionality, if possible.
This needs to be activated while creating process order itself. Any help is greatly appreciated.
Warm Regards,
Satish

As of this date, we have still not implemented a fix, but I did get some information from someone else who has.
I'll post his information here for all to see. Hope you find it helpful.
From: Joe
Yes we managed to do it.
After several false starts and CMOD/projects which suffered because only the default keys (for order number, aufpl etc) were in place and not the actual, we coded up the IN_UPDATE method in the WORKORDER_UPDATE badi. This gives us the final format after the DB save (but before the commit). The update of the STATUS using the SAP std function module was actioned successfully but the status profile was not actually passed through. We assumed that this was because of the update task - so we introduced an INSERT into JSTO instead (a bit naughty I know, but desperate needs etc). If you require anything more let me know.
Best Regards
Joe

Indian Time Zone missing from UCM User Time Zone Field

Hi,
I am using UCM version 11.1.1.3.0.
The Indian time zone option is missing from the User Time Zone Drop down in the weblogic section.
When I set User Time Zone value to (GMT+5:30)Colombo- Sri Lanka Time (LKT) which is same as Indian time zone, the time reflected in UCM is --> System time + 30 minutes
When I set User Time Zone value to (GMT+5:00)Karachi Pakistan Time- (PKT) which lags 30 minutes from the Indian time zone, the time reflected in UCM is --> System time - 30 minutes
How can I get the Indian time in User Time Zone Field (as it is present in other versions of UCM)?

Hi ,
Download Patch 13503004: UCM 11.1.1.3.0 patch (20120103_1059) from MyOracleSupport portal and upgrade the server .
After that restart it to see if that the IST TZ will be shown .
Thanks
Srinath

Nearest time zones based on user time zone

Hi,
In my application, user accesses the applet in the browser and based on the user time zone I need to display the list of available server which are near to his time zone.
Please provide me some hints on how to sort the time zones based on the time zone offset.
Thanks
Aravind

Hi,
In my application, user accesses the applet in the browser and based on the user time zone I need to display the list of available server which are near to his time zone.
Please provide me some hints on how to sort the time zones based on the time zone offset.
Thanks
Aravind

Coversion of CET time to user time zone

Hi,
I need to convert the server time which is maintained in CET to user time zone and by default the CET timing should be converted to CST if no userid is specified.
Is there any fuction module which does the same?
Regards
Kunaal.

hi,
check:
/DSD/HH_CHECK_F_TIMEZONE
/ISDFPS/CONV_TIME_ZONE
/ISDFPS/GET_SYSTEM_TIME_ZONE
/OSP/SYSTEM_TIMEZONE
BWDT_LIST_TIMEZONES

Connection 8.6 user time zone search

Hi,
I am helping a customer with their CUC upgrade. For some reason (either something happened during the upgrade, or some interns accidentally set some users incorrectly) to the wrong timezone.
What I am looking for is a way to dump the subscriber database by the users time zone setting. Foe example this morning I found a couple users in Chicago that were set to Australia/Eucla. Given that there are about 7,000 subscribers on this system going thru manually and looking for anomolies isn't a very attractive option.
Anyone know how to get a list filtered by time zone so we know where to focus because we dont have any facilities in those locations?
TIA,
Chris

You should be able to export your users out using Bulk Administration Tool and filter it out based on Timezone.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmacappa.pdf
Please rate useful posts.

How to get the all process orders and outbound deliveries based on material

Hi Team ,
I need one help from you regarding the MB 56 transaction.
My doubt is : How to get the all process orders and outbound deliveries based on material, plant and batch?
Please help me regarding this.
Thanks & Regards,
Srikanth.

Hi,
You can use ST05,to trace the program and find out,
hope it will help you...
thanks and regards,
veera.

BOM component Qty is getting rounded to next value in Process Order and BOM

We are in ECC 6.0, and maintaining BOM where Item quantities are decimal places e.g 0.3lb with respect to Hader qty. Now when we are craeting process order or exploding in CS11, we are seein that item quantities are getting rounded to next full integer e.g 1, 2 or 3.
What could be the reason for this behaviour.

In standard "lb' doesn't have decimal point
If you want decimal point
go to CUNI
select the mass
you can find the lb
maintain the decimal point as 3, & decimal point rounding as as 3, system will show 3 decimal point in process order and in CS11

Process Orders and Planned Orders data

Hi,
I am working on extracting process order and Planned Orders data into BW. I could not find any standard DataSources available for my req, so I want to develop generic extractor. the main key figures are Actual Labor and Machine Hours, Target Labor and Machine hours.
Please help me if there are any standard datasource available or ECC tables to pull the data or any standard function modules available.
Thanks,
Reddy

Hi Sanath,
Thanks for your reply. I want to pull Actual Machine hours, Target Machine hours, Actual Labor hours and Target Labor hours.
these fields are not there in PLAF table.
I am looking for a table or datasource which can give those details.
Thanks,
Reddy

Process orders and inbound deliveries

Hi All,
Is there an standard report to list process orders and inbound deliveries ??
(MB56 not a solution).
Regards,

Process orders --> COOISPI
Inbound delivery --> check this link -->http://help.sap.com/saphelp_47x200/helpdata/en/2d/1a2537a9d25f07e10000009b38f889/frameset.htm

Entourage: "Event and computer time zones do not match."

Since installing the latest update to the Mac OS (10.4.6) I have a glitch with Entourage (Office 2004 for Mac v. 11.2.3) and I believe it has something to do with the Mac OS. See below for explanation:
When adding a new calendar event to the calendar, I get an error which reads:
"Event and computer time zones do not match. In Calendar views, the event time is adjusted to display correctly." This is not true. I've checked the time zones in both my OS and Entourage and that is not the problem.
It must have to do with how it interacts with the latest update of the Mac OS. I had not updated software on my laptop for a while, and it did not exhibit this error, so as a test, I downloaded and installed the latest version of Office and tested Entourage: no error message. To be sure, I restarted the computer and tried again: no error. Then I downloaded and installed all of the latest updates to the Mac OS using Software Update: I got the error. So, I think the problem is the interaction between the latest update of Office 2004 for Mac and the latest Mac OS or maybe even just something in the Mac OS.
There are plenty of people complaining about this on the newsgroups at Mactopia. I'm not sure who needs to repair this problem - Apple or Microsoft, but does anyone know if there will be a patch issued by Microsoft to fix the problem? Or maybe my assessment is wrong and you have another solution?
Thanks very much for your help with this problem.
Dual G5 2.0 and Powerbook titanium Mac OS X (10.4.6)

I am in Ohio (eastern time) and I am also having this problem. It is not annoying but my problem is I am not able to schedule any meeting on Entourage. (It will not show if the person I am inviting is busy or not). They use the Exchange server in my company, and I read on the microsoft site that public folders and hence the calendar items are not synced. But seems like this page is for Office X and not 2004. Any clues? Is the time error related to me not able to schedule meetings? I am using latest 10.4 and Entourage 2004.
http://www.microsoft.com/mac/resources/resources.aspx?pid=resourcekits&rk=office x&article=/mac/officex/ork/KnownIssuesEntourage.xml
MacBook Pro, iMac G4 Mac OS X (10.4.7) 2 GHz, 2G RAM

USER TIME ZONE IN SU01

Dear All,
I have requirement to releated to User Time Zone. My X user want to posting date should be change according shift wise like (A, B, C). For Example : X user is woking in C Shift (11: 00 PM Date 19.04.2011 to 8 : 00 AM Date 20.04.2011) then posting date will be 20.04.2011 at 8:00 AM. At presently System change the posting date at 12:00. I want to posting date will be change at 8:00 AM on particular User.

Hi Aman,
This may not be possible, as time zone is same for all the users.
Even though you specify different time for different users in SU01 report, this doesnt reflect when posting happens.
Regards
Nagaraju

Process order and user time zone

Similar Messages

Maybe you are looking for