Process Order cannot be reversed
Hi PP Gurus,
When reversing process order for confirmed scrap quantity using tcode CORS.
System will prompt an error message. Please advice if confirmed operation scrap quantity
for process order can be reverse?
Thanks,
Sodacracker
Edited by: sodacracker on Jul 7, 2010 12:44 AM
Edited by: sodacracker on Jul 7, 2010 1:11 AM
Dear
Confirmation Reversal through CORS - is cancellation .If the process order was designed for Backflushing and Auto GR, then the reversal of all goods movment also happens when canelling confirmation.
But what sort of erro mesge are you getting ? Are u getting any period issue or scrap reversal ? Did u try in MBST ?
Come back with exct error messeg for farther analysis
Regards
JH
Similar Messages
-
Process order cancellation or reversal after sales order delivery has b
hi,
here we got one issue as user made mistake in assigning profit center in the material master of a material. when the process order execution is over, delivery has been done for a sales order. then user came to know that documents generated in the profit center assigned in the material master. but actually another profit center is supposed to be assigned.
now can we do something to change in PP to effect the profit center documents in this stage.
can any one of you suggest good solution, i will be thankful to you
regardsHi
yes you can revoke closing of process order
Go to Cor3 go to process order header
process order >>> functions >> restrict processing >>> Revoke closing
again go to Process order >> functions >> restrict processing >> revoke Tech. completion
after tht you can change your profit center
Please reward points
Sunil -
Reversal of Mvt type 552(MB1A) still doesn't reflect in the Process order
Hello Experts,
When i create in MB1A using 551 movement type(scrap), i fill the required entries Cost Center and Proces order then saved it. Checked the process order cost analysis (GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON)there were values appearing in my total/actuals cost column.
Then my issue is if i want to reverse the said document generated from 551 movement type using tcode MB1A or MBST, the value in the cost analysis is not changing((GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON) in the process order.
The reversal is done so it should be zero and no value is appearing in the cost analysis column.
Also if you will check in the Process order- GO TO-LISTS- DOCUMENTED GOODS MOVEMENTS , the mvt type 551 only appears and no 552 even the cancellation is already performed.
Thanks,
IndraWhich version of SAP are you using?
Could you please perform same action in development using MIGO transaction code. -
REGARDING PROCESS ORDER CREATION
Hi All,
While creating the process order for material, system showing the message that "Manual process order cannot be created for this product". But if we try with another user id, i could able to create the order for the same material.
Plz suggest the solution to get rid of this error.
Thanks
Arvind SHi,
The message "Manual process order cannot be created for this product" clearly indicates that the user is not authorized for Manual process order creation by COR1 transaction for this material and may be this material is planned through MRP or SOP etc. and in critical or certain situations manual process order creation is allowed to another user/user id for the same material ( type of materials/material code).
Some time organizations put such restrictions through enhancements. You can search the exact reason or logic of restriction by the help of ABAP consultant.
Regads,
Narresh -
Record time through CATS on a process order?
Is it possible to record time through CATS on a process order?
This is a requirement from our customer.No.
Production and process orders cannot be confirmed via CATS. -
MTO material - Combine three planned orders into one process order
Hi Gurus,
Does anyone know if and how I can convert three planned orders of the same material into one process order?
So:
1.
Sales order 1 (material X) --> generates Planned order 1
Sales order 2 (material X) --> generates Planned order 2
Sales order 3 (material X) --> generates Planned order 3
2.
Process orders 1,2,3 (material X) --> Process order 1
3.
Process order 1 --> reserved sales order stock for sales orders 1,2 and 3M,
One process order cannot create Sales Order Stock for three different sales order items. A single process order can produce Sales order stock for AT MOST 1 sales order/item.
This scenario can be achieved under a Make to Stock environment, where the production order creates 'generic' stock (not sales order specific).
Best Regards,
DB49 -
Error in VA01 - "Sales order cannot be processed. Check customer type."
Hi,
While creating a Sales Order in VA01, I receive this error message - "Sales order cannot be processed. Check customer type."
Could you please tell me what could be the reason for this.
Thank you,Hi,
U Can Find the Customer Type in Extras> Account Group Information> Customer Types.
There U can Make the Customer Type.
Regards..
Praveen Kumar.D -
Reverse Goods Receipt for Process Order
Dear All,
Please tell me how to reverse the Goods Receipt for Process Order for which already QM is cleared for that Particular Lot.
But Confirmation is still yet Pending.
I tried MIGO - Cancel - Material Document. But it is showing a message "Process Order already processed".
Regards
bussHi,
Use t code MB31
Movement type 102
Stock type = Unristricted use.
Reverse by entering above information then you have to manually cancel the inspection lot.
Regards,
Vishal -
Partial reversal of a goods receipt from process order
Dear All
Could anyone please help me with explaining how to do a partial reversal of a goods receipt from process order? If Iu2019m using trans CORS I have to cancel the entire operation, which I donu2019t want to do. If Iu2019m using MIGO and MT 102 I only reverse the goods receipts of the produced material, the corresponding components from the BoM is not reversed with MT 262 as they are if I cancel with CORS, and I donu2019t want to do a second MIGO transaction in which I cancel the components with MT 261. I have also tried to create an operation with a negative quantity, but without any success.
Itu2019s not an option for the business to reverse the entire quantity and then perform a new goods receipt with the right quantity.Hi again,
I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
Anyone who can help me on the way?
/WM consultant on unknown territory -
Regarding goods issue (reversal) against process order
Dear friends,
Recently i have noticed one strange thing in SAP.I have created one process order and against it i have done the confirmation.Now when i go to Transaction code mb1a and select movement type 262 (Goods Issue to process order-reversal) and give the storage location and in next screen i gave order number,material code and its qty.These material code is not maintained in the bom of order header material.And even in process order in material tab we haven't maintained this material.Also while doing the confirmation in goods movement we haven't maintained this material.Then also system allows me to do so.Which means material which i haven't issued against the process order, system is allowing me to do its reversal i.e (262).because of which system is creating the stock for that material, which is not correct.
Can we control this behaviour of system.
Thanking you guys in advance.Hi Jitendra,
This is fact and there is no standard Control available for the same.Only thing you can do is put control over Movement type 262 or try it by implementing User Exit.
I am not sure but you can use Enhancement CCOWB001 - Customer exit for modifying menu entries.
Include is LXCOWBF01.
Regards,
Dhaval -
Problem in reversing the released Process order.
Hi PP Gurus,
When I'm trying to reverse the Process order release in change process order COR2 system is not allowing me as the menu option is Gray. When I released processed order Control recipe is generated and due to some problem in PI sheet I discarded in CO60 transaction code. So can anybody please tell me how to handle this situation? I mean is this can be resolved by configuration or enhancement?
Thanks & Regards,
Abu ArbabHi Krishna,
Thanks for reply.
Now tell me what should be the approach we if we don't want to delete the Process order? Say PI sheet is created and sent to it's destination through Background job and later we found some error in PI sheet so and we've discarded that PI sheet. In case when I don't want to delete or Teco Process order, what will be the process in this case?
Thanks & Regards,
Abu Arbab -
How To Reverse Excess Confirmed Quantity in Process Order?
Hi Experts,
Good day!
I have a Process Order with Total Quantity of 68,180 L which currently have a status of TECO CNF DLV PRC BASC BCRQ GMPS MACM*. I made my first partial confirmation with a quantity of 1,000 L for my Finished Good u2013 this is a confirmation with automatic goods receipt. Then I mistakenly made my Final Confirmation for this order with a quantity of 71,125 L for my Finished Good. I only noticed that my last confirmation was incorrect after the Finished Good in Stock has been depleted already. The 101 movement for the Finished Good that was posted during my final confirmation was not reversed anymore when I canceled my confirmation in CORS. I tried to reverse using a 102 movement type for this order in MB31 however it didnu2019t allow me to proceed and gave me an error said u201Cdeficit of .....in Unrestricted useu201D.
Currently my Process Order has a total Delivered Quantity of 72,125 L which is much greater than the required total order quantity of 68,180 L.
Anybody knows how to reverse this excess confirmed quantity? Your response is much appreciated.
Thanks. Have a wondeful day!
RockzHi Rockz,
You mean you made Good Receipt (confirmation) excess 3,945L .
Right now, you want to cancel only 3,945L.
As you said, FG already depleted.
If have no quantity in unrestricted Use, how can we make good movement(102) (because error:u201Cdeficit of .....in Unrestricted useu201D occur when you do TCode MB31 for 102)
If you want to cancel 3,945L, first, you must reverse that Batch of FG 3,945L to Unrestricted use (MMBE to check stock), then you use the TCode MB31 with movement 102 for reverse FG excess, if this finish, quantity in delivery of Process Order will be subtract 3,945L.
(reverse that Batch of FG 3,945L to Unrestricted use ,mean is the Batch of FG which you depleted for somethings like fill to bottle....)
Regard,
DiepNguyen. -
Inspection lot closed &stock posting done - Reversal of GR -Process order
Dear Friends,
I have a scenario
where inspection type 4 , Final GR for process order
Inspection lot created , stock posting done from QI stock to Unrestricted
now the user wants to reconcile the process order , Meaning he wants to reverse the GR Qty
may be partial or fully
Is it possible , to reverse the GR after stock posting via Quality
and can i reverse my UD , meaning i reverse back UD
Did any one face this scenario
Thanks & Regards
RajHi Raj,
Pls refer the links care fully. Your issue will resolve surely.
[Link -1 |Re: UD reversal]
[Link -2 |Re: 322 after UD]
[Link -3|reversal of ud]
[Link -4|Reversal of UD?]
[Link -5 Along with OSS note Num :- 175842 summary|PP - QM: Reversal of the usage decision;
The solution is well explained in OSS Note
Note 1108313 - Cancelling usage decision and lot
175842 - Inspection lot: Reversal of goods movements from UD
33924
Regards,
Shyamal -
Process order confirmation reversal
HI friends,
I am cancelling a process order confirmation using T-code CORS. The confirmation cancellation is happening, but the goods movements are not reversed. Help in resolving will be much appreciated.
Thanks in advance.
Warm regards
VivekHi All,
Sorry for the delay in response and thanks for your suggestions.
The backflushing is activated. I checked in COGI transaction for the concerned order. I got several entries with different error text. The error text is as follows
"You have no authorization for this transaction with movement type 102"
"You have no authorization for this transaction in plant XXXX"
"Deficit of SL Unrestricted-use 6,957 TO : 1030604 XXXX PL01"
Please let me know how to resolve these errors.
Warm Regards
Vivek -
Quantity Reversal and Process Order Cancellation
Dear SAPians,
I have a problem in Cancellation of Process order after doing the reversal of Quantity after UD thru following steps :-
1.Assign Inspection Type u201808u2019 in the Material master thru T-Code u2018MM02u2019 & Save.
2.Go to MB1B & Make Transfer Posting Thru Movt. Type u2018322u2019 and SAVE.
3. Now we tried to cancel the process order but system is displaying an error 'Quantity is Partially posted in UD' and we are unable to cancel the process order
Please Help
Thanks in Advance.Hi
Reversal of Ud is not possible in normal way as per std SAP.
either you have to implement User exit for the same ( avaialable after 4.6 C version)
Or do as follows:
Go to MIGO
selct GR for order & input your ordernumber in the field .
select Mov.type 102 & slect unrestristed stock in where tab.
Then check & save the transaction.
Then Qty will be revrsed.
Then you can do Process order cancellation.what ever you want.
Pl. try.
Regards
YMREDDY
Maybe you are looking for
-
Import Data in Purchase Order for Intrastat Reporting
Dear Gurus, Technical Scenario: Extended Classic SRM Server: 5.5 Backend:R/3: 4.6C For PO created for cross border purchasing, ( vendor country different from receiving plant country ) the PO when replicated to backend system, DOES NOT HAVE IMPORT T
-
Add ability to use raw data in the Histogram and clipping indicators
I have posted this as an ACR and Lightroom Feature Request at the Photoshop Family site. http://feedback.photoshop.com/photoshop_family/topics/raw_data_histogram_display_lightroom _and_adobe_camera_raw?rfm=1 It was suggested I also post it here to fo
-
I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.
-
Oracle Application Report Server Installation
Dears, I am new to Oracle AS, i need to know how to do the full installation of Oracle Application Report Server. Please, it will be highly appreciated if you provided me detailed Document for this. Please, i need also exactly where can i edit the Or
-
How to use spotlight to find and reveal files in the finder
Hello, Spotlight in Yosemite gives you the opportunity to reveal all files in the Finder (show all files in Finder) but can it reveal in finder just the want you want? We could that with Maverick, using command. Command now seems shows you only wher