REGARDING PROCESS ORDER CREATION

Hi All,
While creating the process order for material, system showing the message that "Manual process order cannot be created for this product". But if we try with another user id, i could able to create the order for the same material.
Plz suggest the solution to get rid of this error.
Thanks
Arvind S

Hi,
The message "Manual process order cannot be created for this product" clearly indicates that the user is not authorized for Manual process order creation by COR1 transaction for this material and may be this material is planned through MRP or SOP etc. and in critical or certain situations manual process order creation is allowed to another user/user id for the same material ( type of materials/material code).
Some time organizations put such restrictions through enhancements. You can search the exact reason or logic of restriction by the help of ABAP consultant.
Regads,
Narresh

Similar Messages

  • Problem in process order creation.

    Dear Sir/ Madam
                             i am facing a problem while process order creation.
    the problem is:
    Error when calculating cost for order ATFEDEC11  "see log Log is deleted when saving
    Do you still want to save?"

    Hi,
    The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
    Hope that helps...
    Regards,
    Declan

  • External Number gneration for process order creation

    Hi,
       I need to generate external number range for process order creation and at the time of goods receipt.
       How can I do this in the include ZXVBZU02.
    Regards
    SAi

    You might want to try search first:
    http://www.google.com/search?hl=en&source=hp&q=externalnumberrangeforprocessordersite%3Asap.com

  • TCODE for Process order creation against Sales order

    Hi gurus,
    Pls tell me what is the TCODE for Process order creation against Sales order
    Eg. CO07 is for production order from sales orde

    Typically, in MTO scenario after the sales order is created you run MRP which will create planned order and then you convert that into production order using MD04.
    Or if you have SD settings correctly directly from the release of Sales Order it will create planned order or production order.
    please check and revert back.

  • Automatic Reservation at the time of process order creation

    Hi Experts,
    As you are aware, when we create a process order and save, system automatically generates the reservation and the reservation will be for movement type 261. My requirement is like this. When system creates reservation, system should consider for which order type the process order is created and create a reservation for other movement type also.
    For eg. Iam having order type ZRRW. When system creates reservation at the time of order creation, system should check the order type and reservation should be created for a movement type Z11 instead of 261 in the normal case.
    Is there any user exit for the same. Please let me know.
    Else how can I post the goods issue with a movement type other than 261. MIGO is not accepting other movement types.
    Anticipating your reply
    Regards
    Prathib

    Hi Ayethebing,
    Thanks for the reply. we created the new movement types inorder to use the SAP standard reports and get the different types of goods movements based on the different processes.
    We can do the goods issue using the custom movement type through MB1A. But I was trying to use in MIGO and this is where system wont allow this.
    In MIGO, system will do the goods issue based on reservation only. The reservation is created at the time of order creation and it uses movement type 261 irrespective of the order type.
    I was trying to find out whether any option is there to use custom movement type to create reservation so that system would propose this movement type in MIGO for goods issue against process order.
    This is an interesting case but unfortunately dont have any option of user exit or Badi. Only one user exit related to reservation is to change the str loc and back flush indicator.
    @Sabine: Thanks for your reply. But the BADI that you provided wont serve the purpose.
    Thanks
    Prathib

  • At the time of Process order creation Batch determination

    Dear All,
    When i am creating process order at the time system not allowing me to execute batch determaination after release only it is allowing me to do.
    My requirement is At the time of order creation i want assign batches ( Execute Batch Detrmination)for the material.
    how to do this one, kindly hel me
    Regards,
    s.sakthivel

    Hi sakthivel 
    Go to OPKP (Production scheduling profile)  txn code and select in Batch management tab Automatic Batch creation at order creation (1) and check this profile is assigned to material in work scheduling view
    Regards

  • Process Order Creation without Standard Cost

    Hello All,
    I need a functionality.. If standard cost is not released for a period , system should not allow me to create a process order in the certain period.
    Is any standard configurations allow me to achieve this????
    Thanks & regards
    Mahesh
    Message was edited by:
            Maheshbabu M G

    Mahesh,
    Standard SAP allows creation of order without Std cost estimate. Only in REM you could make it give error.
    However I suggest you could implement the exit PPCO0006.
    In this the function module EXIT_SAPLCOZF_003 contains the import parameter CAUFVD_IMP which has material number (MATNR) and plant (WERKS). Pass these to table MBEW and get the value of STPRS (std cost). If this value is 0 then give the error.
    Hope this is useful....if so reward points and close this thread.
    Regards
    Ram

  • Availability check during process order creation

    Hi all,
    can anyone tell me significance of availability check during creation /change of process order?? ( in terms of business)
    how is the usual processs?

    Hi,
    Availability check for a material is carried out only if the material is
    1. A stock item
    2. Not a phantom item
    3. Not a bulk material.
    This can be carried out
    1. during order creation
    2. during order release
    3. when a created order is saved
    Availability check can be triggered either manually or automatically.
    For this we need to define in checking control(opjk)
    First define a checking group(ovz2) and checking rule and this
    must be assigned to checking scope.(opjj)
    In the checking scope(opjj) we should define
    1. which Mrp elements are to be considered during check
    2. which inventory categories are to be taken into account
    3. whether Replinishment lead time is to be taken into account or not
    4. whether check is also to be carried at storage location level.
    This checking rule must be linked to checking control(opjk)in which you can say
    1.No availability check for the material
    2.Availability check when saving the order
    3.What type of check is to be carried
    whether ATP CHECK or Check against PIR quantities
    4. Whether order should be released or not if there is
    any missing parts.
    The checking group is assigned to material master MRP3 view.Please check whether checking gorup is assigned to all the components in the BOM.
    Regards,
    nandha

  • Error in Process Order Creation

    Hi Experts,
    I am facing a problem while creating a process Order in COR1
    I have got an error reading Master Data which is
    No task list for select.ID 04 for auto. task list selection found
    Please Help me out.
    Thanking You In advance.

    Dear Ashish,
    1.Check if a master recipe exists for the material in C203 and if exists means check the usage and status of the master recipe.
    that is value for status as 4 - Released General and usage - 1 - production .
    2.If no master recipe exists means then create one using T.Code C201.
    3.Then check the impact in COR1.
    Regards
    Mangalraj.S

  • Process order creation problem

    I am creating a process order . while creating the process order system is throwing error as Auto batch numbering not set up for material type XXXX in plant xxxx . System is not allowing to create process order.
    How to resolve the issue.

    Check in CORW   and switch off batch creation  to isolate the problem if needed.   Also see whether you have any batch managed compoents   for which you have set master data for automatic batch determination.
    There is no setting for material types and plant for batch.  May be the error message is not correct.  What is the message number?

  • Problem during Process Order creation

    Hi,
    I have problem while creating Process Order.
    I have maintained all the basic data required to create the process order.
    When I Release the order, I am able to create the control recipe also, but PI sheet is not generated along with it. System gives the message "No PI maintained in customising for CRD for which control recipe is to be generated "
    If I maintain the same, then system is unable to create the control recipe.
    What may be the problem here? What i can do to rectify this situation?
    Pavan

    Hi Pavan,
    1. Maintain PI in SPRO of process management
    2. Assign this PI to one of phse in master recipe
    3. Plz check wheather ur created Control receipe destination or not.
    4. if not then maitain the same in Spro.
    5.Check the ordre type dependent parameter i.e COR4 from SPRO
    see the Control recipe gerated in REL phse else maintai the asme in production scheduling profile.
    if possible plz send the sctren shot fir the same to
    [email protected]
    Regards
    Siddhesh

  • Process order creation with out BOM

    Hi
    I have an requirement...
    material A is finished good
    i create process order for material A
    but i dont use BOM... with out BOM can i create process order .
    after creating process order cani isuue components against  order ? is it possible please can any one help me in this issue
    but one condition : i craet process order material A 10 KG
    for this FG i used components  materia A used 8 kg  and material B used 2 kg
    is it possibel pls..could any one gude me in this issue
    Regards
    Sesi

    material A is finished good
    i create process order for material A
    but i dont use BOM... with out BOM can i create process order .
    yes, You can create a orderwith out BOM
    after creating process order cani isuue components against  order ? is it possible please can any one help me in this issue
    Yes, You can assign component  manually in component overview screen  or you can issue material directly for order with 261 movement, It will go to unplanned consumption
    but one condition : i craet process order material A 10 KG*
    for this FG i used components  materia A used 8 kg  and material B used 2 kg
    In The component overview screen of process order  assign the Material A with 8 kg ,
    & material B as 2 KG
    Regards,
    Sundaresan
    Edited by: Sundaresan . E. V on Oct 4, 2010 2:41 PM

  • Process order creation

    Hi Experts,
    I want to create Process Order for the Rebars(FG for steel)
    25 mm Rebar is produced from the Billets(Raw mat for Rebar)
    cast no     No of Billets    Ton(Rebar)    %C   %mn    CEv
    1F3233          64            102              .2        .68     .35   
    Cast no       1F3233 is derived  from  3Casts= 64 billets
    cast no     No of Billets      %C   %mn    CEv
    22120        21                   .2        .69     .355
    cast no     No of Billets       
    22121        34                    .2        .69     .358
    cast no     No of Billets   
    22125       9                       .2        .65     .345
    How to create the Process Order ?
    Should i create One Process order per cast no 1F3233
    or 3 Process Orders for each Cast
    How to apply the Original Batch Concept ?
    Regards,
    Rajanikanth L
    +009716788398

    Hi,
    You must have created the Original Batchs for your different casts..
    Now using of combined Order may be an option..
    Please explore in this direction.
    Regards,
    Siva

  • Basic and scheduling  dates & time calculation in process order creation

    Hi guru's,
    i have one requirement, i need to calculate and display the basic and scheduled dates & times based on the given input i.e material , plant , process order type , quantity , UOM and scheduling type ( for corresponding scheduling type user will provide either start date or finish date ) using RFC. can  u plz provide any function module for this purpose or logic for calculating the same  , as i am working on version 4.7ee .
    Awaiting for a quick response.
    Regards,
    Madan

    Dear Rohan,
    1.Check the length of break timings defined in the resource that is assigned in the phase.
    2.Check in OPUZ whether for the process order type and plant combination whether scheduling is to include the break time also
    (whether the check box for scheduling with breaks) is included.
    Check and revert back.
    Regards
    Mangalraj.S

  • BAPI for Process order creation (COR1)

    Hi All,
    Can any please help me to find a BAPI for creating a process order which is done normally by transaction code u201CCOR1u201D.
    Thanks in advance.
    Kind Regards,
    Abhi.

    Try this BAPI - BAPI_PROCORD_CREATE.
    there are many BAPIs in Fuinction group 0001_BAPI realted with Process Order
    Thanks,
    rajinikanth G

Maybe you are looking for