Process order SLOC maintenance error message

Good Day SAP expert!
Previously when we were in SAP4.5, when an SLOC is manually assigned to a component inside the process order, we get a warning message if the material is not yet maintained in the SLOC.
In ECC, we get an error message that the SLOC is not found for a certain material. Can this message be configured to give only warning instead of error?
Thanks!

Hi,
Thanks for the reply. Where is the config you have mentioned?
In response to other advise to enter the material-SLOC in MMSC, we do know this setup but would like to avoid it since once you move inventory in a specific location, the SLOC view would automatically be created thus no need for MMSC initially for new materials. We would like to have the previous warning message only so that user can proceed manual assignment in Process order instead of getting error.

Similar Messages

HT5052 hi , i cant update mi ipod touch software, a soon as the download process in finished an error message appears

hi , i cant update mi ipod touch software, a soon as the download process in finished an error message appears :" session time has expired" something like that

Disabling the computer's security software during the download and update usually resolves a network timeout error.

I had a problem installing icloud on windows 8.1. What should I do? At the end of the installation process there is a error message.

I had a problem installing icloud on windows 8.1. At the end of the installation process there is a error message.What should I do?

I'm guessing that you have checked and complied with the system requirements?
System Requirements
Microsoft Windows 7 or 8
Microsoft Outlook 2007 or later or an up-to-date browser (for Mail, Contacts, Calendars)
Internet Explorer 9 or later, Firefox 22 or later, or Google Chrome 28 or later (for Bookmarks)
Broadband Internet access
Note: If you are upgrading from iCloud Control Panel 1.1 or earlier, you will need to sign out of iCloud Control Panel and uninstall it before downloading iCloud Control Panel 3.1

Unable to confirm transfer order due to error message "enter a storage unit

Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

SRM 7.0 Process-Controlled (BRF) Workflow -- Error message to Shopping Cart

I am modifying a BRF Expression used to calculate approval levels. During this calculation, I may run into error conditions (e.g. Currency tranlsation not found) that I want to display to the user (in the Shopping Cart).
I have tried raising the following exceptions:
/sapsrm/CX_WF_RULE_ERROR.
/sapsrm/CX_WF_RULE_ABORT.
Raising these exceptions do result in SLG1 log entries being written, but the User is not informed of the error (ie. at top of shopping cart where other messages display).
I can probably jump out of the Webdynrpo to read logs, but thought there MUST be some standard way of passing error conditions from the BRF, back to WF, and then back to the Webdynpro Window.
Anybody raise error messages back to the online user from Process-Controlled Workflow?
Thanks,
- Tim

>
Saravanan Dharmaraj wrote:
> Hi Tim,
>
> I am not sure about your business requirement, but if you want to display custom error message while user create a SC, SAP has provided a standard BADI - BBP_DOC_CHECK_BADI. You can implement this Badi to raise a custom error,warning message. You can build your brf logic in the BADI implementation..
>
>
> Best Regards,
> Saravanan Dharmaraj.
Hi Saravanan,
I am actually modifying the Approval Limit Checks (for multi-currency translations) that you recently coded in Maryland. It can occur that errors occur in determining limits (new Currency translation I just added), or during the lookup of agents (ie user config is inconsistent).
In these cases, I can make the shopping cart Dump, by raising untrapped error messages, or assertions. However, I would like to raise exceptions that get trapped (such as the ones I identified in original post), and then make their way to the shopping cart.
Unless I am missing something, I don't think the WF BADIs, or BRF are gonna communicate errors back to the shopping cart, even though these components are called during cart creation and checks.
I realize that I can recode the Agent Determination BADIs, BRF calls, or even read BRF logs within BBP_DOC_CHECK_BADI. I mentioned this in my original posting as well.
Anyway, any help is appreciated.
Thanks,
- Tim

I am trying to install iTunes. In the midst of the installing process, I get this error message: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

I am the only user for my computer, and consequently the administrator. If I go to Control Panel > Administrative Tools > Services and try to manually start the service, I immediately get the following error message: "Windows could not start the Apple Mobile Device service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." I have tried following the steps advised by others online who also have received this message, but to no avail.
On the Apple error message, I have three options: Abort, Retry, or Ignore. Abort, obviously, causes the installation process to cease. Retry brings up the same message again. Ignore causes the installation to finish, but then I receive this message: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)."

Go into Programs and Features
Uninstall:
iTunes
Bonjour*
Apple Software Update
Apple Application Support
Quicktime*
iCloud*
Apple Mobile Device Support
* I didn't have to uninstall Bonjour, iCloud or Quicktime to fix my issue but it won't hurt anything to uninstall them.
Reboot. Download a fresh copy of iTunes. Right click on the exe file and select Run as Administrator if you have the option if not just Run it. Should fix the issue.

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Rework purchase order - serial number error message

We created a sub-contracting purchase order for re-work so we are issuing same material and receiving same material. The corresponding material is serial managed. So we will issue the same serial number and we will recieve the same serial number in this scenario. While doing GR we are getting an error message by saying that we can't receive the same serial number for the given material. If any one come across this scenario please let me know the solution
Thannks in advance

Hi
This is an issue in ECC5.0. you can not receive the same serial number on rework purchase order if you have already executed a 541 movement on same serial number. You need to change the serial number status to receive it again into system.
Try to change the serial number status from ESTO to AVLB in IQ02, if system doesn't allow to change the serial number status, you need to switch the serial number profile to a different one which will allow you to change the serial number status in IQ02.
once you change the serial number status to AVLB, system will allow you to recieve the serial number
Thanks

TS3297 Hi I was down loading IOS 6 to my iPhone through I tunes got as far as processing file and the error message of error 5000 came up and said I would loose everything off my iPhone if I proceeded. I managed to down load for iPad fine. I have an iPhon

Just a beginner here first log in. Question is what do I do if I get an error message 5000 iF you progress you loose every thing - was trying to download IOS 6 onto my iPhone 4 and got to the very end when it ways processing file. Thank you

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Post-processing ends with the error message

Hi
when i try to run a report, i am getting the below error.
Beginning post-processing of request 5947956 on node RWS60160REMS at 15-MAR-2012 04:13:48.
Post-processing of request 5947956 failed at 15-MAR-2012 04:13:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
i check the OPP and the error stack is:
[3/15/12 4:13:51 AM] [2103265:RT5947956] Output file was found but is zero sized - Deleted
[3/15/12 4:13:51 AM] [UNEXPECTED] [2103265:RT5947956] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:677)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:425)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:244)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:6032)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
The error is : Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.
Need help on this issue.
Thanks

Please post the details of the application release, database version and OS.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.Please create a new template and check then. Also, bounce the OPP.
Thanks,
Hussein

How to get order's detail error message

Now, when I check order with t-code: crmd_order.
I can see error in GUI :Item 10 Pricing error: Mandatory condition missing.
But how can I get the message with FM or other code?

Hi Ping su,
Check the function group 'CRM_MESSAGES' you will get bunch of function modules which deals with messages. In my scenario I had to look for a message in order lineitem and if that error message is present in the order I had to take further action. Here is what I did :
DATA:ls_bal_s_msgidno TYPE bal_s_idno,
       lt_bal_r_msgidno1 TYPE bal_r_idno,
       lt_bal_r_msgidno2 TYPE bal_r_idno,
       lt_msg_handle     TYPE bal_t_msgh.
ls_bal_s_msgidno-sign = 'I'.
ls_bal_s_msgidno-option = 'EQ'.
ls_bal_s_msgidno-low-msgid = 'ZMESSAGES'.
ls_bal_s_msgidno-low-msgno = 002.
APPEND ls_bal_s_msgidno TO lt_bal_r_msgidno2.
LOOP AT lt_orderadm_i INTO ls_orderadm_i.
*   Check if the message is available in the log.
    REFRESH: lt_msg_handle.
    CALL FUNCTION 'CRM_MESSAGES_SEARCH'
      EXPORTING
        it_r_msgidno = lt_bal_r_msgidno1
        iv_ref_object = ls_orderadm_i-guid
      IMPORTING
        et_msg_handle = lt_msg_handle.
    IF lt_msg_handle IS NOT INITIAL.
      lv_flag = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
Hope this will give you some idea to handle your scenario.
Thanks,
Vikash.

Getting "process android.process.acore has stopped" error message on S4 at startup.

OTA upgrade to Kitkat was successful, however, i now have the error message "unfortunately the process android.process.acore has stopped" at startup. cant make or receive phone calls, also cannot access apps due to error message being constantly displayed.

Verizon gave a solution above in an earlier thread. So there is guidance much as it is.
You have researched this issue and yet admitting not just on Verizon but other carriers as well you then feel hesitant to renew and get a device from Verizon. That "Bug" was done to all providers.
I always look to the Android Forums or XDA to see if solutions or fixes have been listed. I like to also Google it and many times the solutions are found.
Verizon tech support on the phone may have an answer 1-800-922-0204 or *611 from your mobile device. Verizon will only give you what they have as a possible solution on their database.
Good Luck

Error on outbound processing (- to IDoc), nodetailed error message

Hi guys!
I'm facing a problem with sending IDocs to R/3. My messages have red flag in outbound status, but there is no detailed error message. Everything seems to be ok, but my IDoc doesn't arrive to R/3 and there is that red flag in XI.
What could cause this? It seems like there is some communication problem. Any ideas?
Thank you,
Olian

Hi,
IT will give the status number,what is the status number in IDOC check it and update the thread.
if u find its a data problem u can debugg the FM,go to WE19 and give ur IDOC number and there u will find the option start out bound processing form this opion u can debugg the code and know wat is the error.
Check ur ALE settings.
STEP 1:ALE SETTINGS TO POST IDOC OUT OF SAP R/3
We need to do the following settings in XI
1) Create an RFC Destination to the Sending System in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client
d) Enter the RFC Destination created in SAP R/3 towards other system
e) Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
SETTINGS IN SAP R/3
We need to do the following settings in R/3
Logon to Sap R/3 System
1) Create an RFC Destination to XI in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both must be succesful
2) Create communication Port for Idoc processing Using Transaction(We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile with Outbound Parameters (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang
Then Save
e) Select Partner no. and LS which were create above
f) Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter
g) Select Message type
h) Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type
I) save
4) In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
and then assign logical systems
b) Double click on Define the logical systems
c) Give data for your Logicaal System and Name
d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e) Assign the logical system name to the client
5) Create Customer Distribution model in the transaction code BD64
1) Click on the Create modal View button and enter the short text, Technical name etc as shown below
2) Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type
3) Save the Distribution model
Generate Partner Profiles
Click on Menu Item Generate Partner Profiles
It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute
Then, you will be intimated about the partners, port creation, and outbound parameters creation
4) Distribute Customer Distribution Model
In the menu item GO to Edit->Modal View-> Distribute to the destination client
Popup window appears ,press Enter
You will be intimated about the the Modal View Distributed
Regards,
Phani
Reward points if Helpful

Can't order photos! ERROR MESSAGE: Your account information has changed.

I can't order prints from iPhoto. It keeps saying...
*Your account information has been changed.*
Please review your billing information and approve it.
What is wrong? What do they expect me to "review" that I haven't reviewed already? I've checked EVERYTHING on my account at least 10 times either through apple's website, iTunes app, and iPhoto app. Everything is 100% accurate on my account -- address, credit card number, verification code, EVERYTHING.
I've logged out of my account, flushed the browser cache, restarted my Mac, and done everything over again. I can't even find a working solution to this problem anywhere on this site nor even Google! VERY FRUSTRATED HERE.

Well, it's the stupidest thing! Why they can't give an error message that's meaningful is beyond me because I'd be hard-pressed to say that I'm the only one that's had this problem.
From iPhoto, you must click the Account Info button and sign in to your account.
Then you MUST edit your Billing Information. <-that is the stupid part.
It does not matter if you've edited and double-checked your info on Apple's website. iPhoto turns your credit card number into a bunch of XX's and deletes the security code so that pretty much defeats the purpose of Apple "storing" your credit card info for easy ordering. You must re-enter all your info through iPhoto before it lets you place an order. Ridiculous!

Process order SLOC maintenance error message

Similar Messages

Maybe you are looking for