Process to access BI system
Hi folks
I am starting the task of finding a process by which endusers can submit a request to access BW box as only reporting users( only can run queries). I will be truly greatful if you can share with me your ideas about how you went about doing it or how is done at your companies. First what information the user( new or existing)/requestor needs to put in his/her request form to make the request meaningfull to the SAP security admin who will process this request.?? Second, what are the approval layers for this request?? what are the software used as the "Vehicle" for submitting the authorisations request.
kind regards
massoud
Massoud,
First what is your medium for running queries - is it portal or BeX or both.
You should have a look at SAP's licensing with ESS and Professional licenses and accrosingly take a view on the type of accesses you are going to provide.
What you are asking for is the user creation process and depending on where and how the user ID is created in the system , accesses vary. Not sure if any tools are used but Virsa is one tool that is commonly used to restrict access to the system by way of sensitive TCodes etc. Other than that it is quite standard , by way of the user creation process.
Arun
Moving you post to the BI section
Similar Messages
-
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I am trying to move a file from a folder to another folder.
here is my code:
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Test Pictures");
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Test Test";
File.Move(folderContentNames[1], destinationFile);
updateListBoxFileName();
updateImageBox();
each time I hit the bolded underlined part I get that error message.
if you need anything else just ask.
Thanks in advance,
Thor OrbHi Thor,
If you want to move a file from a folder to another folder, I think you could get the sourcePath and TargetPath. The code below shows a simple demo:
string[] folders = Directory.GetFiles(@"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test");
string desFile =Path.Combine( @"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test - Copy\"+Path.GetFileName(folders[1]));
File.Move(folders[1], desFile);
In addition, the link below might be useful to you:
# How to: Copy, Delete, and Move Files and Folders (C# Programming Guide)
>> The process cannot access the file because it is being used by another process
The message seemed that the file was opened in other process. Did you operate the file with other code?
I think you could check if the files and the folders were opened, and review your codes if they were used in other places.
If you have any further questions, please feel free to post in this forum.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
Ya, Thanks I figured about the path and destation. yes I am using the file in another area, the file is an image jpg and I am displaying it in a picture box. Now I have been doing a little research I see a command called Dispose() and this is suppose to
release the handle on the image, but I can seem to figure out have to use it correctly.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Collections;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.IO;
namespace Scanned_Picture_Ogranizer
public partial class Form1 : Form
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Scan Project Testing\Test Pictures", "*.jpg");
//List<string> folderContentList = folderContentNames.ToList();
private List<string> folderContentList = new List<string>();
Bitmap currentImage;
Bitmap placeHolder;
public Form1()
InitializeComponent();
convertingArrayToList();
startUpData();
string sourceFile = @"C:\Users\Jonah\OneDrive\My Programming Projects\Scanned Picture Organizer Project\Test Pictures";
string destinationFile = "";
private void moveButton_Click(object sender, EventArgs e)
private void startUpData()
//placeHolder = new Bitmap(folderContentList[0]);
//currentImage = (Bitmap)placeHolder.Clone();
// Image loadImage = new Bitmap(pictureClones[0]);
// currentFilePictureBox.Image = loadImage;
int numberOfFilesLeft = folderContentNames.Length;
foreach (string name in folderContentNames)
fileNamesListBox.Items.Add(name);
fileNameTextBox.Text = folderContentNames[0];
numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
///loadImage.Dispose();
//FileStream currentImage = new FileStream(folderContentList[0], FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
private void convertingArrayToList()
foreach (string listName in folderContentNames)
folderContentList.Add(listName);
private void selectingImageFromListBox()
private void updateImageBox()
Bitmap currentImage = new Bitmap(folderContentList[0]);
currentFilePictureBox.Image = currentImage;
currentImage.Dispose();
private void updateListBoxFileName()
fileNamesListBox.Items.RemoveAt(0);
fileNameTextBox.Text = folderContentList[0];
// numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Scan Project Testing\Test Test\";
File.Move(folderContentList[0], destinationFile + System.IO.Path.GetFileName(folderContentList[0]));
folderContentList.RemoveAt(0);
updateImageBox();
updateListBoxFileName();
when I first start the program the first picture displays, but when I trigger historyPictureBox_Click(), it does that error again. Another things is that I already looked at that link and it didn't help.
I just super confused, I would like your help on this.
Thanks,
Thor Orb -
Hey,
I have a powershell script where I first use Get-childitem to receive a number of files.
Then I do some stuff with it and try to move the file afterwards.
Unfortunately if I am using a lot of files I receive very often the error:
The process cannot access the file because it is being used by another process.
Even -Force parameter does not help further.
Based on my look around it is not used by another process.
I think it is still 'in use' by powershell from script commands previously.
Is there any way to 'see' if the file is still in use currently and wait for this to end?
Or can I 'close' the current usage of the file?
Thank you :)Hey,
Thank you.
I build the following function.
But either the $return = $true I receive "The process cannot access the file because it is being used by another process." when I try to move-item... :(
Function Wait-FileUnlock($FilePath){
Write-Host " "
$FileInfo = New-Object System.IO.FileInfo $($FilePath)
DO{
try{
$fileStream = $fileInfo.Open([System.IO.FileMode]::Open, [System.IO.FileAccess]::Read, [System.IO.FileShare]::Read)
$return = $true
catch{
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
$return = $false
While($return -ne $true)
$Error
return $return
Another functions is:
Function Wait-FileUnlock($FilePath){
Write-Host " "
DO{
$Error.Clear()
Rename-Item $FilePath $FilePath -ErrorAction SilentlyContinue | Out-Null
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
While($Error.Count -ne 0)
This one waits .. but it seems not to end waiting at any time :( -
The process cannot access the file during Crystal Report export
We are exporting crystal reports into PDF using ExportToHttpResponse (code snippet below)
// Getting the type of the report file which has been selected by the user. (which will be REPORT CLASS type)
Type objType = Type.GetType("WebApplication1.Reports." + ReportName);
ReportClass SEPREport = (ReportClass)Activator.CreateInstance(objType);
// GetTypedDataSet()returns an instance of typed data set.
SEPREport.SetDataSource(GetTypedDataSet());
SEPREport.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, true, ReportName );
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0.
Now on our machines, we have never experienced any issues.
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
The process cannot access the file because it is being used by another process. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The process cannot access the file because it is being used by another process.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): The process cannot access the file because it is being used by another process.
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +525
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +681
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) +105
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName) +163
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName) +132
MSSB.FATools.UI.PlannerReport.CreatePDFDocument() +732
MSSB.FATools.UI.PlannerReport.btnCreatePDF_Click(Object sender, EventArgs e) +45
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +104
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5615This is a cross post:
The process cannot access the file because it is being used by another proc
Do not cross post. See the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]
Setting this tread as answered and locking.
- Ludek -
The process cannot access the file because it is being used by another proc
We are exporting crystal reports into PDF using ExportToHttpResponse (code snippet below)
// Getting the type of the report file which has been selected by the user. (which will be REPORT CLASS type)
Type objType = Type.GetType("WebApplication1.Reports." + ReportName);
ReportClass SEPREport = (ReportClass)Activator.CreateInstance(objType);
// GetTypedDataSet()returns an instance of typed data set.
SEPREport.SetDataSource(GetTypedDataSet());
SEPREport.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, true, ReportName );
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0.
Now on our machines, we have never experienced any issues.
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
The process cannot access the file because it is being used by another process. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The process cannot access the file because it is being used by another process.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): The process cannot access the file because it is being used by another process.
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +525
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +681
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) +105
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName) +163
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName) +132
MSSB.FATools.UI.PlannerReport.CreatePDFDocument() +732
MSSB.FATools.UI.PlannerReport.btnCreatePDF_Click(Object sender, EventArgs e) +45
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +104
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5615A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
FRM-92220: access to system clipboard is denied
Hi,
Within a customer's application Error FRM-92220 "access to system clipboard is denied" is returned when the customer switches between screens within the application.
I have not been able to find a reference for this error nor am I experienced with Forms.
Can anyone help and give a solution or point into the right direction to help the customer with this error?
Thanks in advance.
PeterAs found in the Internal Support Portal:
Ideally, the error FRM-92220 will be thrown due to the the reason that there is a security check introduced by the JRE in one of their updates/upgrades sometime around JRE 1.5 was released. If the System clipboard is accessed by another OS application, then JRE cannot access the clipboard hence resulting in the error. If no OS application (like word or anyother tool ) then you wont have this error. Avoiding this error is not in the hands of Forms, its a question of whether JRE can access the clipboard at that particular moment
In earlier versions like 9.0.4 and 10.1.2, this new security measure by Sun JRE has resulted in Java exceptions and abrupt termination of the JVM in the client machines resulting in Forms disconnection. Hence Forms development introduced the new applet parameter to capture and re-route the messages to the java console
allowAlertClipboard=true
Setting it to false, will not show these errors and will sent to jre console.
There is very little you can with respect to Forms coding. I would recommend you to set the following
allowAlertClipboard=false
at the moment when the error comes, the forms process will capture and send it to console. Later, if the System clipboard is released by other processed which were holding it, then the clipboard can be accessed again, there is nothing that you need to do specifically. -
Handling process in a remote system
how to list processes,
start processes,
and kill processes in a remote system from a server. and how to get configuration information of a remote system.
Return information regarding: logical memory configuration, physical and logical disk and partition configuration including free-space, processor information, network adapter configuration and information, page file configuration and information, OS information.Write a program that collects the information and sends it to another system. How to get the data: consult your operating system's programming manuals. How to send data through sockets: google for java socket tutorial.
Much of the information you list can be accessed only using non-portable operating system and CPU dependent means. If you write the program in Java you may need to call C, C++, and assembly language code through JNI to gather some of the information. Unless your operating system offers a Java API for that information; most OSs only offer C or C++ APIs. -
Keep getting this message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, cannot view open window or close Firefox. Have to always reboot system to access the internet.
For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].
-
Accessing the system tray, Windows 7
I have Windows 7. I have a program running named SlinCleaner Plus. I have tried to uninstall and have not been able to do so. It seems the program is running continuously in the background. I apparently have to go the system tray
to start the removal process. However, I can not access the system tray. Question ... What should I do?if you are not writing a software, you are on the wrong web site.
Visit answers.microsoft.com if you need help in using Windows.
Visual C++ MVP -
when i click to open firefox it says that "firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." and I've tried to shut down and restart my computer but it keeps showing the same message. I've even uninstalled Firefox and then reinstalled in the hopes that the problem would be solved but it this message is still popping up. What can I do to solve this problem?
== This happened ==
Just once or twice
== I was on facebook trying to upload pictures yesterday. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; InfoPath.1)Do you have a profile lock file in your profile folder? If so, delete it and see if TB runs properly:
http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file -
If I click a link on my desktop or in any other program (while Firefox is open and running), I get this message: "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." There's about a billion links for this if you Google it, but they all say that Firefox wasn't shut down properly. (OK, maybe not ALL of them, but if the needle is in that haystack, I haven't yet found it.) That's not the issue in my case since I haven't shut FF down at all.
== This happened ==
Every time Firefox opened
== IDKThis began to happen to me when I tried to run two separate profiles simultaneously on the same installation of firefox with -no-remote
-
Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.
-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working. -
somehow i couldn't get rid of one website called www.searchqu.com/405 set as my homepage... I tried all solutions given to change the homepage but whenever i restarted firefox that homepage used to come automatically.. So, I deleted the profile (even from recycle bin!!) and deleted the firefox and downloaded it again hoping to get my problems fixed (which didn't happen!) because i'm getting dialog box saying- Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.
You don't say which operating system you have installed?
Assuming it's Windows, right click a blank part of the Windows Taskbar and go to Task Manager. Then click the ''Processes ''tab, find '''firefox.exe''' and then right click it and choose '''End Process'''.
Maybe you are looking for
-
Hi, I am using adobe acrobat 9 professional .I need to add watermarkfrom file to a pdf document by clicking a button on the document which runs the following javascript this.addWatermarkFromFile({ cDIPath: "/C/watermark.pdf", nSourcePage: 1, nEnd:
-
Suggest file name in JFileChooser?
I'm a newbie (student) to both Swing and Java in general. In using JFileChooser, It occurred to me that it would be nice to offer a suggested file name when saving files. For those of you who have used MS Word, when one saves a new file, Word offers
-
How can i add hardware button control
dear sir/madam i am using htc explorer mobile smart phone and port the Firefox OS to my mobile its working fine and not pick upping the network for Sim card always searching for network and home key only working how can i add menu,back and search but
-
How do I return Labview errors from a LV executable when calling from another application?
I'm calling a third party executable under WindowsXP. The program returns an exit code when complete. I tried Sys Exec VI, but the 'return code' field does not seem to grab the exit code. Help.
-
Hi, does anybody knows how to set the size of the push button in the selection screen... Thank you... regards, mae