Processes of databases mixed between ORACLE_HOMES on CRS STANDALONE

Hi,
I have three Databases with different Oracle_HOME (different filesystem) on a CRS STANDALONE 11.2.0.3 (ASM)
/opt/oracle/pka00/soft/bd/bd11.2 (SID: piloasdb)
/opt/oracle/pka01/soft/bd/bd11.2 (SID: pilosec)
/opt/oracle/pka02/soft/bd/bd11.2 (SID: piloref)
1)I start with crsctl command the first DB: crsctl start resource: ora.piloasdb.db
No problem
2) I start with crsctl command the second DB: crsctl start resource: ora.pilosec.db
I can see processes of pilosec DB opened in BOTH ORACLE_HOME (itself O_H and the O_H of piloasdb)
3) I start with crsctl command the third DB: crsctl start resource: ora.piloref.db
I can see processes of piloref DB opened in ALL the ORACLE_HOME (itself O_H and the other two O_H, piloasdb and piloref)
Why this behavior?
I discovered this problem when I want to dismount the filesystem of one DATABASE, I can't do it because the processes of other databases are opened.
Tks very much!
Send in cc: [email protected]
Regards,
David.

Hi,
never use CRSCTL for oracle ressources! It might lead to OCR (or in your case OLR) corruptions.
For Oracle ressources use SRVCTL.
Furthermore you should always take the SRVCTL from the home the DB is running in. This is not so important, when versions are equal, however if one home has a patch, the other not, it might be crucial.
If the same issue exists with SRVCTL of the responding DB Home, then you should open a SR.
If the error only exists when using crsctl then see above ;)
Regards
Sebastian

Similar Messages

How to create database link between oracle and SQL Server

Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,

Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a)     Oracle 10g software
b)     User account to access SQL Server database (sa/abc@123!)
c)     Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4)     Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5)     Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6)     Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM

How to make a simple BPEL-process with database access

I hope somebody can help me.
I want to make a BPEL process that get a message via MEDIATOR. That message has to update a database table.
So far as I know : start in composite with mediator - bpel process and database adaptor.
What have to be done in the bpel process ?
I hope somebody can help me, Thnx, Carel

In a nutshell -
Create a Database Adapter in the composite.xml UI. Drag a wire from BPEL process to that db adapter you just created. Go to BPEL process (double click), use invoke activity after the initial receive activity, and drag a wire to make the connection to the partner link on the right hand side swim lane (which is your DB Adapter).
On doing that, you will be seeing the input/output variables generated in the Invoke Activity (should be of type expected by DB adapter).
Next - drop an assign activity between Receive and Invoke and make the transformations from the "message from the mediator" to this Input Variable (created as part of the invoke activity).
You are good to go!
Regards
Swgt

Is Session Method has Asyn. processing while database update is Sync ?

Hi SAP-ABAP Experts .
Friends , How it is possible that 'Session Method has Asynchronous processing while database update is
Synchronous ' , May u plz eloborate it .
I am thinking if processing is Asynchronous then database update should be Asynchronous .
How it is Synchronous ?
Best Regards : Rajneesh

Hi,
CALL TRANSACTION tcod ... MODE mode
The specified processing mode can accept the following values:
'A' Display screen
'E' Display screen only if an error occurs
'N' No display
If the addition MODE is not specified, the processing mode is set to 'A' .
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
Have a look at below link for details:
Using CALL TRANSACTION USING for Data Transfer
I hope it helps.
Thanks,
Kumar

Database changes between data records of PSA

Hi all,
Does anybody know a way, how to flush or commit database change between processing each data record from PSA by transfer rules?
I have some routines in transfer rules (updating attributes of master data from datasource), where I need values from exactly previously processed data record. But SELECT from /BIC/Q... table gives me no changes of these values
Command of selection is written correctly, because it gives me new values in next run of DTP process.
And little explanation, what I'm trying to achieve:
In PSA I have account, date and value and I need count, how this value changed for a concrete day and store this value to time-dependent attribute of master data. All data records with the same key (duplicate record) overwrite the result of previously one, so only last one is stored in master data.
Shortly, I need something like aggregation ADDING of routine in transfer rule detail, but able to catch duplicate records.
Thank you for any idea.
Regards, Filip

Some note about investigation process.
I tried change my data flow and made the same transfer rules from data source to ODS, if it will behave in different way.
I have found data records correctly collected (agregated) in New data of ODS, but EMPTY in active data! So I think, the something similar happend in case of updating master data, and that's why I didn't saw any agregation.
There is no need to call-out database changes, but this problem is kind od anythink else
This shoud be for a new thread, but how can keyfigures become empty after activation?? I've searched forum and found only a case, when End routines are implemented and they skip update rules, whitch are initial. This is not my case.
Nice to hear from you any ideas. Thankx for reading.
Filip

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

Database replication between Oracle RAC and Oracle Standalone DB

Hi,
We have currently 4 node RAC environment and Oracle RAC implementation with 4 Oracle instances. We want to move the one instance and make it Standalone with Oracle database due to availability issue. Thus we will remain with 3 nodes on the RAC database and one Standalone database. We want to implement Oracle replication on this solution, where partial database of RAC environment needs to be replicated to Standalone node.
We will have Oracle 9i database server for both RAC and Standalone machine.
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?
2. Is it feasible to sychronize around 25GB data between servers?
3. What can be estimated time for refresh or Synchronization?
Thanks in advance for help.

The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.
Please let me know if we need to look for some other methods of replication also.

Database replication between Oracle RAC and Oracle Standalone DB in 9i

Hi,
We have currently 4 node RAC environment and Oracle RAC implementation with 4 Oracle instances. We want to move the one instance and make it Standalone with Oracle database due to availability issue. Thus we will remain with 3 nodes on the RAC database and one Standalone database. We want to implement Oracle replication on this solution, where partial database of RAC environment needs to be replicated to Standalone node.
We will have Oracle 9i database server for both RAC and Standalone machine.
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?
2. Is it feasible to sychronize around 25GB data between servers?
3. What can be estimated time for refresh or Synchronization?
The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.
Please let me know if we need to look for some other methods of replication also.
Thanks in advance for help.

ManojMac wrote:
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?Streams is another option
2. Is it feasible to sychronize around 25GB data between servers?Sure. Depending on the rate of change, your latency requirements, whether the standalone database has the horsepower to apply all the changes generated by to other three nodes, etc.
3. What can be estimated time for refresh or Synchronization?Depends on the architecture, the network connection, whether you are doing incremental refreshes, etc. And it depends on what time you're measuring-- you might be measuring the latency between the RAC cluster and the standalone database, you might be measuring the time it takes to incrementally refresh a single materailized view when there have been no changes, you might be measuring the time it takes to do a complete refresh of an entire refresh group, pulling 25 GB of data over the network.
The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.DataGuard is not an option if you only want to replicate a subset of the data. The two realistic options are materialized views and Streams. Are you anticipating that you will be making changes on both nodes? If not, you can use simple materialized views rather than multi-master replication.
Since 9.2 is not longer covered by Premier Support, are you planning to upgrade to a supported version in the near future? In particular, Streams works a lot better in later versions of the database.
Justin

How to create database link between 2 servers to exports schemas

Could any one please give Steps to create database link between 2 servers (linux) to exports schemas like AR, INV, GL.......etc

Hi Mouni,
As i suggest above, please use the REMAP_SCHEMA parameter, so that you can create those objects which are getting created in the Apps Schema in the XBSI schema, I have already provided the syntax above.
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORDER_LINE_INFO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_SERIAL_NO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ONHAND_BALANCES" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_PURCHASE_ORDERS" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORDER_HEADER_INFO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORGANIZATION_ITEMS" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_PE_FIND_RESULT" already exists
You are facing these errors as you have already done the import, and when you try to re-import it says those objects are already available. If this fresh import, Please drop the the new user you have already created in the Datawarehouse instance, and recreate the User and start a fresh import.
Hope this help!
Thanks &
Best Regards,

How to create database link between oracle9i database and oracle10g

How to create database link between oracle9i database and oracle10g
oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
Please help me on this

For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
Connections between 10.2 and 9.0.1 was never been supported.
Cheers !!!!
Bhupinder

Database link between the databases with the same name

Hi,
I need to establish a db link between two databases that are named the same way on two different servers.
server 1 has a database dev1 and server2 has a database dev1. The tnsnames on server2:
DEV1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV1)
DEV1_server1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev1)
Can anyone let me know a way to create a database link between the two above?
Thanks.

Hi,
Am not sure what problem you are facing in creating a db link
create database link dev1_server1 connect to x identified by x using "dev1_server1"
create database link dev1_server2 connect to x identified by x using "dev1_server2"where dev1_server1 and dev2_server2 are the tns entry in tnsnames.ora file of server2 and server1 respectively.
Regards
Anurag

DBTIMEZONE of 2 databases in same ORACLE_HOME

Hello All,
I have 2 databases in same ORACLE_HOME. When I ran follwoing SQL
SELECT dbtimezone FROM v$database;
For one database I got -8:00 and for another I got -7:00. There is one hour difference in both the offsets. One database was created in December and another is created in June. Do you think the difference is because of the DST. The databases are in California, USA (Pacific Standard Time).
Thanks & Regards,
BB.

This is likely the reason according to the CREATE DATABASE documentation if you did not specify time zone parameter at database creation time:
Oracle Database normalizes all TIMESTAMP WITH LOCAL TIME ZONE data to the time zone of the database when the data is stored on disk. If you do not specify the SET TIME_ZONE clause, then the database uses the operating system time zone of the server. If the operating system time zone is not a valid Oracle Database time zone, then the database time zone defaults to UTC.

Dimensions and Cubes Process OK / database 'Process Full' fails

Hello,
I am having trouble processing SSAS database (SQL 2008R2).
Within BIDS environment I can process all dimensions and two cubes - no problem. But when I try to process the database (Process Full – Sequential/ All in one transaction), I keep getting errors about one specific dimension (however the very same dimension
is processed separately just fine).
Any ideas why this would happen?
Thanks,
Lana

Thanks so much for all your replies! Your help is greatly appreciated
J
Here is the error message I am getting (it is the same for bunch of other attributes of the same dimension called
Item):
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Item', Name of 'Item' was being processed.
Errors in the OLAP storage engine: An error occurred while the 'Product Group' attribute of the 'Item' dimension from the 'InvCube' database was being processed.
OLE DB error: OLE DB or ODBC error: Operation canceled; HY008.
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'dbo_Item', Column: 'Colour', Value: ''. The attribute is 'Colour'.
Keep in mind that the Key for this dimension is called ItemID and there are no duplicates (I checked). Before processing the cube, I have dozens of procedures (within SSIS package that brings the data into DW) that are checking if all the
keys (FK columns on Fact table) exist within dim tables (PK columns). I also do not allow NULLs or blanks for the dim keys within Fact tables, I replace them with
special “DimName-000” Keys that, again, exist within dim tables.
What I am trying to figure out… why I can process Item dimension just fine on its own (I also process all the other dimensions OK), after that I can process both cubes that are using this (and other) dimension(s) … and I can browse the cubes, getting breakdown
by Item / Colour / Product Group, etc... So, everything seems to work perfectly. However, when I try to process the whole database (with all previously processed dimensions and both cubes - there are only two cubes for now, to make is simple), the process
fails, giving me an error about duplicate attribute key for this specific Item dimension.
Any thoughts?
Thanks again!

Database link between oracle and sql server

dear all,
i m a newbie to oracle and i need your help to know how to create a database link between oracle and sql server.my oracle version 10.2.0.3 and platform is redhat linux 5.7.your help appreciated.
thanks in advance.

[oracle@localhost ~]$ rpm -qa | grep -i odbc
php-odbc-4.3.9-3.15
unixODBC-kde-2.2.11-1.RHEL4.1
MyODBC-2.50.39-21.RHEL4.1
postgresql-odbc-7.3-8.RHEL4.1
freeradius-unixODBC-1.0.1-3.RHEL4.3
qt-ODBC-3.3.3-9.3
unixODBC-devel-2.2.11-1.RHEL4.1
unixODBC-2.2.11-1.RHEL4.1
is this showing odbc installed in os?

PLS-00497: cannot mix between single row and multi-row (BULK) in INTO list

Hi,
I have a requirement to send a table data through mail,
so am using execute statement after opening the connection and am using the following PLSQL code, which am failing to execute successfully.
My code goes like this.
    0            10            20           30           40            50
1 CREATE OR REPLACE PROCEDURE SEND_TABLE_DATA( FROMAD IN VARCHAR2,
2   TOAD IN VARCHAR2,
3   SUBJECT IN VARCHAR2,
4   MESSAGE IN VARCHAR2,
5   DOCID IN VARCHAR2,
6   DOCDT IN DATE,
7   PRODOAID IN NUMBER )
8   AS
9   BATCHNO VARCHAR2(32767);
10 PCSBOX NUMBER;
11 AMOUNT NUMBER;
12 SMTPHOST VARCHAR2(255) := 'XXX.XXX.X.XXX' ;
13 A UTL_SMTP.CONNECTION ;
14 BEGIN
15 A :=UTL_SMTP.OPEN_CONNECTION(SMTPHOST,25);
16 UTL_SMTP.HELO(A,SMTPHOST);
17 UTL_SMTP.MAIL(A,FROMAD);
18 UTL_SMTP.RCPT(A,TOAD);
19 UTL_SMTP.OPEN_DATA(A);
20 UTL_SMTP.WRITE_DATA(A, CHR(13) ||CHR(13) || CHR(13) );
21 UTL_SMTP.WRITE_DATA (A,'Date: '|| TO_CHAR(SYSDATE,'DD/MM/YYYY HH24:MI:SS') || CHR(13) );
22 UTL_SMTP.WRITE_DATA(A,'From: '||FROMAD|| CHR(13) );
23 UTL_SMTP.WRITE_DATA(A, 'To: '||TOAD|| CHR(13) );
24 UTL_SMTP.WRITE_DATA(A, 'Subject: '|| SUBJECT || CHR(13) );
25 UTL_SMTP.WRITE_DATA(A,MESSAGE||DOCID||' Documented on '||DOCDT||CHR(13) );
26 UTL_SMTP.WRITE_DATA(A,CHR(13) || CHR(13) || CHR(13) );
27 UTL_SMTP.WRITE_DATA(A,'This is for your information'||CHR(13) );
28 UTL_SMTP.WRITE_DATA (A,' BATCHNO '|| ' -- '||' PCSBOX '||' -- '||' AMOUNT '||CHR(13) );
29 EXECUTE IMMEDIATE
30         'SELECT
31       A.BATCHNO,B.PCSBOX,B.AMOUNT
32        FROM
33      SCHEMA1.TABLEX A,SCHEMA2.TABLEY B
34        WHERE
35       A.BATCHID=B.BATCHNO AND B.PRODOAID='|| PRODOAID
36     BULK COLLECT INTO BATCHNO,PCSBOX,AMOUNT;
37 FOR indx IN 1..BATCHNO.COUNT
38   LOOP
39    UTL_SMTP.WRITE_DATA (A,BATCHNO(indx)|| ' -- '||PCSBOX(indx)||' -- '||AMOUNT(indx)||CHR(13) );
40   END LOOP;
41 UTL_SMTP.WRITE_DATA( A,CHR(13) || CHR(13) || CHR(13) );
42 UTL_SMTP.CLOSE_DATA(A);
43 UTL_SMTP.QUIT(A);
44 EXCEPTION
45 WHEN OTHERS THEN
46 UTL_SMTP.QUIT(A);
47 RAISE;
48 END;
49 /
SELECT * FROM USER_ERRORS
NAME                       TYPE             SEQUENCE    LINE         POSITION        TEXT                                                                                                             ATTRIBUTE                 MESSAGE_NUMBER
SEND_TABLE_DATA
PROCEDURE
3
37
1
PL/SQL: Statement ignored
ERROR
0
SEND_TABLE_DATA
PROCEDURE
2
37
24
PLS-00487: Invalid reference to variable 'BATCHNO'
ERROR
487
SEND_TABLE_DATA
PROCEDURE
1
36
25
PLS-00497: cannot mix between single row and multi-row (BULK) in INTO list
ERROR
497
Thanks In Advance
Regards
Pradeep.

> 29 EXECUTE IMMEDIATE
> 30         'SELECT
> 31       A.BATCHNO,B.PCSBOX,B.AMOUNT
> 32        FROM
> 33      SCHEMA1.TABLEX A,SCHEMA2.TABLEY B
> 34        WHERE
> 35       A.BATCHID=B.BATCHNO AND B.PRODOAID='|| PRODOAID
> 36     BULK COLLECT INTO BATCHNO,PCSBOX,AMOUNT;
The variables BATCHNO, PCSBOX and AMOUNT are defined as scalar variables. Check there definition
> 9   BATCHNO VARCHAR2(32767);
> 10 PCSBOX NUMBER;
> 11 AMOUNT NUMBER;
You cannot use BULK COLLECT on scalar variables. The variables must be defined as a COLLECTION TYPE in order to perform bulk collect.

Processes of databases mixed between ORACLE_HOMES on CRS STANDALONE

Similar Messages

Maybe you are looking for