Processing data from UI

Hey,
I'm writing a small program that takes user input from a client applet and sends it to the server where it is then processed and a response given. I set it up ok processing typed data at the command line but now I want to interpret clicks on UI components in an applet that I have created. How do I write directly to the client's output stream?
For example if a user selects the left hand-side button on my client interface, this would create the sentence "left button clicked" like a protocol and then that sentence is passed to the server. Where upon the server receiving this sentence it is processed in some way. I know how to detect the click but it is the process of getting my client to inform the server of the event that I am struggling with.
Thanks

did you manage to set up a conn?Well when I start the server up it sits and waits for a connection, then I load the client and after the client has launched the listening server does correctly start up a server thread to handle the connection and this is confirmed with some output on the server's console. So it does know there is a connection. As to whether the server receives what I send I don't know, since my very question is how do I send :)
When creating the command line version I had no problem, since the processing of text at the command line is automatically handled. I type something, press enter and the readLine() sees it and breaks the null while loop. However, now I am not typing anything, and I want to know how do I pass data. Can I send my data to an applet equivalent of the command line making it look like I have typed or do I do it some other way?
How do I take care of the http tunelling?

Similar Messages

Good for processing data from a web application?

It seems like all the examples provided for ASA are about processing data streaming in from IoT or mobile apps. Is ASA appropriate for processing data from websites? For example, I have a multi-tenant web API and I need to roll up usage and calculate billing
for my clients. My clients can upload resources with me which I store in blob storage. But blob storage gives me no way of knowing how many resources have been uploaded and how long I have stored them. Would ASA be a good fit for calculating these figures?

I have solved this task in folowing way:
I have add ADF read only form to my page (which I need anyway). The form displays data selected in the graph (using another VO, which is linked to graph VO). Command button calls my managed bean, which handles the data via the bindings executables (view iterators).

TO Get Ensuring Exactly Once Processing data from sender soap adapt

To XI Specialists
Now Im trying to get Ensuring Exactly Once Processing data from sender soap adapteter.
My plan is that send data from Receiver adapter, to Sender adapter by SOAP.
(1st interface is ABAP to Soap "BE", 2nd interface is Soap to File "EO")
Sender SOAP adapter will returun Ensuring Exactly Once Processing data.
(see SAP HELP, http://help.sap.com/saphelp_nw70/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm )
AND I want to get Ensuring Exactly Once Processing data, I want to determine what to do in ABAP proxy.
SO I made and tested 2interface. but error occuered.
I checked the error, and Now I know what is the cause.
The cause is that Ensuring Exactly Once Processing data didnt enter the payload, at Receiver Adapter.
1st interface coulnt get the payload data, so mapping error occuered....
Please give me help,
"How to get Ensuring Exactly Once Processing data From Sender SOAP ADAPTER"
or
"How to enter Ensuring Exactly Once Processing data into Payload of Receiver SOAP ADAPTER"
and more excelent way....
our XI is version7.0 and SP10
Please teach me your wisdom!
Naoki Kurihara

I seeked and I noticed that
maybe I catched the message but the message dont have payload.
so I got no_payload error.
I checked SAP note.
I noticed, no_payload error will be managed to nomal message at SP13....
my XI is SP12....
I ll seek for another way!!
Thank you! noaki

Processing data from a bar graph

Hi,
I use JDeveloper 11.1.1.6.0
My VO contains 6 attributes. Two of them are displayed in a bar graph. I have created ClickListener bean, where I'm able to get X,Y values from selected bar (using methods getValue and getGroupAttributes from DataComponentHandle class).
Is it somehow possible to get also values from the rest 4 attributes, which are not displayed in the graph? I need to process these values programatically in my backing bean.
One way is to make a db query from my backing bean. Is there any other possible solution, without db access, just using data from ClickEvent?
Thanks a lot for ideas.
Daniel

I have solved this task in folowing way:
I have add ADF read only form to my page (which I need anyway). The form displays data selected in the graph (using another VO, which is linked to graph VO). Command button calls my managed bean, which handles the data via the bindings executables (view iterators).

Passing XML in CLOB and processing data from CLOB

Hi All,
I am facing problem when trying to access xml data from CLOB.
My stored procedure is as below:
CREATE OR REPLACE PROCEDURE usp_XMLTEST2
in_XmlDoc IN CLOB
IS
BEGIN
UPDATE XML_TEST
SET SETFLAG='N'
WHERE (ITEMCODE,WAREHOUSE) IN
SELECT
TO_NUMBER(EXTRACT(COLUMN_VALUE,'//Entry/@ItemCode')) ,
TO_NUMBER(EXTRACT(COLUMN_VALUE,'//Entry/@Warehouse'))
FROM TABLE(XMLSEQUENCE( EXTRACT(XMLTYPE(in_XmlDoc), '//List/*' )))
END usp_XMLTEST2;
Exec usp_XMLTEST2('<List Daemon="2"><Entry ItemCode="112333" Warehouse="4101" /><Entry ItemCode="112333" Warehouse="4103" /></List>');
It gives error:
ERROR at line 1:
ORA-22905: cannot access rows from a non-nested table item
ORA-06512: at "PUBLIX.USP_XMLTEST2", line 8
ORA-06512: at line 1
Please devise solution to this problem.
Regards
Nitin Bajaj

Try casting it:
SELECT TO_NUMBER(EXTRACT(COLUMN_VALUE,'//Entry/@ItemCode'))
TO_NUMBER(EXTRACT(COLUMN_VALUE,'//Entry/@Warehouse'))
FROM TABLE(cast( XMLSEQUENCE( EXTRACT(XMLTYPE(in_XmlDoc), '//List/*' )) as XMLSequenceType ) )
Anton

Needs help to process data from a form in php

Hello there,
Under "About us", is the contact us page where I would like
to collect data. But I could not get it processed.
I used but am very new to php. Anyhow, what I want to process
is to send all the data collected to my email address, and at the
same time, to display a simple Thank You page. I am attaching my
code.
I certainly HOPE someone can help me out as I have been
trying for quite a while now and need to get it done ASAP...
Many Thanks,
matt
Text

Hi Sayaf
It sounds like you need to use "Array Subset.vi" to split the 2000000 into 250000 element blocks.
Set the index on Array Subset to 0 and then increment by 250000 after processing and displaying each block.
Good luck
Neil

How to process data from a device similar to eeprom

I got this programm attached. but I want to process the data in the same programm. Thats what I want to do: To compare the number in the second register with a constant. The same with the number in the third register. How can I do that?
Attachments:
Reichw&Verst.vi ‏132 KB

I am not sure if I understood the question correctly, but have a look at the vi (version LV8) or the screenshot. Maybe it gives you an idea how to proceed.
Message Edited by IngoS on 07-03-2006 02:16 PM
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany
Attachments:
compare array.zip ‏136 KB

Use LINQ to extract the data from a file...

Hi,
I have created a Subprocedure CreateEventList
which populates an EventsComboBox
with a current day's events (if any).
I need to store the events in a generic List communityEvents
which is a collection of
communityEvent
objects. This List needs to be created and assigned to the instance variable
communityEvents.
This method should call helper method ExtractData
which will use LINQ to extract the data from my file.
The specified day is the date selected on the calendar control. This method will be called from the CreateEventList.
This method should clear all data from List communityEvents.
A LINQ
query that creates CommunityEvent
objects should select the events scheduled for selected
day from the file. The selected events should be added to List
communityEvents.
See code below.
Thanks,
public class CommunityEvent
private int day;
public int Day
get
return day;
set
day = value;
private string time;
public string Time
get
return time;
set
time = value;
private decimal price;
public decimal Price
get
return price;
set
price = value;
private string name;
public string Name
get
return name;
set
name = value;
private string description;
public string Description
get
return description;
set
description = value;
private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
if (eventComboBox.SelectedIndex == 0)
descriptionTextBox.Text = "2.30PM. Price 12.50. Take part in creating various types of Arts & Crafts at this fair.";
if (eventComboBox.SelectedIndex == 1)
descriptionTextBox.Text = "4.30PM. Price 00.00. Take part in cleaning the local Park.";
if (eventComboBox.SelectedIndex == 2)
descriptionTextBox.Text = "1.30PM. Price 10.00. Take part in selling goods.";
if (eventComboBox.SelectedIndex == 3)
descriptionTextBox.Text = "12.30PM. Price 10.00. Take part in a game of rounders in the local Park.";
if (eventComboBox.SelectedIndex == 4)
descriptionTextBox.Text = "11.30PM. Price 15.00. Take part in an Egg & Spoon Race in the local Park";
if (eventComboBox.SelectedIndex == 5)
descriptionTextBox.Text = "No Events today.";

Any help here would be great.
Look, you have to make the file a XML file type -- Somefilename.xml.
http://www.xmlfiles.com/xml/xml_intro.asp
You can use NotePad XML to make the XML and save the text file.
http://support.microsoft.com/kb/296560
Or you can just use Notepad (standard), if you know the basics of how to create XML, which is just text data that can created and saved in a text file, which, represents data.
http://www.codeproject.com/Tips/522456/Reading-XML-using-LINQ
You can do a (select new CommunityEvent) just like the example is doing a
select new FileToWatch and load the XML data into the CommunityEvent properties.
So you need to learn how to make a manual XML textfile with XML data in it, and you need to learn how to use LINQ to read the XML. Linq is not going to work against some flat text file you created. There are plenty of examples out on Bing and Google
on how to use Linq-2-XML.
http://en.wikipedia.org/wiki/Language_Integrated_Query
<copied>
LINQ extends the language by the addition of query
expressions, which are akin to
SQL statements, and can be used to conveniently extract and process data from
arrays, enumerable
classes, XML documents,
relational databases, and third-party data sources. Other uses, which utilize query expressions as a general framework for readably composing arbitrary computations, include the construction of event handlers[2]
or
monadic parsers.[3]
<end>

Issue while replicating the Master data from R/3 Backend to SRM

Hi experts,
I am supposed to do replication of master data from ECC 6.0 R/3 to SRM System.
I have issue at T- Code: R3AS.
For Initial Load of objets :
1) DNL_CUST_BASIS3
2) DNL_CUST_PROD0
3) DNL_CUST_PROD1
I am getting following error. :
 The following Errors/Warnings occured. Do you want to continue?
 DNL_CUST_BASIS3: No active entry in Table SMOFSUBTAB. Read OSS note 339787
 DNL_CUST_BASIS3: No active entry in Table SMOFSUBTAB. Read OSS note 339787
 DNL_CUST_BASIS3: Object will not be loaded
for all the objects we re geting the same error.
In OSS Note 339787 :
Reason and Prerequisites
You attempt to start the initial load of the R/3 adapter for an object for which no function module for processing data from the OLTP is entered in the SMOFSUBTAB table. This means that the data would be ignored if the initial load could be started.
Another cause for the output of this error message is the inconsistent maintenance of the OBJCLASS field in the SMOFOBJECT and SMOFSUBTAB tables.
Solution
Enter a processing module in the SMOFSUBTAB table or set the object to 'Inactive', so that no initial load is carried out for it. The change can occur using the maintenance Transactions R3AC5 or R3AC3.
If you want the object class to be communicated, change the OBJCLASS field in table SMOFOBJECT so that the contents correspond to the OBJCLASS field in the SMOFSUBTAB table for the object.
While checking the table entries, object
DNL_CUST_BASIS3, DNL_CUST_PROD0 and DNL_CUST_PROD1 are not there.
Table SMOFSUBTAB can not be maintained in SM30. how to maintain these entries in Table SMOFSUBTAB.
Can any one help me in this regards.
Points will be rewarded.
Thanks and regards.
Kalyan

Hi Dinesh,
i have done reqd entries in the table CRMSUBTAB in ECC?
also check other tables in ECC
CRMCONSUM
CRMRFCPAR
CRMPAROLTP in ECC
and
SMOFPARSFA in SRM
i want to know how to maintain the enteriers in Table L SMOFSUBTAB in SRM system.
regards
kalyan

Pull the data from legacy System into report and display with SAP data

Hi Friends,
My requirement is-
Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Report structure has) and finally display the records from both SAP and Legacy System by filtering duplicates.

Steps:-
Define the file path on selection screen:-
Selection screen data
 select-options (s_)
 parameters (p_)
 radio buttons (r_)
 checkboxes (x_)
 pushbuttons (b_)
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-f01.
parameter: p_file type text_512 obligatory.
Start-of-selection.
data : l_fname type string. " File Name
l_fname = p_file .
call function 'GUI_UPLOAD'
 exporting
 filename = l_fname
 filetype = 'ASC'
 has_field_separator = '#'
 tables
 data_tab = lt_data
 exceptions
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 others = 17.
if sy-subrc <> 0.
 message e000 with 'Unable to upload file from the PC'(t13).
endif.
lt_data is of same structure as the fields in the file.
For filtering duplicates:-
delete adjacent duplicates from lt_data.
Now display the records using either ALV or using write statements.
You can display the records in any of the way you want.

Error while deleting data from a write optimized DSO using a Process Chain?

Dear Bwers,
I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
Thanks
Raj
Error while deleting content of InfoCube/DataStore object ZLSD_G03
Message no. RSDODSO153

Please, check if you get any short dump in ST22 related to this issue.

Not able to get the data from synchronous Webservice To BPEL process

Hi All,
My requirement is : Third party has some webservice.They are pushing data to that Webservice(Wsdl).
Third part WSDL example : http://ipaddress:port/name/Service.svc?wsdl ( This is just example format of their WSDL)
After that I need to get that data into my BPEL process and update my system.
When I built My Snchronous BPEL process I imported third party WSDL(http://ipaddress:port/name/Service.svc?wsdl) through 'import WSDL' in dialog.After that I automatically got the (request and response schema elements) parameters from that WSDL.I gave input and output of the BPEL process from those elements.
I pasted that third party URL iin SOAPUI and I got their operations and schemas.Based on that I had choosen the elements for 'input' and 'output' of the BPEL processes.I am also getting the schema structures in 'Assign' or 'Transform' activity.
I built the whole process.
I have the Process.
Now Client is pushing data to their WSDL(http://ipaddress:port/name/Service.svc?wsdl) as it is their data pushing interface.But that data is not coming to my BPEL process and instance is not being created in EM console.
As I have imported their WSDL into my BPEL process,I need to get the data.But I am not getting the data.
Is there any problem in MY BPEL process?
(or)
DO I need to use 'Webservice' Adapter in 'Exposed Services' Swimlane in Composite Editor to have the third party URL, so that they Can push the data to that WSDL in turn that data comes into my BPEL process?
Can anybody help me this case?
once again my requirement is :
Client pushes the data through their WSDL url -----> I need to get that data into MY BPEL process --> I have my own WSDl to take that details into my system.

I will explain the requirement in small paragraph:
There are two applications.One is our application(X) and another one is third party application(Y).
I need to update in my application(X) based on data coming from application(Y).
I am using SOA as a middle tier to have communication between Y and X.
(Ex: if they send some info like event type 'event1' from Y ,I need to update that 'event1' data in my X application)
The work at third party application is :
According their info,They will push data from their end to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They are telling they can only send the data to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They will not consume our BPEL process(I think they might be wrong at this point of time).They have one WSDL to send or push the data from their end.
The work at from our side(SOA & X application)
From that point ,our BPEL process has to receive that data and update that data into my application(X).
I hope You understand my requirement.
Can you guide me through how to achieve this task as they are telling they have to use their WSDL to push the data?
(or)
Do I need to take 'Webservice' adapter into Exposed Services Swimlane in Jdeveloper to have their webservice(third party WSDL),If it is So Can you tell me the details how to take 'input' and 'output' for BPEL process?
(or)
Can YOu suggest me to talk to them to consume my BPEL process directly?
Thanks
Edited by: 899283 on Aug 17, 2012 4:55 AM

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

How to get/process the Data from XMLSocket?

Hello All,
I'm using Adobe Professional CS6, and Actionscript 3.0.
To start with I have a C# program that basically just feeds data out from a Server in the form of XML data. I then have a Flash program that should receive the data and then I'll do some stuff with it. We had this working in Actionscript 1.0 but we need to upgrade the code to Actionscript 3.0, but instead of just trying to convert stuff over to the new Actionscript version, I'm going to re-write the program.
So far I've basically just defined some EventListeners most of which I found examples of online for using XMLSockets. As of now the Flash program will connect an XMLSocket to the Server that is feeding out the data, and the server feeding the data resends new data every 5-10 seconds or so.
So when a grouping of XML Data comes in on the port I defined, the following Function gets executed for handling the incoming data. For my EventListener's Function for "socket.addEventListener(DataEvent.DATA, dataHandler);" ("socket" is defined as --> var socket = new XMLSocket(); ). So when the new data comes in it executes the above function.
The trouble I'm having is declaring a new variable of type "XML" and then using that variable to pull out individual "nodes/children" from the incoming XML Data. I found an example online that was very close to what I want to do except instead of using an XMLSocket to get data constantly streaming in they use the "URLLoader" function to get the XML data. I know I'm receiving the XML data onto the server because if I set the (e: DataEvent) variable defined in the function "head" to a string and then run a trace on that I can see ALL of the XML data in the "Output Window".
But I can't seem to be able to set (e: DataEvent) to a XML variable so I can access individual elements of the XML data. The example I found (which uses the URLLoader instead) uses this line (myXML = new XML(e.target.data);) to set the XML Variable, which won't work for mine, and if I try to do the same thing in my code it simply prints this for as many lines as there is XML data --> "[object XMLSocket]"
MY CODE:
*I left out the other Functions that are in my code for the EventListeners you'll see defined below, except for the one in question:
 ---> "function dataHandler(e: DataEvent):void"
import flash.events.IOErrorEvent;
import flash.events.ProgressEvent;
import flash.events.SecurityErrorEvent;
import flash.events.DataEvent;
var socket = new XMLSocket();
socket.addEventListener(Event.CONNECT, connectHandler);
socket.addEventListener(Event.CLOSE, closeHandler);
socket.addEventListener(DataEvent.DATA, dataHandler);
socket.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
socket.addEventListener(ProgressEvent.PROGRESS, progressHandler);
socket.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
var success = socket.connect('server.domain.name.local',3004);
The code in this function was used from an example I found online as described above in the post:
 LINK --> http://www.republicofcode.com/tutorials/flash/as3xml/
// The Commented out code (*in blue) will show ALL the xml data inside the "Output Window":
function dataHandler(e: DataEvent):void {
 // var myStr:String = e.data;
 var xml:XML;
 xml = new XML(e.target.data); //<--- THIS DOESN"T WORK (I DONT THINK 'target' IS CORRECT HERE)??
 if (socket.connected)
 // trace(myStr)
 trace(xml);
The Output from the line "trace(xml)" will show this data below in the "Output Window" (*FYI There should be 6 lines of XML Data on each 'update'):
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
Could someone show or point me in the right direction on this. I want to be able to access specific parts of the incoming XML Data.
Here's some sample XML Data:
<MESSAGE VAR="screen2Display" TEXT="CSQ_1" />
<MESSAGE VAR="F1_agentsReady" TEXT="111" />
<MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
<MESSAGE VAR="F1_talkingAgents" TEXT="333" />
<MESSAGE VAR="F1_callsHandled" TEXT="444" />
<MESSAGE VAR="F1_ABDRate" TEXT="555" />
Any thoughts or suggestions would be greatly appreciated..!
FYI:
I'm VERY new to Actionscript/Flash Developing (*about a week now), so go easy on me haha...
Thanks in Advance,
Matt

Hey Guys, thanks ALOT for the replies!!
Andrei1 and Sinious,
The code I show above is actually just what I found in an example online, and its what i was trying to show you what "they" used
in the URLLoader example. I wasn't trying to use URLLoader, but it was the closest example I found online to what I was trying to
do in terms of processing the XML Data, and not how I read it in. So XMLSocket IS definetly what I'm trying to use because the Server
I'm receiving the XML Data from "pushes" it out every 10 seconds or so. So yea I definatly want to use XMLSocket and not URLLoader...
Sorry for the confusion...
The example you show:
 var xml:XML = new XML(e.data)
Is actually what I had in my original code but I couldn't get it to show anything in the "Output Window" using the trace() method on
it, so I assumed I wasn't doing it correctly...
What my original code was in the "dataHandler()" Function was this:
function dataHandler(e: DataEvent): void
 var xml: XML = XML(e.data);
 if (socket.connected)
 trace(xml);
 msgArea.htmlText += "*socket.connected = TRUE\n"
 } else {
 msgArea.htmlText += "*socket.connected = FALSE\n"
OUTPUT:
And what I get when I run a Debug on it is, in the "msgArea", which is just a simple Text Box w/ Dynamic Text on the main frame it prints:
 "socket.connected = TRUE
 socket.connected = TRUE
 socket.connected = TRUE
 socket.connected = TRUE
 socket.connected = TRUE
 socket.connected = TRUE"
It prints that message 6 times in the msgArea for each XML Message that comes in (*which I think 6 times because there
are 6 "sections/nodes" in the XML Data). But then NOTHING prints in the "Output Window" for the "trace(xml)" command.
Not sure why nothing is showing in the "Output Window", maybe the XML is not complete? But I could see data in the "Output
Window" when I set "e.data" to a string variable, so I know the Data is reaching the program. Since I could see the XML Data in
a string variable, does that mean I can rule out that the XML Data coming in is considered a "complete" XML Document?
Because I wasn't sure if to be considered a complete XML Document it would need to have this included in the message..?
 "<?xml version="1.0"?>"
For the tests I'm running, one single XML message which is being pushed out from the server looks like this:
<MESSAGE VAR="screen2Display" TEXT="Call_Queue_1" />
<MESSAGE VAR="F1_agentsReady" TEXT="111" />
<MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
<MESSAGE VAR="F1_talkingAgents" TEXT="333" />
<MESSAGE VAR="F1_callsHandled" TEXT="444" />
<MESSAGE VAR="F1_ABDRate" TEXT="555" />
Would I need to include that "Header" in the XML message above?
 i.e. "<?xml version="1.0"?>"
Or do I need to be more specific in the trace command instead of just using "trace(xml)"?
Also yes, I already have a Flash Policy file setup and working correctly.
Anyway, thanks again guys for the replies, very much appreciated!!
Thanks Again,
Matt

Processing data from UI

Similar Messages

Maybe you are looking for