Processing of Outbound messages to TP

Hi,
I have a specific question regarding the sequencing/processing of messages sent by the back end before sending them to the TP. if for example, there are about 10 messages queued up(in a sequence) between B2B and the immediate backend component, how does b2b process it? in the same sequence it received it? Or does it apply some other logic there? Can you please let us know how b2b would process in this scenario? Also, is it in a single threaded mode or is there a configuration that can be used to make it multithreaded? There is a parameter called NoofIPListeners right?
Regards
Kavitha

Hello Kavitha,
By default Oracle B2B is single threaded and sequence of message processing would depend on message provider implementation(however in most of the cases it would FIFO). You are right about NumOfIPListeners setting. This makes B2B multithreaded and improves performance but it is not ensured that messages will be processed sequencially (in case of parallel processing)
Regards,
Anuj

Similar Messages

Not working: the creation of an outbound message WMMBXY after posting of GR

Hello all,
I understand by now that the message type WMMBXY is initially an inbound only type.
The requirment I'm struggling with howvever wants to send an outbound message containing approximate the same info as WMMBYX the moment after a goods receipt is posted via MB02.
Therefore I created a new FM with the code to populate te idoc-structure WMMBID02. I gave it a process code via WE41.
Then I created a via WE20 a new outbound partner profile for Partner Type LI containing:
Message Type = WMMBXY
Partner Function = VN
Last I created a new output-type for EDI processing also with partner function VN.
For the check function of WE20 everyting is OK but when in MB02 I give in this Output-type I get the following warning and nothing is written in the NAST-table:
Partner 11420 does not exist for partner function LF
Message no. VN006
Diagnosis
Partner does not exist for the partner function selected for this
transaction.
Procedure
Check your input.
Is it not possible to send EDI messages for this kind of transaction? Are there any extra steps to take. From other postings on this site and others I understand that it must be possible but none touch this subject.
Many tnx and regards.
Bart.

i think you have to maintain the vendor/customer in your conditionrecords.
maybe you have customize your output-type to EDI (6).
Regards,
Gordon

PO outbound message control - Condition record / PO IDOC outbound user exit

Guys,
I have a system with PO outbound message control sending PO idocs to a unique plant that is set up as a customer in the partner profile. I am using a custom message type and RSEOUT00 to send my idocs with custom message type to this plant. This interface works fine. Now my requirement has changed. I need to send PO's to varying plants (depending on the plant in PO item- all items on my POs belong to same plant).
I noticed that i cannot create condition tables with PO type and Plant combination. (SAP Note 457497 .Q-34).
So I have decided to populate all my PO idocs with a generic receiving partner number '9999' and planning to change this somewhere in a user exit. I found an user exit which looks helpful.
EXIT_SAPLEINM_001 . FM
MM06E001 - Enhancement.
But somehow this exit is not triggered in during PO creation ME21N or change Me22N/Me22.
Is this because I am using a custom message type instead of standard message type ? (I still use the process codes Me10/Me11). Would this matter ? When should this user exit trigger (during creation of idocs in status 30 or when i run RSEOUT00 to sweep these idocs in status 30 to status 03) ? Any tips will be useful.
THanks.
Edited by: Shareen Hegde on Jul 21, 2008 10:13 PM

I found a OSS note -Note 457497 (Q&A # 34), which talks about the same . This was my assumption too. I was just confused because I saw plant(WERKS) in the field catalag of the access sequence.
I don't know what header field I can use to map the plant (I agree its a good idea to do this). But I have decided to do it another way. I will change the receiving partner on the control record depending on the plant in an user exit
- EXIT_SAPLEINM_001.
Thanks for your answer , Mahesh.

IDOC to File, variable substitution on outbound message XML tag attributes

My scenario is IDOC to FILE using XSL mappings.The target format is 2 XML tags (header, line) with the data stored in the attributes of each tag.
EG. <header attr1=one attr2=two attr3=three><line attr1=one attr2=two /></header>
The name of the file is dictated by an outbound attribute value in the header tag.
Can I get access to it the attribute in the target message in the CC_FILE using variable substution. ?
Currently I am not using content conversion as the XSL produces the file format needed, so I would pefer not to change the outbound message format/structure as this is going to an external party. I would prefer not to change the outbound format as this would need content conversion to strip the unwanted/information/processing node that is used for this purpose (file naming).
The name is a calculation of fields in the IDOC and is not explicit dictated (business logic is applied in the mapping to get the file name), so I would prefer to use the attribute of the resulting XML to keep the "business logic" in the XSL..
Things that cannot be changed.... 1. Must use XSL.for mapping. 2. Format cannot be changed of the outbound message. 3. Would prefer not to involved content conversion to keep formatting/node structure in the XSL mapping.
I have seen some reference to this being possible on the forums but nothing solid from what Ive read.
Something like var1 = payload:/Header/@attr1 in variable sub to get at the attribute
Any comments ?
Thanks in advance.
One final piece of info. its on a PI 7.1 system.

I think its best explained by my other thread Link:PI 7.1 Access to Dynamic Configuration through Java Class .
Thanks for the link I have already implemented based on that link but the one crucial difference is that it is implemented using a static method with no reference to the actual object (payload) for Dynamic configuration. It seems that without the 7.0 API which isnt available in 7.1 by default XSL with java extentions is limited to static methods. If you could read the other thread it certainly is possible I'm mistaken.

How to handle Changes in the Structure of Outbound Message.

Hi Experts,
I have a File2RFC scenario where the Outbound Message fields are (for e.g,) ID,Name,Loc, and Status. The structure of the xml file which needs to be picked by sender file adapter is changing each time based on the data entered by the user. I am sure this will fail in IS with RuntimeException in Message-Mapping transformation Error. Is there anyway to handle this kind of situation.
Message Sample- 1 (Message Processed successfully as it contains all the 4 fields...)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
   <root>
      <ID>1234</VesselID>
      <Name>PIUSER</VesselName>
      <Loc>System A</Type>
      <Status>1</Status>
   </root>
</ns0:MT_Send>
Message Sample- 2 (Message Failed with Runtime Mapping Exception in IS...'Loc' is missing)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
   <root>
      <ID>5678</VesselID>
      <Name>SAPUSER</VesselName>
      <Status>2</Status>
   </root>
</ns0:MT_Send>

Hi Ravi,
Thanks for the reply. I think changing the cardinality will not solve this issue. Because the file which is being picked by Sender file Adapter is changing its structure everytime based upon the values entired by the user.
For example - In Message 1 User has entered all the 4 values...so the structure is full.
Message Sample- 1 (Message Processed successfully as it contains all the 4 fields...)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
<root>
<ID>1234</VesselID>
<Name>PIUSER</VesselName>
<Loc>System A</Type>
<Status>1</Status>
</root>
</ns0:MT_Send>
In Message 2 - user has entered only 3 values...Though I have kept Loc as 0 to Unbound it fails as there is no tag <LOC></Loc> here.
Message Sample- 2 (Message Failed with Runtime Mapping Exception in IS...'Loc' Tag is missing)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
<root>
<ID>5678</VesselID>
<Name>SAPUSER</VesselName>
<Status>2</Status>
</root>
</ns0:MT_Send>

To Monitor inbound and outbound messages for ECC 6.0 business system

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Monitoring of inbound and outbound messages for business system ECC 6.0

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Outbound message in Near Real Time - in CC&B V2.1

Greetings,
In CC&B V2.1, I am trying to send an outbound message from CC&B to an external Webservice.
The process was as follows:
1-Configured a Business object based on F1-OUTMSG Maintenance Object
2-Create a new outbound message type based on the previous BO
3-Created a new XAI sender with based on "OUTMSGSNDR" XAI class with HTTP URL pointing to the external webservice
4-Created a new external system and linked the outbound message type to it.
5-Created a plug-in script to insert a record into table F1_OUTMSG after forming the XML message
Now when the records are inserted into F1_OUTMSG, the default XAI Receiver (F1OUTNNDMSG based on XAILOCAL executer ID) shipped with the system is failing with a "Null pointer exception".
I am supposing when a record is inserted into table F1_OUTMSG with Pending status, the receiver will pick it and send it to sender specified in the external system configuration.
Where did I go wrong in the above process?
Thanks in advance
AK

Hi,
Thanks for the response. I applied the change, but still same error happens when I refresh the Receiver.
Where could other configuration error be?
Thanks

XAI outbound messages and JMS

I was hoping someone had some better (or more complete) documentation on how to go about setting up XAI for outbound messages using JMS.
I find XAI documentation rather sparse on this subject so I was hoping for some expert tips ;-)
Our setup is CC&B 2.2.0 with Weblogic 10 as application server. I am new to CC&B so I am not sure if I can just turn messaging on for everything or if it is business object/service specific.
To be more concrete - I would like to place Field Activity messages onto queue once Field Activity has been created/modified/canceled.
thanks in advance

1) Who and when are these outbound messages are required to be sent out..Kindly explain with an example.
Whenever the Outbound Message is created with Pending Status the framework will start to process
for Example:-
I've have a change handler for Account entiry. so whenever the Account entity modified or created the change handler will be invoked. In the
change handler i've a code that will create a Outbound Message and i m storing the xml content in the XML Source of the Outbound Message.
So now the outbound message is created with the XML content and status is pending. Once the message created the framework will process for sending
to External system
2) Is my Outbound message a XML request enclosed in SOAP envelope.
Use the Message XSL file under External System page if you want enclose the xml content with SOAP envelope
3) We configure an external system , with an outbound message type, XAI sender etc.So does that mean that the services of external syatem is interfaced through with CC&B through maybe the database, and the services of external system are defined in XAI inbound services. So that the MPL server reads the request, invokes the service name defined in the outbound request.
No... the process is very simple...
+1. you have created Outbound message type+
+2. created XAI Sender+
+3. and External System(in the this page u've included all the abv configuration).+
+4. if create a outbound message the Framework will process and invoke(sending request to external system) the external system with the xml content+
wht u've stored in side xml source column.
Edited by: pgurumoorthy on Apr 22, 2009 3:11 AM

What triggers idoc posting in outbound message from sap ?

Do change or create events can be used to trigger Posting to IDOC? Have any body used idoc for outbound message sending from SAP?

Hi Reddy,
Posting IDoc Packets
Two groups of function modules are used to post IDocs:
· Function modules which process IDocs in mass. These transfer packets of IDocs for which individual IDocs are updated in the same Logical Unit of Work (LUW).
· Function modules which process one IDoc per call.
· INPUTTYP contains the code for posting function modules.
To display the function module's INPUTTYP on the ALE Development screen, choose IDoc ® Inbound Processing ® Function Module® Maintain Attributes (BD51).
INPUTTYP can contain the following values:
· "0", for function modules which process IDocs in packets.
"1" and "2" for function modules which process one IDoc per call:
If you post the IDocs immediately, the SAP sending system determines the packet size. ALE inbound processing can recognize if the posting function module allows packet processing and if so, passes the IDoc packet to it. If not, the IDoc packet is split into individual IDocs.
If IDocs are posted in the background, you can specify the size of the IDocs to be generated in the program RBDAPP01.
If you use function modules that can process IDocs in mass, the database load is reduced.
If you group IDocs into packets, this may also be practical for function modules that post inbound IDocs one at a time, because the ALE layer calls the function module several times in the same dialog process, thereby reducing the administrative load on the SAP system.
If program RBDAPP01 carries out the background processing, as a guide, you should use a packet size of between 20 and 100 IDocs.
Packet processing and parallelism complement one another. Packet processing and parallelism complement each other, although in some situations they may compete with each other. If the size of the packet is too big, this may mean that not all the available dialog processes are being used.
Scheduling IDoc Posting
There are two ways of posting IDocs in ALE inbound processing:
·        Immediate processing:
Upon receipt inbound IDocs are immediately released for posting. ALE inbound processing splits the IDoc packets into individual IDocs.
·        Background processing
Inbound IDocs and IDoc packets are first saved in the database. IDoc packets are split into single IDocs beforehand.
The program RBDAPP01 later releases the saved IDocs for processing. Single IDocs can be put into packets and then processed.
Perform the following steps:
1.       Set-up background processing (IDoc/ALE area menu):
IDoc Interface/ALE ® Administration ® Runtime Settings ® Partner Profiles (WE20)
Then the required setting is: In the detail screen Inbound Parameters select the option Trigger by background program.
2.       Schedule posting (ALE customizing):
Transaction SALE ® Set-Up System Monitoring ®
         Posting IDocs in Recipient System ®Schedule
You can also process the IDocs manually by passing them to the posting function module. In ALE Administration choose Monitoring ®Status Monitor (BD87), select the IDocs and then select Process.
Regards,
Kumar.

SDP-25505: Unable to enqueue outbound message.

Hi,
I get the following error when I try to send an email notification from the workflow process. The usermessaging-email properties are set with valid values.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
Error while sending notification.
Error while sending notification to email.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
SDP-25505;
Index: 0, Size: 0;
[2010-04-28T14:15:00.060-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.services.notification] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IX6HT1TEGRSayDyWMG1BqA6p00000F,0] [APP: soa-infra] <.> HWFMailer: Sending Notification Message to SDPM
[2010-04-28T14:15:00.061-07:00] [soa_server1] [ERROR] [SDP-25505] [oracle.sdp.messaging.client.ejb] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: 0000IX6HT1TEGRSayDyWMG1BqA6p00000F,0] [APP: soa-infra] Unable to enqueue outbound message.[[
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:547)
     at java.util.ArrayList.get(ArrayList.java:322)
     at oracle.sdpinternal.messaging.jms.JMSUtil.selectQueueInfo(JMSUtil.java:393)
     at oracle.sdpinternal.messaging.MessagingClientBean.getEngineOutboundSender(MessagingClientBean.java:632)
     at oracle.sdpinternal.messaging.MessagingClientBean.enqueue(MessagingClientBean.java:544)
     at oracle.sdpinternal.messaging.MessagingClientBean.send(MessagingClientBean.java:1095)
     at oracle.sdpinternal.messaging.MessagingClientBean.send(MessagingClientBean.java:481)
     at oracle.sdpinternal.messaging.MessagingClient_5f88hc_ELOImpl.send(MessagingClient_5f88hc_ELOImpl.java:1690)
     at oracle.bpel.services.notification.impl.asns.ASNSInteractionBean.send(ASNSInteractionBean.java:225)
     at oracle.bpel.services.notification.impl.asns.ASNSInteraction_rwgsr4_ELOImpl.send(ASNSInteraction_rwgsr4_ELOImpl.java:303)
     at oracle.bpel.services.notification.impl.asns.ASNSDriver.send(ASNSDriver.java:488)
     at oracle.bpel.services.notification.impl.asns.ASNSDriver.sendEmailNotification(ASNSDriver.java:335)
     at oracle.bpel.services.notification.impl.DefaultNotificationServiceImpl.sendEmailNotification(DefaultNotificationServiceImpl.java:279)
     at oracle.bpel.services.notification.impl.NotificationManager.sendEmailNotification(NotificationManager.java:278)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.deliverNotification(MDBConsumer.java:301)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.processNotification(MDBConsumer.java:164)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.onMessage(MDBConsumer.java:115)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3747)
     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5096)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Also, when the soa_server is started The following exception is thrown. Is this the reason for the above error.
[soa_server1] [ERROR] [SDP-25700] [oracle.sdp.messaging.util] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IX0U145EGRSayDyWMG1BpmYs000003,0] [APP: usermessagingserver] An unexpected exception was caught.[[
javax.naming.NameNotFoundException: While trying to lookup 'OraSDPM.Queues.OraSDPMEngineRcvQ1' didn't find subcontext 'Queues'. Resolved 'OraSDPM'; remaining name 'Queues/OraSDPMEngineRcvQ1'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at oracle.sdpinternal.messaging.util.MessagingUtil.getQueueInfoList(MessagingUtil.java:1111)
     at oracle.sdpinternal.messaging.EngineLocator.getEngineReceivingQueues(EngineLocator.java:360)
     at oracle.sdpinternal.messaging.command.CommandProcessorBean.init(CommandProcessorBean.java:136)
     at oracle.sdpinternal.messaging.command.CommandProcessorBean.driverCommand(CommandProcessorBean.java:63)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:55)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy166.driverCommand(Unknown Source)
     at oracle.sdpinternal.messaging.command.CommandProcessor_p9x7mq_EOImpl.driverCommand(CommandProcessor_p9x7mq_EOImpl.java:61)
     at oracle.sdpinternal.messaging.command.CommandProcessor_p9x7mq_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at oracle.sdpinternal.messaging.command.CommandProcessor_p9x7mq_EOImpl_1032_WLStub.driverCommand(Unknown Source)
     at oracle.sdpinternal.messaging.driver.DriverHelper$RegistrationWorker$RegisteringState.onExecute(DriverHelper.java:528)
     at oracle.sdpinternal.messaging.driver.DriverHelper$RegistrationWorker.run(DriverHelper.java:633)
     at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
     at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
     at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
Appreciate help.
Thanks
Soumya
Edited by: user12794653 on Apr 28, 2010 4:29 PM
Edited by: user12794653 on Apr 28, 2010 4:30 PM

I have also tried to send email notification from soa suite to James apache server. I have configured the outgoing server properties in the email driver. but after deplyoing and running the process, I m getting an exception as :
Caused By: ORABPEL-31017
Cannot create notification object.
Error while creating oracle.bpel.services.notification.AbstractCustomNotificationServiceImpl object.
Internal Error; Cannot create Notification Object.
     at oracle.bpel.services.notification.impl.NotificationManager.getCustomNotificationService(NotificationManager.java:424)
     at oracle.bpel.services.notification.impl.NotificationManager.sendEmailNotification(NotificationManager.java:277)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.deliverNotification(MDBConsumer.java:301)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.processNotification(MDBConsumer.java:164)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.onMessage(MDBConsumer.java:115)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.ClassNotFoundException: oracle.bpel.services.notification.AbstractCustomNotificationServiceImpl
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at oracle.bpel.services.notification.impl.NotificationManager.getCustomNotificationService(NotificationManager.java:421)
     at oracle.bpel.services.notification.impl.NotificationManager.sendEmailNotification(NotificationManager.java:277)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.deliverNotification(MDBConsumer.java:301)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.processNotification(MDBConsumer.java:164)
     at oracle.bpel.services.notification.queue.sender.MDBConsumer.onMessage(MDBConsumer.java:115)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please suggest if anybody can figure out the problem.
thanks '
sohini

Multiple Outbound Message in a single XML

Hi,
My XML output from backend application will contain multiple messages. What should the XML look like in order for B2B to process all the messages?
Should it be something like that?
<XYZ>
<Message-INVRPT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.edifecs.com/xdata/100 guideline.xsd" XDataVersion="1.0" Standard="PFF" Version="">
</Message-INVRPT>
<Message-INVRPT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.edifecs.com/xdata/100 guideline.xsd" XDataVersion="1.0" Standard="PFF" Version="">
</Message-INVRPT>
</XYZ>
regards,
nww

Hi,
Batching is not supported for custom document. You need to enqueue your message one by one into B2B. If you want to batch them together, you will need to write a script to concat them together after the messages have been translated into native EANCOM format.
Eng

AS2 adapter Outbound Message

Hi,
We have recently configured AS2 adapter for a party and started to test. We tried to send an outbound message to the party and found the following status in our seeburger monitor
It says "Initiaion to Backend Pending" with yellow state. Further the status description shows "AS2 Message created. Will try to send it now to partner and wait then for synchrone MDN.".
What should we do now? Is it the job of the receiving party to accept the message or do some thing at their side.
Regards
Krish

Hello all,
Note 1287778 solved the problem. Thanks for the reply.
Kind regards, Wilbert
Edited by: Wilbert Jeuken on Feb 24, 2010 9:43 AM

Receiver Determination for an Outbound Message to Multiple Receivers

Hi,
I have a scenario in which one Single Outbound Message needs to be sent to multiple receivers.
1. I have set up the Receiver Identification correctly i.e I can see the Receiers and their end points.
2. The problem is that when the first Message fails i.e due to Mapping error , the remaining Receivers do NOT get any messages.
3. So does XI does a Rollback of the whole set of receivers if first one fails?
Logically speaking the Message should go to other Receivers even if it fails for one of them.
I see a Red flag and then a Green flag in SXMB_MONI.
Please advice.
Thanks so much.
A

Hi,
I checked the trace log for Receiver Identification.
It says : Evaluating Condition //VBELN EQ '999999'.
INVALID RECEIVER : (rec name)
If the XPATH has turned false why does it still call the same Receiver ??
The value of VBELN is never 999999.
Can you please advice?
Thanks
Ashish

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

Processing of Outbound messages to TP

Similar Messages

Maybe you are looking for