Processing power for !Format Event

I'm planning to do some slightly complex string manipulation to an Adobe Output Designer template field using the !Format event, like such:
@(If ((@(Length ("@_$_.")==9))&&@(Substr ("@_$_.", 1, 1)=="A"),"@(Substr ("@_$_.", 1, 1))****@(Substr ("@_$_.", 6, 4))", "@_$_."))
There is some concern by my server admin about the server load for this string manipulation, especially if the Adobe Output Designer is generating hundreds of thousands of documents.
Has anyone encountered any slowdown in the system as a result of the !Format event string manipulation? Is it known to be inefficient in any way? Sorry for the odd question and thanks in advance for the advice.

Hi,
I don't know enough about balanced vs unbalanced issues to comment but I will tell you that I'm only running with 2 GB ram (1 + 1), running lots of plugins and software instruments and I am not encountering these problems. Since I've never heard of anyone having problems with odd numbered or unbalanced ram, I'm wondering if there may be faulty ram at play here. From the way Dreams described his/her current project I can't see this maxing out 2 Gb ram let alone 3. But if the system was only addressing 1 Gb ram... Maybe. The only other thing I can suggest is making sure your not leaving other unnessessary apps running in the background. Could just be another bug. By the way I don't know whether or not you know this but clicking on the little CPU meter on the transport bar brings up a much bigger meter.

Similar Messages

Process flow for Maintenance Event Builder integrated with PS

Dear EAM Master ,
Good Day. Can anyone show me how's the process flow for Process flow for Maintenance Event Builder integrated with PS.
Appreciate.
Thank you.

[SAP Help|http://help.sap.com/erp2005_ehp_05/helpdata/en/d7/d0b83a47d0c649e10000000a114084/frameset.htm]
Thanks
Narasimhan

Limit the process power for particular process

Hi,
I would like to know how to limit the cpu process for particular application in Solaris 9.
Regards,
WONG

hi,
how can i start srm in solaris.
/usr/sadm/lib/wbem/com/sun/wbem/solarisprovider/srm
i found in the above path is directory.
kindly tell me alternate path.
Regards,
Raja

Not enough processing power for LE8 in my MBP?

I'm running LE8 on my 2.16ghz Core 2 Duo Macbook Pro with 3GB of RAM. I record to an external Firewire 800 hard drive, 7200 rpm. I would think this setup would be more than adequate for running projects with 16 tracks of audio with maybe 1-3 plugins per track (but not alwaysthat much, usually less), and 1 or 2 softsynth tracks. During playback and overdubbing LE8 commonly stops and the popup tells me that it could not process the required data in time. It seems to happen randomly, but more often than not it's during the pass through of the session, usually when a lot of tracks start playing at once. For example, a guitar intro with a couple of tracks of guitar that leads to the rest of the band kicking in, jumping to 16 tracks of audio. Kills it every time. I can't imagine that my band came up with the concept of dynamic song arrangements...
The CPU meters in LE8 are not maxed out, if those meters are even accurate, they show about halfway for both cores, give or take.
What gives?

Hi,
I don't know enough about balanced vs unbalanced issues to comment but I will tell you that I'm only running with 2 GB ram (1 + 1), running lots of plugins and software instruments and I am not encountering these problems. Since I've never heard of anyone having problems with odd numbered or unbalanced ram, I'm wondering if there may be faulty ram at play here. From the way Dreams described his/her current project I can't see this maxing out 2 Gb ram let alone 3. But if the system was only addressing 1 Gb ram... Maybe. The only other thing I can suggest is making sure your not leaving other unnessessary apps running in the background. Could just be another bug. By the way I don't know whether or not you know this but clicking on the little CPU meter on the transport bar brings up a much bigger meter.

ILP:: Inline power process coredump for switch

Hi all,
I am investigating POE issues on a 3850 stack, and i notice some things while troubleshooting
Switch Ports Model              SW Version        SW Image              Mode
     1 56    WS-C3850-48P       03.03.03SE        cat3k_caa-universalk9 INSTALL
*    2 56    WS-C3850-48P       03.03.03SE        cat3k_caa-universalk9 INSTALL
I have some debugging active.
ILPOWER:
ILPOWER event debugging is on
ILPOWER controller debugging is on
I see in the logs the following message
021030: Nov 14 2014 11:05:01.185 CET: ILP:: Inline power process coredump for switch 2
021034: Nov 14 2014 11:05:06.841 CET: ILP:: Inline power process coredump for switch 1
021041: Nov 14 2014 11:05:11.188 CET: ILP:: Inline power process coredump for switch 2
021048: Nov 14 2014 11:05:16.872 CET: ILP:: Inline power process coredump for switch 1
021049: Nov 14 2014 11:05:21.198 CET: ILP:: Inline power process coredump for switch 2
021065: Nov 14 2014 11:05:27.002 CET: ILP:: Inline power process coredump for switch 1
021079: Nov 14 2014 11:05:31.209 CET: ILP:: Inline power process coredump for switch 2
021080: Nov 14 2014 11:05:36.873 CET: ILP:: Inline power process coredump for switch 1
021093: Nov 14 2014 11:05:41.219 CET: ILP:: Inline power process coredump for switch 2
It seems its a proces as each of the stackmember logs this message every 10seconds.
I have search-engined this message, but to no avail,
i dont think this is a software crash as i dont have any crashfiles on the system.
What process generates these messages and why, how to troubleshoot this.
thank you in advance.
With kind regards,
Thijn van der Schoot.

What output do you get from:
#sh power inline

Process Chains Always Hangs at the second step waiting for an event

Gents;
all BI process chains created in Production system are always hanging in the second step waiting for an event RSPROCESS with a certain parameter. This issue is happening for all process chains in Production system and it is not happening for the same in other systems in the landscape (development, Copy of porudction, quality and so on). I tried to trigger the event manually using SM62 but the job is always stick to status " released". the same thing was replicated in other systems and the job status has changed and the process was completed.
Any idea what might cause this issue??
Thanks.

Hi,
You said that this thing is happening only in production system.Try doing the following checks :
1.Check SM21to see if there are any red entries.It can be possible that there is some data base RFC connection failure.While checking SM21, make sure you give proper selection condition.If there are any red entries, you may take the help of basis guys to understand the type of failure.May be file system has got some problems.
2.Check St22 and try to analyse if any short dumps.
3.Try to check Connection with the source system ( Goto RSA1->source system tab->right click on the source system and select check option to find if any errors in the connection.
4.If possible, try to load manually in some other info provider.
Thanks,
Tarun Brijwani.

Section format event - Report Designer Component for Crsyatll 11

Hi,
I have been trying to find some sample code for Visual C++ using MFC to try and hook into the format event when a section of the rpt gets rendered. I have looked through all the samples and have not really been able to find anything conclusive.
I basically just need adjust the width and height of the OLE object. If anyone could point me in the right direction or provide some sample code that would be most helpful. Just something how to use an event sink for example?
Thanks in advance, Dene.
PS this might not be in the right forum, there is a bewildering number to choose from for a new comer.

Hello Dene,
please find some [RDC C++ samples for event handling|ftp://ftp.businessobjects.com/pub/incoming/CPP_code_samples_events_thread_999932.zip].
As your issue is about our [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs;, please post your future issues in this dedicated forum.
Thanks a lot
Falk

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

Hi,
Sorry, we do not support a matrix-question field. Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
Thanks,
Lucia

How to find Process chain for event and parameter

Hi,
I have Event and parameter for the process, I wanted to know the which process chain does that process belons to.
Is there any table where I can see those.

Hi,
Try these tables.
RSEVENTCHAIN    Event Chain Processing Event Table
RSEVENTHEAD     Header for the event chain
RSEVENTHEADT   Header for the event chain
RSPCCHAIN Process chain details
RSPCCHAINATTR   Attributes for a Process Chain
RSPCCHAINEVENTS   Multiple Events with Process Chains
RSPCCHAINT   Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Chains)
RSPCLOGCHAIN   Cross-Table Log ID / Chain ID
RSPCLOGS Application Logs for the Process Chains
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES   Variables for Process Chains for Runtime
RSPC_MONITOR Monitor individual process chains
Hope this helps.
Thanks,
JituK

Can i use a g3 imac for extra processing power

hello, can i use an imca g3 graphite to supplement by g5 1.6 model. if so, how? i am using logic and am running into serious processing problems....is there anything i can do to make sure i am using the processing power of the g5 to the max?
thaqnks

First and foremost, make sure that Logic (and the 3rd party stuff) are the only thngs running on your desktop (ie, no Dashboard apps in the background, no iTunes, no iPhoto, etc, etc).
Second, when you do use a 3rd party plug in, make it sound as close to accurate as you want, then bounce that track and reimport it as a plain audio track (much less processing power need to play the audio track than to apply effects in real time). You can always go back and fine tune later.
Third, Sculpture and Sound Designer are HUGE CPU hogs. Use them sparingly or in the case of Sculpture, bounce the track or freeze it.
Those will release a lot of processor cycles and move you on your way to better performance from your machine.
Good Luck!
X

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)

It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues.

Choices in Expanding My Processing Power

Hi,
I'm considering choices in expanding my processing power. Unlike those
who only own Logic Pro (which only works if a dongle is inserted), I own
Logic Express and I have upgraded to Logic Pro. This means, when considering
the equation for expanding my processing power, that one option is to buy
a new Macintosh computer and install Logic Express on it and use this
external computer as an external musical instrument.
So, there appears to be two ways to expand my meager G4, 1.5 gigs,
Mac OS 10.4.8 system:
1. I can buy an external box, probably one that plays EXS-24 samples, or
2. I can buy another Macintosh computer (probably a lower-end computer,
but it would have 1.5 to 2.0 gigs of memory, it would have at least one
intel duo processor).
Does anyone have any suggestions on how they've expanded their system
to perform more musical instruments in the orchestra? Specifically, I'd
probably off-load my Garritan Orchestral Strings (using the lite versions)
to this new outboard box or computer as EXS-24 samples.
Are there any surprises in store? For instance, if I buy an outboard,
non-computer, but an actual sampler-player, is it relatively easy to copy
ESX-24 samples that my Mac has converted from gigastudio format
to this external musical playing box?
Right now, I'm leaning towards simply buying another Mac and installing
Logic Express on it. Since Logic Express has a Channel Splitter in the
environment, I should at least be able to get 16 articulations out of this
one Mac computer.
Thanks,
Sys6
P.S.
Jonathan, thanks for your response to
http://discussions.apple.com/message.jspa?messageID=3436479
I will in the relatively near future, have more questions, as I investigate
in more detail your ideas. Thanks much.

Hi,
Since I posted this question, I've been reading pertinent sections
from Paul Gilreath's The Guide to MIDI Orchestration, 3rd Edition.
I'd like to restrict my above question to an "older" set-up. That is,
assume that I will buy an external computer to use as an out-board
player (that is, it will respond to MIDI and create the sounds of, say,
the string section); and, assume that I will be using MIDI interfaces
or USB MIDI interfaces to carry the MIDI signals. All audio signals, both
from my main, old computer and the new external playing-computer
will go to simple mixer and then out to my speakers. Keep in mind that
this set-up is just for live, fast feed-back while composing (bouncing
is quite a time consumer).
So, do any of you out there use an extra computer (or two) simply
to play back more sounds? Or, do you primarily just bounce within
Logic using one computer?
And, this is my fundamental question:
If you bought a new computer, what brand, and what software would
you run on it?
My virtual orchestra is gradually growing and now consists of the
following:
Apple's JamPack Orchestra (but, as I explore, I find it not a real solution).
Westgate Studios: Woodwind Collection, Expanded Edition, $200
Garritan Orchestral Strings: I use the lite patches to save memory and
processing power)
Pro Sessions Orchestral Brass (based on $1,000 Sonic Implants brass), but is a much reduced edition for only about $100 (and has limited solo instruments).
Apple's EXS24 trumpet and trombone.
Westgate Studio's free Trumpet I downloaded.
However, even the above "low-endish" orchestra uses up more computer
processing power than I have if I want to hear the orchestral score "live"
(that is, in real time as I write the music).
Thanks,
Sys6

Notification for reconciliation events.

I have configured the task in the Design console for receiving the email notification for the recon events (insert and update) for xellerate User process form.
The steps that I followed are:
In the Design Console add the email notification information in the Reconciliation Insert Received (or Reconciliation Update Received) process task for Xellerate User:
a. Open Process Management - Process Definition and query for "Xellerate User"
b. Double-click on the box to the left of the task "Reconciliation Insert Received" (or "Reconciliation Update Received").
c. In the pop-up window, click on the Assignment tab and configure to use the default rule, target type User, and set the "User" column to the login of the user who should receive the email notifications.
d. Click on the Notification tab and check the "Assignee" checkbox, set the status to "C" for Completed, and then set the Email column to the email template to send.
I have setup the Email Server IT Resource as well as the email Ids.Still I am not receiving any emails for the events.
Am i doing something wrong in the design console configuration?
Any help is appreciated.Thanks

In Assignment tab - As you have configured assignment of this user to some user, you can configure email as follow
Scroll right - provide email template name under "Email Name", click on check box "Send Email"
Run PurgeCache.sh after these changes.

Legacy data upload for Training & Event Management

As per the requirement, the legacy /history data for training events is to be uploaded in the system. To start the process the data templates were prepared for uploading training objects like D (Business Event Group), L (Business Event Type) and E (Business Event) and these were uploaded. Also the relationships A003 between D & L and A020 between E & D were also maintained. As a part of training history the attendees were also maintained (uploaded) using the relationship A025 between E & P objects. However when we go to PSV2, then the tree structure does not reflect the name of the person who attended the event.
Please suggest and advice.

Hi Nitin,
I have a query regarding the Legacy data. I wanted to ask you that how did you structure the Historical BEG and BET.
Did you create different BEG for the Current and the Legacy data.
But in that case there could be BET's common in both the current and legacy data with different object ids
For e.g. Under Current BEG and Historical BEG I may have a BET Technical Programmes with diffrent Ids say 60000000 and 60987655. This may create a problem when running reports.
Pls tell me strategy that you have used for creating the catalog.
Regards
Yashika Kaka

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

Processing power for !Format Event

Similar Messages

Maybe you are looking for