Product category from CRM_ORDER_READ
Hi,
can anyone tell me how to find out the values for "product category" from FM "CRM_ORDER_READ"?
-Ganesh
Hey Ganesh,
This fm is used to read the order's and lt_products will return produst used in the order.
If you want to get the product category use the FM:CRM_WAP_PRODUCT_GET_CATEGORY
Hope this will help.
Regards,
Arjun
Please do reward points
Similar Messages
-
Transfer product category from catalog to SRM with 2 BE systems
Hello experts,
We are having an issue when transfering products from the SRM-MDM Catalog though OCI, since we have an SRM extended classic scenario connected to 2 backend systems.
When the information is downloaded to SRM, the product category is changed and a "default" is assigned.
SAP has confirmed this issue happens because there are 2 entries in table COMM_CATEGORY for this value (even though they are clearly differentiated by backend system).
In our case, let's say Product Category "OS" (Office Supplies) exists in both backend systems, and it seems the system only searches for "OS" instead of doing a link to the logical system somehow.
How can I implement BADI BBP_CATALOG_TRANSFER in order for the system to use the right Product Category? Should I map one the backend system in one of the custom fields or is ir possible to somehow get the backend system in some other way?
Regards,
Gilberto GallardoHi Gilberto,
You should use the BBP_CATALOG_TRANSFER Badi to also define the relevent category GUID during transfer, in this way you can make the category unique and the default will not be selected.
Regards,
Jason -
Uploading Product category from csv file
Hi Experts,
I have a csv file contianing the product categories.
I have to upload that product category to the standalone SRM system.
How can i achieve the same?
Please help.
Thanks in Advance.
Regards,
PrashantHi Muthu
Thanks for the reply,
I m working on SRM 7
Can you tell me if we still need to apply the node?
I found out a function module COM_CATEGORY_MAINTAIN_MULTIPLE
but even that FM is not working fine.
Please reply.
Thanks and regards,
Prashant -
Error in Product Category Replication
Hi Gurus,
We are trying to replicate the product category from R/3 4.7C system to SRM5.0 system.
All the relevant table settings have been done in both the systems and we have successfully loaded objects: DNL_CUST_BASIS3 and DNL_CUST_PROD0 from R/3 to SRM system.
Now, the problem is with loading of the object DNL_CUST_PROD1. When we start its intial upload, the outbound queue in SRM system shows that the status of the queue is "SYSFAIL". The details of the error message show : "Filter criteria invalid. See note 0419752". We have set filter for T023 table for MAKTL field, so that only one material group is replicated from R/3 client.
We have checked the relevant release versions mentioned in the note, but our systems are on a higher version release.
Could anyone let us know which correction patch to implement in this case?
Thanks n Regards,
AncyOK. GO to R3AR2 AND CLICK THE PENCIL And click new entries
now you get requester name
adapter object =DNL_CUST_PROD1
table name =T023
field name = MATKL
LOW = you are material grup which you want to only rplicate
option = Equality (=low)
high = empty
go to r3ar4 and give your request name and supply dest and source that all
check comm_category table. -
Replication of product master and Product category
Hi
Please let me know steps involved in replicating
Product master and product category from R/3 to SRM
Regards
AshishHi Ashish,
The blogs mentioned by Kathirvel explains clearly the entire replication procedure of Master data from R/3 to SRM.
Neverthless find some points which needs to be taken care during replication :
1. Ensure that the tables CRMCONSUM, CRMSUBTAB, CRMPAROLTP, CRMRFCPAR are duly filled in R/3 system.
2. Endure that SMOFPARSFA table is duly filled in SRM system.
3. Maintain the filter settings using R3AC3 and R3AC1 as per your requirement in SRM system.
4. Set up the Administrative console using SMOEAC and create both R/3 and SRM nodes and define the site attributes.
5. Ensure that all the queues (both inbound and outbound) are empty in both the systems before replication.
6. Start initial load of customizing objects (DNL_CUST_BASIS3, DNL_CUST_PROD0 & DNL_CUST_PROD1) using R3AS and monitor the loaded jobs using R3AM1.
7. After successful replication of customizing objects, load the business objects (material_master, service master) using R3AS.
8. The replicated material groups and product types can be seen using COMM_HIERARCHY txn.
9. The replicated materials can be seen using COMMPR01.
Hope this makes you more clear about the settings required.
Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja -
Query Regarding Default Product category set up in SRM server
HI SAp Gurus,
Plesae note that I have created one dummy product category - Test under R3MATCLASS using TC - COMM_HIERARCHY and set in the extended attribute of the root organization level.
Also done the validation in BBP_DOC_CHECK _BADI.
In SRM portal it is reflecting the text as *Please select a product category from list* in Category field as I set in SRM server.
But when I try to select "Add To Shopping Cart" Button it displays the following error messages that -
1) Enter A comapny Code
2) Enter a unit of measure
3) Plant for follow-on document missing
4) System FCSCLNT110 of purch. organization M&S Purchasing Organisation differs from doc. reference FSSCLNT480
5) Error in account assignment for item 1
6) Error calling META BAPI META_CALCULATE_TAX
7) Not possible to calculate tax
8) Error occurred calling META_BAPI_DISPATCH
9) The cost center has not been assigned in the account assignment
When I select the valid product category which is replicated to SRM from ECC , it does not display any error message.
I think the dummy product category - Test which I have created directly in SRM is creating the problem . and displays an error message-
System FCSCLNT110 of purch. organization M&S Purchasing Organisation differs from doc. reference FSSCLNT480
I have also check that when i click Add to Shopping Cart Button - The item_check Badi is also triggered . When I set up the break point there for debugging purpose its not triggeing and coming up with the above error messages.
Kindly advice and do the needful.Hi Muthu,
I confirm that have successfully created the dummy product Category at SRM server and maintained in the extended attribute tab at the root organization level.
Bu the new problem raised - a warning message - No authorization to purchase from product category - Test
For that in PFCG TC we are setting up the autorization level as Low for Startegic Purchasing Role.
But even then the great problem is - when i click add to shopping cart button the line item is not created in step 2, since I have selected the dummy product category not the one which is replicated from backend. Otherwise if i select the one which is replicated from ECC its showing me the one line item in the next screen.
Can any one please advice. -
Hi Guys,
I want to replicate the product category from ECC to the SRM system, can you please tell me the steps to do this?
Also is it possible to have both the long and short description from material group in ECC to SRM system?
Thanks in advance.
Regrds,
sidHi
Please look in to Merchi's wonderful blog and sap notes 720819
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
regards
Muthu -
Product Category Rules in Shopping Cart
Hi All,
Currently trying to figure out the logic behind how the SRM system fills in the Product Category field in the Shopping Cart when taking an item from a Punch-Out Catalog. From what I've researched so far, how it is supposed to work is:
If a valid value is passed through NEW_ITEM-MATGROUP[n] then SRM should populate this.
If no value is passed then default value maintained in Ext. Attributes of Org. Structure is taken.
Are there any other rules that I'm missing? What if the catalog passes a valid Product ID, but no Product Category, will the system take the associated Product Category from COMMPR01, or will it take the default from org structure? In our tests we found that is taking the default from org structure, and I'm not sure if this is a bug, standard, or configuration issue.
Regards,
Andrew BondarevHi Richardo,
Thanks for the response. We have already checked the table, and it doens't seem that there are duplicate entries for the Product Category.
We did just have a breakthrough though in that if we supress the fields NEW_ITEM-ext_schema_type and NEW_ITEMEXT_CATEGORY_ID[n], then the proper value is populated in SRM.
Note: We are performing the mapping on the APC side, so the value in NEW_ITEM-MATGROUP[n] is already the Product Category found in COMM_HIERARCHY. No mapping should be needed in SRM. I'm guessing that by passing a schema type and ext. category ID, SRM is looking for some mapping in SRM, but can't find it so it uses the value in the Org. Structure.
Now the issue is figuring out how to allow for the values for Schema and Ext.Category to still be passed from APC, but have SAP ignore them.
Regards,
Andrew -
SRM Product Category replication
Hi,
I have a problem while replicating the product category from SRM 5.0 to R/4 4.7 system. When I run the load the entry is stuck in the queue and the error message says:
The current application triggered a termination with a short dump.
I have reset the status of the queue and tried to execute it again and it gives me the error as "Function module does not exist or Exception raised".
I have checked St22 and SM21 for any system logs, but could not find any.
Can any one please let me know what could be the possible problem.
Ravi GHi Ravi,
1. Notes to be applied:
720819 read&realize and run job BBP_PRODUCT_SETTINGS_MW
872533 read&realize top 1
1049693 incl. attachement
Customizing:
- Error COM_ATTRFRG_GEN056 is related to settype (GUID) assigned to
categories.
- Please delete erroneous ERP: SMQ1 queue R3A* entries and in
SRM: SMQ2 queue R3A* entries, otherwise follow-on loads would fail
(note 872533 top 1).
- Using ta COMM_HIERARCHY, R3PRODSTYP, MAT_ check if
SetType COMM_PR_PUR_1 exists. If not, create it manually
(confirm raising pop-up).
- Apply note 1049693 and run attached job of the note.
Hope this helps,
Kind regards,
Matthew -
SRM product category replication issue
Hi,
I am trying to replicate the product category from ECC to SRM
I have run the R3AS, but no success,
In SRM SMQ2 no entry created
In ECC SMQ1 no entry created
In R3AM1 "DNL_CUST_PROD1" is running status, not changing to green
I also found that
In R3AM1 DNL_CUST_BASIS3 also running and both the status is block
Please help to resolve status.
Thx
JaiHello Roy,
Kindly follow the below steps to resolve the issue here.
1) Maintain the table TBLSYSDEST in both SRM and ERP system with regards to the logical system and Technical and Dialog rfc's.
Also assign the MW_admin in the rfc user.Register the queues with * smqr.
2) Follow the sap note 720819 and maintain all the 5 tables correctly.
3) Before you start the download, you must use transaction SE38 to execute the report BBP_PRODUCT_SETTINGS_MW in the EBP system. In the 'User' field, enter the consumer name that you selected (for example, "SRM").
Select the radio button depending on whether service products should be active or not. The report starts with the default settings in test mode.
4) Ensure that the table CRMATAB in ERP system holds the entries after the step 1. IF it is blank then follow the sap note 1498111 and run the report SMOF_FILL_CRMATAB in SRM.
5) Also check for the R3-Guid in the tables CRMMLSGUID (SRM system) and CRMPRLS (ERP system ). Both should be identical with the logical system.
Kindly abort and load the object again, it should work fine.
Also to replicate the new material groups, you need to trigger the delta load.
Best Regards,
rahul -
Product Category Description Missing
Hello all,
We replicated product category from R/3 to SRM . The problem is, the product category description field is missing for the categories replicated. I had replicated one more just to make sure all data got transferred correctly, but the description is also missing for the single one replicated. How can this be resolved?
Thanks.Hi,
Pls see if the foll note is helpful:
Note 455949 - IMG Customizing switch for merchandise category long text in
Related Notes
749245 - Unicode: Language and currency fields are not filled
365983 - Copy long text during download merchandise category
BR,
Disha.
<b>Pls reward points for useful answers.</b> -
No language in replicate product category
Hi,
I've replicated the product category from SRM to R3, but the language in category in SRM is not filled.
If I run txn COMM_HIERARCHY, in the category replicated from R3, the descriptionts of them are not filled for Spanish language.
Does anybody know the reason?
Thanks in advance.
Best RegardsHi,
See this thread:
Re: Language specific replication of material group description not working SRM
BR,
Disha.
Do reward points for useful answers. -
Product category replication issue
Hi friends,
We are trying to replicate product category from one of our R/3 backend to the SRM box. There is only one product category we have specified in the filters in R3AC3, but DNL_CUST_PROD1 is showing status running from past 3 days.
I would like to point out that the same scenario is working fine for other R/3 backends.
Any idea/suggestion about the reason for this issue in replication process?
Thanks
GauravHi Robin,
We are also expecting some customizing problem as the reason for this issue.
I just want to again point out that Product category replication is working for other R/3 backends. Only one specific R/3 backend is causing this issue.
Can you advise what could be these backend specific settings and where we can verify them?
Thanks
Gaurav -
Issue in product category replication from R/3 to SRM
Mehul G Shah: BACKGROUND:
We are in the process of replicating Material Group from R/3 to SRM
using transaction R3AR2 & R3AR4. Our Pre-Production server got
refreshed recently & this has caused all EBM data inclucing Logical
System & Destination being overwritten with EBP data.
We have maintained middleware paramaters, viz., CRMCONSUM, CRMRFCPAR,
CRMPAROLTP & also TBE11.
We have also maintained sites in CRM Middleware Monitoring Cockpit
using SMWP.
We have also tried after deleting entries in tables CRMPRLS (R/3) &
CRMMLSGUID (EBM) as suggested by SAP note 765018
We have followed steps mentioned in link /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
(But we are not clear about site attributes which needs to maintain as per the CRM Middleware Monitoring Cockpit.)
ISSUE:
Material Group gets replicated to Product Category in SRM. However, the
Product Category gets replicated with Logical System which is not
maintained in EBMHi ,
Thanks 4 ur replay,i have maintained Site attributes,please give me detail of site attributes like which attributes should i maintain ?please give me descriptive answer. -
No authorization to purchase from product category
Hi
I am trying to add an item to the shopping cart. When I press "Add to Shopping cart" the following warning message came.
No authorization to purchase from product category 'Raw Materials'.
How should I assign this authorization to my user name(I have all the admin privilages).
Thanks for your help
VidyaHi
In the transaction PFCG, for the role of Startegic purchaser,under the Personalization tab,set the attribute BBP_WFL_SECURITY to '4'.Also,check the authorisation data for the Strategic purchaser role.
Check by giving SAP_ALL access to the user for time being.
Regards
- Atul
Maybe you are looking for
-
DO NOT Get The Service With This Company IF You Want to Receive a Good Customer Service
It is really a pain, dissatisfaction, and a lot more when you have Verizon as your service provider. I have been having service for my cellphones with Verizon for over 3 years, and did not have any major problems, so when I moved to my new place I th
-
I take a lot of people shots and have way too many out of focus pics.
I have way too many out of focus shots. I usually use tv mode with the shutter set at least 250 with the anti shake on. I know there is a balance of aperature, iso and they seem to be close enough for lighting but the out of focus drives me nuts. T
-
QM _Inspection Lot Creation with Move ment type-542
Dear All, The Business Scenario is when ever goods received from Sub contracting vendor with out any processing by 542 movement type the system should create the Inspection lot automatically. How can achive this function? Your inputs are valuable. R
-
Help me please with Outlook Express address book recovery
I reloaded windows and after restarting I could not find the Outlook Express address book. I looked in my docs and settings/"name"/localsettings/applicationdata/identities. There are a bunch of .DBX files t, but the contacts file is only 59kb. I do
-
Print quality from network printer
poor print quality from HP wireless pc, Windows 7 64-bit, to wired network printer (Epson 500 all in one). Print Quality from desktop pc is great.