"Product/Item" Tab on Activity 0020 - Bus.Act. with Prods

Hi ,
I did create an activity type 0020 - Bus.Act. with Prods  , but cannot see an assigment block the enter the Products/Items ?
Via the SAP GUI , same problem , no way to enter Products/Items .
Regard's

Hello,
The activity management deals with BUSINESS ACTIVITY and TASK.
Here Business Activity means is PUBLIC and TASK is PRIVATE.
The difference between BA and TASK is involvment of Business Partner.
You won't find any PRODUCT/ITEM related ASSIGNMENT block for this TXN Categoery.
Bcz process wise we say that activity doesn't deals with PRODUCT/ITEM.
That is why you can unable to see ASSIGNEMENT BLOCK.

Similar Messages

  • Bus.Activity with Prod. - address tab

    Hi CRM experts,
    i copied the 0020-Bus Act with Prod to my Z type tranx and found that Address tab is missing. Does any one know where in IMG we need to set for Z type trnx to get the address tab in our customize transaction also.
    Thanks
    chap

    Hello,
    The activity management deals with BUSINESS ACTIVITY and TASK.
    Here Business Activity means is PUBLIC and TASK is PRIVATE.
    The difference between BA and TASK is involvment of Business Partner.
    You won't find any PRODUCT/ITEM related ASSIGNMENT block for this TXN Categoery.
    Bcz process wise we say that activity doesn't deals with PRODUCT/ITEM.
    That is why you can unable to see ASSIGNEMENT BLOCK.

  • How do I delete items from "My Activity" from the Community tab..

    How do I delete items from "My Activity" from the Community tab?

    You can't. The streams are uneditable even to the mods and admins. It's an ongoing data collection. You can only hide stuff by marking it as read in the relevant areas like your Inbox.
    Mylenium

  • How to add new fields to CRM contract Product List tab?

    Hi all!
    I would like to add a new custom field for CRM contract (CRMD_BUS2000121) item level, on the Product List tab.
    Here I found CRMT_0100A_ORDPRP_I_EXT_UI structure, therefore I enhanced this with new append structure and new fields.
    I also added the new fields to ORDPRP_I append structure and mapped the new fields in CRMC_MAP.
    For some reason the new fields are on the screen but they are grey, not changeable. What did I do wrong?
    Thanks,
    Tamas Pentek

    Actually for the new IC webclient UI you have need to take a look at your options:
    1.  New Installation:
    Use the EEWB and add the fields.  As part of the EEWB work, you will have a couple of post-processing steps where you will add your generated fields to the new screens.  However this doesn't require any programming.
    2.  Upgrade from CRM 4.0/50
    - New fields to add as part of upgrade
    See the directions for new installation
    - Existing fields to add as part of upgrade
    --See the blog on the 40/52 CUSTOMER_H migration for transaction fields
    --Business Partner fields part of BUT000 available via UI configuration tool, no extra work needed
    --Business Partner fields part of tabular extension, manual work required, I am still "perfecting" this method and plan on writing a blog once I have the technique finished.
    --Product Attributes - use the transaction CRMM_UI_PROD_GEN and CRMM_UIU_PROD_CONFIG
    I know CRM 2007 is based on the same tech foundation as 2006s, with some differences in how the UI tool works and the fact there are some screen layout changes(editable overviews).  The extension procedures are generally the same.  I can answer some of you extension questions based on my work with CRM 52 so far.  It will generally apply to your situation.
    BTW:  The PCUI is no longer supported in CRM 2006s and above.  Even the old SAP GUI transactions such as BP, COMM_PRODUCT are removed from the standard CRM menu.   The SAP CRM web client should be used instead now.
    Take care,
    Stephen

  • Regarding GL item tab in MIRO transaction

    Hi
    I am working on MIRO transaction.
    In GL Item tab, if we enter Account number it has to be
    checked with ZMMTABLE and display error if not available.
    In Ztable we have company code, account number(SAKNR) and ZFLG as key.
    need to fetch by key.
    How to fetch company code and account number from screen?
    I am using BADI INVOICE_UPDATE, CHANGE_AT_SAVE method.
    WHen i clic save button in MIRO transaction, the BADI is not triggered.
    I have implementation active and made break point too.
    I tried displaying invoice document in MIRO , changed the amount and clicked save button. but BADI is not triggered
    Can you tell me how to debug bad? i put break point in BADI method and opened session then execute MIRO.
    Pls advice how to go with.
    Regards
    Chandra
    Edited by: princeck on Sep 20, 2011 3:14 PM
    Edited by: princeck on Sep 20, 2011 4:11 PM

    Hi
    I want to access GL item tab account number from MIRO transaction to BADIINVOICE_BADI Method CHANGE_AT_SAVE. I entered the account number in GL account tnumber tab. but parameter TI_RBCO_NEW-BUKRS & TI_RBCO_OLD-BUKRS values are empty inside BADI method.
    Can you suggest me how to find this.
    Regards
    Chandra
    Edited by: princeck on Oct 3, 2011 2:32 PM

  • Adding a new field extension on CRM Order Item tab in the web shop order

    Hi CRM E-Commerce Gurus,
    I want to add a extension field on any web site product such as "zz...." in order to use this data in order's item tab. What shoul I do on J2EE Stack-.jsp method and ABAP Stack at the BADI implementations.
    Could you please help me in order to add a new field extension on CRM Order Item tab in the web shop order ?
    Thanks,
    Kind Regards,
    Fahrettin

    Hi Arshi,
    We have could not find any java action class such as Maintainb2csaveorderaction in config.xml folder and also there is no available threads and clue on SDN, google etc. Therefore we are got stucked on this issue. In SAP_ISA_60 Development and Extension Guide of SAP E-Commerce there is no sample java action class code such as Maintainb2csaveorderaction but some ABAP codes are available for the extension structure.
    Do you suggest any java action class such as Maintainb2csaveorderaction codes like in your B2B scenarios etc.?
    ls_header is a local structure with header data
      ls_extension-ref_guid = ls_header-guid.   
      ls_extension-alt_handle = ls_header-handle.
    extension are name value pairs
      ls_extension-name = u2018Z_CUSTOMER1u2019          u2018 name
      ls_extension-value = ls_header-zcustomer1. u2018 value
      APPEND ls_extension to extension_header_out
    now adding extensions to the items
      LOOP AT lt_items INTO ls_item.
        ls_extension-ref_guid = ls_item-guid.
        ls_extension-alt_handle = ls_item-handle.
        ls_extension-name = u2018Z_CUSTOMER2u2019          u2018name
        ls_extension-value = ls_item-zcustomer2.   u2018value
        APPEND ls_extension to extension_item_out 
      ENDLOOP.
    ls_header is a local structure with header data
      LOOP AT extension_header_in INTO ls_extension.
    check the name to find the according field
          IF ls_extension-name = u2018Z_CUSTOMER1u2019.
            ls_header-zcustomer1 = ls_extension-value.
          ENDIF.
      ENDLOOP.
    sort the extension table by ref_guid and handle to obtain a better access
    with binary search.
      SORT extension_item_in BY ref_guid, alt_handle.
      LOOP AT lt_items INTO ls_item.
    find the starting point for a loop over extensions
    use guid and handle as one logical key to access the extension
        READ TABLE extension_item_in
          WITH KEY ref_guid = ls_item-guid
                   alt_handle = ls_item-handle
                   BINARY SEARCH.
        IF SY-SUBRC = 0.
          LOOP AT extension_item_in INTO ls_extension
            FROM SY-TABIX.
    check, if the entry is relevant
            IF NOT    ls_extension-ref_guid = ls_item-guid
               OR NOT ls_extension-alt_handle = ls_item-handle.
               BREAK.
            ENDIF.  
            IF ls_extension-key = u2018Z_CUSTOMER2u2019.
              ls_item-zcustomer2 = ls_extension-value.
            ENDIF.
          ENDLOOP.
        ENDIF.     
      ENDLOOP.
    Thanks
    Kind Regards,
    Fahrettin

  • SCSM 2012 Forms (related items tab)

    Hi,
    We are using SCSM in our Production environment. I have a question about the "Select Object" function on Related Items Tab. When we  click on Add button on Related Items Tab under (lets say) "Configuration Items: Computer, Services and
    People" section, it opens a "Select Objects" dialog box with a list of option. Some of these options are not useful to us as we are not using them or may not plan to use in future. For example under the "Select Objects" dialog
    box  the‘object type’ list contains Database twice (as well as another option as Databases) which makes it difficult to search for the appropriate Database CI. Is there a way the "non used" option can be removed from this drop down list?
    Please advise. Any help will be appreciated.
    Thanks

    You would have to write your own dialog box. It is called a LaunchAddInstancePickerDialog (found in Microsoft.EnterpriseManagement.ServiceManager.Application.dll). You can tell it to provide a list based on a type (ex. Config Item) and a selected class (ex.
    computers). And that is just one of the overloads.
    You would then have to replace the button which triggers the dialog. Also not too difficult. I think
    this post by Rob Ford is actually the best reference (I can find as of now).
    If you haven't coded before this is massive undertaking. I you have, then it is advantageous to have C# experience. And still you should expect hours of Work to wrap your head around this.
    http://codebeaver.blogspot.dk/

  • Opportunity creation: product item category not permitted

    Hi SAP Gurus,
    After some difficulties, we succeeded in transfering products from R/3 to CRM.
    Now we would like to create an opportunity, associated with a customer and a product (in fact consultant services).
    In the 'Products' tab of the opportunity creation, we have to fill the field 'item category'. Whatever we type in it, we have always the same error 'The item category XXXX is not permitted for product YYYY'.
    Do we have any configuration to do or to import from R/3, concerning item category? How could we bypass this error?
    Thanks for your help
    Anne

    First check which item category group your products use. then:
    SPRO->CRM->transactions->basic settings
    Define Item Categories, refered to an opportunity item.
    Then Define Item Category Determination. Add a line with transaction type OPPT and your item category group.
    Anne

  • Product /item proposal

    Hello friends !!
    I have assigned a product /item proposal to a customer .
    I have mark the material deleted ( through MM06)
    Now I create a sales order with ref to this product /item proposal .
    I donu2019t get the  information message : - Material AXMAT-SKK is marked for deletion
    I can get this only when I enter this material directly to the item line .
    can you help me ?
    Regards,
    O

    Hi
    Instead of deleting the material at the client level in MM06, go to MM02 Sales Org1 Tab in Dist chain specific status enter the relevant option & enter the validity date & save the material.
    Once this is done even for item proposal you cannot raise an order.
    Hope this will help you.
    Thanks & Regards
    Aravind

  • Change description of the Excise item tab in MIGO

    Hi,
    We have upgraded R3 4.7 to ECC 6.0 now we required in MIGO transaction Excise Item tab Indicator for Material type we need to change the description of this as RAW MATERIAL to INPUT MATERIAL and Consumable to Capital Goods which is in R3 4.7
    Please suggest me any config.
    Thanks
    Shital D

    Hi,
    The above material type showing in MIGO screen, as you already declared the material under which material category in J1ID & so then value flowing.
    You can not change here  &  you have few options to declared the material under which material categories.
    You can keep all raw material as raw material & Consumable as asset.
    But if your business needed very much, Just have a discuss with ABAPer for your requirement.
    Regards,
    Biju K

  • ISSUE:regarding production version tab of MRP4 of  data transfer using BD10

    Hi all,
    This is regarding production version tab of MRP4 of  data transfer using ALE idoc (BD10).
    When i transfer the data using BD10 the production version is received at receiving end through segment
    but not created in MRP4 view tab.An error is coming as-
    "You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
    I logged in as-EBGABAP
    Please help me resolve the issue.
    Thanks
    Edited by: sanu debu on May 6, 2009 11:08 AM
    Edited by: sanu debu on May 6, 2009 11:09 AM
    Edited by: sanu debu on May 6, 2009 11:11 AM

    >
    sanu debu wrote:
    > Hi,
    > I have to upload production version tab data of  MRP4 view(MM01).Please suggest a function  moduleor bapi  for the same.
    >
    > Thanks.
    >
    > Edited by: sanu debu on May 6, 2009 3:24 PM
    BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

  • Sales Analysis Item Tab Function Not Showing Orders Dollars

    Hello Gurus of SAP B1.
    This pertains to SAP B1 SP 00 PL 16 Version 8.8. 
    While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'.  The system does display the proper dollars when I select "Invoices" on the "Item" Tab. 
    And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???
    Does anyone know why this might be happening and/or how to fix this???
    Thanks in Advnace - Zal

    Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
    Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting.  My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also.  I am certain I have done it before in SAP 2007A...
    Has there been a change to the item/sales order table in Version 8.8???
    Take care my FFF - Zal

  • Sales Analysis Item Tab Displays Zero Dollars for "Orders"

    This pertains to SAP B1 SP 00 PL 16 Version 8.8.
    While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
    And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???  Strange that a button would be displayed which does not work...
    Does anyone know why this might be happening and/or how to fix this???
    Does SAP plan on fixing this in any upcoming patch levels???
    Regards - Zal
    Responses received from SAP B1 Core Forum:
    Sales Analysis Item Tab Function Not Showing Orders Dollars

    Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
    Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting.  My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also.  I am certain I have done it before in SAP 2007A...
    Has there been a change to the item/sales order table in Version 8.8???
    Take care my FFF - Zal

  • Query to mimic the items tab of the Sales Analysis report.

    Hi there,
    I'm currently looking to create a query that mimics the behaviour of the Sales Analysis report in B1. The items tab of the Sales Analysis report provides all the data I require - the only issue is that I would like to merge this data with some other data regarding current on hand stock quantities etc. and therefore I would like to be able to pull out the query behind the Sales Analysis report.
    I'm assuming this cannot be done and therefore I'm attempting to build a query to replicate the results. The query needs to show Item No, Item Description, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for items within a given period.
    If this can be done relatively easily, can the query then be modified to show all items (including items that haven't sold in the date range) merely with '0' for Quantity Sold, Sales Amt etc. if the item hasn't been sold in the period, and the appropriate figures if each of these columns if the item has sold. I assume some kind of CASE statement can be used to generate this.
    So the query needs to show Item No, Item Description, Current quantity in stock, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for all items within a given date range.
    I hope you can assist me with this problem.
    Thanks
    Grant.

    Hi,
    Thanks Gordon that was exactly what I needed.
    I've been trying to add some additional columns to the query but I'm experiencing some errors and I can't quite tell why.
    Basically, here's the code from another working query I have which I wish to merge into the query you've suggested above:
    SELECT T0.[ItemCode],
    T0.[ItemName],
    T3.[ItmsGrpNam],
    T4.[Name] AS [Sub-Category],
    T5.[Name] AS [Sub-Sub-Category],
    T0.[CardCode] AS [Pref Supplier],
    T6.[FirmName] AS [Brand],
    T0.[U_Range],
    T0.[OnHand],
    CASE WHEN T0.[StockValue] = 0 THEN 0 ELSE T0.[StockValue] END AS [StockValue],
    T1.[Price] AS [PBK GBP Price],
    CASE WHEN T0.[OnHand] = 0 THEN T0.[LastPurPrc] ELSE T0.[StockValue]/T0.[OnHand] END AS [Ave Cost],
    CASE WHEN T0.[OnHand] = 0 THEN T1.[Price]-T0.[LastPurPrc] ELSE CASE WHEN T0.[OnHand] > 0 THEN T1.[Price]-T0.[StockValue]/T0.[OnHand] END END AS [Margin],
    CASE WHEN T0.[OnHand] = 0 AND T0.[LastPurPrc] = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] > 0 AND (T0.[StockValue]/T0.[OnHand]) = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] = 0 THEN (T1.[Price]-T0.[LastPurPrc])/T1.[Price]*100 ELSE CASE WHEN T0.[OnHand] > 0 THEN (T1.[Price]-T0.[StockValue]/T0.[OnHand])/T1.[Price]*100 END END END END AS [Margin %],
    T0.[LastPurPrc]
    FROM [dbo].[OITM]  T0 INNER JOIN [dbo].[ITM1]  T1 ON T0.ItemCode = T1.ItemCode INNER JOIN [dbo].[OITB]  T3 ON T0.ItmsGrpCod = T3.ItmsGrpCod LEFT OUTER JOIN [dbo].[@U_SUBCATEGORY]  T4 ON T0.U_Subcategory = T4.Code LEFT OUTER JOIN [dbo].[@U_SUBSUBCATEGORY]  T5 ON T0.U_SubSubCategory = T5.Code INNER JOIN OMRC T6 ON T0.FirmCode = T6.FirmCode
    WHERE T0.[OnHand] >= 0 and T0.U_Range not in ('E','X')  
    ORDER BY T0.[ItemCode]
    Essentially I just wish to add the fields which are specified in the query above, but not in the query you've already suggested:
    SELECT T0.ItemCode,
    Max(T0.ItemName),
    Max(IsNull(T0.OnHand,0)) 'In Stock',
    SUM(IsNull(T1.Quantity,0)) 'Quantity',
    Sum(IsNull(T1.LineTotal,0)) 'Sales Amt',
    SUM(IsNull(T1.GrssProfit,0)) 'Gross Profit',
    Case WHEN Sum(Isnull(T1.LineTotal,0)) = 0 THEN 0 ELSE
    SUM(IsNUll(T1.GrssProfit,0))/Sum(Isnull(T1.LineTotal,0)) * 100 END 'Gross Profit %'
    FROM dbo.OITM T0
    LEFT JOIN dbo.INV1 T1 ON T1.ItemCode=T0.ItemCode
    LEFT JOIN dbo.OINV T2 ON T2.DocEntry=T1.DocEntry AND T2.DocDate Between [%0] AND [%1]
    GROUP BY T0.ItemCode
    I was hoping it would be fairly straight forward but so far I've had limited success.
    What am I missing here?
    Thanks in advance!

  • No signals appear in Signals tab of NI-XNET Bus Monitor

    Hi, I am trying to use a NI 9862 USB to read a J1939 PGN.  I will choose PGN 65265 (CCVS1), SPN 84 (Wheel Based Vehicle Speed) as an example.  In the Monitor tab of NI-XNET Bus Monitor, I can see that the Frame counter is increasing at the expected rate for that ID, and the Frame Name column is filled in with my custom text.  A couple weeks ago, I was able to click on the Signals tab and see the payload for the Signal I had defined listed converted to engineering units.  Now, nothing is appearing in the Signals tab.  I have used Add/Remove Signals to select the signal of interest to list in the "Signals in View".  Any ideas?  I did recently swap out a bad NI 9862 for a new one, but I don't see how that would be related to this issue.
    Solved!
    Go to Solution.

    Hello barkeram
    If you are at the add/remove signals, when you select names to search=signals, Are you getting results?
    Is the frame view still working fine? did you change any setting like Interface and Database?
    Regards
    Frank R.

Maybe you are looking for