Product modelling environment(PME)

Gurus,
Can someone explain about Product modelling environment.Your inputs will be of great help.
Thanks
Andy

Have you checked this <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/ad4540d1b79523e10000000a1550b0/content.htm">SAP Help</a>?
~Suresh

Similar Messages

  • Product Modelling Environment - Variant Configuration- modelling configura

    Hello all,
    I have a very important question for which I am trying to find answers. I ahve been researching for the last 2 days continuously
    and now I kind of confused.
    I need an answer tot his at the earliest possible
    And I am struggling to differentiate between PME and product modelling in crm , is it the same?
    When Ilook in this link ,it says;
    http://help.sap.com/saphelp_crm70/helpdata/en/ed/bfb2ce6a6a46af92172c4ff901f125/frameset.htm
    NOTE
    This function in the WebClient user interface (UI) replaces the Product Modeling Environment (PME) application, which had to be installed separately.
    What does this mean?? does this mean that modelling configurable products is different from PME?
    can Product modelling be done in crm as well as ERP?
    Could u please let me know
    Thank you
    BR
    Riya

    Hi Vinod,
    Please find below a brief:-
    A product model contains the configuration model data relevant for one product which is a server based Architecture.
    -A knowledge base is a container for data and can contain many PMEs
    -PME is available in Product page
    -Need to insert and create a new product model and select the model and enter product related data.
    -Create KB's
    -Will have to define the characterstics and values and assign to class
    -Product model hierarchy shows the model in tree structure.
    -After you created the hierarchy with all details you can simulate the configuration as a result titile simulator pops up where you can see the status and Variants and your current selection.
    Regds...
    Arup

  • Accessing the Product Model in PME

    Hi All,
    I am facing an issue related to PME, I have created a configurable product in CRM. The  issue is when i  clicked on create button in the configuration tab of commpr01 , PME starts and establishes connection with the respective client but it is not showing me the model name and the configurable product which i already  made nor i am able to see the other categories and product type.
    Can any body help me out.
    Full points will be rewarded.
    Thanks and Regards,
    Shweta
    Edited by: Shweta gupta on Feb 18, 2008 11:24 AM

    Hi Muralidhar,
    I think that note is not applicable for me, because it is giving corrections for some UAMO tcode which is not applicable for me. I am specifically facing problem when creating a new model from PME. It is not displaying me my model name nor enabling options to add product.
    Please suggest something useful.
    Regards,
    Shweta

  • Product moduling environment(PME)

    hi,
    Can anyboby help me in getting SAP CRM PME(product moduling environment) best practice material.
    thanks
    Sudhakar

    Have you checked this <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/ad4540d1b79523e10000000a1550b0/content.htm">SAP Help</a>?
    ~Suresh

  • Product Modelling Environment - Variant Configuration

    Hi Experts,
    Can any one please let me know how to use PME for Variant configuration in CRM. If possible can any one please give me  document or link related to PME.
    Thanks in advance,
    Regards
    Vinod

    Hi Vinod,
    Please find below a brief:-
    A product model contains the configuration model data relevant for one product which is a server based Architecture.
    -A knowledge base is a container for data and can contain many PMEs
    -PME is available in Product page
    -Need to insert and create a new product model and select the model and enter product related data.
    -Create KB's
    -Will have to define the characterstics and values and assign to class
    -Product model hierarchy shows the model in tree structure.
    -After you created the hierarchy with all details you can simulate the configuration as a result titile simulator pops up where you can see the status and Variants and your current selection.
    Regds...
    Arup

  • Cookbook Creating Product Models

    Hi all,
    I am trying to create product models for SAP CRM 5.0 using PME 4.0. I tried to look for information about product models and came across with the following <a href="http://help.sap.com/saphelp_crm50/helpdata/en/e4/f7be59035c8a4b951d3e400955c97f/frameset.htm">URL</a>. I tried to follow this guide but I am having trouble setting up domains.
    I was wondering if there is a cookbook with examples available that could help me setup product models which I can use for the configurable products.
    Kind regards,
    Huseyin Kara
    System Programmer
    [email protected]
    Message was edited by:
            Huseyin Kara

    I have the same problem as Huseyin.
    Is there someone who knows more about the subject?
    Kinds regards,
    Robbert de Zwaan

  • Product created in PME

    hi! ppl,
    When i try to create a product directly in PME it give me an error:
    "class com.sap.pme.service.exc.exc_conn_ext: RFC_ERROR_SYSTEM_FAILURE..
    Regards,
    Diana.

    Hi Diana,
    Please refer the following SAP Note for your information:
    <b>SAP Note: 1057548</b>
    Please reward points if it helps
    Best Regards,
    Johnny.

  • How to Copy Production/Live Environment Data into Staging Environment?

    I have been given the task to go into the Production/Live Environment within SharePoint and copy the data and place it into the staging environment. I have been told the Staging data is older. 
    I have no idea how to do this. The Staging Environment uses different site collection URLs. I only want to copy the data so links and everything wont take me to the production site. 
    I am a new admin.

    Hi,
    If you just copy a site collection from Production environment to Staging environment, you can backup the site collection in Production then restore in Staging.
    Back up a site collection:
    https://technet.microsoft.com/en-us/library/ee748609(v=office.14).aspx
    Restore a site collection:
    https://technet.microsoft.com/en-us/library/ee748630(v=office.14).aspx
    If the web application only has this site collection or you want to copy the web application, you can deattach the database of the web application in Production then attach it in Staging.
    Or, you can find a third party tool to do it.
    Thanks,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Bapi for Assign a Location Product - Model in SCM 4.1.

    Hi,
    I need a BAPI / FM to Assign a Location Product - Model in SCM 4.1. Can any body give me the info regarding this.
    Thanks in advance for your help.
    Saisdhar

    Hi,
    please have a look at note 865361. Please use Userexit CIFPPM01.
    In the note you'll find a sample coding for the locations.
    regards
    Joerg

  • Let's ask HP to categorize support forum for every product model or at least every model series

    Hi all HP fans!
    I really wonder why not HP Support Forum is not categorized by every product model or at least model series to help customers post issues in apropriate group and helpers don't get confused in thousands of unrelated questions.
     Regards
    AlizzA

    Because they don't care...
    I've been a service tech for 18 years repairing HP products, from Laserjets to Designjets and I used their technical support web site and phone support for help when I was stuck.
    In the early years Tech Support was great! They were a knowledgeable and helpful team of bright people.
    This was when HP had direction and vision.
    They cared about the customer, the customer's satisfaction and the companies image.
    Not any more.
    Just look at the piles and piles of ticked off people ranting about HP's Customer Support...it's shameful!
    HP pumps out new products faster than ever, dropping support for relatively new products and leaving customers and 3rd party support providers out in the cold.
    They put up self-help websites like this one to make themselves feel better.
    We've moved on to Canon products and let me tell you...we've never looked back!
    Customer and tech support are second to none as well as the products!
    Message Edited by MudSlinger7 on 11-02-2009 05:24 PM

  • 'Sensible' Definition & Security settings for a Production APEX environment

    Hi Folks.
    What's the feeling on Definition and Security settings for a production APEX application?
    Here are my settings for my UAT environment (not quite in production just yet)
    Debugging: NO
    Status: AVAILABLE
    Build Status: RUN APPLICATION ONLY
    Authorization Scheme : MUST NOT BE PUBLIC USER
    Session State Protection: ENABLED
    In the APEX Administration setup, access to my site is restricted by IP also. As a consequence I think it's buttoned down quite tightly but, eventually, we plan to open this up to the Big Bad Web!!
    What are your thoughts on the pro's and con's, the why's and wherefore's of one setting or another.
    I'm hoping this thread will prove to be a good forum for discussing APEX application security configurations and a reference for others.
    Please feel free to link to whitepapers of relevance.
    Maybe someone could take up the challenge of producing an 'UNHACKABLE' :-) APEX website?
    Simon.

    Hi Simon,
    If you're just talking about instance settings, then you might also add to that using the 3.1 runtime only instance.
    If we're opening it up to application design, well...that's a whole other matter ;)
    John.
    http://jes.blogs.shellprompt.net
    http://www.apex-evangelists.com

  • U510: No WiDi, and Veriface on US production models??

    Lenovo - what is going on? You are selling products that either don't work properly (see the touchpad or WiFi threads), or aren't being delivered as promised (see the missing software and Widi threads).
    I just got through reading the software threads and decided to take a look at my U510. According to the tech specs here, the U510 comes with Windows 8 x64, WiDi, and Veriface - none of which are present on US models of the U510 (except the Win 8, that is). In fact, the only Intel apps on my system are the driver utilites for the WiFi and HD4000, and the Intel AppUp application which appears to be nothing more than another app store.
    I've decided - you can have this thing back, and the new one you're shipping me. I want nothing to do with the "new" Lenovo - your support has gone the way of Dell. Such a sad end to the IBM Thinkpads - they were once the best money could buy.
    Moderator Note: Edited subject to match content.

    While browsing through the dirvers area of the site yesterday looking to see if there were any updates, I discovered the Intel WiDi driver and the Intel Chipset driver - neither of which were installed by default.
    Installation of the WiDi went smoothly, and appears to work, but I have not tested it yet since I don't have a WiDi receiver yet.
    While installing the Intel Chipset driver package, the window reported that Intel Identity Protection had been installed. I'm still looking to see where it stuck it, and see what it can do for me. I'm going to try and find the W7 Veriface package for the Y or Z series and see if it will work on the U510 with W8 and the Intel Identity Protection loaded.

  • Quality on latest production models??

    Is there any concensus as to the whine and / or build quality on the latest production runs for the MB???
    Thanks

    I hope I am not typical, but I'm on my third 1.83 MacBook. I've returned two week 29 machines, the first one had blemishes on the screen, out of the box. The second (also week 29) had a mushy trackpad button and an apple key that would get stuck down. The third is a week 30. It runs much hotter than the last one and the page down key doesn't work unless you press just so. I've also had kernel panics, something I've not had before. I'm still on the fence on taking this one back, but if I do I may just return it. It is for my wife (I'm waiting for MY MacBook to come back from repair) and she doesn't need the hassle.
    MacBook 2GHz   Mac OS X (10.4.7)   Mac mini (G4)/iBook G3

  • Deploying Settings for Creative Suite Products - network environment with redirected folders

    Hi there.  We have some deployment questions regarding settings for the Adobe Master Collection.  Because we have redirected folders for my docs, etc., they are located on our file server for all of our users (school environment).  The problem is all Adobe programs default their save and caching locations to the my docs folder, which is on the server and causes slow downs and network traffic issues.  Is there a way to set these with a file or a deployment option, or what options do we have?

    This stuff is stored in the prefs of the programs and unless you go in and change each of the prefs files there is no way to change this.
    Mylenium

  • Cisco and Linksys products mixed environment

    Hello All,
    Before I ask my question, I would like to know if it's OK to ask questions regarding both Cisco and Linksys products in this forum, or if this forum is just for Cisco OR Linksys? I just want to make sure before I ask my question.
    The devices we are talking about are UC520, Catalyst Express 520 Switch, and 2 Linksys SRW224P Switches.
    Thank you!

    Thanks for your response, I can now describe my problem....
    We are using the UC520 as a PBX System, VPN Server, and what-have-you. On the expansion port, we connected the CE520 Switch, and we have many phones, and some other devices connected to it. Now, on ports 5 and 6 of the UC520, we connected the 2 Linksys Switches we've had for a couple of years now. Anyway, on these switches we have a few computers connected, but what I am having problems is 8 IP Cameras (PVC2300 also by Linksys). What we wanted to do was to create a new VLAN (2) on the UC520 to house these IP Cameras (all of which have static IP addresses in the subnet 192.168.0.1/24). We need the office manager's laptop to be able to see the cameras, but this laptop is in VLAN 1 (192.168.10.1/24). I opened up at  case with TAC and they helped me create the VLAN and all this, and now they said it should all be working OK, except it's not, and they said it has to do with the Linksys switches (which they can't provide support for). I am not a networking wizard, I consider myself a very basic IT guy when it comes to this, so I am not sure what I'm supposed to do on the switches to have them communicate correctly with the UC520 and VLAN 1 and 2. Right now, the computers connected to the Linksys Switches are actually in VLAN 1, and can access the IP Phones Web GUI, so I don't know why this new VLAN is not visible by the Data VLAN.
    I hope I am clear, and if you have any questions I will be glad to answer them.
    Thanks for any help provided!!
    Our topology is something like this:
                   CE520 on Expansion port ------ Mostly phones and a few computers
                   |
                   |
    Internet---UC520 ----- SRW224P Switch on UC520 port 5 ------ IP Cameras and a bunch of computer/network devices
                   |
                   |
                   |
                   SRW224P Switch on UC520 port 6 -------- IP Cameras and a couple of computers

Maybe you are looking for