Product selection during TLB run with SCM 701 (EHP1)

Dear All,
We are on SCM 700 with EHP1.
I have activated the business frame work function using txn: SFW5 - SCM_APO_DP_SNP_CTM to include the product selection during TLB run. But I observed that product selection has appeared only in the TLB run (txn: /SAPAPO/SNP04) for background selection but not in the Interactive TLB run (/SAPAPO/SNPTLB).
How can get the product selection in Interactive TLB selection as well so that multiple planners can use the TLB sessions at the same time as long as products are not same.
Please advise & thanks in advance
Venkat DR

Hello Venkat,
I do not see the business function SCM_APO_DP_SNP_CTM when I open the txn SFW5. It only shows me enterprise business functions, which has ony CA, ERP, Financial functions. But not the ones I needed.
Can you pls tell me how to see that function ? And why these functionalities given to be activated in SCM 7.0 ?
Thanks
Venkat

Similar Messages

  • BOM selection during MRP running

    Hi,
       I have a question about BOM selection during MRP running...
       I have three production version and all of them are valid at the same time..I get a problem "no BOM data seletion" during MRP
    running..I suspect it is due to that I have three production version and MRP didn't know take which one..Can anyone tell me
    where can i config it or what's wrong with it in my situation?
       btw,BOM usage and stats are correct .so is the router data..since MRP is running well if i only have one PV..thanks..

    Hi Monst,
    Looking at the screenshots you uploaded, it seems that the validity of each of the production version is from 7.12.2011 to 1.12.2012.
    Please check whether for Planned order no. 36659 alternative BOM no. 1 is getting selected (Since BOM selection ID is 2).
    For planned order nos. 36660, 36661 and 36662, the start date is perhaps before 7.12.2011 and end date as we can see lies in the validity period of production version. Hence, neither of the alternatives of the BOM is getting selected.
    For verifying the above logic, please make the BOM selection method as 3 (selection only by production version) and run the MRP. I think MRP will get terminated in this case since no BOM will be chosen for first planned order.
    Just in case u need to select the BOM for planned orders, you can manually enter the production version no. in the planned order change mode.
    Please tell if this helps and revert back.
    Regards,
    Chetan.

  • Selection of Production version during MRP run

    Hello experts
    At present I am having 2 production versions for a material code as PV01 and MV01.
    By putting validity date I am restricting correct version to be picked in MRP.
    Is there any other way, for example in material master where if I maintain the production version, then MRP should pick that only.
    Please suggest the best way.
    Regards
    Pradipta Sahoo

    Dear Pradipata,
    If you are having more than one production version for a material for the same Lot size and validity
    dates,and if you have given BOM selection method as 2 in MRP4 view,then always the system picks up
    the first production version defaultly.
    If you want the system to pick up the second production version in that case means,you have to lock
    the first production in MM02 or C223.
    Check and revert back.
    Regards
    Mangalraj.S

  • Automatic Product Selection item value not updated in S067

    Hello,
    We have a requirement for Automatic product selection based on ATP with pricing at item level. This is working fine.
    But the value of the subitem is not updated in open delivery value S067 after saving the delivery.
    The item category is marked as credit active. update group is 15.
    If i do main item pricing then the value is getting updated successfully.
    I check several notes but nothing helped.
    Pls. help.
    Regards,
    Praveen

    assigned it in sales order at item level in Billing tab
    Assign the same at header level billing tab in sale order.
    thanks
    G. Lakshmipathi

  • Manual selection production version during order creation

    hello!
    i have setup production orders that during order creation the production version has to be selected manually. this works fine in CO01 and CO40. but in CO41 the production version is determined automatically - where would i change that setting?
    best regards,
    matthias

    Dear Matthias,
    In my understanding it is not possible in standard SAP.
    If you have manual selection of production version and if you have set the BOM selection method as 2 in
    MRP 4 view of the material master then,
    1.If you create a production order manually then the system displays the pop up to select a production
    version.
    2.If you are converting the planned order into a production order then it picks up the one which is
    present in the planned order.So obviously if 2 production versions are there with same lot size and
    validity dates,then the system picksup the first one only during MRP run.
    Even if it picks up the first prod.version in planned order,but while converting click on master data and
    change the production version if required.
    3.Otherwise what you can do is set the production version in MD61 itself ,so that its going to be
    considered during MRP run and same will be included in the planned order.
    Check and revert back.
    Regards
    Mangalraj.S

  • Time Capsule only runs with 1,1Mbit up/down during data transfer, internet speed is ok, TC is used to extend an existing network

    Hello Everyone,
    I have a new 2TB Time Capsule running with a MacBook Air. I want to use the TC to access data (Aperture library, iTunes library, other Files) and to backup my MacBook Air via Time Machine. I set it up, integrated the TC in my Network (FritzBox) by choosing "extend existing network" and it works. BUT only with 1.1Mbit/second while writing or reading Data to/from it. Internet speed is very good, like it was before. While the 1.1Mbit/second seem to be ok with Aperture and iTunes (streaming music and movies) it is still painfully slow and I'm not realy happy with that
    I've read that:
    The 1.1Mbit problem is pretty common when Time Capsule is integrated and used to extend a network (bridge modus), it also looses all ethernet connectivity then (that woul explain why connecting it by ethernet didn't help during initial setup and data transfer)
    Is there a solution besides ditching the Fritzbox and using the TC to build the network? Because basicly I still need the Fritzbox for its DECT features.
    Thank you for any help in advance and have a nice day,
    Olli

    You have double hop wireless with this setup..
    You should bridge the TC.. that is router bridge not wireless bridge, and plug the TC into the Frizyboy by ethernet.
    Then you can setup the TC wireless to reinforce the fritzy..
    Same wireless name as SSID.
    Same security settings... really should be WPA2 AES or in TC personal.
    Same password..
    Just different wireless channel.
    Then you can use 5ghz on the TC if you are up close and personal.

  • HT4623 I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select General there is no Software Update button to choose from. How do i update my Ipod to the new IOS system?

    I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select <General> there is no <Software Update> button to choose from. How do i update my Ipod to the new IOS system?

    You have to hook it up to a computer and update it to ios 5 and then there will be a "software update" button.

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  Now the cursor moves but cannot select anything.  Suggestions?

    I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  When opening up a browser or application, the cursor moves but cannot select anything.  Suggestions?

    Maybe something in these Apple support articles will help.
    Keyboard Doesn’t Work
    Keyboard Keys Do Not Respond
    Keyboard/Mouse – Troubleshooting Wireless

  • Material determination with Product selection

    Hi SAP Gurus
    We are using material determination with product selection. The process is that customer will send in one product in a sales order. At the time of doing ATP we have to look for about three or four possible alternatives and confirm that alternative which has the highest stock level depending on the ATP situation. We have configured material determination with SAP standard substitution reason’0006’ to take care of this. The problem with this is that this creates two line items in sales order as the item substituted is shown as a sub-item of the material entered. We do not want to have two line items in a sales order for this. Is there a way we can do material determination with product selection (Based on ATP) and have the item substituted replace the item entered in a sales order? In other words we do not want to see two line items in a sales order. The substitute item should simply replace the original item and the material entered could be stored in field VBAP-MATWA. I have gone through all the standard SAP documentation which clearly states that in order to material determination based on ATP we have to use outcome A or B both of which create a sub-item.
    I was wondering if there is any workaround or if there is any user exit in which we can replace the original item with the substituted item?? Any help or any direction will be highly appreciated.
    Another question is if we were to use APO for doing global/Rule based ATP is it possible to get rid of the double line items. We have also tried to use rule based ATP in APO and use product/location substitution in our sandbox system to see if we can get back only one line item. But even in that case we do get a sub item. Any help on this issue will be greatly appreciated. You can also send me an e-mail at [email protected]
    Thanks
    SDSAPCON

    >
    SAPCON SD wrote:
    > Hi SAP Gurus
    >
    > We are using material determination with product selection. The process is that customer will send in one product in a sales order. At the time of doing ATP we have to look for about three or four possible alternatives and confirm that alternative which has the highest stock level depending on the ATP situation. We have configured material determination with SAP standard substitution reason’0006’ to take care of this. The problem with this is that this creates two line items in sales order as the item substituted is shown as a sub-item of the material entered. We do not want to have two line items in a sales order for this. Is there a way we can do material determination with product selection (Based on ATP) and have the item substituted replace the item entered in a sales order? In other words we do not want to see two line items in a sales order. The substitute item should simply replace the original item and the material entered could be stored in field VBAP-MATWA. I have gone through all the standard SAP documentation which clearly states that in order to material determination based on ATP we have to use outcome A or B both of which create a sub-item.
    >
    > I was wondering if there is any workaround or if there is any user exit in which we can replace the original item with the substituted item?? Any help or any direction will be highly appreciated.
    >
    > Another question is if we were to use APO for doing global/Rule based ATP is it possible to get rid of the double line items. We have also tried to use rule based ATP in APO and use product/location substitution in our sandbox system to see if we can get back only one line item. But even in that case we do get a sub item. Any help on this issue will be greatly appreciated. You can also send me an e-mail at [email protected].
    >
    > Thanks
    >
    > SDSAPCON
    In the substitution reasons ...mark the OUTCOME as blank for this particular 0006. I am not sure for ATP
    rgds
    Sai
    Edited by: Sai on Mar 27, 2008 10:00 PM

  • A query with "insert..select" run with dqp?

    I would like to know if a query with "insert cluase select clause" is operated with the function of the dqp.
    I think that a query portion with "select clause" is possible to run with dqp.
    if anybody knows about this case, please let me know.
    Thanks in advance,
    Dokon Kim

    There is no such thing as pl/sql 5.1.4, at that time pl/sql didn't even exist.
    You also state it works in Sql*plus but it doesn't work in PL/SQL as PL/SQL is using OCI7. Which isn't true.
    Please stop playing games and withhelding information.
    Post the real info. Not what you think is important.
    Why are you using a (desupported) 9.0.1 client against a 10GR2 database?}
    Sybrand Bakker
    Senior Oracle DBA

  • Product selection with outcome B

    Hi all,
    I would like to know which item category  and schedule line category to be used if I am using outcome B in material determination functionality.
    Can anyone help me with this configuration.
    Regards,
    Beena

    Hi,
    For product selection with outcome B, The higher level item category is TAX(Non stock item) with schedule line category CX(No inventory mgmt.).
    Item category of product selection is TAPS (Std.Item PS) it comes with Schedule line category of PN( Selection without MRP) and PP (Selection with MRP).
    These are all standards. If you would like to configure new item & schedule line category that is also possible for particular order type.
    Hope, it is useful to you.
    Regards,
    S.Balaji

  • Inventory Management :Delta IP of BF runs with selection from Init IP of BF

    I have an init IP for BF DS which i ran with selection on posting date.
    I have another IP for delta for BF without any selection criteria.
    But, when i run the delta IP, it runs with the selection on posting date, the same value that i used for init.
    Even if i modify and clear the delta IP of any selection, and run it, it still runs with the selection.
    How do i rectify this.
    Thanks,

    that is the correct process. if u do init with some filters then those would be applied to Delta by default. u cannt remove those filters from delta. if u want to do it anyway u have to delete the last init request then the filters wodnt be applied. but in this case u have to rerun ur init again without any filters so that u can get delta.

  • HT1349 So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

    So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

    The latest version of iTunes tends to act up occassionaly. See this support document http://support.apple.com/kb/HT1923 and remove and reinstall iTunes. This will not affect your music library, apps or other content in iTunes. Make sure you follow the steps exactly.
    Also, just copying the ringtone will not get it into your phone. iPhone ringtones have an extension of m4r, and you have to first take the Media player file and covert it to an AAC version. From there you need to change the extension from m4a to m4r. If you cannot see file extensions in Windows Explorer, which is actually the default action, go into Organize>Folder and search options, then hit the View tab, and then remove the checkmark by hide file extensions from known file types. After you have created the m4a version and changed the file extension, you can double-click on it and it should show up in the Tones folder in iTunes. From there, sync the phone and it should show up in the list of ringtones.

  • Replacing development system with copy of production system during upgrade

    Hello Guru,
    We are planning to replace our development ECC 5.0 system with a copy of production system, and to perform upgrade to ECC 6.0.
    SAP upgrade guide stating that:
    "If you have modified SAP objects, make sure that you keep your development sysetem.  Do not copy your production  system to your development system for test purpose."
    If we are planning to "Reset to original" for majority of SAP's objects during SPAU, are there other reasons we need to consider the impact of replacing development system with a copy of production system?
    Thanks in advance!

    Thanks for your response. 
    When we first implemented SAP system 3 and half years ago, the consultants and the developers were using the development system like a sandbox system, they tried out features or developed programs for learning purpose.
    Hence, the development system and production system are very different.  
    There are many repair transport requests that will never transport into production.
    Also, we developed client strategy (different client numbers for each system u2013 Dev, QA, Prod) during the initial implementation.  
    We were told by the upgrade consultant, it is standard that the development system replaced by a copy of production system during upgrade.  The client number in development system will be the same as the production system after upgrade.  If I want to avoid confusion for the developer & testing users, I would have to create a new client using the previous development client number, and then perform client copy.
    As I review the SAP upgrade guide, I saw the statement about not to replace development system with production system, I would like to know the reasons behind SAP's statement.
    By the way, we will replace our QA system with a copy of production system during the upgrade.

Maybe you are looking for