Product view - Heuristic Error (RRP327 & RRP433)
Hi,
I have created forcast in DP, transferred the forecast to PPDS and in the product view i am trying to run a heuristic. I get the error message "Order not created for product XXXX location XX".
Message no. /SAPAPO/RRP327
When I drill down into the log I notice that the error has occured during creation of purchase requisition for a component. The message reads as follows.
"External procurement in planning segment not allowed (Component YYYY)"
Message no. /SAPAPO/RRP433.
The strategy used for the Finished material is 56 (planning w/o final assembly). But i dont understand why this should prevent the creation of purchase reqsn for the component.
Thanks,
Ashok
Visu,
I have never tried it in APO. In R/3, you can customize a strategy GROUP so as to contain both an MTS strategy and an MTO strategy. During Sales order creation, you can then change the requirements type from MTS to MTO (manually).
I always recommend against doing this. The users end up being so confused that they are not happy with the solution. MRP results are not always predictable. Where the users insist that they have to have this flexibility, I recommend that they create a mirror plant, in which one plant has Material Masters categorized as MTO and the second plant has the same materials, but categorized as MTS. Physically, the plants are the same place. Warehouse personnel take instructions from planning to periodically move materials from one plant to another when required. Customer service or planning manually move the sales orders from one plant to the other, depending on what type of product is required.
This scenario could map to SCM, but it would be just as ugly there as it is in R/3.
Regards,
DB49
Similar Messages
-
Error while creating planned order in product view
I am getting following error when I try to create planned order for a product in a Location manually in product view using /SAPAPO/RRP5.
Error occurred while creating order
Message no. /SAPAPO/RRP251
I checked the product and resource. Everything looks good.
Block is available in the resource WMP1_2041_001 for characteristics specified in planned order.
Product master and PDS look good.
In the planning log, I see the following error message.
Plan explosion failed for product LBRA1050-661 in location 2041
Message no. /SAPAPO/RRP718
I have not found SAP notes for above error.
Can you pl let me know what this is due to?
Thanks,
SriniSrini,
The message was created as a result of several notes, such as 1582997. There are others.
The implication is that you have an invalid source somewhere in your BOM. Maybe a bad component part, maybe a bad transportation lane, maybe an invalid BOM, or maybe a bad PPM/PDS.
If you can't find the problem using logical troubleshooting steps, have one of your programmers debug. Have him put breakpoints in FM /SAPAPO/RRP_PLORD_CREATE . If you are particularly lucky, you will find a developer that understands German, because all the internal comments in this FM are in German.
Best regards,
DB49 -
Interactive Heuristic not working in product view
Good morning,
I am trying to run a Heuristic in the Product view (sapapo/rrp3) and I get the following message:
'Stage number algorithm can not be run in the simulation version' but I am trying to run this in our active version, any ideas?
thanks in advance.Good afternoon,
The Heuristic maintained in the product master is the SAP_PP_002 (Standard lot) which is working but if you go into the header menu and we run the heuristic that replicates our nightly run (this is a 2 step planning run with SAP_PP_020 = Stage numbering algorithm and then SAP_PP_002 = standard lots).
It fails at the first step saying that it can not be executed in the simulation version?
Could this refer to the nature of the process rather than a simulation planning version? I mean due to the process that the number staging algorithm works, may not work running in APO and simulating the results (due to the data is only firmed once saved). -
Run time error on Product view
Hi Guys,
I got a run time error when I open the transaction to view Product /SAPAPO/ MAT1.
The error message says "DBIF_RSQL_TABLE_UNKNOWN" with the description "A table is unknown or does not exist". Whereas, when I verified in the database, the Table exists in the system.
What could be the issue can anyone throw some light on this?
Regards
aarveyHi Suresh,
I checked the database connectivity.. and I am getting the communication back. So there is no problem with RFC connectivity.
I dont know if it helps, I am getting another problem and as u mentioned abt the planning version, may be it helps...
Actually the model is active...but when I go to the product view in IPP, I am getting the error "Invalid planning version"
Regards,
aarvey -
COM-Error unkown while displaying the product view
Hello,
In our SCM 7.0 system we call the transaction "/sapapo/rrp3".
Enter Plng Version.
Enter Product .
Enter Location .
After pressing enter the system gives the error message:
COM - error unknown
Message no. /SAPAPO/OM001
A COM routine has encountered a program error.
The program will be terminated.
How can we solve this problem and show the product view?
Thanks in advance,
Yasar PalaHi,
If the consistency check doesn't help, please see if the below notes are relevant to you.
Note 1349834 - COM error in Product view for configurable material
Note 1235835 - //RRP3 dumps in tab 'Forecasts' when values are negative.
Regards,
Senthilrajan -
HTTP Communication and View activation error
hi all,
We are using CRM WebUI. We have Product Master screens. In developement environment everything works fine. whee we migrated it to consolidation env i am getting following error.
Not able to understand this error. I get the HTTP Communication error ot the product search page and the Target view activation error when in product creation screen.
Please help!!
Cannot display view MainWindow
An exception occurred during the internal HTTP communication Exception Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text: HTTP answer has status 404
Additional Info: Business Server Page (BSP) Error
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 113
An exception occurred during the activation of target view OverviewMaterial.MainWindow for the navigation
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View OverviewMaterial.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162Hello,
a HTTP error of 404 means NOT FOUND.
Maybe you can have a look in the TX SICF if the BSP component is activated. Just search for the service = BSP application name.
cheers Carsten -
SNP heuristic error maximum number of orders per period reached
Hello All,
I am getting one strange error "APO SNP heuristic error maximum number of orders per period reached (000000040)"
Product XXX/ Location XXX: Maximum number of orders per period reached (000000040)
For the problem : PPDS heuristic is working fine, while running the SNP heuristic I am getting this problem.
Please let me know asap.
Thanks in Advance,
Kind Regards,
SantoshThere is a section in the IMG where you can change this behaviour.
in SPRO - SAP SCM - IMG
-> Advanced Planning and Optimisation
-> Supply Chain Planning
-> Supply Network Planning (SNP)
-> Basic Settings
-> Maintain Global SNP Settings
You will see the field "Heu.: Orders per Bkt" which should have the value of 40 in there, e.g. the limit to the number of orders SNP can raise in any planning bucket.
If you raise this number (to say 100) then hopefully your message will no longer be issued by the system.
Alternatively, you can check the cause of why the system is rasing so many orders. For example, check the lot size that the Product has for that location (lot-for-lot will create an order for every demand for example).
Hopr that helps
Regards
Ian -
Product: Mergemodule (x64) -- Error 1904.
Hi all,
I'm trying to install MergeModule(x64) in windows 8.1
But the installation goes unsuccessfull.
I got the issue in the event viewer.
Product: Mergemodule (x64) -- Error 1904.
Module C:\Program Files\Common Files\Business Objects\2.7\bin\crqe.dll failed to register.
HRESULT -2147010895.
contact your support personnel.
All the further .dll shows the same problem.
Activation context generation failed for "C:\Program Files\Common Files\Business Objects\2.7\bin\crqe.dll".
Dependent Assembly Microsoft.VC80.ATL,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0" could not be found. .
Kindly help me in troubleshooting the issue.
Best Regards,
ArunHi all,
I'm trying to install MergeModule(x64) in windows 8.1
But the installation goes unsuccessfull.
I got the issue in the event viewer.
Product: Mergemodule (x64) -- Error 1904.
Module C:\Program Files\Common Files\Business Objects\2.7\bin\crqe.dll failed to register.
HRESULT -2147010895.
contact your support personnel.
All the further .dll shows the same problem.
Activation context generation failed for "C:\Program Files\Common Files\Business Objects\2.7\bin\crqe.dll".
Dependent Assembly Microsoft.VC80.ATL,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0" could not be found. .
Kindly help me in troubleshooting the issue.
Best Regards,
Arun -
PReqRel can not be seen in product view in apo
Hi expert
when we have stock transfer process, we can see purchase requistion for the material in procure plant in product view
in apo. And we can see TrRes. for this material in supplying plant. But we can not see related PReqRel in supplying plant in
apo. I don't know why. Which Material dependent object should be marked if we want to transfer PReqRel for the material?
Thank you in advance : )Liting,
Data is right. This is the 'classic' case of missing Source of Supply
Open the Preq in rrp2 and see if a source of supply has been assigned. See if there is a valid transport activity in the preq. Look for available Transportation lane and ensure one exists.
If the problem is with incorrect Master Data, correct the data, delete the original preqs manually and rerun heuristics.
Let us know how you progress.
Abhi -
Distr. Key GLEI in Prod. order not getting reflected in SCM product view
Hi,
We have the CIF integration model active to transfer production orders from R/3 to SCM-APO.
When we create a production order in R/3 it is getting transferred over to SCM and can be seen in Product view for the material-plant combination.
If we have the distribution key as GLEI on the production order in R/3, and we looked at stock requirements list-MD04 the receipts were split across evenly from the start date to the end date of the production order.
However, in the product view of SCM, the material was shown as available only at the end date of the production order with the full quantity.
Please provide any pointers as to something we might have missed out that made the CIF'ing not work properly...
Thanks & Regards,
Renjith John AndrewsHi Renjith
Yes I do mean the Production Process Model. To check setting you need to do the following:
Transaction /sapapo/scc03
Click on choose plan via PPM and enter your material and location and press change.
Double click your operation
Double-click your activity
On the components tab you should see your "Output" material (Type O in I/O Indicator field), next to this should be the consumption indicator field. This is the one that has to be set to 'C'.
Hope this helps.
Regards
Ian -
Report Viewer Configuration Error
Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Horizons are missing in product view
Hi Frns,
In my product view of a KMAT material, the SNP Horizon & PP/DS Horizon lines are missing !! What could be the reason ??
I have maintained the horizons in the product master (SNP2 & PP/DS tabs)
Still the horizon lines are not visible in product view...
Thanks,
Krishnamy mistake..
made the product strategy group 10 in ERP..
when i made it 40, things are fine.. -
Forecast Consumption in APO- No Data Available in Product View
Hi Experts
I facing some problem in Forecast Consumption in APO. The APO system is connected to a R/3 system. So data relevant for Forecast consumption comes from R/3.
The allocation indicator in the requirement class assigned to the strategy maintained in the product master is set as " no consumption with customer requirement". and the same is transfered to APO.
I have the changed the settings in APO and here are the setting maintained in APO to enable Forecast Consumption.
Product Master Setting:
a) Consumption Mode: 2 ( forward and backward)
b) Consumption Period: ( 30 days both backward and forward)
c) Strategy Group : 20 and assignment mode is set to "Assign customer requirement to planning with final assembly" and category group has sales order - BM
d) The check mode setting in the ATP tab is set to "Assign customer requirement to planning with final assembly"
I have a forecast for today's date and a sales order transferred from R/3 for the same date. But I do not see any data in the Forecast tab in the product view ( /sapapo/rrp3 Tcode)
Please let me know if I am missing any setting in APO. Or the SAles order carries the strategy information from R/3 and influencing the consumption any way.Hi,
What is your Forecast & Sales order quantity? If these are same then sales order consumed forecast, so you can not able to see in the rrp3.
Second thing try to increse the forecast quantity than sales order quantity & then check it.
Regards
Sujay -
Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AMThis has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/ -
Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This ProblemLotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.
Maybe you are looking for
-
Please help, I an unable to update any apps on my ipad through the App Store. It will not connect. Also, I am no longer able to log in to bingo bash app and my towers app will not connect either. If I restore my ipad will that fix the problem and if
-
Where can I find the download link for Photoshop Elements 6 for Macintosh?
Hard disk crashed, need to reinstall all software including Photoshop Elements 6 for Mac. The download link has been removed from Adobe site and support is saying I have to purchase a new license. I already have a licensed version of this product a
-
Payables : Manul Hold workflow notification in R12.1.3
Hi Everyone.... We are using R12 version 12.1.3 and below is the requirement in Payables Once the Invoice is created, manual HOLD will be applied by the User by opening the Invoice. Business looking for below options 1. Workflow notification should b
-
Difference between different types of patches
Hi all I want to know difference between the database upgrade patchset, cpu, psu, one off patches and what are the methods of deploying these patches?
-
Hi Guys, i am new to XR IOS, just recently deployed some 9001 XR on our network, had a prblem recently where one devices interfaces loose traffic, all the neighbours go down as per the below log, i am trying to find the reason for this as it keeps ha