Production order no range

Dear Experts,
i configured a no range against one order type.
order type zp01\
no rage 1000 to 9999
type :internal
but when i am making the PO the no of 1st po has come as 1000 and for second it has1020 & so on..
the basic problem is no rqange is not coming in sequence.Please advise on this.
regards
RAVI ARORA

Hi Ravi,
This normally occurs coz of the buffering for the no range maintained. To speed up the processing
the numbers are not brought indivually from the database, a range of number (based on buffer size maintained
it seems 20 in your case) is brought and kept in the memory expecting other orders to be created & to speed
up the process, but sometimes if there is some abrupt stoppages in the server these are wiped out, next time
when it fetches the numbers, as the last no used is updated to 20, the system picks this number.
Sometimes this also occurs due to other reasons also but am not clear on it, to avoid it you can reduce the
buffer size, which may affect the performance of the system. But again this depends on how many orders
you create etc...
Regards
Mithun

Similar Messages

Enhancement for Production Order Number Ranges

Hi
Are there any enhancements for production order number ranges. We have the setting as external numbering but need to set the order numbers (alphanumeric) based on certain conditions.
Thanks & Regards.
Sam.

Hi Sam,
PPCO0007 .......check this one.....
i guess it is helpful
Regards,
Bhaskar

Production Order Number Range - Not Continuous

Hi Team,
I have assigned the internal number range for my order type in CO82. When the system assigns the internal number (my production order is 10 digit number) to my production order, the number is getting assigned continuously. For example, if the last created production order number is 2481000001 , i am expecting the next number as 2481000002. But system is creating some number like 2481000023. In-between many numbers are missed. Why?
Production Order Number Range Assigned: From: 2481000000, To:2481999999 (Internal Number range)
Thanks

Hi Caetano,
As described in the note 62077, i can do the following setting.
1. Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
2. If you want to change the buffer size only, enter the corresponding value in the field 'No. of numbers in buffer'.
Case 1:
If i activate the option "No Buffering" for object "auftrag", will it have any negative impact like performance of the system?
Should i need to activate the option "No Buffering" for object "auftrag" before creating the production order?
Case 2:
I do not want to deactivate the buffering. But i will set the 'No. of numbers in buffer'as ONE (1). I think with this settings, the numbers will be always continuous. Will it have any system performance impact?
Thanks

Production order number range after taking the back up from production serv

Dear all,
My client did a back up activity yesterday from production server to disaster recovery server.
After completing this activity they shut down there production server to do the testing of this new server.
Production guy converted the planned order to production order and he got a number say 2000064732, but the current number in number range is 2000080139.
But same guy created order one day before in production server that time the order number in 2000080138.
After 2 hours the system (by that time he has create more than 50 orders) started assigning the number as per the current number. Ex: 2000080140,141,142u2026
As per my observation they have maintained buffer as 20. As per buffering logic system has to skip in forward direction not in reverse direction.
But in our case the system skipped in back word that nearly 16000.
So please help me to find out the reason why the system assigned those number and on what basis.
Thanks for your help
Regards
Ramesh

See SAP note 62077, your application server was shut down, the numbers that are left in the buffer (that is, that are not yet assigned) are lost. As a result, there are gaps in the number assignment.

Production Order Number Ranges Assignment

Hello
We are facing one problem
We have internal number range for production order.
On creation System took few orders in Sequence and few it skipts and then it goes back to seq again
1st it created 1-9
then it created from 21 -26
then it created 10-15
again from 27
Request you to let me kno how we can get it sequential.
In SNUM buffer is maintained as 20.
Thanks N Regards,
Hitendra Dwivedi

Dear
This is because of user buffer, which system will allocate the number from numer range to each user so that there will not be any problem during saving, This is done by basis person. Just discuss with basis consumtant if you want to reduce the gap from one order to other.
This is not a bug, this is standard. Reason for this is the buffering of number range. You can find explaination about this bahvoir in SAP note 62077, this note descripe the behavoir in general. SAP note 456777 descripe the behavoir once again for production and process orders.
Check the above notes and explore
Regards
JH

Number range Object for Production order Number range profile.

Hi ffriends,
 Can anybody tell me how to maintain the Serial Number Range for production order serial no.
 I working on automatic serail no generation for production order.I have one serial no range profile which I am assigning to material in material master but I don't know the number range object for that profile.
 Or can anybody tell me how we attach serail no profile to a serial no range object.?
 Please it is urgently required..........
Regards,
Rajesh Akarte

hi rajesh
in the serial number profile there are certain business procedures which will create the serial no ,kindly check whether for your procedure you have assinged whether serial number to be arranged or not
slecect the serial number profile in sutomization field( which you have specified in Material master) and select the serialization procedure and check whether the PPRL procedure is assinged,also check the serial no usage assigned
for detailed process have a look here
http://help.sap.com/saphelp_47x200/helpdata/en/3c/abc38a413911d1893d0000e8323c4f/frameset.htm
regards
thyagarajan

Production Order No. Ranges

Hi expert ,
I was created order & save i got no 100001 ,
But in CO82 , current no range is 100021,
Can u told me where i can set buffer
Thanks in Advance
Thanks
Utkarsh

Dear,
Go to CO82 keep cursor on your order Type say PP01 then go to header menu Interval--Change Current number range. Set it to 100001.
For Buffer
Go To SNRO and for Object AUFTRAG - Order Number Ranges reduce No. of numbers in
Buffer or set it to zero.
Please try and come back.
Regards
R.Brahmankar

Different Production order number ranges with same order type

Dear Friends,
I am working on live project implementation.I am having four manufacturing plants.I am having one order type say PPLE, I am having two different versions say CM and CN.Now my requirement is can I maintain two different number ranges for same order types within single plant .
number ranges should be like,
Plant          Version     Number ranges
1210            CM           CM121008...
1210            CN            CN121008
1220            CM           CM121008
1220             CN           CN121008
and so on.here first two digit should be version,then plant and year followed by order number .
Regards,
Manoj Jadhav

Hi manoj,
You cant have two different number ranges for an order type in internal number range, but in external number range you can have two diffrent number ranges
for example for one order you can start with CM1210080001 and other starting from CN1210080001.
Just convince the client to have external number range
Regards,
Srini

Number range object interval - Production Orders

Dear All,
In number range object AUFTRAG, no. of numbers in buffer mentioned as 20,
To my knowledge, because there is buffer defined as 20, system may skip some numbers in production order number range amounting to 20.
But today I have observed that, in the system numbers skipped is not 20 but less than 20, i.e 17.
Can anyone tell me why is this happened?
Regards,
Pavan

hello
pls check as per below
SPRO Production-Shop Floor Control-Operations-Confirmation---
>>>> then you can check in the follwing in the
Define Confirmation Parameters
Confirmation Parameters for Collective Confirmation/Fast Entry
Define Time for Confirmation Processes
Define Paralleling Type for Confirmation Processes
Define Reasons for Variances
Define Field Selection for Confirmation
Define List Layout
Check if required information available in the
rgds
Brijesh

Production order create different number

Hi All,
Normally the prod order is created with starting number 9xxxxxxx (8 digits), suddenly it is created with starting number 1xxxxxxxxxxx (12 digits).
Where to check how the production order gets the number?
How to solve this problem?
Thanks.

Dear,
You can maintain the production order number range in SPRO.
Follow the below path:
IMG-- PRODUCTION--SFC -- MASTER DATA -- ORDER -- DEFINE NUMBER RANGE FOR ORDER.
Hope it will help. revert for more clarification.
Regards,
Alok Tiwari

No. range issue : at the time of production order settlement

Hi expert,
My user is unable to settle production order due no no range issue:
Short text of error message:
Document number 9000 20001 2008 was already assigned
Technical information about the message:
Diagnosis
     Document number 20001 in company code 9000 and fiscal year
     already been assigned.
System response
     Termination of processing.
Procedure
     Check document number range 02 in company code 9000 and fi
     2008 and correct the number range status if necessary.
Message classe...... "F5"
Number.............. 152
Variable 1.......... 9000
Variable 2.......... 20001
Variable 3.......... 2008
Variable 4.......... 02
Variable 3.......... 2008
Variable 4.......... 02
Pl advise.
Regards,
Samar

Hi experts,
Thaks for the reply.
Pl advise what is the configuration/T code to be maintained for no range
Regards,
Samar

Number range for serial Number in production order

Hi all,
I want to use the Serial Number in production Order ... It should be generated automatically ... when i try this system creating the serial number from 1.....i want the number to start from 2000000 , How to configure this number range ....
Please advise me ...
Regards,
kumar

Dear
Following steps are required in Serial Number Management :
1. OIS2 or Go to path SPRO > Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > Serial Number Management > Define Serial Number Profiles. There enter "2" in Stkck column for your serial profile.
2.SPRO->SAP Customizing Implementation Guide->Plant Maintenance and Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories->Define Number Ranges
3. IQ01 Create Serial Number
4. MM02 You need to add the above created Serial Number Profile in the Material Master ion the work scheduling view .
5. CO02 Assigning the Serial Number through Production Order,
Also Serial Number can be created automatically by clicking on u201CCreate Serial Number Automaticallyu201D , Release the Order
6. MB31 Do the GR for the above created Production Order and Check in MMBE for serial Numbers
Try and check
Regards
JH
Edited by: Jiaul Haque on Nov 22, 2010 7:43 AM

Plantwise separate number range for Production order

Hello SAP Expert,
I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
Please give way to do this.
Thanks in advance.
Regards,
Yogesh.

Hi,
As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
Regards,
Dhaval

External Number range for Production Order with additional logic

Hi gurus,
My requirement is -
I have two products - for my Local and Export
I have made two Order type for local and Export - say LOCL and EXPO
My LOCL order no will start with L and EXPO with E
I can do this with external number range set for each order type..
Now my question is -
My client wants Production Order in this fashion -
L20111------
L is local, 2011 is year, 1 is jan (1 to 9 - Jan to Sept, A - Oct, B- Nov, C - Dec) followed by a serial number
How can we address this in SAP?
Any clues?
Thanks for your suggestion in advance.
Regards,
Srinivas

Hai,
You need to use User exit for this. kindly contact your ABAP team.

Number range for Production order

Dear All SAP PP Gurus,
I am new to SAP PP and want to learn about number ranges for production order.
Can anyone tell me step by step procedure for creating & Assigning
number range.
Thanks in advance.
Regards.

Hi MIHIR,
I just chkd the blog spot of MR Siva.
It is very much self expalnatory.
Siva ,pls update more documents in ur blog,it is very much helpful
THNX all

Production order no range

Similar Messages

Maybe you are looking for