Production order, put cursor on field in Assignment Tab

Hi,
I work on an enhancement for production order...
When a user created a production order, if the "Profit Center" (in "Assignment" tab) is empty at saving, a popup is displayed to inform the user that he could filled this field. If he doesn't want to do this, he clicks on "Continue" button, elseif he wants to fill "Profit Center" field, he clicks on "Modify".
My problem is when the user clicks on "Modify" button, I would like that the "Assignment" screen appears and the cursor is located on the "Profit Center" field. I take a look on technical information and the only info that I can use is the screen 0115. But I can't indicate the position to the cursor !
Can anyone help me?
Thanks in advance.
Best Regards.

Hello,
You can try with 'Implicit Enhancement' in PBO of that screen 0115 and use 'SET CURSOR FIELD..statement' by checking user command..
Thanks

Similar Messages

  • Production order put away in WM

    Is it possible to directly put-away a production receipt to a Bin? Meaning if i do a CO11N it will confirm to Storage type 100 and bin ABC directly without going through the interim Bin which is the storage type 902 and production order number?
    I don't think its possible based on what I know but I want to confirm.
    Does it have to go through the interim bin in 902?
    <removed by moderator, read the forum rules>
    Message was edited by: Jürgen L

    Hi, this will work but I'm not convinced it would be the best solution as all materials would be placed into bin ABC and you would have to transfer everything out to the correct bin.
    I think it would be better to flag the mvt for auto TO and amend the receiving storage type so that placement confirmation is not required. The defined search strategies and any capacity checks would then be utailised, along with the individual bin numbers from the MMR.
    Cheers

  • Sales order number not appears  in account assignment tab

    Hi,
    User raised PO for third party and account assignment category.But ,Sales order number  and its item not appear in account assignment tab.
    Can anybody help me.
    Lucky.

    Hi Lucky,
    Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
    Thanks for your inputs on this issue.
    Regards
    Rang

  • Open Production Orders List with a Field from Sales Order

    Hi All,
    I have the following query:
    SELECT distinct T0.[DocNum] As ProdOrder, T0.[ItemCode], (select itemname from OITM where T0.[ItemCode] = OITM.itemcode) As ProdName, T0.[PostDate], T0.[PlannedQty] As Planned FROM OWOR T0, OITM  T1 where T0.[Status] <>'C'
    Now I want to add ORDR.NumAtCard field in this query, pls advise me what change should i make to my existing query.
    Need the solution urgently, pls help asap.
    Best Regards,
    JAQ

    Hi,
    Try this:
    SELECT distinct T0.DocNum As ProdOrder, T0.ItemCode, T1.itemname As ProdName,
    T0.PostDate, T0.PlannedQty As Planned,T2.NumAtCard
    FROM dbo.OWOR T0
    INNER JOIN dbo.OITM T1 ON T0.ItemCode = T1.itemcode
    LEFT JOIN dbo.ORDR T2 ON T2.DocEntry = T0.OriginAbs AND T0.OriginType = 'S'
    where T0.Status != 'C'
    Thanks,
    Gordon

  • Manual production order creation in MTO

    Dear collegues,
    I am stuck in a scenario:
    I have a finished item A. strategy 20 is used.I created sales order for A in plant 1000. MRP run in plant 1000 happens. Through special procurement key 40, system generates planned order in plant 2000. Planned order is converted to production order. I can see in assignment tab of production order,  Production plant is 2000 and planning plant is also 2000. Till here it is ok. I will do GR against production order in plant 2000 and through SD route I will send it to Plant 1000.
    But when I create manually production order in CO08, always system sets in assignment tab of Production order , production plant as plant 2000 and planning plant as 1000. How to avoid this? Why manual production order is not like MRP generated planned u2013production order?
    Kindly help.
    Regards.

    Give below a try in sandbox (Not from experience, so not sure if it works):
    At the time of production order creation, maintain the production plant in Sales Order & ensure the demand flow to MRP is switched off at schedule line (If you're not sure, take help of your SD person).
    The order created in CO08 should now have production & planing plant as same. Once that is done, switch back the plant in Sales Order & release the demand to MRP. (I hope the cut over plan has addressed the sales & MRP flows, so no inputs from my end)
    If the above does not work, then revert with details.

  • PP Production orders link with Profit Center

    hi experts
    we are working on Projects based scenario and Production is doing in the same way, we mentioned profit center in Project WBS element, but my requirement same profit profit center should be link to production order.
    what are the settings need to be done please help
    thanks in advance
    Sing

    Dear Slng,
    In my understanding if you have assigned a profit center in the material master under Costing1 view then it get's copied
    automatically into the production order which can be seen under Assignment tab page of the production order.
    This is the process when you create a production order from a planned order using CO41/CO41 or by creating a production
    order manually using CO01.
    Check and revert back.
    Regards
    Mangalraj.S

  • Sales order field in production order

    Hi Gurus,
    I see there is a field sales order assigned to production order. In my scenario when we create a sales order production order gets created automatically in background due to the strategy group. So in production order, i see a field sales order and also i can see the sales order number in that field which is fine.
    But when we create a sales order with reference to quote, then in production order i see the quote number displayed in sales order field in the production order.
    My client wanted to have sales order number rather quote.
    Please suggest.
    Thanks,
    Quantum.

    Hi,
    Please note that if sales order stock has already been assigned to a quotation, the stock of the resulting orders is also managed under the quotation number.
    If you require to tag the sale order no to the production order then define the requirement type not as the make to order. This you can control at item category level also. While for sales order make requirement type make to order related.
    While doing so please note that you have to use the special rule to determine the requirement type which will based on the item category and mrp type.
    Hope this will help you.
    Thanks and regards,
    Atul

  • Assign Production Order To Asset

    Hi
    Please Advice
    I have a scenario where in I need to asssign the Producten Order Created for material to Asset for accounting point of view in the sense that all the expenses done for that Production order is transfered to that particular assigned asset.
    We have the option of assigning the Asset to the Purcahse Order in case we procure the same material. So it is possible in the case if the same material is produced inhouse.
    Regards
    Rahul Bhardwaj

    Thanks For the reply
    Tell me few things,
    1) Are you producing this material in house or some time purchase from out side also?
    Ans 1: Yes the die is produced inhouse or sometimes we procure it from outside.
    2)whether you want existing produce die to available in inventory or you want to have it as Asset only?
    Ans 2:  See they want the dies to be available for the inventory. But either they can have inventory for that or can define as asset so still the decision is pending.And I have checked in case of asset that when you create a Pur.Order of asset and do migo and than miro than the quantity of asset is updated along with its cost. I think they will go for asset as they can post the depriciation value for that.
    3) Are you talking about Die Amortization cost?
    Ans 3 : No sir amortization is not involved.  Actually what happens is that when I produce the die inhouse i receive the quantity produced and the value for the die is updated in the material G/L account. Now when i go like this i cannot do the depriciation. So even here in case of inhouse produced die  I have to create an asset for that , but the probem is that they  want system to propose the  value of that asset i.e. inhouse produced cost which includes (the raw material cost + Activity cost + Overheads) , every time they produce it inhouse. so they want this cost to be transfered to the asset they create.
    Hope sir I am able to answer you questions, but still in case any further clearance is requiered , please do write in.

  • Regarding STATUS FIELD INFORMATION OF T.CODE CO03(Display Production Order)

    Hello Friends,
    I want to know, how could i get the Status field information from T.CodeCO03(Display Production Order).
    Any F.M or Table Name.
    I have production order Number as input field and output will be Status.
    Regards
    Amit

    Hello Amit ,
    u can try fm STATUS_READ.
    i think OBJNR u can get it from AFRU.
    regards
    Prabhu

  • Make Scrap portion field in production order header as display only

    Hi Experts,
    We have a requirement to make scrap field(CAUFVD-GASMG) in production order header as display field only. We do not want users to enter any values here to denote the quantity scrapped in production orders. I am not aware of any configuration to make this field as display only. Please let me know which user exit or BADI available for this purpose. We do not want to use any screen variants and transaction variants and would like to restrict this at order type or plant level.
    Thanks
    Rijil

    Hello Rijil,
    If not with variants than check with enhancement.
    PPCO0006  Enhancement to specify defaults for fields in order head
    PPCO0012  Production Order: Display/Change Order Header Data
    PPCO0018  Check for changes to production order header
    Regards,

  • Batch no assigning during production order creation

    Sir,
    We are manitaining the batch management for inut raw materials. During production order creation it is mandatory to assign the batch no for raw materials then only production order releasing is possible.In our case due to batch assignement to production order while order creation,we are facing the lot of problems like batch no not assign for full req qty and also if unavailabilty of stock for particular batch no it will come to COGI.hereby i need experts help for,
    1.I want to determine the batch no during confirmation instead of order creation and also allow to release the production order even batch should be in blank.
    Kindly help
    Regards,
    PS

    Hi
    For Rawmaterials why cant'n you assign Batch nos buring GR of purchase order.
    Then you can do automatic batch determination during confirmation of order for mvrmt type ;261...
    This is  easy  to handle.
    Please check and come back
    Regards,
    srihari

  • Production order report - to see if it was settled and UD on it

    Help!!!
    I need as report for Production orders that will show the User Decision on the order and if it was settled or not.
    I dont think there is a standard report for that. Am i wrong?
    As of now, i can see the report COOIS that is showing the order info and QA33 that is showing the status of UD.
    Can i combine these two reports and also add the field "Cost" from the order master data to track if the cost is =0 then it was setteled?
    If yes, how to combine these reports? Is there a common field? Material is a common field, but sometimes there are multiple orders for the same material, so it will not work.
    any ideas?
    Thanks! Points will be assigned!

    Hello, if the inspection lot was created for in process (03) or production (04) , then the insp lot should have the production order as a common field.
    Hope this helps.
    Dario

  • Production order number onto a purchase order

    Hi guys,
             Is there  anyway I can pull the production order number onto the related purchase order(i.e, if a purchase order has an item which is procured for a production order ). I'd appreciate your ideas and suggestions on this.
    Thanks
    Cheris T

    hi sridhar,
    Thanks for the response, we procure components for a production order.put them in stock and use them for production.we donot consume them immediately, so we are not using acc. assignment category 'F'. can you plz suggest me how do we capture the production order number on the PO
    Thanks
    cheris T

  • Priority to production order

    Dear all,
        I want to assign the priority to production order in the priority field. But I was not able to find the customization for the same. Pl help me in that regards.

    Hi Mangesh,
    The Priority field is useful at the production level. In the header table of creation of production order,we can assign the priority of that particular order like 1,2,3,4.if we have two or more production orders using same workcenters based on the priority, we can use this priority field.It is only for information purpose.
    It reflects on the execution of capacity planning(CM01).This is for manual verification at the shop floor control for completing the production order.
    Regards,
    srivas

  • Default of fixed batch number for production order header????

    Hi Experts,
    In SAP, when create a production order, in the production order Header view, in the "Good Receipt" Tab, there is a field "Batch" , which means "Assigns a material that is manufactured in batches or production lots to a specific batch ".
    For some special reasons, we want for some certain materials,when create production order every time,the "Batch" field will be a fixed values.
    For example,for material "AB1" ,"CD2",when create production order every time,the "Batch" field will be "2345" automatically,do not need input manually.But for all the other materials, the "Batch" field would be null ,no value.
    How can I do this? How can assign fixed batch number values to some certain materials in production order?
    If there needs some ABAP development,which user exit do I need??
    Thanks for any reply!

    Hi V.SURESH
    Thanks very much!
    I know what you mean. Default batch number in the production order eans, there is no use of using batch management.
    In fact, my purpose is just want to  deactivate the batch management for some certain materials.
    So for some certain materials,when create production order every time,the "Batch" field will be a fixed values.
    How can I do this? How can assign fixed batch number values to some certain materials in production order?
    If there needs some ABAP development,which user exit do I need??

Maybe you are looking for