Regarding STATUS FIELD INFORMATION OF T.CODE CO03(Display Production Order)

Hello Friends,
I want to know, how could i get the Status field information from T.CodeCO03(Display Production Order).
Any F.M or Table Name.
I have production order Number as input field and output will be Status.
Regards
Amit

Hello Amit ,
u can try fm STATUS_READ.
i think OBJNR u can get it from AFRU.
regards
Prabhu

Similar Messages

  • Process Code for Outbound Production Order??

    Does anybody know the Process Code for Outbound Production Order??
    BASIC Type : LOIPRO01
    Message Type : LOIPRO
    Regards,
    Ravi

    Hi Everybody.
    There's no standard process code for LOIPRO Outbound Idocs.
    This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
    BD64.
    Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
    You can choose.
    Regards.
    Albert.

  • Material status in master data set not allow create production order. but..

    Dear All expert.
    There is one case I don't understand,  the component material within BOM had been set material plant status which it is not allowed to create Production order ( Porder header Msg & PO/Network item msg = B in OMS4).
    If user use tx:CO01 for create production order, the error message block production order can't be created. It is good .
    However, when user is using Tx: CO41 to convert planned order to production order with that material ( status which not allowed to create production Order) . it is successfully without any error message ..  User successfully create production order without limit.
    Therefore,  is there any configure in IMG was wrong?
    thanks for reading.
    Marco

    Dear R.Brahmankar,
    I had followed your instruction to check. It is very helpful.
    when I check program in CO41 (saplcoup), I found that it only check material  status (FG) on top level of BOM .
    Its don't check component material.
    Function CO_ZF_CHECK_MATSTAT_POS  component item in BOM , the program will not check item plant status.
    When I use TX: CO40 to test. I found that CO40 with Program LCOSD1J - CHECK_MATSTAT_COMP have component material status check.
    I'm not sure is that genic CO41 don't have component material status check?
    ths alot
    Marco

  • T.Code to display Transfer Order with respect to Deliver

    Hi all,
    Can anybody let me know,what is the transaction code to display Transfer Order Created with respect to delivery.
    Thanks in Advance.

    Hi Joginder,
    Thanks for early early.
    Do you know the steps to create TO with respect to delivery.?(by any chance)
    I a technical consultant. I dont have any idea on this.
    I have searched in SDN/Google but couldnt find steps to create TO with delivery.
    Thanks

  • ABAP Code to get Production Order Quantity for a material-Status REL,CRTD

    hi all,
    I am new to SAP. I am stuck with a problem while writing a abap code for getting all the production order quantities for a material with System Status REL and CRTD. Please help me out. This is what i tried to do.
      IF t_mat[] IS NOT INITIAL.
        t_mat2[] = t_mat[].
        SORT t_mat2 BY matnr.
        DELETE ADJACENT DUPLICATES FROM t_mat2 COMPARING matnr werks.
        SELECT auaufnr afgamng af~plnbez INTO CORRESPONDING FIELDS OF
        TABLE t_ord1 FROM afko AS af INNER JOIN  aufk AS au ON
          afaufnr = auaufnr
        FOR ALL ENTRIES IN t_mat2
        WHERE af~plnbez = t_mat2-matnr
        AND   au~werks  = t_mat2-werks
        AND   af~gltrs IN s_gltrs
        AND   af~gstri IN s_gstri
        AND   au~phas0 IN s_phas0
        AND   au~phas1 IN s_phas1.
      ENDIF.
    Thanks. Regards.
    Sandeep

    Hi
    There is one std tcode COOIS where u can get the information what u have asked
    Pls check
    regards
    Vijay

  • Field audisp MRP-relevant not modified in Production Order.

    I would like to know if there is a way (Exit, BADI, customizing, etc) to modify the field Field audisp MRP-relevant before or after add a new component or operation in a production order. The system always get the value form the customizing of the production order type and I would like to change this field to other value 1 to 3 for example.
    Thank you in advance.
    Regards.

    Hi Alberto
    Can you please provide more details of your business requirement? On which table would you like to change this field? Do you want to make an order  not relevant to MRP or a reservation?
    You can make any MRP element not revelant to MRP dynamically (don't neet to change anything on the table) using BAdI MD_CHANGE_MRP_DATA.
    See this blog for more details:
    Making an element not relevant to MRP or MD04 using BAdI MD_CHANGE_MRP_DATA
    BR
    Caetano

  • SAP Code to Return Production Order List for a Given Work Center

    We are looking for native SAP code (BAPI, BADI, FM, ...) that would take a work center value as a parameter and then return all the production orders that have been assigned to that work center.
    We are running 4.7 and do not have access to BAPI's BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL.
    I believe we could write our own BAPI for this but was hoping that SAP had something natively embedded that we just can't find at this point.
    Thanks in advance for any information you might share!!!
    Chad

    Thanks, Srini
    This was very helpful.
    We're looking for an SAP object that we can interface into xMII.  So the logic in this report is useful but a BAPI, BADI, or RFC would be ideal.
    Thanks again,
    Chad

  • Custom fields in additional data B not displaying - Sales Order

    Hi gurus,
    I added some custom fields to the addtional data B tabstrip in sales order screen, but they didn't display. This is in the client's system. BUT in our own system it works perfectly. The screen has been activated.
    Maybe it's because of the version difference?
    Anyone experienced this before?
    Any suggestion will be great.
    Thanks

    Resolved by myself.
    For those who would have the same question, please refer to SAP note 386694.

  • Production order no is missing the Batch short text field in MSC2N T.code

    Hi Guys,
    I have some requirement in my project. I have maintained Batch management in my project.
    When I create & release the Production order in CO01, immediately Batch number (Produciton order: Goods receipt tab) creates automatically by the system.
    Also this same production order should be appeared in the Short text field in Basic data 2 tab in the transaction MSC2N.
    But this production order no. is not updated automatically in the short text field in MSC2N.
    Is there any standard settings available for this case?
    Please help me the same.
    Regards,
    Mohan

    Hi Mohan,
    There is no  standard link between Production Order and Batch Master Record, If your client needs the production order number in Batch Master record, short text field. we need to achieve it thro user exits with the help of developers.
    Thanks
    Balasubramanian NSD

  • Mass change of Production Orders status from TECO to CLSD

    Hi All,
    I want to do mass change of Production Orders status from TECO to CLSD. could you tell me is there any t-code by which i can mass change Production orders status from TECO to CLSD. I want Production Orders to be closed, so that further confirmation shouldn't be done for these Production Orders. please let me know the solution.
    Regards,
    Ram

    Hi Girish/Dogboy,
    I can set the status 'Complete' if Order is fully confirmed/fully delivered. When ever i run COHV for partially confirmed/delivered Orders, i get error log saying 'Balance of ORD................ is not zero'. Actually we have lot of Production Orders, where there may be Production Orders released only, partially confirmed etc. so i want them to be closed once for all.
    Regards,
    Ram

  • Report on production order status and shortage report

    I want to know standard report on production order status and shortage report. Kindly suggest.

    COOIS - Production order information system . In this report you can give system status in selection screen  and in report you can get complete status details (both system and user status) .
    shortage report - CO24

  • Production order system status after being settled

    Hello,
    I am currently in ECC 605 project. I remembered once production order is variance calculated and settled,new system status, VCAL , is set at production order.  And sometimes the production order won't be set with status VCAL even though it's variance calcualted. Does anyone have any experience at ECC release 605? Is it normal that settled order doesn't possess VCAL status?
    And another weird behavior is that production order can be settled without variance calculated. At earlier release, system will
    pop up error message if I try to settle a production order which isn't variance calculated. Can anyone confirm if at release 605 it's normal system behavior that system won't block order settlement of production order which variance calculation isn't done yet?
    B. Regards,
    Nancy
    Edited by: Nancy Lin on Jul 14, 2011 9:45 PM

    Hi Rose,
    Try out ..
    STATUS_READ
    http://www.sap-basis-abap.com/sappp016.htm
    Re: Status of the Production Order
    Re: Production order status
    Hope it will solve ur problem
    Thanks & Regards
    ilesh 24x7

  • No System Status Saved In Production Order

    Hi PP Gurus,
    We encountered a short dump when display production order.
    I have checked the system status of this production order from database, and there is NO record in table JSTO, JEST, etc.
    Why the status has not been saved in production order? How do we deal with the existing production order without system status?
    Appreciate any input here.
    Regards,
    SQ

    Thanks, Marcelo.
    Program ZPSFC008 works well in this case.
    This ticket can be closed.
    Cheers,
    SQ

  • OCM u2013 Production Order Status CRTD

    Dear guru
    I want to use ocm for a production order according to a change of a bill of material with a change number.
    Can I run COCM for a production order with status CRTD ?
    OCM is only possible for production order with status REL ?
    Thanks in advance

    Hi,
    OCM is used particularly for the scenario where customer can order a configurable product & afterwards trigger changes if he wants a different configuration - even if the production has already been started. This configurable product is defind via varient configuration.
    Hence rules are set up to define which kind of changes are allowed or disallowed for a specific status of the production order.
    Changes to configurable product is allowed as long as the production order is released, but they are disallowed when the production order gets confirmed. As when order is confirmed that menas product is manufactured & hence they are no changes allowed except rework.
    Hope this resolve your querry.
    Regards,
    Avinash.

  • Table of list status changes of the production orders

    Dear.
    In which table the system store the list status changes of every production order ?
    Thanks.

    Hi,
    First go to CAUFV table input the production order get the object number
    Input this object number in JEST table and get the system status
    Input the system status in TJ02T table ,u will get the production order status

Maybe you are looking for