Production Planning Report

Hi,
My Requirement is This report should provide comparision of Standard V/s Actual Machine hours utilization for a particular resource or for all the resources utilized in a given period and its variance. If the variance percentage is more than 10% it should be highlighted in Red colour as it is an area having potential / scope for improvement.
For this Scenerio please give me solution and tell me which info cubes, data sources , info objects i have to take please tell me i am new to production planning.
Thanks & regards,
Rajesh.

Hi,
Check below thread for more information,
[Production planning Business Content Data sources and cubes;
Regards,
Durgesh.

Similar Messages

Production plan report

Hi sap gurus,
Can you please tell me how to handle this requirement
like saying, tmr there will be 6 process orders.
my role is warehouse keeper. i need a report to tell me which materials with batch number to be prepared for tmr production.
which means, the warehouse keeper do not prepare the stock for specific order, but for whole day requirement
Best Regards,
Parag save.

Hi,
Check for below standard reports :
COIO : Process Order Information system check with Selection profile :
000000000002     Pick List
000000000003     Collective availability check
000000000004     Documented goods movements
COOISPI : Process order information system check with List :
Components
Documented Goods Movements etc
Here also you can save & choose layout as per your requirement.
Try to execute with other filtering criteria in above reports i.e. plant, order type, material etc. with suitable profile / list.
If not fulfilling your requirement, then try to go with customized report.
Hope this helps.
Regards,
Tejas

Production Planning Reports

Hello friends,
My client wants following reports from System. Please tell me how can i get these reports and from where?
Reports are:
1) daily & monthly prod report
2) daily & monthly m/c utilization
3) daily & monthly productivity
4) daily & monthly tooling consumption report
5) daily & monthly operator efficiency
6) daily & monthly m/c idle time
7) daily & monthly rejection cost
8) daily & monthly down time cost
9) m/c capacity/actual prod
11)required tooling wrt component
Thanks in advance!

Hi Kiran
Its difficult to find Standard reports in PP directly as per the client requirement. Most of time we have to go for development in ABAP environment or else can make Quick view reports in SQ00
You can view all the standard reports by using the T-code SAP1 for all modules including PP
Regards
Brahmaji

Cubes for Production Planning

Hi all,
Are there any cubes for production planning reports? Please respond.
Best Regards,
AI.

Hi
Yes, u can activate the following cubes from Bi content for reporting.
0PP_C01,
0PP_C02
0PP_C03
0PP_C04
0PP_C05
0PP_C06
and u can also refer to following link for more information
http://help.sap.com/saphelp_nw04/helpdata/en/28/500b3c56488e6be10000000a114084/frameset.htm
Hope this helps
Sonal....

General Reports for Production planning

Dear all,
Can you please explain me what are the reports generally important for production planning module.
How to generate a reports?
If possible,please explain with an example by showing some screen shots.
Regards
Rajasekaran

Hi Raja,
Did you search in Forum? Please search.
COOIS -Order Information System is the important report for PP module. In COOIS Under List there are different option to see order details, operation details, confirmation details, Error details, component details and Object Overview where you can see order, operation and component details.
CO24 -Missing Parts
MB24 -Reservation List
SAP Standard PP Reports
Thanks & Regards,
Ramagiri

Creation of production order report as per format

Hi!!!!
Gurus!!!!!
I want production order report in some required format.
How to see the format on production order
How to see the report in the following format.
Company name:-
Material requirement Number:-
date :-
Time:-
Due Date:-
Plan Date:-
Production Details:-
Item Code:-
Item Description:-
WH:-
Planned Quantity:-
Completed Quantity:-
Completed date:-
Rejected Quantity:
Waste and Scrap:-
Evaporation Quantity:-
Components:-
Sr.No.      Item No.   Desription             BOM Quantity Planned Quantity Issue Quantity
1     1000     RED                 20                     200                      200
2     1001     BLUE                 30                     300                      300
3     1002     Waste and Scrap -0.45987     -0.9845           -0.984567
          Total Quantity      50.45987     500.9845                     501.98888
Order Remark.
I want to see the report in this format.
Thanks with Regards,
Nitin

Nitin,
Your requirement certainly qualifies for creation of a new Production order Print form and custom print program if you are looking at printing at individual order. If you are looking at report, then certainly a custom report.
Regards,
Prasobh

Sending Production Plan to Vendor / Supplier

Dear Sir
Ours is a production unit (assembly line) we use lot of components. So I want to know is it possible to send plan directly to Vendor by E-mail from SAP.
Thanks & Regards
Vishal

Hi Vishal,
Sending out Production Plan to Vendors by email is possible but given nature of dataset involved (not documents in form of Production Orders) it may not be a very feasible option. Instead either develop a report to extract relevant Production Plan data and send it out as email.
But better look at Supply Chain Collaboration applications like SNC Supply Network Collaboration that has Outsourced Manufacturing processes catering to these kind of supplier / vendor collaboration requirements.
Hope this helps.
Somnath

Find production plan daywise

Dear experts,
I would be grateful i someone has encountered and solved this issue before and
could help me out here.
We had MRP module recently implemented and been asked to calculate plan
qty datewise for given matnr.
Having looked at table plaf,i was quite hopeful.But later on i realized that once
that moment i confirm any production order ,quantity for that gets subtracted.
that is record gets removed from plaf.
The reamining plan qty is not something which i am looking for.
I want total planned quantity till given date.
I found that i get record in mseg and qals also on confirming production.
But still not able to compile sum total for these tables additional to plaf as i couldnot find
suitable linkage between plaf,qals or mseg.
Thanx in advance.
Regards to all..

Hi,
Plz excuse me,what is the point implementing MRP by companies when a person can't even
tell the planned qty daywise technically or by developing a report.
You asked that you want to get PldOrds from SAP I just suggested some tools. Why then are you saying this?
Please understand:
- Planned orders doesn't mean "production plan" generally. The planning might be much more sophisticated (just think of purchase orders, stock transport orders, production orders as GR-like element)
- in MTO einvironment it would be important to get information on SOs, or in MTO enironment information on PIRs - these are also important factors
- stock level might be also very important
- etc
What's the sense of getting the day-wise PldOrd list? What's its purpose? In itself it may say nothing.
I just want to say that the whole planning situation should be considered and it might be very complex.
I think MRP concept is:
- proper input (requirements) + proper master data maintanace > proper output
(so, you don't have to check the PldOrd quantities day-by-day)
Of course, SAP PP module has many deficiencies, reports are far from being perfect (or doesn't exist at all) - but first please examine MD04 and try to understand how MRP works.
In my opinion a mass-MD04 would be more important than the list you want (and filtering the mass-MD04 list you could get the desired PldOrd report as well).
Regards,
Csaba

How to Reconcile Production Planning & Controling Data

Dear Experts,
Currently we are implementing the below Production Planning & and Controlling cubes.
1. Capacity Load Utilization (0PP_C13)
2. Plan/Actual Comparison Operation/Work Center View (0PP_C03)
We have updated the data in C13 and cube and doing the reconcile with standard reports.
In R/3 which T codes are usefull for C13 and C03 cube data reconciliation.
Regards
Ramu

Dear Suresh,
The View of CRHD_V1 is not giving the available capacity information.
I need to reconcile available & Target capacity information WITH Plant and work center wise.
BW Query names are 0PP_C13_Q001 & 0PP_C13_Q002
Regards
Ramu

Production Planning Guideline

Experts,
In standar SAP / SCM do we have some thing similar like " Production Planning Guidelines"? For Example this guidelines page is something where user wants to enter informations like... 1. New Product Production Start Date 2. Changes to the existing model (for eg. change 150cc engine with 180cc engine for a Motor cycle) 3. Dead lines for the sales department to submit thier requirements.
Please guide me do we have some type of transactions or reports in SAP PP / SCM?
Thanks in advance.
Warm Regards,
Krishnan

try this
http://help.sap.com/saphelp_46c/helpdata/en/51/9550a4a1fa11d189ba0000e829fbbd/frameset.htm

Is there any Utility industry company is using PP-production planning & exe

Dear All,
Is there any Utility industry company is using PP-production planning & execution module and CO-PC product costing module ??
Meaning.. any Power generation/Transmission/distribution or water production/Transmission/distribution company is using SAP PP or APO for their operation business processes.
Our client is actually an integrated Utility having very much integrated product lines like Processed Sea water for cooling, Process water for Industries, Potable water & Power for the communities/ industries.
Please let me know.. as we are planning to implement the PP and CO-PC for product costig..
As I know Tata chemical, Gujarat-India is using SAP PP module for their captive Power generation.(I have worked there as SAP CO consultant). But there is no transmission and distribution as such.
But production processes are covered by PP and product costing CO-PC is also implemented and it is giving very accurate cost per unit both for plan side and actual side.
regards,
George

Dear Pavan,
Thanks for the reply..
Yes, as you rightly mentioned..It is not very simple...Utility production is bit complicated than normally believed by majority.
But for captive production of power & water, we had used PP/CO-PC successfully for may be more than 12 years(in tatas)..
What was done in Tatas, power as a material(finished good) and BOM/ recipe for it in the PP.
(because we had used PP-PI there) and Power's BOM water is an input material and in Water production BOM power is an input material..i.e recursive BOM and system (PP/CO-PC) will take care this iteration or this give and take.
And main product was input for itself in its third stage.. And steam is input for itself and input for power/water and opposite also true..
And we got 5 different steam, like 50 pound, 100, 250 pound ..Still with all these complexities PP/CO-PC is able to give actual cost per unit accurately. So for production/generation standard PP/CO-PC will work fine...we are 100% sure...but for transmission and distribution is there any better way or solution model ??
But the main thing or the question is that whether you are able to get the actual qty of production consumption in process.
Then system (PP/CO-PC) will take care this iteration or this give and take.
And on the actual side of product costing, we have to use the material ledger functionality, wherein we can use multilevel settlement by which we can settle the actual cost variance at each stage of production to the next stage of production.
But the first reaction, when people hear about utility...it is very very simple...you are only producing one 2-3 final products..only 2-3 technologies involved...
But reality is quite different...and currently all the major utility company's production processes are outside SAP system, even when they are using SAP for all other functions/departments...but their main function is to produce water/power is outside the system..and like any other company production/generation processes are the most repeated activities in their company.
And if you see..even two repair works in say SAP PM module processes are different to each other..(still we are using a SAP module-PM for that to have historcial data and to learn from our from experience)
But production of desalination water from desalination plant is same today, tomorrow...day in ,day out...it is same..
And if we are saying we cannot co-relate input quantities with output quantities..we are essentially saying we have no control over production processes and we don't want to standardize our most repeated activity(production)
Anyway, since production processs is out of the system means, no quantitative data-production related is available in the SAP system and most of the organisation using excel for reporting of quantitative data-production related..
regards,
George

Production plan

Hi PP Gurus,
I have a following requirement.
Scenario -
1. On 25th of every month we use to get sales paln for fert for the next month from mkt dept.
2. We have almost 200 Fert, 700 halb and 3500 roh.
3 We also have @ 250 work centers.
4. Two plants for same sales organization.
5. 7 level BOMs and Multi operation routings defined in SAP.
Requirement -
Before finalization of next month's production plan I would like to know the capacity situation, based on available capacity for two different plants I will finalize the production plan so that it will be more realistic. Is there any method in SAP PP module which will meet our business scenario?
Thanks in advance.
Abhay

What Ankajah mentions is the use of Rough Cut Capacity Planning (RCCP), a tool which is available provided that you are using SOP (standar or flexilble planing). If you are entering your sales plan to SOP and then transferring to demand mgmt, then it is possible to take a first glance on the capacity requirement for the next months. This is not precise (it is not the objective) but it is very simple and act as a filter , removing some mistakes in the plan or "not affordable" quantities and giving a very fast feedback to plannign and marketing people.
The detailed capacity planning must be execited on the basis of Planned or Production orders, son you need, at least, to run the MPS for the finished and intermediate products.
In our case, we carry out previosuly the RCCP and after this coarse clean up, we run MPS and a report is generated for planning and sales people, showing
- Actual Stock
- Sales Plan
- Production plan (SOP)
- Production Plan (based on planned orders).
Based on this report, some changes in quantities are carried out.
The capacity situation is also shown for the main WCs, but the scheduler has the rights to switch between WC, so the WC used in the routing it is not always the one finally used in SFC.
Regards

AXL Get Route Plan report?

Any one have any tips on retrieving the route plan report via AXL?
Also Im wondering if any one has tackled uploading a BAT file via AXL?

Pick the developer guide that matches your CCM version:
CCM6.x: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/6_0_1/cucm_devguide.html
CCM5.1.x:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_1/nci/ccmdvCh1.html
CCM 5.0x: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/5_0_4/ccmdev.html
CCM 4.2:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/axl_prg/4_2_x/axlpg423.html
CCM 4.1:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/devguide/axl_prg/4_1_x/axlpg413.html
And a list of all programming guides for all CCM versions: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_list.html

Master Plan Report

What is mean by Master Plan Report ?
This is something used to generate master plan forecasts.
Please share your view / other information / T-code related to this ?

Hi,
As far as i'm concerned, i hope u mean to say "Master Plan Report" as "Master Production Scheduling - MPS ".
Here is some points:
The aim of MPS is to reduce storage costs and to increase planning stability. This is useful in the following cases:
- To ensure that there is good material availability, various floats and a safety stock are entered, which inevitably lead to high stock levels. Thus, high storage costs are incurred, especially for valuable materials.
- The master plan of these materials greatly influences the entire production process: The planning of the dependent parts depends on the planning result of the finished products and main assemblies, even if the finished products represent a small share of all the materials to be planned. Frequent changes at finished product level can render the complete MRP run unstable.
Check up the foll. link too :
http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
- Thaila Shree

Opportunity Product Revenue report using Narrative option

Hi,
I have created quote report using "Opportunity product revenue report" with the use of narrative option and its working fine but the problem here is if opportunity has multiple product revenue items it shows in multiple quotes. For me it should show in a same quotation if there are multiple opportunity product revenue items in a opportunity. Could anyone help me how can i achieve this.
Any help would be appreciated. Thanks in advance
Thanks & Regards
Ambarish

You need to modify report and club all revenue to single item / row.

Production Planning Report

Similar Messages

Maybe you are looking for