Production server was rebooted twice due to the cpu panic

HI.
Today production server was restarted automatically and found in the logs as cpu gets panic.
Found below logs in /var/adm/messages :
Aug  7 10:54:00  unix: [ID 330770 kern.notice] send mondo timeout [retries: 0xb8f12]  cpuids:
Aug  7 10:54:00ABCDEFunix: [ID 152697 kern.notice]  0x0
Aug  7 10:54:00ABCDEFunix: [ID 100000 kern.notice]
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu0
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu1
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu2
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu3
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu4
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu5
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu6
Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu7
Aug  7 10:54:00ABCDEFunix: [ID 836849 kern.notice]
Aug  7 10:54:00ABCDEF^Mpanic[cpu59]/thread=3005a920340:
Aug  7 10:54:00ABCDEFunix: [ID 152620 kern.notice] send_mondo_set: timeout
Aug  7 10:54:00ABCDEFunix: [ID 100000 kern.notice]
Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181310 unix:send_mondo_set+4a4 (1, 2, 31a968c90fe012, 3e, 300095b0600, b8f12)
Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 000000000183c730 0000000000000001 000000000000ffff 0031a968c90fe508
Aug  7 10:54:00ABCDEF  %l4-7: 0000000001dc7ac2 0000000000000000 00000000010b7fa0 0000000000000000
Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a1081813f0 unix:xt_some+194 (2a108181650, 2a1081814e0, f7ffffffffffffff, fffffffffffffff8, 2a1081814a8, 0)
Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 00000000018919ac 000002a1081814e0 0800000000000000 0000000000000000
Aug  7 10:54:00ABCDEF  %l4-7: f7ffffffffffffff 000002a108181520 000002a1081814e0 0000000000000000
Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181560 unix:sfmmu_tlb_range_demap+1e8 (2a1081817a0, 300155e0980, 3b, 0, 0, 1)
Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 00000000018af610 0000000000000001 00000000018b8c74 00000300155e0980
Aug  7 10:54:00ABCDEF  %l4-7: 00000000ff180000 0000000000000001 0000000000002000 0000000000000000
Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181690 unix:sfmmu_chgattr+348 (2, ff182000, 188b260, ff182000, 0, 300155e0980)
Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 000002a1081817a0 00000300155e0980 00000300155e0988 ffffffffffff0000
Aug  7 10:54:00ABCDEF  %l4-7: 0000000000001c00 0000000000000001 0000070023cc7380 0000000000000009
Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181830 genunix:segvn_setprot+9a0 (9, ff180000, 2000, ff180000, 6004cfcaf78, 2000)
Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 0000000000000000 0000000000000009 000003005ac4fbd0
Aug  7 10:54:00ABCDEF  %l4-7: 0000000000000000 0000000000000000 0000000000000009 000000000000000f
Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181930 genunix:as_setprot+174 (6004cfcaf78, 3005ebbbdb8, 2000, 9, ff180000, 2)
Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 000006004cfcafa8 000006004cfcaf82 0000000000000000
Aug  7 10:54:00ABCDEF  %l4-7: 0000000000000000 000006004cfcafc8 0000000000002000 000006004cfcaff0
Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181a30 genunix:mprotect+6c (1fff, 2000, 9, 0, 10b0c00, ff180000)
Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 0000000000000000 00000000217c0000 000000000000217c
Aug  7 10:54:00ABCDEF  %l4-7: 0000000000000001 000006004cfcaf78 000006004b175958 0000000000000000
=================
Taken hard reboot for server after that its workingfine.
Searched on google as found as reason that there no proper synchronization between processors in the time duration(1 milli sec)
Any one got above error and how its resolved.?

c1c3a78b-3a3e-43a1-939b-c1cce9126652 wrote:
there's no hardware error found on the system
checked with prtdiag and physically.there no amber led on server also.
no error messages in dmesg.
You cannot presume there isn't a hardware fault just because a CPU module has resumed its operation after a panic.
CPU's do not become disabled.    They are too fundamentally critical to a system and will always try to run when you boot a system.
I have to contact oracle for this?
Yes,.   If your system is a Oracle/Sun branded system, then you use your service contract credentials and log a Support Request.   They will likely have you run Explorer and they will analyze the information saved in the Explorer output file.
If your system is from some other hardware company (IBM or HP for example) you contact them instead.

Similar Messages

  • HT1937 hi how can i active my iphone 3gs i am in iraq and the server was stoped so what is the key for that ?

    hi every one i living in tout that have no any place that help me like apple costumer care so i have iphone 3gs i made restore for it and i cant activate it so how can i do that any all my stuff in it my songs picture and data
    any way if some one can help me i will be thanksfull for him
    good buy

    You cannot activate it because it was most likely hacked or jailbroken. Was it?

  • My hard drive was wiped out due to the iMac 1TB Seagate replacement program.

    I need to re-download my Indesign program from creative cloud. I have not found one single place to do that on the Adobe site (the link for download in my account purchase history is not functional). I haven't gotton ANY help from ANY chat or customer service. Just a run around. Any suggestions...while Adobe is charging me every month, and I'm losing work?

    Patrciedesperate55 please see http://forums.adobe.com/message/4396277#4396277?tstart=0 for information on how to download and install your Adobe Applications included with your Creative Cloud membership.  The starting point will be to visit the Creative Cloud website at https://creative.adobe.com/.

  • I just bought macbook pro this week with Lion 10.7.3 and it has shut down 5 times with the kernel due to the kernel panic(read below). Can anyone point me to the cause of this, hardware error/software error? Thanks very much.

    Interval Since Last Panic Report:  24987 sec
    Panics Since Last Report:          3
    Anonymous UUID:                    28E34CCF-E71D-459F-87C7-0418F6F6C921
    Sun Jul  8 17:30:06 2012
    panic(cpu 7 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f824892a9, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000104, CR3: 0x0000000074e1a02a, CR4: 0x00000000001606e0
    RAX: 0x0000000000000000, RBX: 0xffffff80e35690e8, RCX: 0x00000000fffc0000, RDX: 0xffffff80f07539b4
    RSP: 0xffffff80f0753990, RBP: 0xffffff80f07539e0, RSI: 0x0000000000000000, RDI: 0xffffff801598f000
    R8:  0x0000000000000000, R9:  0xffffff80f07539a8, R10: 0xffffff80f075399c, R11: 0xffffff80f07539a0
    R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x00000000000001ff, R15: 0xffffff801598f000
    RFL: 0x0000000000010206, RIP: 0xffffff7f824892a9, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x0000000000000104, Error code: 0x0000000000000000, Faulting CPU: 0x7
    Backtrace (CPU 7), Frame : Return Address
    0xffffff80f0753640 : 0xffffff8000220792
    0xffffff80f07536c0 : 0xffffff80002c4794
    0xffffff80f0753870 : 0xffffff80002da1bd
    0xffffff80f0753890 : 0xffffff7f824892a9
    0xffffff80f07539e0 : 0xffffff7f82454768
    0xffffff80f0753a10 : 0xffffff7f824835ef
    0xffffff80f0753a30 : 0xffffff7f82457e58
    0xffffff80f0753b60 : 0xffffff7f82454efc
    0xffffff80f0753bc0 : 0xffffff800065517e
    0xffffff80f0753be0 : 0xffffff8000655a5a
    0xffffff80f0753c40 : 0xffffff80006561fb
    0xffffff80f0753d80 : 0xffffff80002a3ef8
    0xffffff80f0753e80 : 0xffffff8000223096
    0xffffff80f0753eb0 : 0xffffff80002148a9
    0xffffff80f0753f10 : 0xffffff800021bbd8
    0xffffff80f0753f70 : 0xffffff80002aef10
    0xffffff80f0753fb0 : 0xffffff80002dab23
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelHD4000Graphics(7.2)[ECB872F0-8E43-3509-9952-54E37ACA DD58]@0xffffff7f8244b000->0xffffff7f824aefff
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80844000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[B8808BF9-5767-3C61-BE08-880BEF509889]@0xff ffff7f808a8000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[AC9E8F66-3DD7-3047-9B36-D914DC7C4A53]@0 xffffff7f8086f000
    BSD process name corresponding to current thread: firefox
    Mac OS version:
    11D2097
    Kernel version:
    Darwin Kernel Version 11.3.1: Thu Feb 16 19:05:38 PST 2012; root:xnu-1699.25.42~1/RELEASE_X86_64
    Kernel UUID: CA8A35C4-935B-3165-B79D-3D7FE9279A01
    System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
    System uptime in nanoseconds: 11622306836776
    last loaded kext at 8921847352221: com.apple.filesystems.ntfs          3.10 (addr 0xffffff7f80bb6000, size 376832)
    last unloaded kext at 8981688293629: com.apple.driver.AppleUSBCDC          4.1.17 (addr 0xffffff7f80792000, size 12288)
    loaded kexts:
    com.apple.filesystems.ntfs          3.10
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AGPM          100.12.63
    com.apple.driver.X86PlatformShim          5.0.0d0
    com.apple.driver.AppleHDA          2.2.0f3
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMikeyDriver          2.2.0f3
    com.apple.driver.AppleIntelHD4000Graphics          7.2.0
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleSMCPDRC          5.0.0d0
    com.apple.iokit.IOBluetoothSerialManager          4.0.4f15
    com.apple.GeForce          7.2.0
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.driver.AudioIPCDriver          1.2.2
    com.apple.driver.AppleMuxControl          3.1.20
    com.apple.driver.ApplePolicyControl          3.1.20
    com.apple.driver.AppleLPC          1.5.8
    com.apple.driver.AppleMCCSControl          1.0.28
    com.apple.driver.AppleIntelFramebufferCapri          7.2.0
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.4f15
    com.apple.driver.AppleUSBTCButtons          227.4.2
    com.apple.driver.AppleUSBTCKeyboard          227.4.2
    com.apple.driver.AppleIRController          312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.2.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.0.3
    com.apple.driver.AppleFWOHCI          4.8.9
    com.apple.driver.AirPort.Brcm4331          530.4.18
    com.apple.driver.AppleSDXC          1.2.0
    com.apple.iokit.AppleBCM5701Ethernet          3.1.2b2
    com.apple.driver.AppleUSBHub          5.0.0
    com.apple.driver.AppleEFINVRAM          1.5.0
    com.apple.driver.AppleAHCIPort          2.3.0
    com.apple.driver.AppleUSBEHCI          5.0.0
    com.apple.driver.AppleUSBXHCI          1.0.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.6
    com.apple.driver.AppleSMBIOS          1.8
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient          193.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.1
    com.apple.driver.AppleIntelCPUPowerManagement          193.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.0
    com.apple.iokit.IOUSBMassStorageClass          3.0.1
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.0f3
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOFireWireIP          2.2.4
    com.apple.iokit.IOAudioFamily          1.8.6fc16
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleHDAController          2.2.0f3
    com.apple.iokit.IOHDAFamily          2.2.0f3
    com.apple.driver.AppleGraphicsControl          3.1.20
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.3
    com.apple.driver.X86PlatformPlugin          5.1.0d16
    com.apple.driver.AppleSMC          3.1.3d7
    com.apple.driver.IOPlatformPluginFamily          5.1.0d17
    com.apple.nvidia.nvGK100hal          7.2.0
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.NVDAResman          7.2.0
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.4f15
    com.apple.iokit.IOBluetoothFamily          4.0.4f15
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.1
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.1
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.4
    com.apple.driver.AppleUSBMultitouch          230.3.3
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.0.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.0
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.7
    com.apple.iokit.IOCDStorageFamily          1.7
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.0
    com.apple.driver.AppleThunderboltNHI          1.5.5
    com.apple.iokit.IOThunderboltFamily          2.0.0
    com.apple.iokit.IOFireWireFamily          4.4.5
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.0.0
    com.apple.driver.AppleEFIRuntime          1.5.0
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          331.3
    com.apple.iokit.IOStorageFamily          1.7.1
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.6.8
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBookPro9,1, BootROM MBP91.00D3.B02, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.1f170
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.4.18)
    Bluetooth: Version 4.0.4f15, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: OPTIARC DVD RW AD-5970H
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FreeAgent GoFlex, 0x0bc2  (Seagate LLC), 0x5021, 0x1a120000 / 4
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 6
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 4

    bring it to the store where you bought it and ask for their help and make sure you bring your receipt with you

  • Lync Server 2010 Control Panel - "navigation to the webpage was canceled"

    Hi All,
    I just installed Lync Server 2010. The SQL 2008 is installed on a separate box and both servers are on Windows 2008 R2.
    However, when I try to start the "Lync Server 2010 Control Panel"  i get a blank page with the following message "Navigation to the webpage was canceled"
    The Installation had no errors and went well. But I did have one problem in the Topology Builder where is asked to create a File Share and asked for FQDN and File Share. I entered "Server1.domain.com" and File Share "Poolshare" but it did
    not like it and error with a red cross saying.. 
    "FQDN Server1.domain.com is already used in this topology"
    So in the end I just change it to "Server1" then published and ran the installation sucessfully and all services are started OK
    Any idea? could it be that the file share is not using FQDN?
    Thanks
    ECL

    I have reveiwed this topic but have not been able to fing my answer. I am getting the same result when attempting to connect to the Lync Control Panel and the webpage saying "navigation was canceled..". Here are the details, any assistance is greatly
    appreciated:
    I have an existing OCS 2007 R2 server setup in the domain. My domain is company.CORP. It is a Standard Edition server for IM and Presence only. There is an Edge server as well and I have PIC enabled. My sipinternaltls SRV record to the current SE Front End.
    All works great. There is a SIP.company.com record in the domain too. I am standing up LYNC 2010 environment on HyperV and ran topology builder twice because I had to fix a name. (I see in Mac's comment that I need to run step2 again. Why is that?)
    My Share is on the HyperV server that is hosting the Front End server but they are completely different servernames. My topology published successfully and create some data in the File Share and the Backend DB was created and populated with tables. The certificates
    were successfully applied and all services started right up. The latest version of Silverlight was installed and the server was rebooted. Still the darn White Page with 'Navigation to the webpage was canceled'.
    I am able to go into IIS and launch the Control Panel successfully by browsing on the "cscp" directory for the Lync Server Internal Web Site. I can also connect to the Control Panel by using the
    httpS://admin.company.com/cscp but I have to put  'cscp ' in the path. I cannot browse AD using the Control Panel to find my TestLyncUser1 account but I can find the account, and successfully enable
    the account, using the Lync Management Shell. The account was enables and was able to successfully login to the Lync FE server (manually, since the SRV record point to OCS).
    This is where I am stuck. Why won't it launch from the Programs File Tool and why do I have to designate the CSCP in the URL? I am Not sure why I couldn't browse AD successfully in the Control Panel yet I could with Powershell. I will begin troubleshooting
    that issue next. Could it be because my sip.company.com record points to a different OCS Pool? Or my SRV internaltls record points to the OCS Pool? Microsoft supports standing up the two environments side-by-side and migrating but maybe I am missing something.
    Any ideas anyone?
    I want to add that I will be having a FE Pool and have named and published my second FE but I have not installed it. The Pool VIP is created in DNS and only pointing to FE1 right now.

  • FTP folder location is not showing in the production server but exist in the development server.

    Hi,
    a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing  but its existing in my laptop version
    EX: - t01/app/_res folder
    When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
    but "_res" folder is shown in my development environment.
    I tried with winscp FTP software in the production sever , and was able to access the  "_res" location through the FTP software. What could this be?  a BIDS sofitware version issue???
    VS 2005 Version in development server
    -Is 8.0.50727.42(Premier Partner ENU)   .net framework is 4.5.1
    VS 2005 Version in production server
    -Is 8.0.50728 (Premier Partner ENU)   .net framework is 2.0 Service pack 2.0
    thanks.

    When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
    you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
    Jan D'Hondt - SQL server BI development

  • How to find the date when object is moved from quality to production server

    Hi Experts,
    I am working with BADI ZMM_PUR_REQ_PROC_001-Method Check and BADI ZME_PROCESS_PO_CUST-Method Check.
    I need to add a check that a particular logic should be implemented only after this object is moved to the production server.
    How can i check the date when an object (in my case this BADI) is moved to the production server?
    <Removed by moderator>
    Thanks in advance.
    Edited by: Vinod Kumar on Aug 1, 2011 10:55 AM

    Hi Sakshi,
    So your reqt is that the documents created after your Transport implementation date should pass the check and others (old ones) should ignore.
    I will recommend, if at all possible, to make all the old documents compatible to your check by doing a separate initial loading /one time activity to avoid this kind of hardcoding.
    IF not at all possible to do so, then I think you should better hardcode your Transport req number and fetch date (AS4DATE) from E070 table and only if any entry exists, use that date as your required date. I believe this will be the date of transport imported in the target system.
    You can avoid hardcoding Transport number by picking latest transport with respect to your object (BADI) using E071 table, but that will go wrong once you send any future changes in this BADI to Prod, so better to hardcode the transport.
    BR,
    Diwakar

  • FRM-92100 Your connection to the server was interrupted in OAS (10.1.2.3.0)

    Hi,
    A user in WAN getting below error while accesing forms applicaiton
    But the same is working in LAN without any such type of Error.
    FRM-92100 Your connection to the server was interrupted
    This may be the result of a network error,or a failure on the server.
    you will need to reestablish your session..
    Regards
    kirana

    Hi Alex,
    Thanks for your Reply.
    1.When you get the error click on the details button and provide the error message
    FRM-92100 Your connection to the server was interrupted.
    This may be the result of a network error,or a failure on the server.
    you will need to reestablish your session.
    Details...
    Java Exception:
    java.lang.IllegalStateException:cannot open system clipboard
    at sun.awt.windows.WClipboard.openClipboard(Native Method)
    at sun.awt.windows.WClipboard.setContents(Unknown Source)
    at oracle.forms.engine.Runform.setClipboardString(Unknown Source)
    at oracle.forms.engine.Runform.onUpdate Source)
    at oracle.forms.engine.Runform.onUpdateHandler(Unknown Source)
    at oracle.forms.engine.Runform.processMessage(Unknown Source)
    at oracle.forms.engine.Runform.processSet(Unknown Source)
    at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
    at oracle.forms.engine.Runform.onMessage(Unknown Source)
    at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
    at oracle.ewt.lWAWT.LWComponent.redispatchEvent(Unknown Source)
    at oracle.ewt.lWAWT.LWComponent.processEvent(Unknown Source)
    at java.awt.Component.dispatchEventlmpl(Unknown Source)
    at java.awt.Container.dispatchEventlmpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
    at java.awt.Container.dispatchEventlmpl(Unknown Source)
    at java.awt.Window.dispatchEventlmpl(Unknown Source)
    at java.awt.Component.dispatchEventlmpl(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
    2.Does this happen with all forms /even with simple form test.fmx?
    No,This does not happen with all forms neither with particular form it occurs randomly or also it wont occurs.
    3.When this issue occurs does other users who are connected are affected ?
    No other users are not affected,but if the same user close error window & if he opens the same application again
    he can connect.
    4. When this issue occurs does new users/connections are allowed?
    Yes new user connection are allowed after this occurs.
    Thanks
    Kirana

  • Warning massage at the time production order coinfirmation if PM due .

    Dear all,
    Please suggest me how to configurein in  SAP,   System provide massage at the time of production order coinfirmation if PM due of  the eqipment in  same workcenter .
    Raghav

    Hello,
    Actualy this will taken care by SAP in different way when one of the Technical Object is Under Maintenance The Capacity Of Production Work Center is also get automaticaly get shifted which we can see in Capacity Levelling or Evaluation.To POP UP the Message for Your Message you need to go for Development

  • Connection to the server was interrupted.

    We are migrating application from 6i to 10g R 2 on Enterprise Linux 4.
    we are able to run several report from our generic code. but in some reports where the processing time is more or the time required to show the report is more than in that cases we are getting the FRM-41214 error after following line.
    reportserverjob := RUN_REPORT_OBJECT(report_id);
    first message after this line's execution is
    FRM-41214 Unable to run report.
    and then another message dialog box comes with follwing message.
    FRM-92100 Your connection to the server was interrupted this may be the result of a network error, or a failure on the server.
    you will need to re establish your session.
    We have checked the path and the existance of the report as well and as we are able to run another report at the same time, there must be no such problem of report server as we have verified the report server is up.
    Please help us to solve the problem.
    Thanks in Advance
    Bhadresh

    Is this a fresh installation?
    Was this working before? If so, what changes have you done recently?
    Please refer to the following note and review the suggested solutions.
    Note: 189867.1 - Forms: 9.x and 10.x: Troubleshooting FRM-92050, FRM-921xx
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189867.1
    If the above does not help, then I suggest you enable debug to collect more details about the error.
    Note: 419839.1 - How to enable Apache, OC4J and OPMN logging in Oracle Applications R12
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=419839.1
    Note: 422419.1 - R12 - How To Enable and Collect Debug for HTTP, OC4J and OPMN
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=422419.1

  • Old SD and MM documents shall be deleted on productive server

    We have the situation that the same SD and MM documents sitting on two different productive servers. This is caused due to the migration from 4.0B to 4.7 some years ago. Some of our companies were kept on 4.0B with SD and MM enviroment on a separate server and the other companies were transfered to a new server. At that ttime the new server was build as copy from the old 4.0B server and then migrated.
    For the migration to ERP6.0 we like to clean up the current productive server. During the preparation we noticed that the old SD and MM documents don't fit into the new management requirements. Therefore we woudl like to get rid of it. Problem is that we will not archive these documents. Furthermore there a lot of open purchase and sales orders that can't be closed.
    Question: Does anybody have a solution how we can delete all of these SD and MM documents before we migrate the server to ERP6.0?
    Thanks

    I would use the System Landscape Optimization service for that purpose, they can provide you with tools to do those "merging" of two systems.
    http://service.sap.com/slo
    (It´s consulting - so $$$).
    Markus

  • Loading Last three days of delta records in Production Server

    Hi
    I have a Process Chain in BI-Production Server which runs dailiy  and loads the delta records dailiy  . I have 'Custom DataSource' which loads the data from QM-Tables .
    My Process Chain is failied due to the "Caller 09 Error for the datasource". So now i transported that datasource from R/3-Dev To R/3-Production and replicated into BI-Production Server .
    So how can i load the delta records of last three days . I mean , how can i scehdule the last three days of delta updated records .
    pls let me  know
    regards
    Kumar

    Remove the failed request. Repeat the delta. This will upload previous failed request
    Repeat the delta again with infopackage selection for 3 days

  • Features missing in production server

    Hii,
    I have an application where i have file upload and download features.The features of file upload and download is visible in development server but not in production server.
    Any clues on this ??

    Hi Parama,
    Check whether the activity moved to production server was successfully build to the server & was not broken.
    Does the activation & transport was successful ?
    Regards
    Chander Kararia

  • Production Server is Clustering environment..

    Dear Sap Gurus,
    *The Production Server is in Clustering environment, so the scenario is:-- *
    PRD1 =  Server1 (say ip= 192.13.12.10)
    PRD2 = Server2 (say ip = 192.13.12.11)
    PRD = To create join b/w the two Application Servers
    Now I have created a Report which gets downloaded(same path given in both PRD1 and PRD2) in the Application Server...
    Now while searching for the file path, due to clustering enviroment sometimes SYSTEM creates the file in PRD1(IP = 192.13.12.10) and sometimes in PRD2( IP=192.13.12.11).....(Randomly).....
    For Example: (say) A file named "abc.xls" has been created in PRD1.
    Main Problem which I am facing is while downloading this file to my Desktop.....
    I am using the Transaction CG3Y for it and when I'm providing the filename(with path) in the Source it says "file not found"....
    I guess the reason for this is that CG3y transaction is hitting the PRD2 Server where file does not exists.So kindly guide so that I am able to download the file to my Desktop......
    Pls guide......
    Thanks and Regards,
    Abhishek Banerjee

    Try to map the drives with NFS. Might resolve the issue.
    Regards
    Parag

  • I recently re-installed Lion due to a kernel panic prob. A day after reinstallation, twice in a row it happened, but it stopped.

    Re: I recently re-installed Lion due to a kernel panic prob. A day after reinstallation, twice in a row it happened, but it stopped.
      I want to know if this happened just because it was recently installed, or is the kernel panic still bugging my computer? The kernel panics were 3rd party extensions. If the extension is still connected to me, how do I remove it? Again, It only happened twice since reinstallation.

    The panic did not have a thing to do with reinstalling Lion or not. There is some other cause. Post your recent panic log.

Maybe you are looking for