Production Version Not Reflecting in Production Order

Hi Experts,
I have a query, I have made alternative BOM and second Production Version of a FG Today. Production Version is very much Ok (Green). I have clearly mentioned Alternative BOM 2 in alternative bom.
When creating production order thru CO01, production version is not coming in Co01. Message is coming " No valid production version is found for this material".
Kindly confirm me what mistakes I have done.
Regards
GR
Edited by: G R on Dec 18, 2008 9:48 AM

Dear G R,
1.Check whether your prod.version has been locked and what value have you maintained in MRP4 view
BOM selection method.check whether has it got the value 02.
2.Also in OPL8 - under planning tab select the option for manual selection of production version.
check and revert back.
3.Also check the validity dates.Also your production order start date.
Regards
Mangalraj.S

Similar Messages

Change Production version during creation of Process Order COR1

Hi,
Scenario:
Based on the entered Material, Plant and Order type system need to trigger a popup asking the user to select the Production Version. This should happen before clicking on SAVE button, so that all the values will be populated correctly based on the changed VERID.
I did not find a user exit that enables to change the Production Version (VERID) value. So I thought of displaying the popup in the user exit EXIT_SAPLCOZF_003 which will be triggered before initial screen appears, export the selected value and pass it to a User Exit or BADI where VERID can be changed. But cannot find a user exit to do it.
Please help me find a User Exit or BADI to change the Production Version during creation of Process Order using COR1 transaction before clicking on SAVE button.
Thanks,
Manoj.

Hi Manoj,
So - almost four years later - I saw your post and I saw myself in the very same situation as you did...
I found a solution for those who wants to change the production version of the production order from the sales order creation: create an enhancement in the function module 'MD_VERSION_SELECTION' and you are good to go.

Production version not found --rep. man.

Dear all,
when i am doing backflush through MFBF in repetitive man. i got below error.
Production version not found
Message no. RM149
Diagnosis
The system cannot find a production version with the data you entered.
Procedure
Check and correct your entries. Check especially whether the production version is valid on the defined posting date.
A production version must exist for a reporting point backflush in particular.
plz guide me .

Hi,
It seems Production version is not maintained. For REM production version is mandatory.
Go to Matrial master MRP 4 view click on production version...pop up screen appears..enter the version number 0001 valid from and valid to.and click on details.
Enter lot size if u have maintained any.
Select rate routing under rate based planning and enter the group counter.
Select BOM
Check REM allowed, enter the production line, enter the issuing and receving location.
click on check..green light will be displayed..if it is not displayed check the dated u have entered and correect the same...if green light is displayed production version exists...
Try and come back...
Awd if helpful
Ramagiri

Selecting New Production version while Splitting a Production Order

Hi SAP Gurus,
Is there any option of selecting a New Production Version for a split Production Order?
I have a production Order with three operations 10.20 and 30. This production Order is curently using the Production Version 001. Now , i have split the production order at Operation 30 and want to select new production Version 002 for the same.
Can you please let me know if this is possible?

Hi Sandeep,
   If you don't mind can you please let me know for what purpose you want to assign a new production version to production order after splitting at operation 30?
   To quickly recap, Production version is used if you have alternative BOM or alternative routings for a material. Based on Production Version that you have assigned in Material Master - MRP screen, your Routing and BOM details are selected.
    So how is this Production Version 002 different from Production Version 001 - is it in terms of routing or bom?
With Best Regards,
Srinivas

Product version not found

Hi Experts,
I am create Integration scenario while assigning the Product version i was face Product version not found error.
I choose the different product version it is working. If you know solution please help me.
Thanks & Regards,
Veera.

Hi ,
Please check in the SLD once for the product version which you are trying to use.There might be the case that it had been deleted by someone.
access SLD from XI and check if someone has deleted your software component from SLD
Do a sld cache refresh. check for locks Integration Buileder -> administration->admin of locks and caches.
Last option restart the XI service and see if it starts working
Regards,
srinivas

Recent Workflow Version not active in Production server

Hi Gurus,
Recently, I made a minor change to an existing workflow. After the changes, it was transported to QA and Production. In QA, the changes are reflected and when I click on the version overview tab of the workflow, I can see that my last changed version is the active version. But, In production server the last version is not active. The previous version before my changes remains as the active version. Though it shows my version their, it is not active and the change are not yet reflected.
To solve this I tried following ways,
1) I refreshed the buffer in SWU_OBUF in Production, but no improvements.
2) Then I tried to check, if there could be any errors when I activate the workflow in Development server. But, there are no errors except few warnings like some of the variables declared for the workflow but not used. So, this also does not help.
3) Then I tried changing the workflow to tag it again to a transport request thinking in a way, previously there might be a problem in attaching the active object. But, even after transporting the second changes, the workflow version is still not active in Production. But, it is active in QA.
Please let me know, if I can try any other ways which is not mentioned above!
Thanks a million.
AM

Hello,
Check the transport logs for any errors and make sure all the transports have been done, and in the right order.
What was the minor change that you made?
You can get situations like this when you eg create a task, don't transport the task, and then add the task to a workflow and transport the workflow. In Development all will be fine, but not so in QA and/or Production.
regards
Paultje Bakker
Hanabi Technology

Production version selection based on Process order type

Hi,
I have the following requirement.
A material is having two production version one is for R&D and one is for regular production. Now two process order types one for R&D and one for regular production. Now during creation of process order if we use order type of R&D then it has to select production version of R&D and if we use order type of regular productionthen it has to select production version of regular production. This selection has to be happened automatically. How this can be configured.
Thanks
Vinamrath.

Dear Kumar,
Assuming the production version selection is automatic in the order type dependent parameters,then during order creation this
can be automated only through validity date of the production version or else by locking the production version manually which
should not get picked or else only through different Lot Size.
Check and revert.
Regards
Mangalraj.S

Product is not determined while creating Order

Hi Experts,
I am trying to create an Order from CRMD_ORDER. I am giving a Valid Product number which is present in the master data. But still I am getting an Error that the Product is not present in the System. I am getting this error even when I am selecting it from F4 help. Please help me to solve this issue. Is their any type of configuration which need to be maintained? Please tell me as I am a Technical guy.
With Regards,
Anomitro Guha

Hi,
Please check following:-
1. If the product you are selecting is there in CRM first. Please check the product in transaction code COMMPR01
2. The item category determination settings in CRM SPRO
3. The sales area of the customer and the product are same in the transaction type you are using.
4. The product (created in CRM or downloaded from ECC) has the ITEM CATEGORY GROUP maintained.
Hope this will help.
Regards

Changes to HTML template not reflected in production

Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
Shruti

Hi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine

Modified WAD report does not reflect in Production even after transport

Dear Friends,
We are using BI7.00 with Nw2004S. One of my report had been created in WAD (Web application designer). I have transported this report to production from Quality as in our case the Quality client is the base client for WAD report development. I collected the objects from the transport connection in RSA1 and transported the request.
After the above since user wanted changes in the report,i again modified the report and checked. Everything was fine in my Quality client but when i transported it to production, the new modifications are not appearing.
I have done the transport more than 2 times but still not changes is shown.
Experts kindly provide your helping hand.
Regards,
M.M

Dear Arun,
Thank you for your feedback. As per your guideline we executed the program RS_TEMPLATE_MAINTAIN_70 in both QAS and PRD clients and found that the html codes are same. Moreover we are still not able to get the modified web items in our PRD clients. All the caches were deleted and still no improvement. Following are the other activities and obeservations done by us.
1) Deleted the web item again in QAS client, Saved the report, recreated the web item, saved and then collected it in the request and transported and found that it is still not reflecting.
2) In our observation, we find that the objects are found collected in the transport request and the task of the transport request contains no element. We do not know whether it is right.
3) Missing of authorisation was also checked and found that it is not the culprit.
In the above context we are still groping in the dark. Kindly provide your expert comments.
Regards,
M.M

Components of a product are not visible in service order

Hi all,
I have created a product and assigned various other products as components to it. For e.g i have created a refrigirator and assigned components such as compressor etc. But after i assign the product while creating service order , i am not able to see the components. For e.g i can only see refrigirator and not compressor.
I want even the components to be visible in the transaction Can anyone help me in doing that?
Regards,
Madhu.

Hi Madhu,
My Understanding:
1. When you enter the main/header product in the item details, the item catefory for the header product gets determined.
2. Your components can also be seen below as sub-items automatically, but the item category is not determined.
Tell me if my understanding is correct.
If Yes, u need to maintain the item category determination for the sub-items or components as well.
Transaction Type: Put the service order transaction type
Item Category Group: Check the item category group of your component product in COMMPR01 (Material tab/ Sales and Distribution Tab)
Item Category Usage: Leave it Blank
Main Item Category: Put the header product item category
Item category: Put the desired item category here.
Also ensure that in the customizing of the header item category, u have maintained the Structure Scope as A- Single Level Explosion of Structured Products.
Regards,
Shalini Chauhan

Credit check not reflecting in sales order level

Hi,Experts,
I have configured a dynamic credit check,but even if the credit limit for the customer is crossed,still it is not reflecting in the sales document level,and allows me to create the sales order.please guide me as where should I check the error in the system,
Thanks in advance,
A.Chakraborty

yes it is active for order type,and active for item category,as well as the dynamic credit check setting that is the combination of
risk categoryccaccgrp(for sales order) ,is also done,still when the sales order is created,and even though the credit limit has crossed it is not throwing any message ,which is supposed to appear in the sales order,when we are going to save...
please revert bach to me,to guide me about any further areas i need to explore within the particular area so far as the setting is concerned.
Many thanks,
Anshuman

Amount in PR not reflected on Internal Order .

HI SAP,
When i creating a PR i got sap message said "Do Not assign any objects in cost accounting to account XXXXXXXX ". Then i just press enter because it just a warning from SAP.
My total Valution Price in PR is 10K. My PR is using Account Assignment A and have internal order (BUDGET)
After saving. i check my internal order report (S_ALR_87013019), than i noticed that my total amount in PR is not reflected on My internal Order list.
is there any condition missing ?

>
Nizamkz wrote:
> HI SAP,
>
> When i creating a PR i got sap message said "Do Not assign any objects in cost accounting to account XXXXXXXX ". Then i just press enter because it just a warning from SAP.
>
> My total Valution Price in PR is 10K. My PR is using Account Assignment A and have internal order (BUDGET)
>
> After saving. i check my internal order report (S_ALR_87013019), than i noticed that my total amount in PR is not reflected on My internal Order list.
>
> is there any condition missing ?
The above warning message meant that your cost accounting is not configured for this account, in this case your account was not linked with internal orders, thats why it did not pick up the price there. You need to consult with FI to get this account fixed, or use some other account which is linked to internal order.

Service order component not reflecting in sales order

Dear All,
I have mapped service notification type & service order type now if i create sales order directly from the service notification sales order is not reflecting the componets assigned in service order for that service notification. can anybody help me out?

Sanjay,
This is not standard, although it is possible through development (e.g. via action-box).
However, there is the advance shipment functionality in the service order which does allow you to create a sales order from the service order components...
PeteA

No of operations in routing &Overlapping not reflection in Production order

Greeting for all gurus.
Process
We have three set of operations , one will be blend, , other will be cured and the third will be finished goods.
Basically one FG and three components , the components will be consumed in the first process. The same FG materials will be used for the 2nd / 3 rd Process
,1) we want to confirm the first set by making auto GR/GI
2) The Overlapping is 8 weeks , the 2nd operation should start , after that and the third operation should wait for 6 days . 2ND operation is confirmation only.
3) The third will be for standard process, Only GR
We have to use the same materials . Say 1st process O/P will be 50,000 and second process will be 40,000 and third will be 30,000. We want to account the loss in between the 1st and 3rd operation . 2 nd operation , no need to record .
Requirements - Discrete Manufacturing
u2022     How to set the control key for three operations.
u2022     How to confirm every stage in a single production order.
u2022     How to consider all the operation days in the Production order
u2022     How to report loss in various stages
u2022     How to print all the operation at various stages in the shop floor
Any help will be highly appreciated
Thanks
JJ

Thank you very much
As you use single production order, input the overlapping time in routing in "Min Overlapping time" = 8 weeks (in no. of working days) for the first operation and 6 days for the second operation after selecting "Required Overlapping". ( If you mean it as wait time, you can control the same with the wait time in work center).
    ----I already set it , but it is not considering the days , it took only the base qty and no of hrs calculation
in the prod order ,Our base qty and hrs will set for two hrs only . the remaining 6 weeks is not consider -
With Single Production order, you cannot do goods receipt after the first operation. Since 2nd and 3rd operation are pending, why do you want to do goods receipt at this stage?
----- We want to account the loss , as it will be loosing pounds at various stage -
Carry out confirmation for the sequence of operations in CO11N with the yield qty and use reason for variance as the loss of qty. Using confirmation tables, create z-report to know the actual qty after the last operation. ..
--- Where to set the sequence of operation - i am getting error , No zero sequence ---
I want the system to consider the 7 weeks for this production time. How to do this ?
You can print the operations from pull-down menu in CO02 - order - settings - List control - Op. control ticket

Production Version Not Reflecting in Production Order

Similar Messages

Maybe you are looking for