Credit check not reflecting in sales order level

Hi,Experts,
I have configured a dynamic credit check,but even if the credit limit for the customer is crossed,still it is not reflecting in the sales document level,and allows me to create the sales order.please guide me as where should I check the error in the system,
Thanks in advance,
A.Chakraborty

yes it is active for order type,and active for item category,as well as the dynamic credit check setting that is the combination of
risk categoryccaccgrp(for sales order) ,is also done,still when the sales order is created,and even though the credit limit has crossed it is not throwing any message ,which is supposed to appear in the sales order,when we are going to save...
please revert bach to me,to guide me about any further areas i need to explore within the particular area so far as the setting is concerned.
Many thanks,
Anshuman

Similar Messages

Credit Check while creation of Sales Order for Item Category Purchase Req

Hi Experts,
We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
The settings were same for all the Item categories.
1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
Thanks
Rajanikanth

Hi,
None of the Item Categories has Create PO Automatically.
Thanks
Rajanikanth

Availability checking user exit at sales order level

Hi ,
Is ther any availability Check user Exit at the sales order level?
1)I want to make Confirm quantity to zero in the sales order level
2)The block confirmation is set to VBEP-BMENG to "0" for each item where VBEP-LIFSP =Z1
Is ther any related USEREXIT in the sales order to make confirm quantity to ZERO
(VBEP-BMENG=0)
Ragu

may be you can try putting some logic is MV45AFZZ in USEREXIT_MOVE_FIELD_TO_VBEP
or in the exitSDTRM001 - Reschedule schedule lines without a new ATP check.
Regards
Sai

Dynamic Credit Checks - Different Horizon for Sales Order & Delivery

Hi Experts ,
had a query . I am testing a scenario for Dynamic credit Check where the Horizon is ZERO for Sales Order & 3 Months Horizon for deliveries. How should the system behave in such a case. What would be the best way to test whether system behaviour is ok as per this expectations.
Also I would like to know whether "0" horizon for sales order means that system looks into the entiire list of open sales orders or the horizon of check is only upto the end of the current month . In FD32 the curent date is indiacted as the horizon date. While creating sales orders today I found dynamic block for 0 horizon is only working for sales orders with availabilty date upto 7th July '10 which neither covers the existing month-June & neither full of July. Beyond that there is no dynamic block soccuring.That made me a bit confused .
Please advice with you valuable inputs.
Thanking You.

Hello Sai ,
thank you for the response. Had already checked note . But this does not speak about the implication "0" M horizon of dynamic credit check . What is coverage for that ?

Credit Information not populated on Sales order

Hi - I'm trying to post some sales orders to check the credit checking settings. However, I noticed that when I create a sales order, the Credit control area, Credit account all blank in VBAK table. Due to this, the settings in OVA8 are not working.
I checked the following so far.
1. Company code is assigned to the Credit control area
2. Sales area has been assigned to a credit control area (same CCr Area as in # 1)
3. Customer account has been linked to the credit control area (again same as # 1)
4. We are not using exit EXIT_SAPV45K_001
5. In transaction OVAK, the sale document type has been assigned to 'Automatic Credit checking: D' and Credit group 01.
6. I have a simple credit check: Block all document with Max Doc Val 0.01 in OVA8
7. Credit active is Checked for Item category (using TAN in this case)
8. In transaction OB45, update group in the relevant credit control area is set to the default setting of "12".
9. In transaction OMO1, For info structure S066, Synchronous update has been set.
Can someone please let me know if I've missed something and point me in the right direction?
Kind regards,
VH

Thanks All -
I've checked Subtotal A, and it exists!
Still, the credit data is not shown on the Sales order (VBAK) I'm thinking at the minimum, the Credit control area and the Credit account should be populated. But why is it that these fields are blank on the sales order
Any pointers?

Credit check for the first sales order

Friends,
We are using dynamic crdit check.
we set credit limit for Rs 100000. Now when I am creating first sales order for Rs. 500000, system allow to do it.
Practically it should not allow to do it. How to handle this? please help.
Thanks

Dear Pratap,
Enusre that in OVAK, you have the check credit as D and the credit group as 01.
The credit check will be either static or dyanmic based on which indicator you are choosing in the transaction OVA8.
Open order:Orders which are not delivered and relevant for credit check.
Open delivery: Delivery which is not invoiced and relevant for credit check.
Open billing doc: Invoice to which accounting document is not genereated yet in the system.
Open Items: Accounting documents which are due from the customer, and cleared in the system yet.
These are all the basic definitions to explain the difference between static and dynamic check.
The difference between the static and dynamic check is as below.
In case of static check, all the open order, open delivery, open billing document, opn item will be considered during the credit check.
In case of dynamic check, you will be specifying the HORIZON period which will restrict the open orders to be considered for a certain period.
That is to say, if you keep the HORIZON as 2 M, then the orders which are due for delivery beyond 2 months will be ignored; remaining open orders, open delivery, open billing document, open itms will be taken into consideration as it is.
If you don't use the HORIZON period, I would suggest you to activate the indicator STATIC rather than dynamic. Hope this clarifies.
Please do revert if need any more clarification.
thank you
Venkatesh SP

Sales order BOM is not reflecting in sales order

Hi Guys,
I have created a sales order in which all the items of the sales BOM (ex:A-a1,a2,a3).have been exploded.My strategy is make to order and i am dealing with valuated stock.
Now i have created sales order BOM for that particular sales order thro cs61.I have made some changes in the item level (ex:A-a1,a4,a5) in the order BOM i want these changes to be reflected in my sales order is there any way to do so...
RAMASWAMY

Dear,
You have to configure BOM explosion in VOV7 - item category settings - BOM area and you can specify whether it is a single level or multi level explosion etc., Depending on the configuration made here, the BOM explosion takes place in the order.
Regards,
R.Brahmankar

Service order component not reflecting in sales order

Dear All,
I have mapped service notification type & service order type now if i create sales order directly from the service notification sales order is not reflecting the componets assigned in service order for that service notification. can anybody help me out?

Sanjay,
This is not standard, although it is possible through development (e.g. via action-box).
However, there is the advance shipment functionality in the service order which does allow you to create a sales order from the service order components...
PeteA

Status not updated at sales order level though the billing is done.

HI,
This is related Third party sales, where i created order, billing but document status has been showing as BEING PROCESSED.
There are 3 line items, where one item status is showin as completed, and for other two line items status is being shown as BEING PROCESSED.
PLEASE LET ME KNOW THE REASONS.

Read the following OSS notes to understand the status related to third party orders?
1) Note 210500 - Billing status of a third-party item
2) Note 549818 - FAQ: billing status for third-party items in sales order
Regards,

Material Mandatory not showing at sales order level error

Hi Every one,
According to my client Requirement at the time of sale order creation material is mandatory , but i tried through Incompletion log
its showing material mandatory but the problem is after entered the material in one line item when i try to save the sales order
system is asking enter the material again ie one more line item
so i have avoid the that error and how to map into SAP system suppose to ask onetime material is mandatory
Can any one guide me how to solve the issue

Hi Prasanna,
As Amit Suggested, in user exit USEREXIT_SAVE_DOCUMENT_PREPARE in MV45AFZZ, you need to add a small 2 liner code telling the system that if VBAP-MATRN is blank then give an error message.
I had the same requirement and I have used it and it works perfectly fine for me. Let me know if you have any further questions.
Regards,
Rohan Gudavalli

Condition type is not reflecting in sales orders

hi,
i have created two condition type like jser (service tax) and other one is jste(service tax +cess) but in pricing procedure jfact it is reflecting but while making contract order these two condition type is not accessing.
please help in this connection.

Hi,
After Creating the CONDITION TYPES you need to assign the condition types in the PRICING PROCEDURE
goto the
SPRO->FINANCIALACCOUNTING>FINANCIAL ACCONTING& GLOBAL SETTINGS>TAX ON SALES /PURCHASE>BASIC SETTINGS--->CHECK CALCULATION PROCEDURE.
Here select you procedure and assign the CONDITION TYPE
regards,
santosh

Cash discount calculation at invoice level not at sales order level

Dear Friends
while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
where these setting incurred in this process. i have verifies all the routies, there is no such kind of logic to calculate in a particular palce.
treat this one as high priority and let me know.
Thanks
Raju.

Hi
while i am executing the sales cycle creten Cash discount conditions are calculating in the Invoice directly not in sales order.
can you please let us know your views oin what basis iot calculating directly in the invoice, since payment terms is there in both sales order and invoice level. but discount is only appearing at invoice level, not in the sale order level..
Please check your Pricing Procedure, whetehr against your Cash Discount Condition Type, Requirement 24 or 23 is maintained? If it is maintained remove these requirements and save. Then try to run the transaction.
Regards,
Amitesh Anand

Hi, availability check at sales order level

hi,
sap gurus,
i know that availability check is optional at sales order level.
how to make it compulsary at this level.
any clues
plz help me on this.
my id is timmampalliatgamildotcom
regards,
balaji.t
09990019711.

Dear balaji
Go to VOV6, select your schedule line category and maintain tick for "Availability" which will make the end users mandatory for availability check.
In fact, for normal sales process, the schedule line category is CP in which the tick would be there.
thanks
G. Lakshmipathi

BOM changes reflecting in sales order BOM of delievery completed materials.

Hello gurus
i am explaining my requrement. My scenario is like this.
1.creating sales order
2.reating sales order BOM
Next production peole will create production order and will do confirmation of order and Goods reciept.
3. after this sales people will do delivery of the materail.
For example yesterday i have delivered one material X.
Today if i change the super BOM of the material X, these changes are reflecting in the sales order BOM of yesterday delivery done material X also. My client want to restrict thise changes. Pl help me how to resolve this ?
regards
srao

Hi Brahmankar
we checked for User exits we didnt find. Can u help me out on this regard.
Can we lock the sales order BOM ? means if we do any changes to super BOM assly level also, these should not reflect to sales order BOM . pl guide me
regards
srao

Credit check at sales order level?

Dear experts
I want to set credit check at sale order level with following conditions
consider open deliveries for credit exposure
consider billing documents for creadit exposure
do not consider any open orders
Also if oldest items are open for more than 7days then block the sale order creation
e.g suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-. In this case system should block the new sale order created of value more than Rs.50000/-
plz suggest the configuration steps
regards
kailash

dear friend
For i am already having the same setting but still my scenario is not working. i will explain my scenario again
suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-.
In this case system should block the new sale order created of value more than Rs.50000/-
But with the said settings purpose is not getting solved.
my settings are;
In OVA8 ;
Update: 000015
Static check: TICK
Status: TICK
open deliveries: TICK
Plz suggest
kailash

Credit check not reflecting in sales order level

Similar Messages

Maybe you are looking for