Profit center not derived in MIGO in traditional PCA

Dear All
I have a few basic questions in PCA
We are using SAP ECC 6.0 but new G/L is NOT activated
So in traditional PCA , i have mainatined all the configurations like Std hierarchy, Profit center hierarchy, basic settings etc.
While creating material, different PC is maintained for different plants.
Initially no settings were maintained in 3keh. At that time no PCA document is cretaed at the time of MIGO. However the PC is getting correctly populated in FI document.
I am confused that in case of balance sheet transactions like MIGo etc, is PC document created under traditional PCA based on material master ? settings for online transfer are active for the financial year.
Thanks in advance
Amit

Hi,
Yes. At the time of MIGO, the system picks up the profit center from the material master. Another way is to maintain default profit center in 3KEH against the inventory account. These are the two ways the system can find the profit center for the inventory account in MIGO.
Trust this helps much!
Cheers!

Similar Messages

Error - Balancing Line Item Profit Center not filled in Line Item 007

Hi
I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest.
Regards
Vaibhav

hi vaibhav
you go through this Tcode FAGL3KEH and maintain default profit centre. in the error message system shown GL accounts
hope you userstand
thanks
dharmendar

Lockbox- GLT2 201 "Balancing feild Profit center not filled"

Hello,
I am trying to configure lockbox with document splitting active. When Upload my file its posting to the Lockbox clrg account but errors out when I try to post to the GL account. GLT2 201 "Balancing feild Profit center not filled". Please let me know if I am missing something.
Regards
Siva

Step 1. SPRO-FS-GL Accounting- Business transactions-Doc Splitting-Edit Constants for Non Assigned processes - New Entries - Assignment of Profit Centers - Give your default/dummy profit center.
Step 2. SPRO-FS-GL Accounting- Business transactions-Doc Splitting- Extended Doc Splitting - Assign Document Split - Check the Std Acct Assignement - Record your Constant in the field.
Should resolve your issue.

Balancing field "Profit Center" not filled while doing F110

While posting document there is no error where as while clearing the document through F110 the error is shown as
"Balancing field Profit Center not filled " while doing F110.

Hi,
There could be various reasons why this error would come.
1. Check the settings for the new GL.
2. In particular,Check the configuration for classify GL accounts for document splitting and classify document type for document splitting.Also check config for zero balance clearing account.
3. Analyse the error on which line item the PC is not being filled.
Thanks
Aravind

Asset aquizition profit center not coming

Dear all
while asset booking profit center not coming (f-90)
regards
Purushottam

Hi Purushottam,
It is very simple. Just check your Field status setting for Asset acquisition GL, there cost center is suppressed. That is why it is not flowing.
In asset master Cost center is maintained and Asset acquisition GL being a balance sheet Gl we do not enter cost center at the time of entry, and if the cost center field is suppressed, the profit center mainatined in Cost center master data will not flow.
Just Check your setting in G067 recon account that is usually assigned to Asset GL's
Regrads,
SAPFICO

Profit center not updating with plant change

We have an issue with the profit center not updating with change in delivering plant.
A CSR entered a material on a sales order but the material is not extended to their location. They select a plant to deliver the material from. At this point the profit center fills in for that plant, from the material master.
The issue then is the material is not currently available at that plant so when the availability check is preformed the CSR checks for availability in another plant. They are able to find an available item at another location so they select that location.
When they save the sales order the plant reflects the new delivering plant, but the profit center still reflects the first selected plant. The profit center does not pull from the material master correctly.
Has anyone seen this issue before and developed a solution?

Hello Matthew
May be you have substitution defined in CO.
T codes 0KEM or 0KEL
See the following OSS notes:
167912 - Substitution call-up points for sales order/billing document
Hope this helps.

Profit center not in derived at the time of excise utilisation

Dear SAP guru
Need your help.....
We are implemented new GL functionality.
At the time of excise utilisation (T code - J2IUN ) - profit center field is not derived in standard SAP transaction because of that system showing error message - profit center mandatory for line item 0001.
Awaiting your reply.
Regards
Anjan

You have to assign profit centre to GL accounts companycode-wise & plant-wise probably using a user exit.

Dummy profit center determined when performing MIGO (after MB21)

Dear experts,
I have the following problem in SAP release 4.7:
Step 1) Perform MB21 (ok, no problem)
Step 2) Perform goods issue (MIGO): Sometimes it determines profit center from the material correctly while sometimes it determines dummy profit center!
The correct one is the profit center of the material master but no dummy. The account has a check in Profit. Segment in OKB9 setting.I have checked that dummy profit center is determined because the characteristic "plant" is not copied to COPA for derivation. Is it a system bug? Can anyone help?
Thanks!

Hi,
Good morning and greetings,
Maintain a substitution rule in the system through GGB1 / OBBH to ensure that the right profit centre is determined during the transaction.
By maintaining the substitution the system will automatically determine.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

WBS, Business Area and Profit Center not flowing in GR/IR Account

Hello Experts,
I have come across a very strange situation. I have two MIGO documents which are showing different posting characteristics:
1) FI Document 5000000553
In this document, the Business area and profit center is flowing in GR/IR Clearing Account (15660000) but WBS element is not flowing to this line item.
Screen shot is as follows:-
As you can see from the above screen shot that, for GR/IR Account 15660000. Only Business Area and Profit Center are flowing and WBS Element is not coming.
2. FI Document 5000015602
In this document, the WBS element is going in GR/IR Clearing Account (15660000) but Business area and profit center is not flowing to this line item
Screen Shot is as follows:-
From the above screen shot, Business Area and Profit Center are not flowing but WBS Element is coming.
Could you please let me know what could be the possible reason for this behavior of both the documents.?
Regards,
Amit

Hi Saurabh,
Its great to see your reply. Yes, I know that currencies and posting dates are different. But that's the way it is. One document is for fiscal year 2014 and other is for 2013. There is nothing related to currency and posting date which was causing the strange behavior of the system.
However, our team analyzed the issue and found that only for service material having a special valuation type related to services is causing the problem and still we are diagnosing the other possible root cause as well.
Thanks for your co-operation and suggestion.
Regards,
Amit

Profit center document created but profit center not updated in FI document

Hi Experts,
I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
We have separate table to identify the profit center by customer.
Please let know what could be the cause or reason for this kind of scenario
Thanks,
VK

Hi Krishna,
Though ur question seems very old, but now i got the same requirement as like you.
So if you remeber what needs to be done for this issue thats very good help to me.
My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?. if yes, plz tell me how to proceed.
Thanks
Madhan

Profit Center not updated in J1IEX & New GL is activated.

Hi All,
Good Morning to Every body
We have activated New GL concept making Profit Center mandatory. Thereafter, we have made a Import Purchase Order. The material for which import is being made is given the cost center in the master data. Then MIGO has been done. Accounting entry is picking up the Profit center filed automatically. Then MIRO is done and accounting entry is picking up the Profit Center filed automatically. When we do J1IEX " Post Excise Invoice" then system is not picking up the Profit Center Field automatically and is displaying an error while saving. System is saying" No profit center is updated for line item 001".
That means, system is not picking up the profit center from the material after MIGO into J1IEX while posting excise invocie.
Please some one help me as to how we should capture the Profit Center field automatcially or mannually so that Excise Invoice can be posted.
Thanks in advance. Useful answers will be awarded with points.
Thanks & Regards
Rishikesh

Hello Rishikesh,
Please use the "Capture and post" option in migo for exicse invoice if you are using New G/L with profit centre.
Regards

Profit Center not updated for mov type 511

When we are doing the goods receipt through transaction MIGO with mov
type 511 (Receipt of delivery without charge) as 2nd line item along with
mov. Type 101 as first line item, profit center document is not getting
updated for 2nd line item (GLPCA-MSL), but for 1st line item (mov type
101) profit center getting updated.
If we are doing the GR with movement type 511 alone, profit center
(GLPCA-MSL) updated correctly.

hi,
As per your error i might understand.
please check for second line item Item okay is marked or not.
if its 511 then please check whether Pricing control in MA-master whether its a Moving average or Standard price.
as you said for singular 511 profit center gettng updated then you can very well compare to GR's.
Regards,
Ninad Kshirsagar

Profit center not changedater

A material was having profit center A. Scheduling agreement was created against it and GR was done. While creating the invoice it was determined that the profit center for the material should have been B. So the GR was reversed and and the profit center was changed to B in the material master. Now when we are trying to post the GR again..it it still picking the wrong profit center- A. Why is this so? How can this be corrected?

Hi,
you have change your profit center in your material master
But it not get chnage in your PO for that line item ,it wont get chnage in Po for tha line item,
you have to create new line item in your Po then it will come correct in MIGo otherwise it will take old profit center in MIGO
Regards
kailas Ugale

Balance sheet items profit center not updated

In ECC 6- in 3KEI- we have given profit center derivation for balance sheet items through business area-
Though derivation rule is given it is not updating profit center at the time of posting to balance sheet items
it has worked perfectly in 4.7EE-
How to update profit center for balance sheet items in ECC6
Thanks in advance
joseph

Hi Joseph,
Please go through the link. It is cristol clear document for your requirement.
http://help.sap.com/bp_bblibrary/500/Documentation/J08_BPP_05_EN_KO.doc
Regards,
Satish Muvva.

Profit Center Not coming in Vendor Line Item in MIRO

Hi Experts,
We are facing one problem when we are posting miro in one plant profit center is coming in vendor line item in miro. But when we are posting miro with the same material code but with different plant same company code. But in miro vendor line item profit center is not coming.
What mistakes we have done in spro.
Kindly help me out.
Regards
GR

Hi
Normally vendor line item will not carry profit center, hence I think this is populated through some enhancements.
Hence you may need to analyze with the help of an Abaper.
Regards

Profit center not derived in MIGO in traditional PCA

Similar Messages

Maybe you are looking for