Proft centre error

hi
while goods inward im getting error 'profit centre xxx doesnt exist for 3.12.2007'
we maintained profit centre in material, but error showing with other prifit centre number  doesnt exis.
plz give me solution urgent,
advance thanks,
reddy

Hi,
Check whether you Created Profit center in (KE53{check priod here}, if not create in KE51 ) and assign it to material.
Also check in requrement class and requirement type .
If helpful then reward,
Regards,
Biju K

Similar Messages

  • Profit centre error

    hi
    when doing goods inward getting
    error: profit centrer xxx doesnt exist for 3.12.2007.
    we assigned prifit centre in material but showing  error with other proft center doesnt exist.
    plz give me solution urgent,
    advance thanks,
    reddy

    Hi
    The Profit center you are using may not be valid on that date.
    Check the Vlaidity period of the Profit center in KE53.
    If the date 03.12.2007 does not fall in the Validity period,Create the Profit center again in that Validity period including this date. in KE51
    Thanks & Regards
    Kishore

  • Profit centre error while vendor rebate settlement

    Hi
    this is regarding vendor rebate settlement TC- MEB4.
    while settlement of agreement, system is not able to determine the profit centre, hence unable to post the entries. in this regards, i have checked following:-
    1. material used in rebate agreement - profit centre maintained
    2. field status of all GL used in settlement process is optional for profit centre and cost centre
    3. in document splitting, categories of the GL's are Balance Sheet Item and Revenue
    4. field status of the posting key also open for profit centre
    5. document type is defined as Unspecified posting in splitting
    do i need to look some other place for possible cause of error? please revert
    Regards
    DD

    If you have mainatained the Rebate as accrual based on agreement adn Sales conditions then you should use Item Category as "01300-Cash Discount Clearing".
    Change and try in atest system and while changing the category read the warning message carefully that the system issues and understand the implications.

  • Profit centre error in J1INPR

    Dear All,
    When executing J1INPR during a particular period, I am getting the following error in the second screen.
    "Balancing field profit center for line item 001 is not filled"
    i have checked note 1063850.
    but there i am not able to trace out in which field i need to input the correct profit centre.
    As the prctr field is not recognized by sytem which is suggested in the note.
    Also if i try to populate in bseg-prctr the same is overwritten as soon as the cursor comes out of BTE mentioned in the note.
    Your help will be highly appreciated.
    thanks & Regards
    Ronak

    Dear,
    If you find it difficult to map profit centers through BTEs and substitution then do one thing,, use transation FAGL3KEH and enter the profit center for the TDS provision account and at the month end you can allocate this amount to diffrent profit centers thorugh distribution etc.....demonstrate this process to your business users and take the decision you like....
    REgards,
    Chintan Joshi

  • Profit Centre Error in VA01

    Hi Friends,  i am facing problem with profit centre when i am creating sales order through VA01.  Generally, as u know, it should pick profit centre from substitution or from material master . but it was not doing that instead it is picking some profit centre. i  am not able to understand from where it was picking that profit centre. 
           if any body have an idea from where VA01 will pick profit centre,pls let me know.   i am giving following  initial inputs.
        order type          Z1FD
        sales org            LCSO
       distribution chnl    DI
       division                01
        sales office          10
    sales group             10E

    Hello all,
    I have exactly the same problem. I have implemented new general ledger and controlling with PCA and the inheritance of profit centre has been established by segment.
    When I try to acquire an asset using the transaction F-90, the system deliver the same error.
    I can not understand the problem, because with other operations the system works properly, but in this case the system do not bring the cost centre from the asset.
    I have tested all things from this forum and nothing fix the problem.
    Could you help me with this??
    Thanks in advance.

  • Cost Centre Error

    Hi All,
    Can anyone help me the possibilities for the error given below:
    "Error: Cost Centre is blocked against revenue postings on 30.04.2007"
    Pls reply asap.
    Vinay

    Hi
    Normally cost centers are used for capturing and analysing costs incurred on a particular cost center or group of cost centers
    So generally only the costs are posted on costs centers and revenues are not allowed to be posted
    This control is there on the cost center master data in Control Tab
    If you want to post the revenues also to cost center remove tick on Actual Revenues and post entry.
    But even in that case you can only post revenues on cost center as a statistical posting. So u need to give a real CO object for capturing revenues for eg. COPA Segment etc.
    Hope this clears your error
    Regards
    Ram

  • Funds centre error

    Hi experts,
    While creating PR through ME51n, the error displaying "No posting object defined for HPL /  / HPL_FUND / RM_NAPHTHA"
    Could some one suggest me where I need to activate it.

    Hi
    Go to FM9k  enter the FM Area, Fiscal Year, enter the Fund, FCTR and CI
    press enter, activate the check box in the next screen as per your requirement.
    Bdg, CMA PMA & PST
    Hope this would resolve your issue.
    regards
    Chandrasekaran

  • CRM Interaction Centre - Error when display an attachment

    Hi All,
    I'm getting this error when I try to display the attachment in CRM.
    "No document display because of missing Customizing for HTTP service '/default_host/sap/bc/contentserver' -> See SAP Note 606745"
    We have activated the contentserver in transaction SICF. I can attach a document but cannot display...I can attach .doc and pdf files.
    Is there any missing settings to display that attachment?
    thanks,
    Ken

    Hi Ken,
    Follow the guidelines of the note-606745 to resolve ur issue, we had the same problem.
    Regards,
    Kumar

  • Profit centre

    Hi SAP Experts,
    I have activated document splitting and done the relevant config.under different nodes. But when i am doing transactions profit centre is not getting updated in the second line item.
    Its behaving like without document splitting manner. But when I am doing MIGO profit centre error is coming.
    What could be the reason.. pls provide me solution.
    Thanks and regards,
    padmaja

    Hi Padmaja,
    Hope ur seing the document in the General Ledger View. The splitting effect will be only seen there.
    regards,
    Kiran

  • Profit centre report drill down total

    Hi
    I am executing S_ALR_87009722 proft centre report from period 0 to 1. The balance of a bank account is  76,729.18.
    When I drill down to actual line items it's showing the break-ups amounting to 3,320.17; which is only the break up for period 1. Shouldn't this show the break-up of the balance as at the report date?
    We need to see the break-up for 76,729.18 (Balance as at end of period 1).
    The Profit centre currency is different to company code currency and the transaction currency.
    Any assistance is appreciated.
    Thanks & Rgds
    Nadini

    Some things you might to check:
    Actuals/ Plan values?
    Same version?
    Has somebody changed report recently?
    Have you run line item transactions individually and compared?

  • HP Solution Center error "flash9b.ocx failed to register"

    I have a similar Flash9b.ocx faied to register problem that I have been trying to solve for several weeks.It started after I upgraded to the latest Flash Player 10.3.183.7 via the official Adobe website. After this upgrade on start up I got the following HP Solution Centre (printer software) error message:
    C:\Windows:\system32\Macromed\Flash\Flash9b.ocx failed to register. HRESULT-2147220473. Contact your support personnel.
    Further investigation confirmed that Flash Player had stopped working and where the image should be there was a blank black box. I tried reinstalling the latest version of Flash Player again but it made no difference. I was prompted to insert the original Solution Centre disk to solve the problem and although I tried this, it had no effect. I uninstalled Solution Centre including manually deleting any HP files that had been left behind and did a complete reinstall of the latest version including relevant patches from the HP website. This appears to have solved the problem as far as the Solution Centre error messages are concerned. However, on further investigation I found the Flash9b.ocx file mentioned above no longer exists but Flash Player still isn’t working.
    I am running Vista (32bit) with all the current upgrades and Internet Explorer version 9.0.8112.16421 update version 9.0.2 (KB2559049)
    Thanks for your help

    After more than two weeks of trying, I finally found a solution to my HP Solution Centre Flash Player 10 conflict. Below is what worked for me and if you have a similar problem I hope this posting is of some use. uninstall Solution Centre & reinstall the latest version plus all the relevant patches from the HP website. Reset browser settings which in my case was IE 9 (Internet Options, Advanced tab, Reset) followed by a restart. Then uninstall Flash Player (Control Panel, Programs & Features, Uninstall) followed by another restart. Finally go to Adobe website and download the latest version of Flash Player.
    Hope this helps

  • Getting error on Cost_Allocation under the assignment window

    Dear
    we are on 11.5.10, we have configured costing segment, so that we can transfer payroll data into GL modue. but when i validate record, it's show error as mentioned below.
    An error on the derived cost allocation keyflex xxx.xxx.xxxx.xxx.xxxx prevents it from being displayed. The details of the error are:
    Error Segment: Profit Centre
    Error Message: ID HRD for the flexfield segment Profit Centre does not exist in the value set PROFIT_CENTRE.

    did u try with the below error message
    ID HRD for the flexfield segment Profit Centre does not exist in the value set PROFIT_CENTRE.
    checking value set which is is referring

  • Report experience

    Hi, xperts
    I really got good knowledge from SDN .
    I am very thank full to all guys, who believe to share our though and to help.
    Creating report on infoset,
    Selection screen having fields
    1 – Vendor (range)
    2 – Company code
    3 – Profit Center (range)
    4 – Posting date (range)
    Want output field.
    1-     Opening balance.
    2-      Period balance in 0-30, 30-60, 60-90, 90-365 (days total 4 column) .
    3-     Vendor
    Opening balance column --- need balance amount (I have) of vendor, till the previous date of postig date(low value) in variable.
    Period balance—
    This should come according to given posting date for report.

    Examples you can use
    Variable of key date
    CKF1 total balance 0-30 open = RKF1 balance 0-30 open + RKF2 balance 0-30 cleared
    RKF1 item status = 0 posting date <= key date 0deb_cre_amt_lc. due date between key date and key date +30 (in the variable offset)
    RKF2 cleared date > key date, 0deb_cre_amt_lc, due date between key date and key date +30 (in the variable offset) posting date <= key date
    Then repeat for the rest of the aging but change the variable offsets (you end up with quite a few CKFs and RKFs)
    Take some time to go through the above example to really understand what is going on - then it will become clear what is happening
    BTW - I don;t think you are going to see profit centres - as the AR4 shouldn;t contain the proft centre as that is a revenue.cost posting (ie the opposite side of the FI jnl)
    ie one AP posting can have multiple profit centres on them
    And what are you going to do about partially allocated/referenced items? ie credit notes or accounting journals
    Not a good idea to have a posting date range
    What I would do with this is to split it up into two queries - one an aged creditor and the other a Vendor turnover by profit centre

  • BOE and document splitting

    Hi,
    We have document splitting activated in our ecc 6 system.  I am trying out Bill of exchange.  While posting f-36,  I am crediting collection charges too.  when simulating,  the debtor acct for collection charges is not picking up profit centre, and i am landing up in profit centre error.  following is the entry:
    DR        s debtors (BOE)  10000  (automatic profit centre thru system)
    Cr        discount charges      100 (profit centre given manually after simulation)
    DR        s debtors (normal)    100 ( no profit centre)
    CR       s debtors (normal) 10000  (automatic profiit centre thru system)
    Error message - balancing field profit centre in line item 3 not filled.
    Please help
    Regards,
    Sadhana

    Hi,
    Check whether note 1249888 is useful for this.
    Regards

  • About cji3 layout

    dear all:
                In  report CJI3, there is no option of the  "profit center"  in the column set, how to add it?
                Thank you!

    The dynamic selection will only restrict the slection of project object based on provided profti centre in input.
    I fill that you wanted to sort CJI3 after executing report based on profit center. As the profit center is not available in Cji3 change layout, You can add the same using COOMEP01 (Function Module EXIT_SAPLKAEP_001: Line Item Reports in Actual: Customer-Specific Fields).
    Based on which object type i.e WBS, NWA Production order , you wanted to disaply profit center you have to provide to your ABAPer.
    I have used this approch. If you serach for relvent note, you will get this userexit.
    With Regards
    Nitin P.

Maybe you are looking for