Program SWNC_CONFIG_TIMEPROFILE exist in ECC6 but not in ECC5

Hi all experts,
I wonder why program SWNC_CONFIG_TIMEPROFILE does not exist in ECC5 but it is in ECC6.....
Is there any other way If I wanted to change the time profile in ST03n (ECC5)???
Thanks in advance.
BR,
Nancy Tan

Hi Nancy,
You're right Program SWNC_CONFIG_TIMEPROFILE only avaible for ECC6 release.
If you tend to generate time profile in hourly in ECC5, you need to apply orretion in sap note:
Note 17750 - Workload: Time profile also for night hours
BR,
Terry Tow

Similar Messages

Java chat program, works on single PC, but not over internet?

I got bored so I started writing a chat client in java, its IRC style, a server and as many clients as you want. It works fine on a single computer (using 127.0.0.1 as the IP) but not over the internet.
I've tried running the server and client on my home PC, set up the ports to be forwarded on my router and enabled them in the windows firewall but I get the error "Connection refused" when trying to connect using my external IP (ISP) address, same with me running the server and a mate running the client.
The class chatHandler was basically stolen off the internet, the rest I wrote myself or modified bits of code to suit. I wrote it in netbeans with the GUI builder.
I've hosted both projects in the single zip, if you want to run the application just open the .jar file in the dist folders, or view the source via the src folder, or alternatively you can load the project up in NetBeans so its easier to play with the GUI.
So yeah if anyone can help me out with why its not working that'd be great, I've added the port to my firewall (default 60111). My ultimate goal is to implement an actual protocol so it isn't just sending plain text, then I can easily send files to mates etc.
http://rapidshare.com/files/208309140/ChatProgram.zip.html
Edited by: rolls on Mar 12, 2009 4:58 AM

what I have done recently is this:
have added java.exe, javaw.exe, the ports Im using to the windows firewall and also the ports I am using to my router.
I have also tried changing :
server = new ServerSocket(port);
to:
InetAddress IP = InetAddress.getByName(IPAddress);
server = new ServerSocket(port, backlog, IP);
(IPAddress = 192.168.1.3 my lan NIC)
As I believe it was binding to my local loopback adaptor, hence not seeing any packets when using a packet analyser, however now I get an exception, after printing a stacktrace from the client I get this.
However I can now connect using 192.168.1.3 just not using my external IP address.
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl .java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSoc ketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.j ava:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.j ava:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at java.net.Socket.<init>(Socket.java:366)
at java.net.Socket.<init>(Socket.java:180)
at chatclient.Client.run(Client.java:60)
at java.lang.Thread.run(Thread.java:619)
Why is my connection getting refused? I've set up a virtual server and port forwarding on my router, and turned off the windows firewall.

Why do some Apps(programs) appear in my dock, but not in my launch pad?

I recently downloaded Open Office and Adobe Photo Shop 12 . Photo shop appears in both my dock and launch pad. However Appace Open Office just appears in my dock, but not my launch pad, and also the open office little disk or cd reader icon (white 3d rectangle with image of black slot in front) appears on the right side of my screen. I can't eject it because I get a popup that says it is being used by "Open Office" and I have to quit the application to eject it. My question is if I quit the application using "Command" Q and then eject "Open Office" will I loose open office and have to downlad it again?
I think I answere my question.
I clicked on the Open Office Icon in my dock, had it go to "Finder" then ejected the "Open Office" disck reader icon and it went away from my screen.
I then went to "Finder" and opened it up and Lo and Behold "Open Office" disappeared from there too. Boy that sure is crappy.
So I downloaded it again.
Is there anyway to clean up the desktop so I don't have those silly images hanging around?

There have always, well for the past few years, written installers that just create a mess. All installed applications should appear in Finder, Applications. Not all of those will appear in Launchpad. When you encounter one that does not appear in the correct way, all you can do is manually move things around so it is consistent with the way apps should work.

WD ABAP Application exists in SE80 but not in SICF

Hi,
how could I make my WebDynpro ABAP applications available in the services list of SICF?
My problem is, that the WD applications from the WebDynpro Component "FITV_FPM_START" (e.g. FITE_EXPENSES), which I need for my ESS in portal, appear in my ABAP Workbench but not as services in SICF.
Anyone knows what could be the reason?
Thanks for your help in advance.
Best regards
Joachim

Also check related note Note 1088717 - Active services for Web Dynpro ABAP in transaction SICF.
Regards

Objects Exist in Prod but not in Dev - how to Delete?

Hi All,
I have recently taken over a system and I am doing some clean up of process chains which are failing and not needed anymore.
I have noticed that there are objects like DTP and Transformation in Production for an Infocube in-active in production that have a different technical name in the Development environment.
When I activate the objects in Dev and transport them through it does not work as presumably the objects have different technical names, my transport seems to do nothing.
I am now looking at deleting the objects from production and then transporting through new Active DTP and Transformation so that both systems are in Sync but because the objects are in prod and not in Dev I cannot delete them with a trasnport.
Same with my Process chain it is in production and I want to delete it but when I delete it in Dev and transport through to prod it does not delete.
Help please

Hi,
For deleting DTP :
Execute the RSBKDTPDELETE report. As of NW 7.0 Support Package 08, this report exists in your system, before this, you must use Transaction SE38 to create it and copy the program text from the correction instructions. The report requests the ID of the DTP that is to be deleted.
Caution: You should execute the report only if you cannot delete a DTP using the normal procedure. The report does not check whether the DTP may be deleted, for example if this DTP has already been used to load delta requests and if a deletion would invalidate the delta administration.
For deleting ProcessChain :
For deleting process chain, we will have access in the system. If not, tey to transport the chain again.
Deleting process chain is not an issue i guess.
Hope this helps.
Thanks and Regards,
Srinath.

Firefox won't open external links (from other programs), says its already running but not responding.

I'm having this problem, everytime i click a link on other program, like the program's link on the about tab, or a youtube link on Live Messenger, it won't open, a dialog pops up saying firefox is already running and not responding, but it is there, and working.
If it matters, i have the "beta" tab preview enabled on the windows 7 toolbar.

You're welcome

Program runs on Win 7 but not 8.1

I've raised this issue twice in the last 2 - 3 weeks without a solution. I'm developing a desktop application using VS 2013, MFC & native C/C++. I can build a simple skeleton program with just the xxxApp, MainFrame and ChildView that runs just
fine on W7 & 8.1. This is an X86 application using the Static MFC library.
But when I build the application, it will not run on W 8.1 though it runs just fine on W7. I've run Code Analysis and fixed all reported problems. The application will not even start on W 8.1.
I need help or guidance.
Bobn
Bob Nichols

This problem is still not solved.
When running on WIN 7 under VS2013 debugger, I see an Access Violation Error "First-chance exception at 0x00C11638
in BmateSatCMMS.exe: 0xC0000005: Access violation reading location 0xBAADF079" I CMainFrame when (if (!m_wndView.Create ... os executed. When running on WIN 8.2, only the Windows Explored flashes when starting the program.
Bob Nichols
Bob Nichols
How about if you add some crash dump code in your app to know the exact reason of your issue and then use some dump utility for example windlg etc to analyze it.
Thanks
Rupesh Shukla

Reason & Goal in BT116H_SRVO, exist in gui but not available field in UI

7.0 from 5.0 upgrade
In the gui when viewing a service order fields
Reason - CRMT_7300_SRV_SUBJECT_UI - LISTCODE &
Goal - CRMT_7120_ACTIVITY_UI - OBJECTIVE
are header fields but in using the UI configurator I can not find these fields in any of the folders of the avialable fields
i.e. BTADMINH, BTREFOBJMAIN, BLOCKS, etc...
Because we used these fields in 5.0 and need to make them visible in the UI. Plus the Reason code we are using Category Modeler behind it. Even in 7.0 we see all the values in the gui.
Would appreciate it if someone could point us in the proper direction, I am more functional than technical but trying to see how to add these to the view in BSP_WD_CMPWB. I don't think they should be new fields but I woudl appreciate any help.
Will give points.

Hello Manfred,
    I set up the SERVICEPRO role, and in the IMG I set SPRO > CRM > Basic Functions > Catalogs, Codes, Profiles > Assign Status Profile and subject profile to a Business Transaction Type (you are right, this step does not exist in 5.0) to where my transaction type, status and subject profile now exist.
   In the UI configuration in the service order I did already see the CategoryDDLB but the choices are category1, category 2, category3 .. (up to 10 available) I can't see the categorization for the reason codes.
   If I go to the IC agent role and use the Nav Button for Interaction Record, choose Categorization I can see Reason code categories in this view but they show as CatDDLB (instead of CategoryDDLB)
In 5.0 in the IMG transaction type, assignment of the transaction categories.
in the BUS2000116 Service - you could assign the subject that did categorization (up to 4 levels)
in the BUS2000126 Business Activity - you could assign the Subject Profile that did the categorization of the Reason Code.
This config carried to our 7.0 system.
CategoryDDLB looks to map to BUS2000116 service
CatDDLB looks to map to BUS2000126 business activity
Our Interaction Record and our Service Order is the same document type. So in the IC Agent role I can create an interaction document #101 put the reason categorization CatDDLB entry AND then click Service Order which is still showing me document #101 and enter the CategoryDDLB entries.
The data looks fine in the gui when I open #101. I think this tells me the Genil / BOL should be ok (?) but how to get
CatDDLB & CategoryDDLB in the same view or view set.
Edited by: Glenn Michaels on Sep 11, 2009 8:39 PM

Program working in virtual device, but not on physical device

I made a program, pretty simple, actually, that simply consumes a web service here on my local network. Pretty much all it does is try to authenticate.
I had a problem with DNS before with the androids, so i replaced all of the domain names in the service xml files to IP addresses, which still works virtually, but again, not on the physical device.
Any ideas?

Hello,
Regarding the procmon capture;
Yes, it is a lot of data. I would just start at the top and read my way down on both captures and then identify areas which they differ. Without understanding where the two captures differ, well - it would seem hard to understand where the difference in
behaviour starts?
Of course you can minimize the data by (this seems rather obvious, but lets re-iterate);
1. Avoid all and any unnecessary background tasks
2. Monitor normal system activity and exclude that
3. Learn the application behavior and decide if you want to monitor only the application, or all system activity
4. Understand the application
As you have a working / non-working scenario - this seems like a perfect scenario of using ProcMon.
Nicke Källén | The Knack| Twitter:
@Znackattack

Program is downloaded to CC but not to computer

Hi, My InDesign, Photoshop, and Illustrator Programs are downloaded to my Creative Cloud App, but they are not downloaded to my computer. I tried to redownload them from the internet but nothing happens. What should I do?
Thanks

See if this Adobe document helps:
http://helpx.adobe.com/creative-suite/kb/download-install-trials.html?t2

Why does a program run in one account but not another?

I am trying to run Prism (from graphpad) on my macbook pro. The application is hosted on a server accessed using an adress beginning with smb:// . I have copied the application shortcut to the dock and am able to run it absolutely fine on one user account. In my other user account, the program starts and goes through an initialization screen, then freezes (colourwheel when the mouse is over the menu bar). This application has run fine for the last 18 months, and has only now developed a problem. I have spoken with our institute's IT professionals, and they have suggested some things, but none have worked. My network connection is stable and, as far as I can, I have repaired all permissions.
Any ideas? I really, really don't want to have to flip between accounts to use this somewhat essential graphing program!
Thanks in advance!

again,
"start debugging by using the following in both functions:
trace(this); // to check if you're still within scope of your class in both."
Ambari wrote:
public function geoPieceBegin (e:MouseEvent): void {
            this.startDrag();
            this.addEventListener(MouseEvent.MOUSE_MOVE, geoPieceMove);
            this.addEventListener(MouseEvent.MOUSE_UP, geoPieceEnd);
            PuzzleGlobals.pieceActive = true;
            MovieClip(root).nameDisplay.text = this.fullName;
            if (PuzzleGlobals.currentLevel == "Name") {
                MovieClip(this).nameOfState.textColor = 0xFFFCCE;
            trace (this); //traces [Object myGeoPieceObject]. this is helpful
            MovieClip(root)["bmc"+PuzzleGlobals.puzzleAbbrev].addChild(this); //works just fine
public function geoPieceEnd (e:MouseEvent): void {
            //removing extraneous code
trace(this);
            MovieClip(root).nameDisplay.text = PuzzleGlobals.currentPuzzle; //works just fine
            this.stopDrag();
            if (this.dropTarget.parent is GeoPuzzle) {
                if (GeoPuzzle(this.dropTarget.parent).abbrev == this.abbrev) {
                    //removing extraneous code
                    MovieClip(root)["bmc"+PuzzleGlobals.puzzleAbbrev].removeChild(e.targe t); //removes object

Program will run with errors, but not at all in a .jar file

First off, here is my program right now:
import java.io.*;
import java.util.*;
import javax.swing.JOptionPane;
public class prune
    public static void main(String args[])
        String steamid="",time="";
        BufferedReader infile = null;
        BufferedWriter outfile = null;
        FileReader fr = null;
        FileWriter wr = null;
        StringTokenizer strtk = null;
        String line = null;
     JOptionPane.showMessageDialog
      (null, "Vault.ini Pruner v2");
     String filepath = JOptionPane.showInputDialog("Enter the filepath to your vault.ini file.");
     String strdeletenumber = JOptionPane.showInputDialog("Enter the number that vault entries under will be deleted");
     int deletenumber = Integer.parseInt(strdeletenumber);
        try
            infile = new BufferedReader(new FileReader(filepath));
            outfile = new BufferedWriter(new FileWriter(filepath));
        catch(IOException ioe)
            JOptionPane.showMessageDialog
      (null, "Can't open vault.ini:" + ioe);
        try
            while((line=infile.readLine())!=null)
                strtk = new StringTokenizer(line);
                steamid = strtk.nextToken();
                time = strtk.nextToken();
                if(Integer.parseInt(time)>=deletenumber)
                    outfile.write(steamid);
                    outfile.write(" ");
                    outfile.write(time);
                    outfile.newLine();
        catch(IOException ioe)
            JOptionPane.showMessageDialog
      (null, "Error:" + ioe);
        try
            outfile.close();
            infile.close();
        catch(IOException ioe)
           JOptionPane.showMessageDialog
      (null, "Error:" + ioe);
            System.exit(0);
}The program is supposed to open a vault.ini file and delete entries with a number lower than specified.
Vault files are set up like this:
STEAMID:X:XXXX 100000
Right now if I run the program through command prompt it erases both the vault.ini and new vault.ini. I am also trying to put it in an executable jar file and when I do that I get a "Failed to load main class manifest attribute" error. Any ideas on what is causing this?

I don't know what is happening. I put your exact code into a small build environment and used a build file for ant that I have and it works just fine. Manifest files are a total pain which is why I use a tool to generate it. I know that the last line has to be blank and that no line can be over a certain length.
You've now spent several days avoiding ant and I got it running with ant in about 3 minutes. I'm really missing something.
For reference, the build file is below should you change your mind. Put your prune.java in a new directory named "src" and save this file below as build.xml in the parent directory of "src". Run the program with java -jar lib/prune.jar
<project name="jartest" default="main" basedir=".">

    <property name="src.dir" location="src" />
    <property name="dest.classes.dir" location="classes" />
    <property name="dest.lib.dir" location="lib" />

    <property name="dest.lib.name" value="prune.jar" />
    <property name="main.class" value="prune" />

    <property name="compile.debug" value="true" />
    <property name="compile.optimize" value="false" />
    <property name="compile.deprecation" value="true" />
    <property name="compile.source" value="1.4"/>
    <property name="compile.target" value="1.4"/>

    <target name="main" depends="compile,jar" />
    <target name="compile">
        <mkdir dir="${dest.classes.dir}"/>
        <mkdir dir="${dest.lib.dir}"/>
        <javac srcdir="${src.dir}"
                     destdir="${dest.classes.dir}"
                     debug="${compile.debug}"
                     deprecation="${compile.deprecation}"
                     optimize="${compile.optimize}"
                     source="${compile.source}"
                     target="${compile.target}" >
        </javac>
    </target>

    <target name="clean">
        <delete dir="${dest.classes.dir}"/>
        <delete dir="${dest.lib.dir}"/>
    </target>

    <target name="jar" depends="compile">
        <jar destfile="${dest.lib.dir}/${dest.lib.name}"
                basedir="${dest.classes.dir}">
            <manifest>
                <attribute name="Built-By" value="${user.name}"/>
                <attribute name="Main-Class" value="${main.class}" />
            </manifest>
        </jar>
    </target>
</project>

User Exit that will allow the SAP program to create DN, but not create IDO

Hi all,
The requirement is when we select 1 PO in VL10g transaction and click the u201CBackgroundu201D button, the user exit will allow the SAP program to create Delivery Number, but not create IDOC for the Delivery Number to send it to warehouse system. Also the created Delivery Number must be in changeable mode in ECC system .I need to find any exit to make the DN table field LIKP-VLSTK not to be u201CBu201D (distributed). The B will make DN not changeable in ECC system which is hard coded value in standard program. so the DN should be changeable.
Please suggest me the User Exit name which serves my purpose.
Thanks in advance
Latha.

Welcome to SCN!
Here is some code that will allow you to find exits and BADIS on your own:
[Code To Find BAdi|https://wiki.sdn.sap.com/wiki/display/ABAP/CodeToFind+BAdi]
Rob

Keep Program Active But Not on the Dock

I know that Skype is not an Apple program, but it, and other items (sometimes an Apple product) will become inactive when removed from the Dock. Can Skype, or other programs, remain active but not stay on the Dock, so that the visible (and active) icons that remain on a Dock are more manageable in their overall length?

hi,
today itself i faced the problem like this.
and my solution is .
i forgot to transport 1 previous request from quality to production.
thats shy my program running coorectly on quality but not on production and it is showing previous version as a active version.
just check for this scenario, or else retransport all request in a sequence. and then check it

Program active, but not active?

Hello fellow ABAPers,
we have some very weird behaviour in our productive system: transports from Q/D are imported fine, the affected programs are shown as being active in SE80, but when starting the program the old version is started. Only after I run SGEN the new version is used.
I haven't found any notes on a behaviour like this, has anyone ever encountered similar problems?
Thx in advance for any advice!
Bjoern
Edited by: Bjoern Ischo on Apr 28, 2009 11:24 AM

hi,
today itself i faced the problem like this.
and my solution is .
i forgot to transport 1 previous request from quality to production.
thats shy my program running coorectly on quality but not on production and it is showing previous version as a active version.
just check for this scenario, or else retransport all request in a sequence. and then check it

Program SWNC_CONFIG_TIMEPROFILE exist in ECC6 but not in ECC5

Similar Messages

Maybe you are looking for