Programatically Selecting Tab

Hi,
I want to select a tab programatically on click of button. I set the showDetailItem disclosed property programmatically on click of the button and it works fine. Now if user selects some tab and then they click on this button then the programatically tab selection is not working. For this ViewController project 'Enable User Customizations -> For Duration of Session' is set. If I remove this then the programatic tab selection works fine always.
So when User Customization is enabled then it takes precedence and programmatic selection is not working. Is it the expected behaviour? And is there any way only on this scenario to take programmatic selection takes precedence?
Thiru

http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm
Check the second and third examples.

Similar Messages

Programatically selecting tabs

Hi,
I have a tab set set with 3 tabs and 1 table component inside each of the tabs.
I need to navegate between them. For that, there are hyperlinks inside the
tables, the user clicks on the hyperlynk and an other tab shoud get displayed. The way I pictured is, adding a action listener on the hyperlink and using the tabSet.setSelected("tab2") method. But it doesn't seem to work. Is this the correct approach ?

Hello Tiago,
Yes, you seem to be heading down the right direction. You should be doing something like this:
((TabSet) parent).setSelected(newSelection);
If this does not help, send me set code block and I will take a look at it?
Regards,
CreatorTeam

Is it possible to programatically add tab pages on tab control

Hi All,
Is it possible to programatically add tab pages on tab control? If yes then how?
Thanks & Regards,
Shrinivas

Doing this will require the use of VI server and methods and properties. First, some questions:
Is the number of pages you may need unbounded?
Do you have a maximum number of pages you need to display at any one time?
If the answers are no and yes, then you can create a tab control with the maximum number of pages you need, and hide or show the pages, as necessary. To hide or show pages, use the Pages property to get references to all the pages. Use Index Array to select the page you want to show/hide, then use its Page Visible property to show and hide it.
You can also get a lot more dynamic, if you number of pages you need to show at any one time is less than the total number of pages. In this case, you will want dynamic page contents and tab name. You can set the tab name by Page Label property of the page (right next to the Page Visible property). You can make the content dynamic by using a subpanel as the only contents of the page. You can find out about subpanels in the LabVIEW help or this post.
You also need to ask yourself whether a tab interface is the best one for your application. I have usually found that if I need to show and hide a lot of tabs, I would be better off with a subpanel for my content and a text or menu ring the select the content. Tree controls also work nicely for selection.
Good luck! Let us know if you need more help.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Javascript to put text of selected tab in a header element at top of page

Create a simple html document a header and main div's.   tab menu, say three tabs, in the main div. Want the header to display the text of the selected tab.
Here is the example with default SpryTabbedPanels.js and SpryTabbedPanels.css.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="header">Content for id "header" Goes Here :Want this to be the text of the selected tab.</div>
<div id="main">
<div id="TabbedPanels1" class="TabbedPanels">
    <ul class="TabbedPanelsTabGroup">
      <li class="TabbedPanelsTab" tabindex="0">Tab 1 text</li>
      <li class="TabbedPanelsTab" tabindex="0">Tab 2 text</li>
      <li class="TabbedPanelsTab" tabindex="0">Tab 3 text<br />
      </li>
    </ul>
    <div class="TabbedPanelsContentGroup">
      <div class="TabbedPanelsContent">Content 1</div>
      <div class="TabbedPanelsContent">Content 2</div>
      <div class="TabbedPanelsContent">Content 3</div>
    </div>
</div>
main content
</div>
<script type="text/javascript">

</script>
</body>
</html>
Anyone have a javascript for this?

Just to clarify:

Data Selection tab in infopackage

Hi Gurus
Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage?
I know the setting required on R3 side for that but not sure why we use the data selection.
Can we use this data selection for master data as well?

Hi Kris,
Data Selection tab allows you to select: date ranges, document numbers and the like.
In order to have filds in there, you should first select in the DataSource in the R/3 side wich field could be selected.
If it is a Generic DataSource, you can do it running RSO2 transaction code.
<text removed by moderator>
Claudio
Message was edited by: Matthew Billingham

Not able to put data selection condition in data selection tab of infopakag

I was loading data from data source as data mart ( export data sauce from ODS) to other ODS.
when I tried to do delta Initialization with data transfer , I am not able to put data selection condition in data selection tab of infopakage.
when I choose Full Update in Update tab . It enables data selection fields in data selection tab. and I could put the condition.
I have checked in transfer structure as well , the fields are marked for selection.
Please advice .
Please tell me what could be the reason for this problem

Ashutosh,
As you are doing delta upload the data selection tab will be disabled, if you want to do the selective load then you need to do init update with your selection.
When you do the full updtae then definitely the data selection tab will be enabled for all the objects.
Hope this helps...
*******Assign Points if it helps********
Thanks,
Gattu

Unable to change date selections in data selection tab

Hi experts,
I'm new here, i scheduled the init load with date selections in the data selection tab, i successfully loaded the data and now i want to go for the delta but i'm unable to delete the date selection in the data selection tab. what problem is this.
can we load the data with the same selections in delta update ? how can we delete the date selections
orelse nothing happens even if there is a selection in the data selection tab? the date is a past one.
help me out plz
regards

delta loads copy the selections from the init load.
Often while scheduling delta loads u will see a message 'selections copied from the last init load'.
cheers,
Vishvesh
Message was edited by: Vishvesh

Adding a field in data selection tab of Info Package

Hello,
how can I add a field for selection in the data selection tab of the info-package in BW 3.5.
Thanks,
SD

Hi,
You need check Selection in RSO2 in ECC then that field is available for Selectgion in InfoPackage.
Here I'm giving 0CUST_SALES_ATTR DataSource Example for Selection Change, so see the logic and accordingly you can change your DataSource Selections.
See the properties of that field in RSA2 in ECC and you can also make it for selection, use the following program and see it.
In ROOSFIELD table give the datasource 0CUST_SALES_ATTR and see , select only Active version Fields.
For the following fields you can find FIELD = X, it indecates that it is abailable for selections, so in this way you try to do it by using following program and check.
KUNNR
SPART
VKORG
VTWEG
REPORT ZBI_ROOSFIELD NO STANDARD PAGE HEADING .
tables ROOSFIELD.
Update ROOSFIELD set SELECTION = 'X' where
OLTPSOURCE = '0CUST_SALES_ATTR' and
FIELD = 'FAKSD '.
Also see SAP Note : 1033847
Re: Field Selection in Datasource 0CUST_SALES_ATTR
Thanks
Reddy

Problem in data selection tab in infopack

Hi,
I created one text datasource ZACCOUNT_GRP_TEXT based on infoset.
in r/3 , SPRAS is selected as a selection field .
but wen i created the infopak for this , in data selection tab its not giving me the option of sparas selection dats coming blank .
plz let me know the reason why data selection tab is blank and how i can correct it.
thnx

hi,
go to extract structure and see whether the selection coulmn is checked for this field.
if not check then check and save it.
now go to rsa3 and see wheter the field is coming in selection.
if yes then replicate the datasourcee to the bw.
now create the infopackage u get the field in IP.

Routine in data selection tab

hi friends,
i need to write routine in data selection tab , i need like when ever i open need to show current data.
how can i write coding.
i have code like this, please correct my code
L_t_RANGE_IOBJNM = '0CALDAY'.
L_t_RANGE-FIELD NAME = 'CALDAY'.
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'EQ'.
L_t_RANGE-LOW = sy-datum .
I DIDNT UNDERSTAND HERE WHAT IS ACTUALLY IOBJNM WHAT DO U MEAN BY LOW AND HIGH ACTUALLY. FIELD NAME MEANS I NEED TO MENTION LIKE/BIC/ZMNO LIKE .
THANKING U,
SUNEEL.

Check below link to understand the RANGE type objects in ABAP. The OBJNAM is the object name which is used for selection in the InfoPackage. l_t_range is the internal table which contains all the selections used in the InfoPackage. So, if you need dynamic selections you have to code to populate dynamic values for the corresponding InfoObject in this Internal table. Low/High are the fields which actually contains the "From" and "to" range in selection.
Option - <,>,=, <> etc.
Sign -Include/Exclude (I/E)
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/content.htm
Regards,
Sree

Hierarchy selection tab missing in infopackage

Hi Experts,
i am looking how to load multiple hierarchies to Bi so inorder to know available hierarchies from OLTP in hierarchy selection tab in infopackage which was not available at all. i had only data selection tab.i am using version Bi 7.0
how can i found hierarchy selection tab in infopackage
Regards,
narasimha.

Hierarchy loading is the same for info object which is created under the info object itself.
loading is uploading the data to the hierarchy, creating hierarchy is you will be maintaing the structure of the hierarchy under that info object
Are you sure you have Hierarchy maintained for your info object?
If the hierarchies are maintained you will find the Bell type symbol under the info objects in info providers tab.
As told by mti - drill down till you find the data source --right click on it and select create info package - here you can find the tab hierarchy selection tab (which is the second tab in that screen).
Check the below link to know more abt hierarchies
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm

Issue with F110 - FREE SELECTION TAB.

Hi All,
I am facing one problem for updating the FREE SELECTION TAB for FIELD NAME and its corresponding value. For this update I am using BDC.
If I create the proposal manually then the values get display after saving the proposal entry. But if I do the same through recording, it does display the message on status bar as "Details have been saved for the run".
Any help is appreciated.
Thanks,
Atul

Following is the recording that works in 4.7 but doesnt work in ECC 6.0 version.
The values under free selection gets clear in ECC 6.0
Can anyone please help.. !!!
Thanks in advance..
Atul
report ZF110_NEW
       no standard page heading line-size 255.
include bdcrecx1.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_CURSOR'
                              'F110V-LAUFI'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SEL'.
perform bdc_field       using 'F110V-LAUFD'
                              '01/22/2007'.
perform bdc_field       using 'F110V-LAUFI'
                              '2712'.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_field       using 'BDC_CURSOR'
                              'F110V-LIST1(02)'.
perform bdc_field       using 'F110V-TEXT1(01)'
                              'BKPF-BELNR'.
perform bdc_field       using 'F110V-TEXT1(02)'
                              'LFA1-LAND1'.
perform bdc_field       using 'F110V-LIST1(01)'
                              '1000001'.
perform bdc_field       using 'F110V-LIST1(02)'
                              'PA'.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBCK'.
perform bdc_dynpro      using 'SAPF110V' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBCK'.
perform bdc_field       using 'BDC_CURSOR'
                              'F110V-LAUFD'.
perform bdc_transaction using 'F110'.
perform close_group.

Payment Program Free selection tab fields

Hi,
We would like to pay the vendors against the open items which are due upto a date in the past. For example when we run the payment proposal today(05-10-2011) we want the system to list and pay the invoices which were due on a date a week ago(05-03-2011).
The due date field is not available in Free Selection tab to exclude. Any idea how to make it working?
Thanks
Ram

Dear:
Due date is calculated from the date at which proposal is run and posted you can make proposal run in back date as well. IN free selection tab when you give invoice numbers, the system will automatically pick the invoices coming within the range and leave the invoices not yet due.
REGARDS

Service selection tab in Service entry sheet

Hi,
When i am trying to create Service Entry Sheet using ML81N, service selection tab is not displayed at the bottom.
So i am not able to adopt the services from PO.
This is working fine in dev and prd, but the problem is with qas.
please let me know what could be the reason.
Thanks.

Guys,
this is the problem raised from client side,
we didnt observe since how long this problem persists only in qas.
Basic things like authorization, entering for correct PO....i have taken care off.
And i checked there is no transaction variant also for this ml81n.
There is no BADI implementation also reg this function/
I am not sure, what else i left,
please if anyone faced similar problem, let me know the solution.
thank u all for ur time.

Use ABAP Routine in Selection Tab of Infopackage

I am trying to use the ABAP routine in the InfoPackage SELECTION Tab to "EXCLUDE" a value. For example, I want to load all the Material types, except ZUN1. But, when I write in the ABAP, l_t_range-sign = 'E' instead of 'I' or l_t_range-option = 'NE' instead of 'E', I get an error saying these values are not permitted.
Is there any way to exclude any value from Selection in the InfoPackage?
Regards,
Milind Vad

Hi dear and welcome on board!
You have two options:
include everything you want in your IP
load everything and exclude what you don't want in the start routine in transfer rules
No other ways...
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

Programatically Selecting Tab

Similar Messages

Maybe you are looking for