Programmatically set the default of a control

Hi, I am working on an application where in one part of the program the user can apply a waveform, then in a different subvi is this waveform is applied/not applied the default value of a certain control will be either digital trigger or no trigger.
In short I want to know how I can set the default of a control based on the t/f of a boolean control. I have attached a vi where I set the value, but in this vi, the value is permanent, I want to set the default but still allow the user to change the value if so desired. Any help would be greatly appreciated.
Attachments:
Programatically set value of control.vi ‏9 KB

In short I want to know how I can set the default of a control based on the t/f of a boolean control. I have attached a vi where I set the value, but in this vi, the value is permanent, I want to set the default but still allow the user to change the value if so desired. Any help would be greatly appreciated.
DEFAULT values cannot be set at run time period- the default value is contained in the compiled code so changing a default value forces a re-compile obviously something that the Run Time Engine can't handle. It is possible to load values from a file and apply those values to the control. You can even make a decision at run time what value to load based on your boolean.
Look through the help for the configuration file operation palatte you'll get some ideas.
Jeff

Similar Messages

Does anyone know how to change where incoming (via mail) calendar requests go on my MacBook? Mine insist on going to Entourage, which I don't use any more. I've tried setting the default calendar in iCal preferences. Doesn't help. Bugs me. Can you help?

Does anyone know how to change where incoming (via mail) calendar requests go on my MacBook? Mine insist on going to Entourage, which I don't use any more. I've tried setting the default calendar in iCal preferences. Doesn't help. Bugs me. Can you help?

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

How do I set the default size of a new folder?

I have finder sized the way I want for existing folders and if I do Finder > New Finder Window. These preferrences, however, do not seem to apply to new folders. Everytime I create a new folder on my desktop, and open that folder for the first time, the window size is really small and the sidebar is narrow. This is incredibally annoying. How do I set the default size for all new folders? Is there a plist file I can edit to fix this? Or an AppleScript I can run automatically in the background that fixes this? I am running Mavericks 10.9.1.

If you use the Finder's New Finder Window command (command N) to create a new window, resize it, place it where you want, and set it for icon view or however you want it. Then close it. Closing it is what sets these as the default. That should become the default for every new Finder window you create using the new window command. But if you have lots of windows open at once and then close them, the last window you close will set a new default.
There are lots of utilities that control Windows - their size and placement. I use one called Moom but there are many more.

I can't seem to sync my calendar on my iphone to iCal because the default email address associated with my calendar on my iphone was to an old work email address that I no longer have.

I can't seem to sync my calendar on my iphone to iCal because the default email address associated with my calendar on my iphone was to an old work email address that I no longer have. When I go to ICal it asks for the username and password which I no longer have. The calendar is still on my phone (even though the email account is on my phone but doesn't work) Is there a way to copy my calendar to a different email address on my iphone? I have now set the default email account for the calendar to a current email address but I still can't figure out how to merge my iphone calendars, copy the iphone calendar to iCal, or save my iphone calendar to my mac. Also, I read in ITunes to check "sync to ICal" but my ITunes under my iphone and info just says "Sync Calendars" which doesn't transfer it to iCal when I sync my phone.

iCloud: Troubleshooting iCloud Calendar
iCloud: Advanced Calendar and iCal troubleshooting

How do I set the default file path for the Place command?

I keep my graphics files for each document in a particular folder. Every time I open an existing InDesign document and place a new image I have to browse back to that location - even though all of the previous images in that document came from the same folder. InDesign does not remember the file path that was used previously in the document. This is very annoying.
IS THERE A WAY TO SET THE DEFAULT FILE PATH, OR LOCATION, FOR IMAGE FILES?
I have looked through the preferences, searched the forums and internet, but I have not found any reference to setting default paths. Is there a setting like the one in MS Word called "File Locations" on the Options toolbox?
Thank you.

Since you're working in ID on Windows, you can take advantage of a neat trick in Windows. Copy the file path out of the File Explorer address bar and paste it directly into the Place filename field. That will jump you directly to the desired volume. For example, let's say I want to place a graphic located at X:\PS Jobs\May PS\709672bp\Working Source Files\Links. I copy that entire path from the File Explorer address bar, go to InDesign, select File|Place, and press Control + V to paste that path into the filename field. I press the Open button and Shazam! I'm there instantly, without a bunch of navigation.
You can do the same thing in the File|Save As and File|Export fields. Let's say you want export a PDF file from InDesign to the volume X:\PS Jobs\May PS\709672bp\Working PDF Files. First copy the desired file path from the File Explorer window. In InDesign, select File|Export, click anywhere in the filename field, and press the Home key to move the insertion point to the front of the filename. Press Control + V to paste that path in front of the filename, then add the backslash character (\). The filename will now look like this: X:\PS Jobs\May PS\709672bp\Working PDF Files\Filename.pdf. Press the Save button to bring up the Export Adobe PDF window. Select your desired PDF preset, press the Export button, and the PDF file will magically appear in the desired volume.
This sounds really complicated, but it's not. In practice, it only takes a few seconds. I probably save an hour's worth of needless navigation every day with this technique.

Can I set the default locale for jvm

Hi,
Can I set the default locale for jvm?
How to do it?
Pan

My windows default locale is chinese .I have thought of your opinion. But in
windows nt , if I change the locale , all the environment will be
destroyed(just like reinstall it , it's difficult for me) . So , Is there
any other approach?
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Did you try to change the locale in the Windows control panel?
(Control panel -> Regional Options -> Your locale)
Pan YangBin <[email protected]> wrote:
I have tried changing this system property and other properties such
as -Duser.language=en -Dfile.encoding=Cp1252 , but all these properties
did
not changed, you can get this infomation from the log file .Maybe these
system properties are readonly.
Thanks very much.
Pan
Chris Halstead <[email protected]> wrote in message
news:[email protected]...
Try adding -Duser.region=US to the java command line used to start
WebLogic...
-chris
"Pan YangBin" <[email protected]> wrote in message
news:[email protected]...
Hi,
The problem exists in my project still exist.That is it.
When I did not set weblogic.jsp.encoding to GB2312 in my web
application(web.xml), and when the jsp file contain's chinese , the
output
will be error(error chinese) .And when I did not set it , the output
is
correct, but when I use request.getParameter("SomeFormElement")(theelement
inputed chinese), the return value is error(still chinese error).And
when
I
am in windows nt english version and do not set this property, all
these
two
problems dispear. And I try to compare the java files those were
generated
by weblogic from the jsp file , there is only two additional clause
in
the
java file. That's it:
((weblogic.servlet.jsp.JspWriterImpl)out).setEncoding("GB2312");
response.setHeader("Content-Type", "text/html; charset=GB2312");
(the web.xml has <context-param>
<param-name>weblogic.jsp.encoding</param-name>
<param-value>GB2312</param-value>
</context-param> to be set
So, I think maybe it works well if I change the default locale toenglish.
And unfortunately, your method is also failed.(I have to use weblogic
in
chinese environment)
Would you please help me to solve this problem?
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Try java ... -Duser.language=en ...
or mode con cp select=437 in the command prompt before running
weblogic.
Pan YangBin <[email protected]> wrote:
I'm using weblogic server 5.1 sp6 in chinese environment, and I
want
weblogic compile my jsp with en_us locale . So I can't use
Locale.setDefault(new Locale(...)) to set the default locale ,butI
really
want someway configure.
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Locale.setDefault(new Locale(...)) ?
Pan YangBin <[email protected]> wrote:
Hi,
Can I set the default locale for jvm?
How to do it?
PanDimitri
Dimitri
Dimitri

How do I set the default in Firefox to NOT auto update?

I am being asked to create an installer for Firefox that sets the default to NOT auto update. We have Standard users who cannot load software, so do not want them to be prompted. WE want to control when programs get updated, so need to set the default in Firefox to not prompt to update anything. How do I do this? What file can I change?

I've tried that, and then created my installer, but it defaults back to having auto update checked, or in the ON position. I want it to default to being OFF so any new installs or upgrades that I send out do not turn it back on.
We manage all computers here, and do not want users doing any updates.

Set the default printer setting to landscape in Excel

Hi,
Is it possible to set the default printer setting to "1 page wide" and "landscape" whenever the user clicks print in Excel? I am trying to create an Excel report using XML and XSL. Though the report is created, I am not sure if I can control the printer page setting for MS Excel. Kindly let me know if its possible. If so, how can it be done? its kind of urgent.
Thanks

Your question was posted in the wrong forum.

How to set the default language for JRE?

I appreciate the fact that JRE is intelligent enough to select language according to my system default codepage, which is 936 (Simplified Chinese). However, i don't find any option in java control panel or java.exe command line switch to change the codepage for Java back to 437 (which is the default codepage for US english). Is there any way to make the change?

Thanks, finally i have a way to eliminate Chinese characters in console output. But I'd like to go one step further. Is there any way to permanently set the default encoding for JRE? I don't like the idea of having to add -Dfile.encoding every time i run a java program.

Setting the default character encoding

How do you set the default character encoding for the portal to UTF-8 so that unicode
characters work within porlets?
Any help would be much appreciated,
Troy

You can put this tag in the portal.jsp in the header:
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'>
"Troy" <[email protected]> wrote:
>
That doesn't seem to work when put into my portlet's content JSP. Is
there another
place I could put the page directive that will control the entire portal
page?
"Sai S Prasad" <[email protected]> wrote:
Troy,
you can try the page directive with encoding as:
<%@ page contentType="text/html";charset="UTF-8" %>
"Troy" <[email protected]> wrote:
How do you set the default character encoding for the portal to UTF-8
so that unicode
characters work within porlets?
Any help would be much appreciated,
Troy

How do I set the default from email for invititations

I use my ical calendar for different business and personal calendars.
Is there any way to set up the "from" email account to coinscide with the calendar the event is made for.
i.e. If I make a personal event, the invite is sent from my personal e-mail, and if I make a business appointment, the invite is sent from my business account.
I was able to do this with google calendar, but I am trying to be all in the cloud.
Any help would be appreciated.
P.s. running 10.7 and iCal vs.5.0.1
Thanks

I understand that you want each of several email accounts to act independently, such that mail for account 1 is sent and received only on that account, then account 2 likewise, etc.
For each email account, left click on the account name and then select 'View settings for this account'.
On the 'Account Settings' page, look at the 'Reply-to-Address' (should be blank) and also select the 'Manage Identities' box, which shows the default name and email address. If the default is not for that account, you can add or edit the entries and set the default.
Back on the 'Account Settings' page, select 'Outgoing Server (SMTP)' and check the user name/account there. It should be for the same account.
For each account, the other accounts should not be mentioned in any of the places identified above.
- duggabe

Set the default boot.

How to set the default boot to OSx? And what button is the "option" on my macbook pro 13 2011 ?

If you installed the drivers sofftware then there should be a Startup Disk control panel in Windows. However, you can boot back to OS X without it:
From Windows restart the computer.
After the chime press and hold the OPTION (ALT) until the boot manager appears.
Select the disk icon of the OS X volume.
Click on the arrow button below the icon.
Once back in OS X you can use Startup Disk preferences to reset the permanent startup volume.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Can I set the default save location in text edit to dropbox?

I'm happy with dropbox for now and want to set the default save folder to a dropbox folder but I cannot see how to do this.
Can it be done? Or do I need a 3 party text editor?
Thanks
Tom

You cannot. Because this option both takes much longer and reduces the quality of files, it has to be chosen specifically.
In any case, when you save a PDF file from Word. this process does not involve Acrobat or Adobe software in any way.

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

Programmat​ically set the default of a control

Similar Messages

Maybe you are looking for

Programmatically set the default of a control