Project Confirmations

Dear All.
For An Internal Activity Dropped under a Network i have entered a estimated man hours for Designer with an activity type and activity rate.
Based on this i have budgeted & released the WBS with CJ30 & CJ32. Subsequently i have released the Network activity after which i have partially confirmed the network activity.
Now the problem is;
if i estimated, budgeted and released the activity for about 100 Hrs of man power.
Further, i partially confirm only 10 hrs with t.code CN25.
Now i can go into project builder CJ20N in edit mode and Edit/Change/Delete the activity which was partially confirmed with an information message CN703.
Can anyone advice me how to stop this?
Regards
Kaashif M

Hi,
I agree with Murali. You can do your requirement in the way explained by Murali.
The user status can be set by an enhancement which will set the user status when confirmation is done using exit CONFPS05. The user status will have transaction control not to set the deletion flag.
Or this is just a suggestion you need to check the feasiblility of the below.
develop an enhancement which will trigger in user exit PPCO0002-Check exit for setting delete mark / deletion or indicator when u delete an activity and check if the activity is PCNF or CNF if yes then dont allow deletion.
Regards,
Pavalavel.

Similar Messages

Re :- project confirmation Delay

Dear kings
i am doing project confirmation for activity. It has been takes processing is very late. But projct has confirmed completed successfully. Why it takes so much os time. It processing is going on very late. Here i am not getting any errors. Only problem is processing late.

Don
This workflow is wrong for DVD creation.
What you should be doing is:
export a QT file from FCP self contained with current settings.
take the QT file into Compressor and create an m2v video and an AC3 audio file
import those into DVDSP and author.

Project Confirmation

Dear All,
Appreciate your help to clarify the following issues with related to the PS module.
1. What exactly happens when the activities of a project is being confirmed?
2. Can the system restrict in issuing materials once the activities are being confirmed.
3. Once the items are being reserved and the activity is confirmed, is there is a way to issue the materials.
Thanks...

Hi,
1.Effect of activity confirmation:
reducing work center capacity load
update actual cost based on confirmation data.
dates updation for wbs elements
removal of billing block from billing plan
triggering of milestone functions
2.System restrict in issuing materials once the activities are being confirmed:
system can restrict an issue of material once that activity is confirmed, by using user status profile in customizing.
3.Items are being reserved and the activity is confirmed, is there is a way to issue the materials:
this can be posibble..... If the goods cannot be issued, you receive, depending on the confirmation parameters in Customizing, an error message or an error log.
You can reprocess goods issues that have errors and:
*Carry out planned material issues (depending on the settings you made in Customizing for confirmation parameters)
*Carry out unplanned material issues.
Regards,
Sandeep

Blue Ray Project done - time for SD

Ok I have fininshed my Blue Ray projct and made my iso. Stupid question time. Can I go to project settings and change the project to DVD to make my SD or should I start a brand new project? Thank you.

I have not done this, and what we see here in the forums are examples of problems trying to do this.
But Adobe has designed the Encore project settings to do just this.
If you have popups or multipage menus, they will not work in DVD, and this reduces the chances of your saving time rather than just doing a new DVD project.
If not, I would do a final "Save" of the BD project, change the project settings to DVD, do a "Save As" (to try to protect the BD version) into a new directory and with a new name for your DVD project, confirm the menu settings are 16:9, check the DVD transcode settings, set the build to DVD and the output to folder or image (for testing), and see what you get.
Is anyone using the same project successfully going from BD to DVD? Are there other steps to cover?

Dyman & Associates Risk Management Projects: 10M Passwords Publicized For Research

We've all heard of this before: a hacker releasing a certain number of passwords and usernames, presumably just for the lulz. But this time, we're talking about 10 million records posted by no less than a security specialist himself.
Security expert Mark Burnett has published 10 million sets of usernames and passwords online in an effort to equip the security sector with more information, while also getting himself potentially tagged as a criminal.
He clarified that his release of the username-password list is solely for white-hat purposes -- to aid research in making login authentications more effective and fraud-proof. Burnett insisted that he does not intend to help facilitate any illegal activity
or defraud people by his actions.
"I could have released this data anonymously like everyone else does but why should I have to? I clearly have no criminal intent here. It is beyond all reason that any researcher, student, or journalist have to be afraid of law enforcement agencies that
are supposed to be protecting us instead of trying to find ways to use the laws against us," he said in his post.
Leaking a massive amount of user data into the wild certainly does not sound like great help for most people but for security professionals, it's an important tool for research. For instance, how else would they know that online users are generally bad at choosing
passwords?
In his post, he shared that he would often get requests for his password data from researchers but he would just decline them before. But since he also know its importance, he decided to publish a clean data set for the public.
"A carefully-selected set of data provides great insight into user behavior and is valuable for furthering password security. So I built a data set of ten million usernames and passwords that I am releasing to the public domain."
To be fair, Dyman & Associates Risk Management Projects confirms that analyzing a username-password set seems to be more helpful for the security researchers.
According to him, it was by no means an easy decision but he eventually posted it after weighing down a number of factors. And though Burnett said he believes most of the data are already expired and unused, the domain part of the logins and any keyword that
could link it to a certain site were still removed to make it difficult for those with criminal intent.
Besides, Dyman & Associates Risk Management Projects experts agreed with him in saying that if a hacker would need such a list in order to attack someone, he's not going to be much of a threat.
Burnett has previously helped in collecting the recent list of worst passwords to alarm people into adopting better practices when it comes to their login credentials.
Lastly, he imparted the following warning for complacent users: "Be aware that if your password is not on this list that means nothing. This is a random sampling of thousands of dumps consisting of upwards to a billion passwords."

Error in Integration of Defect Module of HP QC with SolMan Ehp 1

Hi,
We are using QC version 10 patch 12 and connected with SolMan Ehp 1 for testing.
We are facing a problem in integrating the defect module of QC with Service desk of SolMan.
The required settings are done in SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Defect Management.
SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> External Service Desk
We have also implemented the SAP note 1289155.
We are not using the Standard message type SLFN instead we have ZLFN.
See the bellow error message in QC during field maping.
The number of required defect fields in Quality center is different from the number of required support message fields in Application: u201Ceclsh112; WAS; 100u201D. Make sure the number of required fields is equal in both systems before you continue.
Can any one suggest on this.
Thanks in advance.
Praveen

Hi Praveen,
Try this it should solve the issue.
It seems that there is something wrong with your configuartion for the external service desk.
If possible could you remove the external service desk from in
Transaction ICTCONF and redefine it again?
Once you have done that please do the following steps:
- Go to the Solution Manager project
- Open the dialog to connect to a QC project
- Confirm the dialog.
This will update the assignment with all technical details.
You can check the results in the Site Admin. There navigate to the corresponding QC project and check the content of table BLUEPRINTS. There should be exactly 1 entry with the relevant information for the service desk integration (see attached "BLUEPRINTS(QC).doc").
Hope this helps.
Thanks,
Raghavendra.

Create Tasks Due dates

Hi All,
I'm new to SharePoint, I'm having requirement of setting a Project Management tool in which the start date, end date of task to be calculated automatically based on few parameters. For example lets take a Project called Project A which has list of tasks, lets
say *Task A, Task B, Task C etc. The start date of Task is*Project confirmation date + 1 and the end date is 2 days from the start date.*
*Now if a create a custom field called Project confirmation date can we calculate the start date and end date of the task automatically, Similarly there are other parameters for Task B, C etc. Is this kind of a set feasible in SharePoint? Please help.
Thanks and Regards,
Goutami

create task list which is available oob in sharepoint then use calculated columns as below links reference:
http://msdn.microsoft.com/en-us/library/office/bb862071(v=office.14).aspx
http://sharepoint.stackexchange.com/questions/59504/calculated-column-to-calculate-date
http://sharepoint.stackexchange.com/questions/74474/get-the-month-from-a-date-column-with-the-calculated-column
=DATE(YEAR([project confirmation date]),MONTH([project confirmation date
]),DAY([project confirmation date
])+1)
=DATE(YEAR([start date
]),MONTH([start date
]),DAY([start date])+2)
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Panasonic 100a Advanced/Anamorphic Render?

Hello,
One of our shooters has a Panasonic 100a and I decided to find out how 24 fps looked... So we shot 24 frames advanced, anamorphic. In FC, I set my sequence for 23.98 advanced pull down and check the anamorphic box. The resulting captured sequence looks and plays fine and the settings from the sequence match that of the captured clip. However, each clip needs rendered? And the render is almost 1:1 or 1-minute of video = 1 minute of render (D2.7). So I am thinking I did something wrong. So my question is what did I do wrong?
Mike

Yes... I did that each time I've tried a new attempt. My latest frustration is now I can't get back to true widescreen even needing a render.
Here was my latest workflow:
Open FC > close any project > choose easy set up > 24 frame advanced. Don't change anything else. Resulting clip does not need rendered. Playback on computer monitor shows correct widescreen. Playback via DSR 11 shows incorrect (squished) widescreen, though not as squished as the actual tape footage appears.
Next: close project > confirm easy set up > from within audio video settings > sequence presets, edit = 720x480 DV 3:2 anamorphic is checked. From capture presets, edit = 720x480 DV 3:2, Anamorphic is checked. Resulting clip plays the same (nothing really changed, I just went into Audio/Video settings> edit to confirm the settings.
Again, (close project etc....) this time I change both sequence & capture to NTSC 4:3 (from DV 3:2). Clip behaves the same (not true widescreen on the external monitor) but now it needs rendered!
Next- keep the sequence preset NON-anomorphic but the capture preset Anamorphic. Now I get the proper display on the external monitor, and a green line for realtime playback but final sequence needs rendered. Closest so far.
This whole process has brought up two other things to test: if I capture anamorphic sequence & capture preset which means my clip isn't displaying properly on the external monitor (via a DSR 11 BTW) BUT I tell DVDSP to burn anamorphic, does DVDSP "correct" my display issue?
Last question- somewhere during all of this, my blank viewer & canvas screens have turned green. Before they were simply black when blank/empty. Not sure it matters?
Mike

Deleted Gaps Reappear?!

Hi. I'm working on a complicated, timelapse-image based project. I've encountered a problem in FCP X that I cannot workaround. Gaps are randomly appearing in my timeline. I don't know why. Using the clip list tool, I search for all the offending gaps, delete them individually, re-do the transition (LOTS of cross-dissolve and keys in this project), confirm the edit visually, move on to the next gap and repeat. For the current sequence, I've now done this from start to finish three times, rendered out to video, watch the video and voila!, the gaps are back, right where they were. I re-open the project, open the compound clip timeline, remove the gaps, fix the transitions, confirm the edits, render video and THEY'RE BACK! ***!?

I'm jumping back in to let everyone know that after upgrading to 10.0.1, the problem persists. This has to be a bug, so I'll report it to Apple. To confirm the bug, I re-edited the entire sequence, removed all the spurious gaps that reappeared (AGAIN!) after being manually deleted. To be sure it was not an auto-save issue, I left the project overnight after editing to complete rendering without closing the app or project. In the morning I confirmed visually and searching the timeline index to make sure all gaps were removed. I made the entire sequence a composite clip to export. Then I export the clip to video. The new video has all the gaps restored, and if I go back to edit the sequence in the timeline, all the gaps I removed have come back. It's worth noting that I, at no point, inserted any gaps manually myself. All of this hooey has to do with gaps that appear magically AND CAN'T BE REMOVED. Thanks, Apple, for cutting a couple of weeks from my income. I can't charge the client for continually re-editing the same sequence, which I've now been doing since 9/12.
The one-step transitions are nice tho.

Project Contracts Deliverables : Unable to Ship Confirm

Sub : Project Contracts Deliverables : Unable to Ship Confirm
Hi,
When trying to " Ship Confirm " for deliveries initiated from Project Contracts, Error Msg appears :
Error : Some deliveries selected for ship confirm have errors or warnings.
On clicking DETAIL buttton :
Error:Delivery Details xxxyy in this delivery do not satisfy inventory controls.
Warning:The Ship Confirm Option selected will unassign all the lines from delivery yyyxx.
Regards
adi

Hi,
Please check the metalink note: 227843.1 for this issue.
Hope this helps!
Thanks,
Sathish Raju
www.projectsaccounting.com

Project explorer doesn't show callers for .rtm (run time menu) files (is this a confirmed bug?)

Maybe I was to quick to report this as a bug... I was unable to find anything related to it at my normal sources of information. Does someone has exeperience with it?
I have a work-around and this is included in the description :
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=6776 (message 25)
** Original post **
When a library (.lvlib) that contains a file with a run-time-menu (.rtm) file is removed from the project, but there is still a file that uses this .rtm file, both the .lvlib and all of it's vis and the .rtm file are displayed in the project Dependencies.
For the Vi's the callers can be found by 'Find->calllers'. For the .rtm file this always results in 'No items found' but the .rtm file remains in the Dependencies (as it should since it is still used).
Finding the .rtm file can be hard since it is only loaded at run-time and not at edit time(?). If someone encounters this issue, a working method:
- rename the rtm file (so it cannot be found)
- open the vis that you suspect are using this file AND try to edit the run-time menu. When this vi uses the run-time menu a warning will appear (cannot load rtm file, using default menu instead)
Kind regards,
Mark

Dear Mr. Beuvink,
thank you for your reply. It seems that a while back this problem has been reported to our R&D group. The request (CAR) has ID; 41579. There is the following statement in this CAR: the caller vi is in memory or not. When a caller vi is in memory, rtm files will currently never report the vi as a caller. This confirms the behavior you are seeing.
I'm sorry to say I don't have a solution at this moment, at this moment they are busy fixing this problem. You can look this up in future release notes by searching on the CAR ID I mentioned.
If you haven any questions, please don't hesitate to contact me.
Best regards,
Martijn S
Applications Engineer
NI Netherlands

CProject evaluation table: How to get project-related task confirmation

Hi everybody.
I'm working on cproject and this is my problem:
In my report i can get details related to an assigned project (i know Project guid) in this way:
CALL FUNCTION 'BAPI_BUS2172_GET_DETAIL'
    EXPORTING
      project_definition_guid      = project_guid
    IMPORTING
      es_project_definition_detail = es_project_definition_detail
    TABLES
      et_name                      = et_name
      et_status                    = et_status
      return                       = return.
This bapi let me know the total confirmation status of my project ( this value is contained in the ACT_WORK_EFFORT of the standard data base table DPR_PROJECT ).
I would like also to get the confirmation status of each task related to this project ......
i think that these values are contained in the field ACT_WORK_EFFORT of the table DPR_TASK .... but i'm not able to select all and only tasks related to a single progect ....
Thanks,
FG

Ok! found the right sequence of BAPI !

Project deleted in iPhoto 11 ver. 9.1.1 After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i

Project deleted in iPhoto 11 ver. 9.1.1
After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i didn't read, dummy) by pressing the delete button. The whole project was gone, the undo menu was grayed out and there was nothing in the iPhoto trash about my Book.
Surly I can find this if I knew the path to find the project in a library on a back column I have of my hard drive.. Could anyone help me?

Sorry I'm having a hard time getting this.
If I go to my hard drive BIGMAC>Library>Application Support>iPhoto>the only thing in this folder is Themes.
However, when I "Get Info" it's 580MB for 24,421 items. iPhoto says I have 35,977 photos. I would think the database would be into the GB for this many photos.
If I go to BIGMAC>system>Library>I find nothing about iPhoto
Is the iPhoto file in the Application Support the one I need to replace with my backup?
Thanks so much for your help.
Jack

(project system) do book confirmation amount as a actual cost

HI all
it is possible in project system when i confirm my activity then it does not book actual cost to my network activity.
because i need to show this confirm amount as only for information purpose....my clint requirement.
thanks

with the material ledger, actual costs are not only used to value the stock at the period end. You also have the possibility to revalue the cost of goods sold with the actual costs of production for the period.
The system takes initial stock, initial value, production of the period, actual costs of production of the period to calculate "cumulative stock of the period" and "cumulative value". The cumulative value per unit is then applied to all consumption of the period (goods sold) and the final stock.
Your only alternative to the material ledger would be to value yout finished goods at V-price, not S-price. The problem with this is that you don't necessarily have all the information about actual costs at the moment your finished product enters stock. For example actual activity prices can only be reasonably calculated per period.
Whether V-price is an option depends on the details of your scenario.
To me material ledger is the right way to value stocks and COGS at actual cost.

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

Project Confirmations

Similar Messages

Maybe you are looking for