Project Control settings

According to all the tutorials and documentation I have, the project controls should be at the top of the project window: sample rate, tempo, key, time signature. But all I have at along the top of the project tab is the sample rate. Is there a setting that turns these slider and pop up menus on and off?

Yes, I understand that, and know where they are, but on all the demo tutorials and in the Apple Pro Training series book, all these settings are also displayed along the top of the project window as buttons or pull down menus. Those are what I would like to see.

Similar Messages

Remote Control settings for Markers

The user manual for Studio Pro 4 states that Remote Control settings for Markers will override all other settings while that part of the track or story plays.
This however, is not the case- In my project the track & story settings for Remote Control>Menu are actually overriding marker Remote Control>Menu settings, & I really need the marker functions to take precedence over other functions.
Any idea how I can make this happen?
Thanks!!
eric

As Jake said - I am not seeing this behaviour either.
If you clear all end jumps from chapter markers and place the markers into stories then you set the menu call for the story. This can be different to the track and depending on which you are playing the menu call for that item will take precedence.
Of course, if you really want to make it bullet proof then you could point the menu call to a script. Assuming that no matter which story you are in, or how you got to the marker in the track, the following script will always return you to a specific button on a menu for the marker that you have just played
mov GPRM0, SPRM7
Jump Menuname, [GPRM0]
SPRM7 is a system parameter that checks which marker has just played. The first line of the script loads the value of this into a memory slot called GPRM0. The second line operates a jump to your menu - I assume there is only one menu here - and using a conditional GPRM based button jump, the value of GPRM0 fills in the value of the button to go to. This saves writing out lines of code for each possible button.
If you have lots of menus then this script can be adapted very easily to cope with that, or you can set up other scripts to identify which menu you have come from so as you know which to go back to.
However, before any of this I would want to know why you are not getting the expected behaviour on our project - my guess is that there is going to be a menu call set into a chapter marker which is over-riding the track or story menu call. If you have end jumps on markers, or menu calls on markers, remove them.

Will Aperture ever support Nikon or Canon Picture Control settings?

As with many people, I've also run into two issues:
1) The RAW Picture Control settings used by Nikon don't seem to be supported by Aperture. I've downloaded the latest Camera Raw update (2.4) and yet it still seems that none of the settings get interpreted by Aperture. As a long-standing Aperture user, this is a major issue since it now requires me to import into either ViewNX or Capture NX2 and then transfer them to Aperture. Since I use Photoshop for dodging and burning, I'm beginning to wonder if I should just move to Lightroom.
2) The highlights seem to get blown out fairly easily when viewed in Aperture. I often seem to have to pull back the highlights on many pictures.
I was wondering if these are still persistent issues that others see as I'd like to consider what reasonable options I have.

Jade, you gave up to easily!!!
I would guess that Nikon makes most of their money from cameras, lenses, nik software and very little from NX software. While NX is fine for small projects, it is way to slow and plodding to be a meaningful workflow product.
But, if Nikon teamed up with Apple so that Aperture could incorporate most of what is in NX under a licensing/royalty agreement, Nikon would sell lots more of their core products, Apple/Nikon software would be come the default workflow processing solution and would set industry standards for digital imaging for the pro. Canon would be forced to follow suit or fall very far behind. Nikon has done a wonderful job in bringing their bodies to leading the pack, they need more work on lens, IMHO, and a meaningful relationship or co development with Apple would seal the third arm of the puzzle.
Consumers, Apple, and Nikon all benefit from such a model. Just have to get to terms that are acceptable and, as typical in these situations, there are too many big egos involved and unwilling to see the forest through the trees.
Food for thought.....maybe....

FCPX Project Render Settings - Can you edit in h.264 and Transcode/render only used clips on timeline to Prores during render?

I have a question on the PROJECT RENDER settings in FCP X. It’s seems to me that one could theoretically import and edit entirely with original h.264 video files without needing to Transcode to ProRes422. Once you’re done with your edit and want to get the added benefits of COLOR GRADING in ProRes422 color space, it seems that FCPX will automatically render your edit in ProRes422 according to these preferences. In that case, a color grade could be applied to the whole edit, and be automatically transcoded/rendered into ProRes 422 during the render process. After rendering, what would show up on the viewer and what would EXPORT would be the rendered Prores files and not the original h.264 files. This saves a lot of time and space of transcoding ALL your media, and in theory should enable you to edit NATIVE video formats like h.264, with automatic benefits of ProRes during render. I'm assuming the render may take longer because FCPX is having to convert h.264 video files to ProRes422 while rendering. This may be one drawback. But will you your color grade actually use the 4:2:0 color space of the h.264 native media, or will it utilize 4:2:2 color space, since the render files are set to render to ProRes422 ? Can anyone please confirm that this theory is correct and optimal for certain work flows?? Thanks!

Thanks Wild. That's what I thought - in that the render files would be converted to ProRes422 codec. So do you or anyone else think that there is an advantage to having the 4:2:0 original file be processed in a 4:2:2 color space?
Yes there is an advantage, any effects and grading will look better than in a 4:2:0 space.
Most professionals online seem to think so. Also - will rendering of heavy effects and color grading take longer using this method because it's having to convert h.264 media to ProRes during render?
Yes, it will definitely take longer.
Can anyone verify from a technical standpoint whether editing and color grading in this workflow will see the same benefits as having transcoded the h.264 media to ProRes in the first place?
Same benefits from a final product view point, you lose on rendering time though and if you have lots of effects things will seem slow as it will have render everytime from the h264 file rather than a Pro Res file for every change you make. This may be fine on a higher end mac but I'm sure just pummels an older lower end mac as to being almost useless.

STO Process Copy control settings

Dear Gurus,
I am having issues with item number in purchase order and delivery document. I require the same item numbers in purchase order to be copied to delivery document. I think i got to do something with copy control settings. Please help me. I am confused since its an STO process.
Thanks in advance

Hi George,
Here customization can be done as follows:
Step 1: SPRO --> MM --> Purchasing --> PO --> Set up STO
In this step the customer number and sales area is assigned to Supplying & Delivering plants.
Step 2: SPRO --> Logistics Execution --> Shipping --> Delivery --> Copy control --> Specify Copy control for Deliveries
Check the settings made for DL to NL (STO) and DL to NLCC (Cross company) copy control settings.
Step 3: T.Code OVLK
The Delivery document types NL and NLCC needs to be assigned with "B" in the order required field. Thus, the system understands the data for delivery document has to be copied from Purchase order.
Thanks & Regards,
Sharan

Project controlling with Solution Manager

Dear SolMan community,
we just finalized in a SAP Retail implementation project the planning for the release phase. Input for the planning activities were numerous functions that were already created in SolMan. We decided to use Excel to conduct a bottom-up / top-down planning. The SolMan function defines the scope. For every function we defined planning elements, namely start/due dates for functional documents, business concepts, customizing, development (RICEFW), and most important the unit test date for the function. The problem we have is that we have the SolMan content and the release planning excel in parallel and might suffer from a redundant maintenance. The release plan has almost 1.500 planning lines in it, and keeping it consistent with SolMan is something likely impossible. Has anyone experience in using SolMan for project control in release phase? I need various views on the SolMan content for my project control, but can´t see that SolMan reports give me the flexibility I have with Excel. And even if you download them to Excel there is still some maintenance required before one can use them for controlling purposes.
Any help is very much appreciated.
Regards,
Markus

Hello Markus,
If you have maintained an implementation project in the SAP Solution Manager with transactions SOLAR01/SOLAR02 you have a lot of reporting possibilities with transaction SOLAR_EVAL.
Best regards,
Veit.

Issue while installing Project Controls application in Unifier 10.1

Hi ,
I am installing Unifier 10.1 under weblogic 12c. Everything went fine till deployment and logged in as Site Administrator to install the Project Controls application .While trying to install the application , after a certain period of processing time, I received a popup saying 'upa1 not found in unifier_bp' after which my install button got disabled and nothing was shown under Applications . However , I could see the company administrator was created and most of the BPs and workflows were also created . But I am not sure if everything got installed properly due to this popup received . PFA a document that has the screenshots for your reference .
Thanks,

Hi ,
I am installing Unifier 10.1 under weblogic 12c. Everything went fine till deployment and logged in as Site Administrator to install the Project Controls application .While trying to install the application , after a certain period of processing time, I received a popup saying 'upa1 not found in unifier_bp' after which my install button got disabled and nothing was shown under Applications . However , I could see the company administrator was created and most of the BPs and workflows were also created . But I am not sure if everything got installed properly due to this popup received . PFA a document that has the screenshots for your reference .
Thanks,

"Table Name" in customizing SUS:"make field control settings for tables"?

Hi Gurus,
In the following customizing node, I can find the table name such as :
     ORDER.DET.EDIT
+     ORDER.DET.VIEW+
+     ORDER.HISTORY.DETAIL+
+     ORDER.ITEM.EDITH+
+     ORDER.ITEM.EDITL+
+     ORDER.ITEM.EDITL.WO.OR+
+     ORDER.ITEM.EDITM+
+     ORDER.ITEM.EDITM.WO.OR+
+     ORDER.ITEM.EDITS+
+     ORDER.ITEM.EDITS.WO.OR+
+     ORDER.ITEM.VIEWH+
+     ORDER.ITEM.VIEWL+
+     ORDER.ITEM.VIEWL.WO.OR+
+     ORDER.ITEM.VIEWM+
+     ORDER.ITEM.VIEWM.WO.OR+
+     ORDER.ITEM.VIEWS+
+     ORDER.ITEM.VIEWS.WO.OR+
+     ORDER.LIST+
+     ORDER.SDLN.EDIT+
+     ORDER.SDLN.VIEW+
It's difficult to know the difference for these so-called "table name"...
"SAP implementaion --> supplier relationship management --> supplier self-service --> settings for user interface --> make field control settings for tables"+
What's actual meaning for these table names? Where can I find related document and actual corresponding transparent tables for these so-called talbes?
Thanks and best regards
Jack

Hi Neelima,
Thanks a lot.
Checked the SAP note, but I could not find corresponding infomation about that, kindly please advise again.
Best regards
jack

Copy control settings for Multilevel variant configuration

Dear All,
I have the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
with reference to this quoatation a sales order is created.
My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
In copy control settings there is a field at item level called
configuration :
In this if I maintain value
A: The variant is getting copied but the values for subitems is not getting copied the values for main material is in changable mode.
B: The variant is getting copied but the values for subitems is not getting copied the values for main material are not in changable mode.
C:The variant is getting copied   the values for subitems is getting copied the values for main material are in changable mode but the values for subitems are not in changable mode.
My requiremnt is that
The variant must get copied
the values for subitems must get copied
the main material vlaues must be in changable mode
the subitems vlaues must be in changable mode
How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
Informative answers will be provided maximum points.
Deepak

Hai Deepak Mehmi,
please check in T CODE VTAA
In the position check
SalesDocType : Sales order type
SalesDocType : Inquiry type
Double clcik and check
DataT 051 General header data       Copying requirements 002 Header-diff.customer
DataT 101 Header business data
DataT 001 Partner header
And Tick mark for Copy Item Number
For further check:
In Item
                                  Copying requirements 301
DataT 151 General item data                                          Pos./neg. quantity   +
                                                           Copy quantity
DataT 102 Bus.data/item compl.                                     Pricing type         G
DataT 002 Partner item                       2 Update document flow   Cont. item copy mode
                                                    Copy product select.
FPLA 251 Conditions                Configuration
                                                           Campaign Deter.
Regards,
Mani

Copy control Settings from a Quotaion to Value contract/Quantity Contract

Hello Friends,
I would like to know whether it is possible to create a Value/Quantity contract in R3 with reference to a Quotation,Currently I am not able to see the copy control settings between quotation and Value/Quantity ,Also it help me a lot if you can provide me the copy control settings -Header and Item level
Thanks and Regards
Mohammed Roshan

if you run VTAA you would try to create a copy control as follows:
source: QT (quotation)
target: CQ (quantity contract)
say, take the existing record QT->AA (just an example) highlight it and hit 'Copy As'. Type 'CQ' in Target SalesDocTyp field.
hit Enter. Hit 'copy all'. (if you get a message regarding the "-" or "+" quantityt set this field blank (empty)
save it and test.
good luck!

VTFL copy control settings not visible

hi
i am facing some problem in copy control settings - vtfl - delivery to billing type copy control
when i am doing the required settings i.e copying ZLLZ delivery to ZFD billing type and saving the settings, a transport request is being generated and also it says tht data has been saved,but when i see the list i cannot see the new copy control tht i did.
i can see these entries in the table TVCPF. but these entries shows billing type ZFD n delivery type ZLLZ
along with additional entry in sales doc column as "ED"
i am not able to understand from where this entry is being picked...
an why i cant see the entries at VTFL
can anyone help.

Hi friend,
Please try to check you documents in transaction code VTFL by giving the Billing document (first) and the delivery document.
Definitely you can find the combination
And for your another question , In the table TVCPF you can see the sales document type ED which would have maintained in the VTAF copy controls from the Sales document to Billing documents
Please let me know if you have further queries.
santosh

Basic Difference: Copy Control Settings

Dear All,
I have got confused over Copy Control Settings b/w
VTFA & VTFL.
Please help me to understand the both (with differences).
Best Regards,
Amit.

Hi
VTFA is order to billing copy controls
that is in order's item category the billing relevence will be order related billing like cash sales , return order etc
Means your sales order is referrered for billing
VTFL is Delivety to billing copy controls
that is in your order's item category the billing relevence will be delivery related billing like standard order, rush sales etc
Means your delivery document is referred for billing
Hooe it calrifies
Regards
Raja
Edited by: ramanathan raja on Sep 15, 2008 4:33 PM

User Control Settings in Windows 7

I want to change the user control settings in Windows 7. I can move the control setting, but when I click OK, the change isn't implemented. It doesn't matter what user account I'm in.
Is this a simple fix?
Thank you.
Dan

Satellite L505D-S5983
Not a simple fix known to me, Dan.
Something like this occurs when you install Office 97 (KB978591). Maybe that fits? If not, try the "Fix it" anyway. It won't hurt anything.
-Jerry

Copy control settings needed for order related billing

hi,
sap gurus,
please provide the copy control settings related order related billilng and order related proforma invoice.
thanks in advance
regards,
balaji.t

Dear,
1 )Use TCODE -- VTFA and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
and maintain as suggested above.
At Header Level -- COPYING REQUIREMENT (001)
At ITEM Level-- COPYING REQUIREMENT (001)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
2) Use TCODE -- VTFA and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED PROFARMA BILLING in similar way u can maintain for ur Z Documents
At Header Level -- COPYING REQUIREMENT (007)
At ITEM Level-- COPYING REQUIREMENT (008)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
need further help revert back.
Regards
AJIT K SINGH
HAPPY TO HELP U

New Projects - Change Settings

I have purchased Premere Elements 9. I always take out the sd card and insert it into the camera to download the video to a file I created.
At this point I go to edit my video and the New Project - change settings box pops up. Not sure how to set this with the camera
I have - Canon SX1 IS in HD1080. Any help appreciated.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Project Control settings

Similar Messages

Maybe you are looking for