Project landscape and system landscape

hi all
what is thifference between system landscape and project landscape??
anil

Hi Anil,
System landscape:
They system landscape basically is the set-up or arrangement of your SAP servers. Ideally, in an SAP environment, a three-system landscape exists. A three-system landscape consists of the Development Server-DEV, Quality Assurance Server-QAS and the Production Server-PROD. This kind of set-up is not primarily designed to serve as server clusters in case of system failure, the objective to enhance "configuration pipeline management".
A Typical SAP Three-System Landscape.
At this juncture, it is important to state that a test system - Sandbox can also exit separately. The essence of the sandbox is to test the configuration of the business processes of a company, especially at the inception of the project (before the Business Blue Print is signed). It can also serve as a practice environment, even after go-live.
Pipeline is the environment where the configuration in the development system is moved to the quality assurance system and finally to the production system. The whole idea is to ensure that the configuration of these systems is in sync at any point in time. Suffice to say that, configuration/changes are first made in the Development system, thoroughly tested in the Quality Assurance system before been loaded into the production (Live) system.
This approach throws up the transport management system concept. Transport management system is the coordination of the movement of objects and configuration changes from the development system to the Quality Assurance system and then to the Production system. At times, this sequence of movement is not possible, especially in cases where an SAP note mandates that changes be made directly on the production system.
In such rare cases, objectively confirm that the change transport cannot be performed. Very likely, your system must have been configured to "not modifiable" (a system locking strategy that enforces the three-system landscape change transport rule); unlock the system by changing the global setting option to "modifiable" using transaction SE03. After you have done that, effect the change(s) on the system. Immediately lock the system back by changing the global setting option to "not modifiable" using transaction SE03. Replicate the changes on the other system. Note that transaction SCC4 can also be used to lock the system so that client dependent and independent configuration changes are not carried out directly on the production system.
By and large, the SAP system landscape ensures that the integrity of data is enhanced via enforcing a controlled configuration changes effect on the target system - production.
Project landscape:
It's about the kind of soultion customer would be implementation in his project. Like CRM, SCM, ERP.
Reward points if it helpful.
Thanks & Regards
Sasikanth.Ch

Similar Messages

Missing images in "all projects view" and System Pref- Desktop!

I was about selecting the image pick for my projects in the Aperture's all projects view to find out that some of my picture are missing.
I had verify that the image I was looking for is actually in my project and isn't rejected. I even perform a library rebuilt, but still a few of my pictures aren't showing up in this view. Anyone is also having this issue, know why or how I could fix this?
beside, I also have a similar issue of some pictures not showing up in the System Preferences under Desktop. All my Aperture's project are there, but not all pictures aren't showing up. By the way, the missing pictures there aren't the same as the ones not showing up in the "all projects view".

SeaBeast wrote:
I was about selecting the image pick for my projects in the Aperture's all projects view to find out that some of my picture are missing.
I had verify that the image I was looking for is actually in my project and isn't rejected. I even perform a library rebuilt, but still a few of my pictures aren't showing up in this view. Anyone is also having this issue, know why or how I could fix this?
The thumbnail you are scrubbing across with the mouse is only 156 pixels wide on the screen. If you have more than 156 images in the Project it'd be pretty complicated to show every single one. As far as I can see the All Projects view is there to give you a quick overview of the Project content, but isn't designed for 'detailed' browsing.
Find the image you want in it's Project, Right/Control-click and choose 'Make Key Photo'.
beside, I also have a similar issue of some pictures not showing up in the System Preferences under Desktop. All my Aperture's project are there, but not all pictures aren't showing up. By the way, the missing pictures there aren't the same as the ones not showing up in the "all projects view".
Only images that have had Previews generated will show up in other applications. Have you made sure that the Previews are up to date?
Ian

System Landscape and system alias

Dear All EP Expert,
I have some general questions.
1) If i wanted to connect my EP 7.0 to backend ECC 6. Is there any specific name that i must use for my system landscape and system alias?
2) Is the system lanscape come in when i include the business package?
3) Where can i download the latest ESS and MSS business package?
Can someone assist me on this?
Thanks you in advance...
Regards,
Bryan

Hi Brian ,
you cal also download latest ESS and MSS business packages from -->
download the business package from service market place.
Navigate through Downloads --> SAP Support Package --> Entry by Application group --> SAP Application Components --> SAP ERP --> SAP ERP2005 -->Entry Point by component -->SAP XSS Self - Service --> SAP ESS 600.
and similar for MSS 600 business package.
You cal also refer to this Note for further details about Self Services Business Packages.
[Note 1004528|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1004528]
Hope this helps.
And Regarding System Alias names, there is no such specific name you should keep, as no standard name exists , read more about it on.
[system aliases|http://help.sap.com/saphelp_nw70/helpdata/en/e9/9bc93f92908032e10000000a11405a/frameset.htm]
Also,
System Aliases and SAP Systems
For SAP systems (BW, CRM, and so on), it is recommended to use a system alias that has as its name parameter the logical system name as defined in the SAP system itself. The logical system is specified in Table T000 in the SAP system.
Reward points if helpful
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Jan 18, 2008 11:29 AM
Edited by: Shailesh Kumar Nagar on Jan 18, 2008 11:37 AM

Query on ChaRM control on BAU v/s Project landscapes

We have Business-as-Usual landscape(DEV, QAS, PRD) which is controlled by ChaRM (maintenance project). To this environment, we plan to add a project landscape with Dev(P) and QA(P) systems for project activities.
Can we use BAU Solution Manager - where ChaRM is configured - to control developments in project landscape and later cutover respective project transports to BAU landscape?
Thanks in advance,
Shaji

Hi Invycktus,
Thank you very much for your quick reply. I have seen the blog on retrofit functionality. The retrofit procedure assists in moving BAU changes to project landscape.
My query is on sort of "reverse retrofit" I mean, can I create an Implementation Project in BAU Solution Manager as follows?
Dev(Prj) --> QA(Prj) --> Test(Project) --> DEV --> QAS --> PRD
Please note, DEV --> QAS --> PRD is already controlled by a Maintenance Project for BAU support. Can the implementation project and maintenance project co-exist on same Solution Manager for same SIDs?
Thanks again,
Shaji

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?

IView and system admin objects appear changed or not registered when transported

Hi,
Recently we moved a few objects - iViews, pages and roles as epa and system admin objects as config archive and imported them manually to Test system. But when checked in the next landscape, the iView properties appear different. Eg. In Development system, the iView was unchecked for visibility option i.e. iView should not be visible. But when transported to test system, the property was checked and gave error. On reimporting, the same thing happened and we had to manually correct the property. This is not an expected behaviour and manual changes are not to happen after development changes.
Similarly, though config archive import showed the 2 new system objects in the respective location of Test system, the expected functionality was not working. I checked this by deleting one of them and manually creating the same entry and it worked fine. So I also had to delete the 2nd one and create a manual entry. The system admin objects we used pertained to System Configuration --> Content Mgmt--> Form Based Publishing --> Forms Availablity --> Folder Settings
We also moved kmcs and they are reflecting properly with correct folder permissions.
We don't understand why this is so occurring (iView and system admin entry appearing different or not getting registered )and never experienced such a case in previous projects. We don't want to face the issue going forward when transporting changes to staging and Prod systems.
Please assist as to what went wrong or any probable cause and solution for same.
Thanks,
Janani

Hi,
Has anyone faced such a situation before and know the reason for same ?
Regards,
Janani

SRM 5 BBPSTART - System ID and System Messages issues

Hi all,
We just upgraded to SRM 5.0 from SRM 3.0
The shopping cart logon page(bbpstart) doesn't show System ID and also the system Messages also doesn't work on browser when we set message by sm02.
I already checked "System ID" and "System messages" from "Select Display" under System Logon Settings from bbpstart>Error Pages>Logon Errors>Configuration>System Logon Settings.
I searched over the net and can't find anything. I only found a notes for the System messages, but it was for the older release and SRM 5 already applied that note. So I don't know what else I can do.
Thanks for the itime.
Kev

Hello Thomas,
It is not possible to run a system landscape with 2 identical SID's. And even if you do get it running in some kind of freeky way the system would be very instable (how would you know a transport has gone to the right system?).
A system copy and a <SID> change is still possible. However, SAP recommends to do an export and an import of your database. Allthough this is the best and the least confusing way (and labour extensive), it is not really necessary.
If you do a backup/restore procedure with a <SID> change, lets say from PRD to DEV, you will end up with a system that has DEV as <SID> but your tablespaces will look like PSAP-PRD-620. The owner of the database will also be sapprd. This is no problem at all to run the system, it is only confusing.
I know it works, I've got it running. I've also got a sandbox running with user saptsc and database owner cbdamd and <SID> CBD.
Kind regards,
Pascal Ottens

System and System Alias Creation

Hi all,
we have developed iViews in EP5. Now we want to migrate all our iViews to Ep6.. we have problem in EP6 for system and system alias creation..
in EP5 we have 2 files called System.xml for defining the system and JCODestination.xml..
after creating systems in System.xml.. we will define all system properties in like router string ,client no,and system number for each sap system in JCODestination.xml ..
and these systems we will map to the user in which will come all the defined Systems to combo box
and we will define the systems in default.properties file and we will use in the par development...
I heared that there are no System.xml and JCODestination.xml files in EP6 Netweaver Component....
can you please any one advise me how to get configured System and System Alias in EP6 NetWever... and how to call in coding...
I need a detailed steps how to create SAP System Alias.. since i am connecting to SAP System and Calling Function Modules and BAPIS From My Application(iViews).....
I need a Detailed Explaination Step by Step Explanation ..
your help will be required for me.. and appreciated to the great extent......
Thanks and Regards
Prasad.Y

After following the steps above in system landscape
please do the following to fill in the parameters
Select connector under the property category.
PlZ make sure that you have provided ApplicationHost(the host name of backend system), LogicalSystemName(can be found from transaction scc4,just dounle click on the client to see the logical name use saplogon and logon to the backend system R3 in this case) ,SAP Client(can be found from transaction code scc4), SAP SystenID,SAP System Number and Server port.
After that create a System Alias for that system by selecting System Aliases under display.( This is important. I had the same kind of problem this should slove it).
Now make sure that you have user mapping set for the backend R3 System(User Administration-->User Maping search for the user and choose edit. Then choose the system alias name form the drop down box and provide the login details for the backend system).
Try to test the connection by selecting connection tests under display. If it doesnot work plz copy paste the whole error message.
The message should look something like the one below
Test Connection with Connector - Jan 1, 1970 2:35:42 PM
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful
Let me know if you need any more details
- Sheshu

Software catolog and system catalog

Hi,
What is software catolog and system catalog ,diffrence between them?

Hi Satya,
>> Software Catalog:
The sotware catalog described the installed products and their constituent components. The software catalog is delivered with the content about all SAP products. Customers and parteners can extend this catalog with onformation about software from other vendors.
The SLD contains a Software Catalog of all installable SAP products and software components. The Software Catalog includes information about support packages and dependencies between the products and software components. This information is the basis for the description of the system landscape.
For More go through these links:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/frameset.htm</a>
>> System Catalog:
The system catalog describes the systems in the data center from two perspectives: a logical view (business systems) and a physical view (technical systems). In other words, the System Catalog describes the concrete implementation of the customer landscape.
For more check this link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a781e505211d189550000e829fbbd/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a781e505211d189550000e829fbbd/frameset.htm</a>
Information from the software catalog is used in IR to organize developments efforts. Information from the system catalog is used in the ID to drive the specific configuraion of Integration scenarios.
Hope this will resolve your concern.
Regards,
Subhasha Ranjan

How to block reusage of archived Project definition and WBS element numbers

Dear All,
We have archived our projects using the TC SARA and the Project definition and WBS elements numbers no more exist in tables PROJ and PRPS etc.. When I now try to create a new project, the system proposes the next open number or allows to enter a number which is the same as one of the archived projects. But in our organization we cannot reuse the Project definition and WBS element numbers (even if it is archived) as a rule.
Can anybody guide me what are the possibilities to block or avoid the reusage of the numbers of archived project definition and WBS elements in a fool-proof way?
Thanks and regards

One Workaround:
Use T code OPSJ and lock the project coding mask. Doing this you can not use this mask any more.
But you want to continue using the mask but with different numbers. Not sure how this can be acheived. lets wait for others view
Regards
Sreenivas

Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.

Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred

Settlement of Project Cost and revenue to GL

I am trying to Settle the project Cost and Revenue to GL account. For the same I have defined settlement profile maintaining GL as optional receiver and then I have maintained Source structure for cost and revenue as to separate them at the time of defining settlement rule, defined Allocation structure where in receiver against source, I have assigned GL as by cost element receiver. After that I have maintained settlement rule for WBS element, but when I am running a settlement is done to either of the GL for cost or Revenue which ever is defined first in settlement rule. It is not creating any settlement for second line item of the settlement rule and system is not giving any error message as well.
Where as if I am trying individually only for cost or revenue , settlement is completed with all the values but with any accounting document generated, but if I see the entries to that GL, a settlement entry is created for that transaction.
Can anyone please help in solving this issue ASAP.
Thanks and Regards

Hi,
    If it is posting to the first line means....
Follow the steps below:
First try to create a project and post the actuals and revenues.
Go to cost element report pick up those cost elements both for costs and revenues.
Go to Soruce Structure in the config, define the structure with name for Ex: 'Z1' and define two assignments, one is Costs and other Revenue, by selecting the costs go to Source mention the cost element where the actual costs are posted on (Mention only that cost element no other cost elements), next select the Revenue assignment and click on Source and mention the only cost element where the revenue wsa posted (Mention only that revenue cost element no other cost elements) and save the transaction.
Come back to project builder, select the wbs and click on settlement rule, in the menu goto-->settlement parameters and check whether the source and settlement profiles are correct or not, incase source structure is not available mention the same.
come back to settlement Rule overview and fill the fields as mentioned below:
1st line:   Category: GL
              GL Account: GL Account Number
              Source Structure: COSTS
2nd Line: Category: GL
              GL Account: GL Account Number (Revenue Account)
              Source Structure: REVENUE.
Now Run the Settlement for the specific period costs posted, the costs will be posted seperately to the two different GL Accounts.
I think this will resolve your problem.
Rgds
Sudhir Reddy

Validation for Project defination and project profile

Hello,
I have to create validation for Project Definition and Project Profile.User requirement is when the project (Exp: Z/0120) is creating with project profile Exp: Z0001_Z system should allow , If user is trying to select other than this profile system has to give the error.
I tried below validation but it is not working:
Prerequisite - PROJ-PSPID = 'Z'
Check - PROJ-PROFL = Z0001_Z
Kindly any suggest how can i give the validation for the same.
Regards,
Lakshmi.
Message was edited by: Mohamed Rafi - Many threads available on this topic search for those.

Hi,
Have you tried to save the project? Because validation rule will call at time of saving the Project.
I have created the same but for start with 'U'
When I create project and at time of saving, validation rule will call and system throw error if I don't create project start with 'U'.
Now If I am creating here, start with 'J'. System is throwing error as per validation rule.
Also Pl check if you have assigned same correct rule on project profile.
Regards
Shishir

System.out and System.err How to get to show up in log

Does anyone know if there is anyway to get System.out and System.err
messages to appear in the log?
Trying to build and debug a JSP project is a complete nightmare when the
remote developers cannot see System.out or System.err messages from helper
classes.
Platform= Windows NT 4.0
Weblogic running as a Service
Thanks in advance!

Write a wrapper class to redirect the std out to what ever stream you want.
HTH
Saman

What are PSI accesed teckets and system generated ticktes?

helllo friends,
i am srinu.
I have a doubt that what are PSI accessed tickets and system generated tickets.Plz let me know.
and also send me the doc about Bex browser and wad and navigation paths.
and some faqs for interviews.
My mail id is [email protected]
wiating for u r reply.
bye

hello Vasu ,
REGARDING PSI : In organizations where SAP R/3 is the standard ERP system, PSI allows project managers to benefit from PS8's power and flexibility, while continuing to disseminate project data through the SAP R/3 system. With PSI, project managers using both PS8 and SAP R/3 can now easily and accurately share information between the two systems. Essentially, PSI translates data from one application into the appropriate context in the other application, allowing both PS8 and SAP R/3 users to manage the same information in different ways. While the relationship between corresponding fields in PS8 and the Project System module of SAP R/3 is predefined, PSI allows you to easily customize the specific selection of data to be transferred between the applications.
REGARDING SYSTEM GENE.... iTS ALREADY BEEN DISCUSSED
list of some functional modules FOR CURRENCY TRANSL;ATYIO ARE
AIB5_GET_CURR_CONV_PARAMETERS
BAPI_CURRENCY_CONV_TO_EXTERNAL Conversion of Currency Amounts into External Data Format
BAPI_CURRENCY_CONV_TO_EXTERN_9 Conversion of Currency Amounts into External Data Format
BAPI_CURRENCY_CONV_TO_INTERNAL Conversion of Currency Amounts into Internal Data Format
BAPI_CURRENCY_CONV_TO_INTERN_9 Conversion of Currency Amounts into Internal Data Format
hOPE THIS HELPS YOU .
GOOD LUCK!

Project landscape and system landscape

Similar Messages

Maybe you are looking for