Project suddenly lost low end EQ HELP!!!

I've been working on a project all day which was beginning to sound great but I just noticed it seems to have lost all its low end frequency. All the drum beats sound tinny even in the browser! When I open a previous project it all sounds fine its just my current one... any ideas?
Cheers

Well - then it would be great if you shared what you did wrong (even if you think it was stupid).

Similar Messages

Suddenly lost wireless connection, bluetooth Help!

Yesterday my iMac stopped connection to my wireless internet. Nothing has been changed and the other laptops are still connected wirelessly. Now today I've even lost my bluetooth connection and now it won't even recognize when I hook it up via ethernet cable. What is going on? I was going to try to reinstall my basic software that came with my mac, but I can't even type in my password because my wireless keyboard isn't working because of the lack of bluetooth and I don't have a keyboard that will hook up to the back. Gosh I'm just about in tears.
TIA

So I take my iMac to the Apple store. Genuis looks at it and does an archive restore? Anyway...got my bluetooth back and it hooked up to the stores wireless fine and dandy. I'm blissfully happy...until I get home. Bluetooth works great again, but it still won't connect to my wireless network at home. I opened the network up (we live in the middle of nowhere) so there would be nothing hindering it and nothing, nada, zilch.

I've suddenly lost all Airport networks HELP!

G5 dual 2.5 APExtreme card that worked untill recently. The computer is hardwired to the Wireless router. It was an APExtreme base, but has been switched to a net gear. All of the other computers in the office, G5, and three powerbooks all "see" the new network on the netgear, however this one G5 no longer shows any networks when AP is on. Usually I can see at least two other nearby networks, but not now.
I've tried fsck, permissions, optimization, and can't figure this one out.
Any suggestions

Did you try turning Airport off then on again?
Is the Netgrear broadcasting the SSID?
Try resetting the SMU? http://docs.info.apple.com/article.html?artnum=300341

Hi, using iphoto 6, i suddenly lost albums: they are still in the directory, but no pictures in some albums.Using finder, I can locate the pictures and even get preview. But impossible to import them. Anyone can help? thanks

Hi, using iphoto 6, i suddenly lost albums: they are still in the directory, but no pictures in some albums.Using finder, I can locate the pictures and even get preview. But impossible to import them. Anyone can help? thanks

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Please help!! Ive suddenly lost my entire iPhoto library..says it doesn't exist although I can see the photos all in grey-but also the menu is in grey, can't do anything

Please can anyone help! Ive suddenly lost my entire iPhoto library while I wss cleaning up…sometimes I can find them, they're there but all in grey and so is the menu for iPhoto…so I can't open or do anything…

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

My project has lost the audio track. I imported tracks from iTunes, they are in the project but do not play, please help?

Hi...my movie project has lost the audio track. I can see it but nothing plays.
The movie record has its audio but the imported iTunes track is silent.

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

Suddenly lost ability to connect on FaceTime? help?

Why would I have suddenly lost ability to connect on facebook?

Apple is having problems with os6 update. The system has crashed a couple of times, and they are working on the problem.

On start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My iPad has suddenly lost my camera and FaceTime apps. I've tried to go into the restrictions however it is asking for passcode I never set up. Then I've tried to do a reset but it to is asking for a passcode that I never set up.

MY iPad has suddenly lost my camera and FaceTime apps. Yes I've tried to modify in the restrictions however it is asking for a passcode that I never set up. I've also tried to go and reset my iPad but it to is asking for a passcode. Yes I've tried any passcode I've ever used. And I can't get anywhere. Help!

iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Follow the section for recovery mode restore.

HT204053 I suddenly lost all my events from some time in September backwards on my Ipad?.

I suddenly lost all my events from end September backwards. How can I reset Icloud to retain all my events?.

Go to Settings>Mail,Contacts,Calendars...scroll down to the Calendars section and tap Sync, and set this to a longer time period.

Suddenly lost connection to my wifi and my phone can't find it again?

I was just using my iphone 4s normally and it suddenly lost connection to my home's wifi. I have been trying for hours, reset the wifi modem and turned it on and off, put my phone through recovery mode- the whole lot. Please help!!!

Howdy whitneyavon,
It sounds like you are unable to either connect to, or see your home Wi-Fi network. I would first, update your router, then reset your network settings. Assuming you restored from a backup, my thought is that the backed up network settings may need to be refreshed:
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thank you for using Apple Support Communities.
Regards,
Sterling

Test program running taking much more time on high end server T5440 than low end server T5220

Hi all,
I have written the following program and run on both T5440 [1.4 GHz, 95 GB RAM, 32 cores(s), 256 logical (virtual) processor(s),] and T5220 [(UltraSPARC-T2 (chipid 0, clock 1165 MH) , 8GB RAM, 1 core, 8 virtual processors )] on same OS version. I found that T5540 server takes more time than T5220. Please find below the details.
test1.cpp
#include <iostream>
#include <pthread.h>
using namespace std;
#define NUM_OF_THREADS 20
struct ABCDEF {
char A[1024];
char B[1024];
void *start_func(void *)
    long long i = 6000;
    while(i--)
                ABCDEF*             sdf = new ABCDEF;
                delete sdf;
                sdf = NULL;
    return NULL;
int main(int argc, char* argv[])
    pthread_t tid[50];
    for(int i=0; i<NUM_OF_THREADS; i++)
                pthread_create(&tid[i], NULL, start_func, NULL);
                cout<<"Creating thread " << i <<endl;
    for(int i=0; i<NUM_OF_THREADS; i++)
                pthread_join(tid[i], NULL);
                cout<<"Waiting for thread " << i <<endl;
After executing the above program on T5440 takes :
real 0.78
user 3.94s
sys 0.05
After executing the above program on T5220 takes :
real 0.23
user 1.43s
sys 0.03
It seems that T5440 which is high end server takes almost 3 times more time than T5220 which is low end server.
However, I have one more observation. I tried the following program :
test2.cpp
#include <iostream>
#include <pthread.h>
using namespace std;
#define NUM_OF_THREADS 20
struct ABCDEF {
char A[1024];
char B[1024];
int main(int argc, char* argv[])
    long long i = 6000000;
    while(i--)
        ABCDEF* sdf = new ABCDEF;
        delete sdf;
        sdf = NULL;
    return 0;
It seems that T5440 server is fast in this case as compaired to T5220 server.
Could anyone please help me out the exact reason for this behaviour as my application is slow as well on this T5440 server. I have posted earlier as well for the same issue.
Thanks in advance !!!
regards,
Sanjay

You already asked this question...
48 hours earlier, and in the same Solaris forum space
Repeating the post isn't going to get you a response any faster, and actually now have people NOT respond because you are not showing any patience.
These are end-user community forums, not a place to expect Oracle Technical Support.   There is no obligation that there be a response.
If you have a business-critical issue and hope to get accurate and timely response, then use your service contract credentials to open a Support request.
This new redundant post is locked.
Edit:
It appears that at the same time the O.P. posted this redundant thread, they also posted the same question to at least one other forum web site:
http://www.unix.com/solaris/229269-test-program-running-taking-much-more-time-high-end-server-t5440-than-low-end-server-t5220.html

Introducing Lowarch - Arch for low-end systems

Some of you might remember that I mentioned my plans of making an Arch install cd for low end systems. I've come quite far with this project now.
First, I must say that it was a lot harder than I first expected. So I can say I have learned a lot in the process.
Second, before I start ramblig about where I am in the process, I'll just outline what the plan is:
The best Linux distribution is Arch Linux, because of it's speed, simplicity and elegance in design. I often get hold of some old laptops which are too old for Arch (i586 normally, but also i486). I have tried a lot of distros made for low end systems, but I always end up thinking, ah how wonderful it would have been to have Arch on this. It would have been the perfect distro for this machine.
And the more I thought about it, I realised that even though Arch is perfect for super modern systems, it would be even more perfect for old systems, because of it's speed and simplicity, and not least the choice of packages.
Some have started projects to port Arch to i586. I don't think that is the best solution. A lot of Arch isn't really useful on these machines. Therefore I decided to make a new distro based on Arch, where the main difference is the choice of packages. You don't want to run a video editor on a i586. For now I've called the distro Lowarch.
Here's what I have done so far:
1st try:
Oh, I just change the compiler flags to i486 in /etc/makepkg.conf and start compiling all the packages. That worked great. Almost everything in base compiled fine. Until I started to notice the strange i686's coming up in all the ./configure outputs, and when I tried to install some of it on my i586, a lot of Illegal instruction messages came up.
After doing some research, I understood that some programs make static links to libraries, all of which, of course, are i686 coded on my system. I realised I needed to do this differently. Of course I didn't want to do all the compiling on a 486 machine.
2nd try:
I made a Cross Linux From Scratch system, compiled for i486. Even that I had to make twice, for a lot of programs check what processor they are running on and compile for that. So the second time I used a so-called uname-hack. A small kernel module which makes the kernel report that it's running on an i486 machine.
When I had a basic build system, I compiled pacman, and started to build packages. This time I had to take care of the order for dependencies to work out. First kernel-headers, glibc, etc. I installed one package at a time into an empty directory with the pacman -r option.
After having the base system compiled, I booted it, and (using the uname-hack still) continued to compile the other packages in current, and the ones that I wanted from extra.
It was really hard, since a lot of packages just don't compile with recent glibc and gcc. I have learned a lot about writing small patches just to make gcc happy or take away symbols not used anymore etc. The dependencies in the pkgbuilds are not always correct when it comes to building packages. Sometimes, and this is the most frustrating, packages seems to build correctly, but because some library wasn't installed or whatever, a few files are missing from the package, and I have no way to know, untill something goes wrong. Often this wrong is a package not compiling because include files are missing.
Another problem was to make an installer. I decided I just wanted a simple installer, like Arch has. So I compiled busybox and made an almost exact copy of the 0.7.2 install cd, just compiled for i486, and with my package selection on it.
What's left to do:
1. Look more closely at the package selection. If there are people who are interested in this we can have some nice discussions about this. There are a lot of packages I just don't know what is for, and therefore I don't dare take them away.
2. Clean up the PKGBUILDs, e.g take away references it the i686 and 64bit arch.
3. Compile the whole set of packages again, just in case.
4. Releasing it.
I've set up a wordpress page at lowarch.linuxophic.org, which is empty now, but where I'll put out a link to the iso when it's ready.

Yes, I think it would be smart to check out the PKGBUILD once in a while and see if they are still able to build packages. It seems this is only done when new releases arrive.
The thing about old programs not compiling with newer glibc and gcc or other libraries is unavoidable, and there's an unending stream of patches to address this issue. If a package hasn't had a release for a year, it's quite common that a change in a library it depends on will break the compilation. When or if new releases come, they should usually fix this.
Of course, PKGBUILDs of current packages should work with a current system, not with a system from last year, if their supposed to be of any use. But it's a huge job to keep this up to date at all times, and you need some programming skills to do it, and I would rather have the devs focus on more important things, like updating packages and making everything work even better.

Premiere pro project suddenly degraded

My 50-minute Premiere Pro project suddenly degraded between work sessions. It contains mixed footage - mov files the smallest and the sequence settings match that - and dv footage.
It looked perfect, but when it was opened to resume work on another day them image quality had degraded badly. When rendered It plays ok but is degraded in pause. Color correction is now impossible.
I hope you can help.

For starters, you can't perform a proper color correction using the built in monitors. They are not designed to show you an accurate image, as you're now discovering. You MUST get the signal off the computer and onto a properly calibrated TV. This will ensure you're seeing the signal accurately, which is the first step in color correction. Trying to remove too much red that was put there by an inaccurate display is an exercise in futility.
Having said that, click the wrench under the Program Monitor and make sure Playback Resolution is set to full.

Yesterday while on WiFi at an international airport, I suddenly lost content in Safari and a window popped up that suggested that someone was trying to spoof setup.iCloud. Do I need to be concerned about malware or other residual problems.

Yesterday while on WiFi at an international airport, I suddenly lost content in Safari. A window popup suggested that someone was trying to spoof setup.iCloud. After arriving home to my own network, Safari still was acting strange. Do I need to be concerned with possible malware or other destructive software remaining on my iPad?

Hi massmercury,
I want to apologize for your experience here with the service center. I am moving forward to have your case escalated for further review. Please see my private message. I will be your point of contact until our Customer Advocate team reaches out to you.
Best regards,
Bgriffin2
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Project suddenly lost low end EQ HELP!!!

Similar Messages

Maybe you are looking for