Project Version Tables for Dates
Hi,
I have to develop a report to compare the Planned vs actual dates of WBs and Activity, for which i am using the Project Version.
But not able to get the Table and fields where Project Version Data is stored,
pls hepl to find that.
B P Singh wrote:
Hi,
> Use the link Project version table which stores the plan and actual cost/Revenue
Given Link is for Plan Vs Actual cost from the Costing Version,
I am looking the Plan Vs Actual Basci Dates , Earliest Dates and forecast Dates..
Similar Messages
-
Table for dates in date-type in transaction
Hi,
Can anybody tell me the table inwhich the dates saved in the different date-types ( which are part of date-profile) are stored for the transaction type.
This date profile is assigned to transaction type( LEAD).
thanks and regards,
PDHi Prashant,
Use Table: BAD_APPOINTMENT
Field: ORDERADM_H_GUID contains guid of Lead transaction obtained from table CRMD_ORDERADM_H.
Field: APPT_TYPE contains information for Data Types.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
Designing metadataLogging table for data warehouse
Hi:
I am in the process of creating metadataLogging tables for dw.
I have thought 5 tables to track errors and check etl execution.
Master table for all major jobs. Enviournment - oracle 9i. Dw size not more than 30 mb. to start with.
CREATE TABLE ADMIN_JOB_MASTER_TBL
JOBNUMBER NUMBER,
JOBNAME VARCHAR2(768 BYTE),
MINTHRESHRECORDS NUMBER,
MAXTHRESHRECORDS NUMBER,
MINTHRESHTIME VARCHAR2(64 BYTE),
MAXTHRESHTIME VARCHAR2(64 BYTE),
CREATEDATE DATE
Audit Table for auditing jobs.
CREATE TABLE ADMIN_AUDIT_JOBS_TBL
JOBNUMBER NUMBER,
JOBNAME VARCHAR2(768 BYTE),
STARTDATE DATE,
ENDDATE DATE,
NUMBERRECORDS NUMBER,
FAIL_OR_SUCCESS VARCHAR2(64 BYTE)
Step Master: for jobs involving various steps, logic such as branching, loop, flow etc. breaking the job_master to a lower level for a more insight.
audit_step
CREATE TABLE ADMIN_AUDIT_STEP_TBL
RECORDID VARCHAR2(256 BYTE),
JOBAUDITID VARCHAR2(256 BYTE),
STEPNUMBER NUMBER,
PARAMETERS VARCHAR2(512 BYTE),
NUMBERRECORDS NUMBER,
STARTDATE DATE,
ENDDATE DATE,
USERNAME VARCHAR2(256 BYTE)
Error_table: to track error during execution.
CREATE TABLE ERROR_TBL
ERROR_NO NUMBER,
TABLE_NAME VARCHAR2(124 BYTE),
ERR_NUM NUMBER,
ERR_MSG VARCHAR2(124 BYTE),
ERROR_TIME DATE
I am thinking to load the master tables manually with expected values.
And during each run, loading the auditing tables.
Error table would ofcourse be loaded during the run.
So everytime a threshold has changed, I would have to update master table manually. I dont mind doing that initially.
Would the following tables and the stated appraoch be good for etl.
Please guys, let me know your thoughts. Suggest changes or tables or approach, if you feel, that its wrong.
Thanks in advance. All inputs are highly appreciated !!!
Regards
SomHi,
What better than Oracle suggests...is there ????
Have you read Oracle doc titled...
"Data Warehousing Guide" and the "Handling Data Errors with an Error Logging Table " section for example...
Regards,
Simon -
Table for Data source and Transfer rule mapping
Hi all,
Do we have any table where in we can know the different transfer rules(for different source systems) assigned to the same Data source.
thanks and regards,
Rk.thank you all,
the table RSDS does not have 3.x data sources, it has only 7.0 Data sources also it does not have the field mapping.
RSOSFIELDMAP and RSTSRULES have the field mapping of the datasources, do we have any similiar tables for 7.0 Datasources.
regards,
RK -
Error Creating Entries in EDISEGMENT Table for Data Src 0MATL_TYPE_TEXT
Hello,
We are facing issues for data sources after doing a client switch in Quality - BW system. 0MATL_TYPE_TEXT is one of the Data Sources which is throwing such an error. I tried to delete entries from EDISEGMENT table in BW system. But this one being system tables without table maintenance, can't delete the entries for relevant datasources with Basis help (after opening the system for editing) as well. Can you suggest proper steps how we can delete entries from this table?
Also, do we need to delete entries from EDISEGMENT tables in ECC as well for the data source? Is there any other table from which we should be deleting entries also and is there any risk associated with such deletion of table entries in BW/ ECC?
If you have any other way of resolving this issue, please suggest.
Regards,
DibyenduHi,
This is a standard table, so deleting entry from it is not advisable. You can any ways try correcting it.
Check out note 493422. This may help.
Regards,
Shyam. -
Hi all,
Can anyone tell the table and field for date of manufature in production order confirmation screen....
Regards,
JosephHi,
AFKO - this is for your basic production header info - order number, basic finish date etc
S022 - this is for your operation header details - operation number, Work centre etc if you are only after the header details such as setup time and execution time, you can probably stop here without going to AFVC or AUFV.
AFRU - BUDAT - Posting date
Regards,
AlokTiwari
Edited by: Alok Kumar Tiwari on Dec 22, 2011 2:05 PM -
R/3 tables for data sources
can anyone tell me r/3 tables for plant maintenance data sources
0PM_DISMANTLE
0PM_MEASUREMENT
0PM_OM_OPA_1
0PM_OM_OPA_2
0PM_OM_OPA_3
0PM_PRM_PLCS_1
2LIS_17_ACTY
2LIS_17_CAUSE
2LIS_17_ITEM
2LIS_17_NOTIF
2LIS_17_OPERATION
2LIS_17_ORDER
2LIS_17_TASK
2LIS_18_ACTY
2LIS_18_CAUSE
2LIS_18_ITEM
2LIS_18_NOTIF
2LIS_18_OPERATION
2LIS_18_ORDER
2LIS_18_TASK
2LIS_05_ACTY
2LIS_05_CAUSE
2LIS_05_ITEM
2LIS_05_NOTIF
2LIS_05_OPERATION
2LIS_05_ORDER
2LIS_05_TASK
i am not able to find the r/3 tables?
please suggest me
i will assign pointsHi Vishal,
Please see the below link.
http://help.sap.com/saphelp_nw04/helpdata/en/f6/7a0c3c40787431e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c1/840c3c40787431e10000000a114084/frameset.htm
Click on Datasources. There u can find some tables and fields u want.
Assign points if it helps...
Regards,
ARK
null -
Project system tables for getting baseline and forecast values
Hi all,
I am new to Project systems and currently i am having the PS report.
I need to pick the following values based on project definition (proj-pspid):
--> historical baseline values like:
1) versions
2) created by
3) created on
--> historical forecast values like:
1) versions
2) created by
3) created on
Can you please let me know the tables and fileds for fetching the above values.
Regards,
raviraj.Hi,
IMAK Appropriation requests - general data
IMAV Appropriation request variant
IMPR Investment Program Positions
IMPU Texts for cap. inv. program positions
IMTP Investment programs
IMZO Assignment Table- CO Object - Capital Investment Prog.Pos.
PMCO Cost structure of maintenance order
PRHI Work Breakdown Structure, Edges (Hierarchy Pointer)
PROJ Project definition
PRPS WBS (Work Breakdown Structure) Element Master Data
Check with tables -
How to make join bsis,bkpf,bseg table with zdbb and zobb table for data retrieval
HI,
I have an abap development requirement in which i have to retrieve data fields from different table, like bsis ,bkpf, bsip, bsas, pyar, lfa1,skat,etc.
I have retrieved data from bsis and bkpf and bseg by finding common field like "belnr, budat bukrs gjahr" to through FOR ALL ENTERIES, but when I going to get relevant data from zdbb table which is orginated bank details table ,in this I haven't find any common field on the basis of which i retrieve relevant data,
please guide me in in this regard as I have already searched web for this solution but haven't find a satisfactory answer.
Thanks.Hi Ruks Pathirage
THANKS FOR YOUR REPLY.
I have checked both of the tables i.e lfbk and zdbb but haven't find any common field, coz data element is different,
please see the snap shots.
lfbk table:
and zdbb,
In my understading there is no com'n field , though bank key is common field in both table but both have different data element.
thanks -
When I save a project plan to my local computer from Project Online and open it up in an offline mode and access Resource Usage view I get prompted with Date Range dialog boxes with the first one saying "Show resources/assignments that start or finish
after:" and the second one with "And before:".
I don't have any filters that are setup in Project Online that are not available in offline mode to trigger these prompts.
Please let me know what could be causing the date range prompts. Thanks.Hi,
You probably retrieve an enterprise filter into your local file. Just open the organizer from MS Project, go to the filter tab (be sure to have your project selected in the drop down menu at the top left of right of the organizer) and delete the date range
filter.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Oracle Table for 'Date Effectivity To' field in Bill Of Materials Screen
Hi Apps Gurus,
In Oracle EBS Bill Of Materials Screen under the tab Date Effectivity, there is column: 'To' which indicates the end date upto which the BOM is active.
I want to know the base table in which this Date Effectivity To field is located in , i tried help--> diagonostics but this particular field is not present in the view given.
Almost all fields at BOM component level are present in bom_inventory_components table except this effective date to field.
Please advice as to in which table is this field present.
Thanks,
RGHi RG,
These both fields EFFECTIVITY_DATE & DISABLE_DATE are available in base table : BOM_COMPONENTS_B
SELECT EFFECTIVITY_DATE, DISABLE_DATE FROM BOM_COMPONENTS_B WHERE BILL_SEQUENCE_ID = :p_bill_seq_id
HTH
Sanjay -
Table Name for Date Profile & SLA
Hi,
What is the table name for Data Profile / Date Type etc and also for SLA tables?
Rgds,
VR.Hi
here are the table for date profile, service profile and response profiles.
1. Date profile:- CRMC_DATES_PRF
2. Service profile:- crmd_serwi
3. Response profile :-crmd_escal
Regards
Naresh -
PS - Project Version Reporting
Hi Dear,
For project verson wise reporting i need to get Amount (Plan and actual cost , revenue) and Quantity (Plan work and actual work --durations).
I have done the development by pulling amont from RPSCO and Quantity from RPSQT by giving the OBJNR which iam getting from MASTER TABLES.
I got the right amount values i need for defining COST and REVENUES.
<b>
But the problem is with the RPSQT. all the quantity values have got the units as ' % '. So, i feal that this is not the right table to define Plan and Actual WORK (Duration) and the units hould be like Hours or Each....etc.
Can some one pls suggest me as which R/3 table will provide me the Quantity values by Project version wise for defining DURATION/WORK (plan and actuals)</b>
Your valuable inputs will be appreciated.
Thanks Dear...Hi Leo,
On BCT I found data sources for "cProject" that can handle versions but none for PS. Have you solved your request and if so how you managed it? I've got the same request concerning 0PS_C02 and 0PS_C04.
Best Regards,
Volker -
Tables for DTP and Infopackage
Hi ,
My requirement is we need to write a custom ABAP Program to view properties and various tabs, details in the tab etc for DTP and Info package. So we need the list of tables or any sources from where the data is fetched for the each of details in DTP and Info packages.
For example: Will get the Infopackage Data Selection details from table 'RSLDPSEL'. Like this we need table for each settings in Infopackage and DTP.
Regards,
Lavanya.HI,
Infopackage related table:-
RSLDPIO- Links datasource to infopackages
RSLDPIOT-infoPackage Text Description
RSLDPRULE-ABAP source code for InfoPackages
RSLDPSEL -Hardcoded selections in InfoPackages
RSMONICDP-Contains the request-id number by data target
RSPAKPOS-List of InfoPackage Groups / InfoPackages
DTP Related Tables:-
RSBKDTP BW: Data Transfer Process Header Data
RSBKDTPH DTP: Historic Versions
RSBKDTPSTAT Status Information on Data Transfer Process
RSBKDTPT Texts on Data Transfer Processes
RSBKDTPTH Texts on Data Transfer Processes
RSDDSTATDTP Table for WHM Statistics. Details DTP
RSOACUBE_DTP BW: OLTP Direct Access: Directory of Assigned Remote DTPs
RSBKDATAPAKSEL DTP: Data Package Selections
RSBKSELECT Selections for DTP Request (Summary)
RSBKREQUEST DTP Request
RSBKREQUEST_V View of DTP Request
RSBKBP Breakpoints
RSBKDATAINFO Information on DTP Runtime Buffers
RSBKDATAPAKID DTP: Status Table for Data Packages
RSBKSUBSTEP Properties of Substeps in a DTP -
Select-options for date field.
Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS WDR_SELECT_OPTIONS
SELECT_OPTIONS WDR_SELECT_OPTIONS INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
lt_range_table TYPE REF TO DATA.
data:
lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
EXPORTING
I_TYPENAME = 'DATS'
RECEIVING
RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
EXPORTING
I_ID = '<name of date attribute in the context>'
* I_WITHIN_BLOCK = MC_ID_MAIN_BLOCK
* I_DESCRIPTION =
* I_IS_AUTO_DESCRIPTION = ABAP_TRUE
IT_RESULT = lt_range_table
* I_OBLIGATORY = ABAP_FALSE
* I_COMPLEX_RESTRICTIONS =
* I_USE_COMPLEX_RESTRICTION = ABAP_FALSE
* I_NO_COMPLEX_RESTRICTIONS = ABAP_FALSE
* I_VALUE_HELP_TYPE = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
* I_VALUE_HELP_ID =
* I_VALUE_HELP_MODE =
* I_VALUE_HELP_STRUCTURE =
* I_VALUE_HELP_STRUCTURE_FIELD =
* I_HELP_REQUEST_HANDLER =
* I_LOWER_CASE =
* I_MEMORY_ID =
* I_NO_EXTENSION = ABAP_FALSE
* I_NO_INTERVALS = ABAP_FALSE
* I_AS_CHECKBOX = ABAP_FALSE
* I_AS_DROPDOWN = ABAP_FALSE
* IT_VALUE_SET =
* I_READ_ONLY = ABAP_FALSE
* I_DONT_CARE_VALUE =
* I_EXPLANATION =
I_TOOLTIP = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
lt_date type REF TO DATA.
FIELD-SYMBOLS:
<fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
EXPORTING
I_ID = '<attrib_name>'
RECEIVING
RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.
Maybe you are looking for
-
Link to BI Publisher report with parameters
I want to link from one BIP report to another. I have created a BI Publisher report using the Layout Editor. Using the following link, I can connect to the BIP report when directly pasted into the address bar in firefox. http://xxxxxxxxx/xmlpserver/S
-
I think my phone is dead?!
On a normal day my battery will last me all day, run down to about 30-20%, and then I'll charge it up at night. Yesterday I noticed my battery life was down to like 50% at about 1:30pm, which is unusual for my phone considering it was idle while I wa
-
IView displays junk characters in Page preview screen
hi I am facing an unknown problem in Business Package(Production Analysis) for EP5.0, which i imported to EP6.0. The IView which i am using is a trasaction iview. Earlier it was WebGUI, i changed it to WinGUI, and i did changes anything required. The
-
The January upgrade ad wont go away for my iPod touch. Ive tried the "No Thanks" "Purchase" and "Remind me Later" All cause this error: The iTunes store could not process your request, please try again later. I am always connected to internet, and Iv
-
just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks