Table for date of manufature

Hi all,
Can anyone tell the table and field for date of manufature in production order confirmation screen....
Regards,
Joseph

Hi,
AFKO - this is for your basic production header info - order number, basic finish date etc
S022 - this is for your operation header details - operation number, Work centre etc if you are only after the header details such as setup time and execution time, you can probably stop here without going to AFVC or AUFV.
AFRU - BUDAT - Posting date
Regards,
AlokTiwari
Edited by: Alok Kumar Tiwari on Dec 22, 2011 2:05 PM

Similar Messages

Table for dates in date-type in transaction

Hi,
Can anybody tell me the table inwhich the dates saved in the different date-types ( which are part of date-profile) are stored for the transaction type.
This date profile is assigned to transaction type( LEAD).
thanks and regards,
PD

Hi Prashant,
Use Table: BAD_APPOINTMENT
Field: ORDERADM_H_GUID contains guid of Lead transaction obtained from table CRMD_ORDERADM_H.
Field: APPT_TYPE contains information for Data Types.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Designing metadataLogging table for data warehouse

Hi:
I am in the process of creating metadataLogging tables for dw.
I have thought 5 tables to track errors and check etl execution.
Master table for all major jobs. Enviournment - oracle 9i. Dw size not more than 30 mb. to start with.
CREATE TABLE ADMIN_JOB_MASTER_TBL
JOBNUMBER NUMBER,
JOBNAME VARCHAR2(768 BYTE),
MINTHRESHRECORDS NUMBER,
MAXTHRESHRECORDS NUMBER,
MINTHRESHTIME VARCHAR2(64 BYTE),
MAXTHRESHTIME VARCHAR2(64 BYTE),
CREATEDATE DATE
Audit Table for auditing jobs.
CREATE TABLE ADMIN_AUDIT_JOBS_TBL
JOBNUMBER NUMBER,
JOBNAME VARCHAR2(768 BYTE),
STARTDATE DATE,
ENDDATE DATE,
NUMBERRECORDS NUMBER,
FAIL_OR_SUCCESS VARCHAR2(64 BYTE)
Step Master: for jobs involving various steps, logic such as branching, loop, flow etc. breaking the job_master to a lower level for a more insight.
audit_step
CREATE TABLE ADMIN_AUDIT_STEP_TBL
RECORDID VARCHAR2(256 BYTE),
JOBAUDITID VARCHAR2(256 BYTE),
STEPNUMBER NUMBER,
PARAMETERS VARCHAR2(512 BYTE),
NUMBERRECORDS NUMBER,
STARTDATE DATE,
ENDDATE DATE,
USERNAME VARCHAR2(256 BYTE)
Error_table: to track error during execution.
CREATE TABLE ERROR_TBL
ERROR_NO NUMBER,
TABLE_NAME VARCHAR2(124 BYTE),
ERR_NUM NUMBER,
ERR_MSG VARCHAR2(124 BYTE),
ERROR_TIME DATE
I am thinking to load the master tables manually with expected values.
And during each run, loading the auditing tables.
Error table would ofcourse be loaded during the run.
So everytime a threshold has changed, I would have to update master table manually. I dont mind doing that initially.
Would the following tables and the stated appraoch be good for etl.
Please guys, let me know your thoughts. Suggest changes or tables or approach, if you feel, that its wrong.
Thanks in advance. All inputs are highly appreciated !!!
Regards
Som

Hi,
What better than Oracle suggests...is there ????
Have you read Oracle doc titled...
"Data Warehousing Guide" and the "Handling Data Errors with an Error Logging Table " section for example...
Regards,
Simon

Table for Data source and Transfer rule mapping

Hi all,
Do we have any table where in we can know the different transfer rules(for different source systems) assigned to the same Data source.
thanks and regards,
Rk.

thank you all,
the table RSDS does not have 3.x data sources, it has only 7.0 Data sources also it does not have the field mapping.
RSOSFIELDMAP and RSTSRULES have the field mapping of the datasources, do we have any similiar tables for 7.0 Datasources.
regards,
RK

Error Creating Entries in EDISEGMENT Table for Data Src 0MATL_TYPE_TEXT

Hello,
We are facing issues for data sources after doing a client switch in Quality - BW system. 0MATL_TYPE_TEXT is one of the Data Sources which is throwing such an error. I tried to delete entries from EDISEGMENT table in BW system. But this one being system tables without table maintenance, can't delete the entries for relevant datasources with Basis help (after opening the system for editing) as well. Can you suggest proper steps how we can delete entries from this table?
Also, do we need to delete entries from EDISEGMENT tables in ECC as well for the data source? Is there any other table from which we should be deleting entries also and is there any risk associated with such deletion of table entries in BW/ ECC?
If you have any other way of resolving this issue, please suggest.
Regards,
Dibyendu

Hi,
This is a standard table, so deleting entry from it is not advisable. You can any ways try correcting it.
Check out note 493422. This may help.
Regards,
Shyam.

R/3 tables for data sources

can anyone tell me r/3 tables for plant maintenance data sources
0PM_DISMANTLE
0PM_MEASUREMENT
0PM_OM_OPA_1
0PM_OM_OPA_2
0PM_OM_OPA_3
0PM_PRM_PLCS_1
2LIS_17_ACTY
2LIS_17_CAUSE
2LIS_17_ITEM
2LIS_17_NOTIF
2LIS_17_OPERATION
2LIS_17_ORDER
2LIS_17_TASK
2LIS_18_ACTY
2LIS_18_CAUSE
2LIS_18_ITEM
2LIS_18_NOTIF
2LIS_18_OPERATION
2LIS_18_ORDER
2LIS_18_TASK
2LIS_05_ACTY
2LIS_05_CAUSE
2LIS_05_ITEM
2LIS_05_NOTIF
2LIS_05_OPERATION
2LIS_05_ORDER
2LIS_05_TASK
i am not able to find the r/3 tables?
please suggest me
i will assign points

Hi Vishal,
Please see the below link.
http://help.sap.com/saphelp_nw04/helpdata/en/f6/7a0c3c40787431e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c1/840c3c40787431e10000000a114084/frameset.htm
Click on Datasources. There u can find some tables and fields u want.
Assign points if it helps...
Regards,
ARK
null

How to make join bsis,bkpf,bseg table with zdbb and zobb table for data retrieval

HI,
I have an abap development requirement in which i have to retrieve data fields from different table, like bsis ,bkpf, bsip, bsas, pyar, lfa1,skat,etc.
I have retrieved data from bsis and bkpf and bseg by finding common field like "belnr, budat bukrs gjahr" to through FOR ALL ENTERIES, but when I going to get relevant data from zdbb table which is orginated bank details table ,in this I haven't find any common field on the basis of which i retrieve relevant data,
please guide me in in this regard as I have already searched web for this solution but haven't find a satisfactory answer.
Thanks.

Hi Ruks Pathirage
THANKS FOR YOUR REPLY.
I have checked both of the tables i.e lfbk and zdbb but haven't find any common field, coz data element is different,
please see the snap shots.
lfbk table:
and zdbb,
In my understading there is no com'n field , though bank key is common field in both table but both have different data element.
thanks

Project Version Tables for Dates

Hi,
I have to develop a report to compare the Planned vs actual dates of WBs and Activity, for which i am using the Project Version.
But not able to get the Table and fields where Project Version Data is stored,
pls hepl to find that.

B P Singh wrote:
Hi,
> Use the link Project version table which stores the plan and actual cost/Revenue
Given Link is for Plan Vs Actual cost from the Costing Version,
I am looking the Plan Vs Actual Basci Dates , Earliest Dates and forecast Dates..

Oracle Table for 'Date Effectivity To' field in Bill Of Materials Screen

Hi Apps Gurus,
In Oracle EBS Bill Of Materials Screen under the tab Date Effectivity, there is column: 'To' which indicates the end date upto which the BOM is active.
I want to know the base table in which this Date Effectivity To field is located in , i tried help--> diagonostics but this particular field is not present in the view given.
Almost all fields at BOM component level are present in bom_inventory_components table except this effective date to field.
Please advice as to in which table is this field present.
Thanks,
RG

Hi RG,
These both fields EFFECTIVITY_DATE & DISABLE_DATE are available in base table : BOM_COMPONENTS_B
SELECT EFFECTIVITY_DATE, DISABLE_DATE FROM BOM_COMPONENTS_B WHERE BILL_SEQUENCE_ID = :p_bill_seq_id
HTH
Sanjay

Table Name for Date Profile & SLA

Hi,
What is the table name for Data Profile / Date Type etc and also for SLA tables?
Rgds,
VR.

Hi
here are the table for date profile, service profile and response profiles.
1. Date profile:- CRMC_DATES_PRF
2. Service profile:- crmd_serwi
3. Response profile :-crmd_escal
Regards
Naresh

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Tables for DTP and Infopackage

Hi ,
My requirement is we need to write a custom ABAP Program to view properties and various tabs, details in the tab etc for DTP and Info package. So we need the list of tables or any sources from where the data is fetched for the each of details in DTP and Info packages.
For example: Will get the Infopackage Data Selection details from table 'RSLDPSEL'. Like this we need table for each settings in Infopackage and DTP.
Regards,
Lavanya.

HI,
Infopackage related table:-
RSLDPIO-     Links datasource to infopackages
RSLDPIOT-infoPackage Text Description
RSLDPRULE-ABAP source code for InfoPackages
RSLDPSEL -Hardcoded selections in InfoPackages
RSMONICDP-Contains the request-id number by data target
RSPAKPOS-List of InfoPackage Groups / InfoPackages
DTP Related Tables:-
RSBKDTP       BW: Data Transfer Process Header Data
RSBKDTPH      DTP: Historic Versions
RSBKDTPSTAT      Status Information on Data Transfer Process
RSBKDTPT      Texts on Data Transfer Processes
RSBKDTPTH      Texts on Data Transfer Processes
RSDDSTATDTP      Table for WHM Statistics. Details DTP
RSOACUBE_DTP      BW: OLTP Direct Access: Directory of Assigned Remote DTPs
RSBKDATAPAKSEL      DTP: Data Package Selections
RSBKSELECT      Selections for DTP Request (Summary)
RSBKREQUEST      DTP Request
RSBKREQUEST_V      View of DTP Request
RSBKBP      Breakpoints
RSBKDATAINFO      Information on DTP Runtime Buffers
RSBKDATAPAKID      DTP: Status Table for Data Packages
RSBKSUBSTEP      Properties of Substeps in a DTP

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

Table for Valid to date in BOM item

Hi Exeprts,
Can any one help me on this in which db table Valid to date:DATUB is Updates with reference to Change Number.
Best Regards,
Venkata Siva.
Edited by: venkata siva reddy on Apr 27, 2011 9:28 PM

Hi
The Valid-to date will always be set to 31.12.9999. Instead you can get the valid-to date using the below logic.
-> Get all the BOM from T415A table for the material number into T_T415A
-->LOOP AT t_t415a.
    ON CHANGE OF t_t415a-matnr OR t_t415a-werks OR t_t415a-stlal.
      IF sy-tabix NE 1.
        MOVE : v_matnr TO t_dates-matnr,
               v_werks TO t_dates-werks,
               v_stlan TO t_dates-stlan,
               v_datuv TO t_dates-datuv,
               v_stlal TO t_dates-stlal.
        IF v_matnr NE t_t415a-matnr.
          t_dates-datub = c_99991231.
        ELSE.
          t_dates-datub = t_t415a-datuv - 1.
        ENDIF.
        APPEND t_dates.
        CLEAR :
        v_matnr,
        v_werks,
        v_stlan,
        v_datuv,
        v_stlal.
      ENDIF.
    ENDON.
    v_matnr = t_t415a-matnr.
    v_werks = t_t415a-werks.
    v_stlan = t_t415a-stlan.
    v_datuv = t_t415a-datuv.
    v_stlal = t_t415a-stlal.
ENDLOOP.
Regards
Dhurga

Table for date of manufature

Similar Messages

Maybe you are looking for