ProjectMix with Logic 8.01, Macbook Pro, and Leopard.

The subject line gives my set up. It is pretty hopeless to get this to work. I have a few questions that I would love to have answered.
1. When I hook up the ProjectMix to my Macbook Pro, it is hooked up via the firewire connection. Do I need to also hook up midi cables? I thought the ProjectMix would work with just firewire between the mixer and the computer but when I read the section of the manual about control surface hookup, it seemed to suggest that I needed to hook up bidirectional midi cables.
2. I realize that part of my problem may be that M-Audio has not released drivers for Leopard yet. But there seem to be a few posts on this forum that the latest 10.4 drivers work with Leopard. Is there any consensus on this matter?
3. Most troubling is the fact that when I hook up a firewire 800 external drive to my MacBook Pro, the computer locks up when I try to access the drive while running Logic Pro with the Project Mix hooked up. I searched the M-Audio web site for any possible FAQs about this and found one that said, in effect, hooking up the ProjectMix and an external firewire 800 drive to a computer may cause conflicts and create distortion and drop outs because both ports are accessing the same port within the computer. Their solution was to get a PCMIA firewire interface card for the computer and hook the ProjectMix to that. No dice with the MacBook Pro since it doesn't have a PCMIA slot. Holy mackarel! Has anyone managed to use a MacBook Pro, the ProjectMix and an external firewire 800 drive either under Tiger or Leopard system software? Should I be looking for a different interface?
I realize this is quite a ball of wax but any help would be appreciated. I hate to think that my ProjectMix has become a doorstop since I tried to change over from ProTools to Logic. After all, the ProjecMix has a setup specific to Logic that I set when I booth up the ProjectMix.
Mike Nielsen
Dover, DE

Mike Nielsen wrote:
3. Most troubling is the fact that when I hook up a firewire 800 external drive to my MacBook Pro, the computer locks up when I try to access the drive while running Logic Pro with the Project Mix hooked up. I searched the M-Audio web site for any possible FAQs about this and found one that said, in effect, hooking up the ProjectMix and an external firewire 800 drive to a computer may cause conflicts and create distortion and drop outs because both ports are accessing the same port within the computer. Their solution was to get a PCMIA firewire interface card for the computer and hook the ProjectMix to that. No dice with the MacBook Pro since it doesn't have a PCMIA slot. Holy mackarel! Has anyone managed to use a MacBook Pro, the ProjectMix and an external firewire 800 drive either under Tiger or Leopard system software? Should I be looking for a different interface?
I cannot really comment on this except to say that other posts on the websites I mentioned on my previous post show that you are not alone. I have successfully run a Focusrite LiquidMix on one FW400 port and the ProjectMix on the other FW400 port on my iMac. At the time I built my external drives (from my own choice of case, interface and hard disk) I opted to go USB2, partly because of concerns about FW audio and FW disks not being compatible and partly because I wanted to put two drives in each case, one of which was for use on Windows machines. Windows is cr*p at handling FW drives, so USB2 was essential for me.
EDIT: maybe, just maybe you could either change the interface in your external drive case OR if you are really lucky maybe someone somewhere sells USB2 to FW adapters so you could plug your FW drive into a USB2 port. I can't say I've ever seen one, but you never know....
Fleabag

Similar Messages

What is wrong with OSX on the MacBook Pro and when will it be fixed?

When running Second Life or Worlds of Warcraft or just quick browing... anything graphically intensive on the MacBook Pro, the machine slows to a crawl, eventually completely freezes up. The cursor doesn't move, pressing the Caps Lock key does not change the Caps Lock light and the machine is no longer reachable from any other machine on the network. The only means available to recover is to hold the power button down until the Mac powers off and then restart it. This doesn't happen when running XP through boot camp and windows client versions of these programs. What is wrong with OSX on the MacBook Pro and when will it be fixed? Thanks.

I am not sure that this relevant to the discussion. But I am searching for anyone else who is seeing random freezes on 10.4. I usually don't see anything in the log after I have to do a hard reboot of the box. However, I have noticed some I/O messages when I have been able to console into an affected device, but have not captured to this point. Also, when I am able to console, the box will accept the login, but times out when trying to authenticate the password.
I am also seeing a server freeze on my G4s. I am able to reproduce the problem with a clean install from the 10.4 disk. The issue is reproducible with tcpdump, dumpcap as well as tshark. I have also tried compiling the tools with different versions of libpcap. I am able to reproduce this problem every time with a packet generator sending small packets.
It seems that the small packets aggravate the underlying cause. As the more small packets are sent the quicker I am able to reproduce the problem. With a mix of packet sizes, as seen in most networks, this issue is hard to reproduce. We have been using the G4 since 2003 as a packet analysis tool and it has been very stable up until we attempted to do analysis of a VOIP network with 10.4. The small RTP packets in conjunction with 10.4 seem to be the culprit.
So far I am not able to reproduce the freeze on a 10.2 or 10.3 image. This is not isolated to bad hardware, as I have been able to reproduce on 4 different Xserves in my labs with similar configurations.
I currently have a G4 set up in my lab and would be able to supply any info that may be needed to track down this issue. I have been thrust into administration on this box recently so I am not very familiar with debugging procedures on the Xserve or MacOS. However, I have the hardware and the test equipment that many in a production setting may not have at their disposal. So if anyone, with extensive knowledge of the Xserve or MacOS, is willing to work with me to track down this issue I am willing to do the leg work in the lab. I would appreciate any assistance that is available.

Just bought a new imac, need to take logic off my macbook pro and install onto my imac

Just bought the new imac, and I need to get logic pro 9 off my macbook pro and onto my imac. Both my install licenses are used, so will I have to buy a new license as well. If any and all help would rock. Thanks, JASON

How did you receive Logic? Reinstall from the distribution media. You may be able to move the Logic application, but unless you know what and where the support files are it may prove difficult for it to work correctly.
I would assume you can obtain another license by calling AppleCare Customer Service unless you are moving Logic to a new computer and removing it from the other computer. In this case you do not need to purchase another license.

Printing wirelessly with a brand new MacBook Pro and an old G4 Titanium

I have a brand new MacBook Pro set up to print wirelessly and it is working wonderfully.
The problem is my other laptop that is on 10.3.9 is not finding the printer at all. I have all the drivers needed but can not figure out what else I need to do to make this happen. I thought it might be an issue of one computer using Bonjour and one using rendezvous. Is there a way I can have both operating systems talk to the same printer on my AE network?
Please help!
Brian

Make sure you have "authorized your New MAC" to do this if you haven't in iTunes click on "Store" then "Authorize this computer"
If thats good then there are a couple of options, First would be, Connect your iPod, Cancel the Sync when it appears. Click on "File" then "Transfer purchase from iPod"
Option 2 would be create a backup of your iTunes library on your old computer, may take a couple of CD's to do so, all depends on the size of your library. Then simply restore it on the MAC.
Option 3 (My preferred option) if your old computer is on the same network, turn on Home Sharing on both the Old and New iTunes and simply drag the music you want right on over.
Very important though that the new itunes be authorized first for any of those to work.
Hope this helps.
V22Tweek

MacBook Pro and Leopard knock out my wireless network

I am new to Mac, just having purchased the MacBook Pro with Leopard 10.5.1. installed. I have a Netgear WPN824 router that works perfectly with windows based computers. I use WEP 64 bit security. The MacBook connected with no problem and surfs the web fine until I try to download certain files on the MacBook (such as the HP drivers for my all in one printer) or try certain video feeds online , such as a cnn video. The download not only stops midstream but actually knocks out my entire network causing me to have to unplug my cable modem and router and restart everything. This is a real problem. Does anyone have a clue why this is happening? I can download the same files on a Windows laptop with no problem. Help.

Hmm. It might not be the MBP. Are you using Safari? I've noticed that Safari at times is incompatible with many websites. Try downloading Firefox and try the same downloads.

MacBook Pro and Leopard updates

I got a MacBook Pro in January with OS X 10.5 installed. Soon after I got it, I started having a variety of problems.
--After sleeping, it would wake up but the screen would be turned off. Sometimes the screen would turn on if I pressed the power button. Sometimes it wouldn't, and I'd have to shut down by pressing and holding the power button.
--If I plugged it in while sleeping, it would wake up, even if it was closed.
--It unexpectedly went to sleep a couple times.
--When I opened it after l sleeping, it sometimes would shut off rather than waking up.
--The sound turned off completely--iTunes indicated that it was playing, but there was no sound.
--It froze frequently.
Other people have mentioned several other problems on MacBook Pros, especially with the keyboard, trackpad, and airport. See this thread: http://discussions.apple.com/thread.jspa?threadID=1432781&tstart=0
I took it to an Apple store and they reset the power manager. That didn't solve the problems, so I went back. The second time he advised me to uninstall the 10.5.2 update, which came out in mid-February. Apparently there's something about this update that messes up the hardware on certain models of the MacBook Pro--specifically the 2.2 GHz models. I ran an "Archive and Install" (reinstalled Leopard from the install discs) and then didn't install the 10.5.2 update. I did that a week ago and haven't had any problems since.
My only problem now is that OS X 10.5 is not as good as 10.5.2. 10.5.2 fixes some of the annoying features of 10.5, like the translucent menu bar. Does anyone know when Apple will release a new Leopard update that doesn't cause these problems?

Henry
I have an MBP 2.2 purchased earlier last year and have applied updates since. I've had none of the problems others refer to. So to your problems.
1) Always run Disk Utility after an update and do the Repair permissions. If the window indicates that some permissions have been repaired rerun the program until it's all clear. Some advise to repair permissions both before and after an update.
2) To upgrade to 10.5.2 download the combo update for your machine from Apple/Support/Downloads. This is more reliable than Software Upgrade for your situation. Again do a Repair permissions after the restart(s). Don't interrupt the restart process. I think in this case there is a double restart before the machine completes the update.
3) After all this run Software Update to see how many more updates are required. Probably these can be done through SU. Again repair permissions after.
4) Check your Energy Saver preferences in System Preferences to either set them to default values or as you want them. If at some time these were changed this could explain some of the unexpected behaviours.
There are all sorts of issues arise for different people but I have found Apple products to be very reliable since I bought my first Mac in 1984. Perfect - no.
Neville

2010 Macbook Pros and Leopard 10.5

I've recently found out the hard way that you cannot run Leopard 10.5 on a new Macbook Pro (2010 models). I sold off my old MBP (17" - 2006 model - Core Duo 2.16) and recently purchased a brand new MBP 17" Intel Core i7. I tried installing 10.5 on the internal hard drive. I tried booting from external hard drive with the 10.5 OS installed. Yesterday, I confirmed (after calling Apple Support) that the new 2010 MBP models will not run any old version of OSX - they will only run 10.6.4 and higher.
The reason why I would like to be running Leopard 10.5: so I can use some ExpressCard/34 adaptors I have - namely, the Duel Adaptor (a Panasonic P2 card reader). It is quite frustrating to find that the tools I've been using in my video work flow for years have come to a complete halt because I bought a brand new computer - a brand new computer with the same ports and connectivity as my previous computer... but with a newer, incompetent OS.
My questions:
Is there a list of ExpressCard/34 devices that DO work on the 2010 MBP's with Snow Leopard 10.6.4 (even if you have to download the drivers)?
Is there a version of Leopard 10.5 that has been reprogrammed to work on the 2010 Macbook Pros with the Intel Core i5 and i7 processors?

Murat Lahur - Thanks for the research. That's all I could find as well.
rkaufmann87 - Thank you. I've heard rumors of hacked and/or manipulated versions of OSX, however, I've never seen one.
OrangeMarlin - Incompetent only in the sense that the Apple motto we love, "plug and play on a mac", seems untrue with so many drivers dropped, unsupported or unavailable for Snow Leopard. I have all the available drivers for P2 installed. I can read P2 cards by plugging the camera into the computer via firewire. However, plugging the camera into the computer to download footage means that the camera is tied to the computer. It was wonderful having a ExpressCard P2 card reader that downloaded the cards faster than firewire and kept the camera free for shooting on busy days.
As far as my research has shown, there is no 54 to 34 ExpressCard adapter that works with Snow Leopard. Therefore, Snow Leopard has seriously slowed my work flow and left me with useless devices.

Can someone help with Kernel panic on macbook pro snow leopard 10.6.8

Interval Since Last Panic Report: -12988464 sec
Panics Since Last Report:          -20
Anonymous UUID:                    393F518B-4264-4ABB-9D04-AA4E5F948705
Sun Jan 5 16:11:24 2014
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x0026d09a, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x0b54f7a8, EBX: 0x00000081, ECX: 0x09330000, EDX: 0x0ccb6000
CR2: 0x00000008, EBP: 0x7e43bc28, ESI: 0x00000000, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x0026d09a, CS: 0x00000008, DS: 0x80000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x7e43ba08 : 0x21b837 (0x5dd7fc 0x7e43ba3c 0x223ce1 0x0)
0x7e43ba58 : 0x2abf6a (0x59e3d0 0x26d09a 0xe 0x59e59a)
0x7e43bb38 : 0x2a1a78 (0x7e43bb50 0x0 0x7e43bc28 0x26d09a)
0x7e43bb48 : 0x26d09a (0xe 0x48 0x80220010 0x80000010)
0x7e43bc28 : 0x26dda4 (0xccb6000 0x0 0x7e43bcb8 0x2345f4)
0x7e43bc58 : 0x26e022 (0x10daf80 0xcc45de0 0xcc446e0 0x7e43bcb8)
0x7e43bc78 : 0x26ec52 (0xccb6008 0x1 0xcc45e00 0xae63ae0)
0x7e43bcb8 : 0x261954 (0xccb6000 0xccb82ec 0x1 0x17f0000)
0x7e43bde8 : 0x261b4b (0xffe00000 0x7fff 0x0 0x0)
0x7e43be28 : 0x22ca96 (0xad1eae4 0x0 0x1 0xffe00000)
0x7e43be78 : 0x481892 (0xba07dac 0x9 0x2 0xb54f7a8)
0x7e43bec8 : 0x48d017 (0xb8b0a80 0x9 0x0 0xb8b0b90)
0x7e43bf38 : 0x48fec0 (0x9 0x9cfb3f0 0x7e43bfa8 0x100001f)
0x7e43bf68 : 0x219432 (0xb54f7a8 0xffffff7f 0x5fbfeb30 0x7fff)
0x7e43bfa8 : 0x2aacb4 (0xffffffff 0x1 0x0 0x97c3524)
0x7e43bfc8 : 0x2a1976 (0x0 0x2 0x0 0xb2ccc64)
BSD process name corresponding to current thread: Finder
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro4,1 (Mac-F42C86C8)
System uptime in nanoseconds: 17648135341081
unloaded kexts:
(none)
loaded kexts:
com.intego.iokit.VirusBarrierX6Service    10.6.18
com.intego.iokit.VBX6NKE    1
com.intego.iokit.BehavioralKext    1
com.intego.kext.VirusBarrier.AppBarrierKPI    10.6.18
com.intego.kext.VirusBarrierKPI    10.6.18
com.intego.iokit.ContentBarrierService    1801
com.increw.kext.speedit    0.32
com.markspace.driver.Android.RNDIS    1.2
com.intego.kext.ContentBarrierBootTime    380
com.BitDefender.iokit.av    1.13.0b156
com.roxio.BluRaySupport    1.1.6
com.apple.filesystems.udf    2.1.1 - last loaded 12050507340108
com.apple.driver.DiskImages.SparseDiskImage    289.1
com.apple.driver.DiskImages.ReadWriteDiskImage    289.1
com.apple.driver.DiskImages.CryptoEncoding    289.1
com.apple.driver.DiskImages.UDIFDiskImage    289.1
com.apple.driver.DiskImages.RAMBackingStore    289.1
com.apple.driver.DiskImages.HTTPBackingStore    289.1
com.apple.driver.DiskImages.FileBackingStore    289.1
com.apple.driver.AppleHWSensor    1.9.3d0
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleTyMCEDriver    1.0.2d2
com.apple.driver.InternalModemSupport    2.6.2
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleIntelYonahProfile    14
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleUpstreamUserClient    3.5.7
com.apple.driver.AppleIntelPenrynProfile    17
com.apple.driver.AppleMCCSControl    1.0.20
com.apple.driver.AppleGraphicsControl    2.10.6
com.apple.driver.AppleIntelNehalemProfile    11
com.apple.driver.AppleHDA    2.0.5f14
com.apple.driver.AudioIPCDriver    1.1.6
com.apple.driver.AirPortBrcm43xx    423.91.27
com.apple.GeForce    6.3.6
com.apple.driver.SMCMotionSensor    3.0.1d2
com.apple.driver.AppleBacklight    170.0.46
com.apple.iokit.AppleYukon2    3.2.1b1
com.apple.driver.AppleIntelMeromProfile    19
com.apple.driver.AirPortBrcm43224    428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0a1
com.apple.driver.AppleLPC    1.5.1
com.apple.kext.AppleSMCLMU    1.5.2d10
com.apple.driver.AppleUSBTCButtons    201.6
com.apple.driver.AppleUSBTCKeyEventDriver    201.6
com.apple.driver.AppleUSBTCKeyboard    201.6
com.apple.driver.AppleIRController    303.8
com.apple.iokit.SCSITaskUserClient    2.6.8
com.apple.BootCache    31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.iokit.IOAHCIBlockStorage    1.6.4
com.apple.driver.AppleAHCIPort    2.1.7
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AppleFWOHCI    4.7.3
com.apple.driver.AppleUSBHub    4.2.4
com.apple.driver.AppleRTC    1.3.1
com.apple.driver.AppleUSBEHCI    4.2.4
com.apple.driver.AppleUSBUHCI    4.2.0
com.apple.driver.AppleEFINVRAM    1.4.0
com.apple.driver.AppleHPET    1.5
com.apple.driver.AppleSmartBatteryManager    160.0.0
com.apple.driver.AppleACPIButtons    1.3.6
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.3.6
com.apple.driver.AppleAPIC    1.4
com.apple.driver.AppleIntelCPUPowerManagementClient    142.6.0
com.apple.security.sandbox    1
com.apple.security.quarantine    0
com.apple.nke.applicationfirewall    2.1.14
com.apple.driver.AppleIntelCPUPowerManagement    142.6.0
com.apple.driver.DiskImages.KernelBacked    289.1
com.apple.driver.IOBluetoothHIDDriver    2.4.5f3
com.apple.driver.AppleProfileReadCounterAction    17
com.apple.driver.AppleProfileTimestampAction    10
com.apple.driver.AppleProfileThreadInfoAction    14
com.apple.driver.AppleProfileRegisterStateAction    10
com.apple.driver.AppleProfileKEventAction    10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface    74.2
com.apple.iokit.IOBluetoothSerialManager    2.4.5f3
com.apple.iokit.IOSerialFamily    10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver    2.0.5f14
com.apple.driver.DspFuncLib    2.0.5f14
com.apple.iokit.IOAudioFamily    1.8.3fc2
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleBacklightExpert    1.0.1
com.apple.iokit.IOFireWireIP    2.0.3
com.apple.iokit.AppleProfileFamily    41
com.apple.driver.AppleHDAController    2.0.5f14
com.apple.iokit.IOHDAFamily    2.0.5f14
com.apple.iokit.IO80211Family    320.1
com.apple.iokit.IONetworkingFamily    1.10
com.apple.driver.IOPlatformPluginFamily    4.7.0a1
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleSMC    3.1.0d5
com.apple.nvidia.nv50hal    6.3.6
com.apple.NVDAResman    6.3.6
com.apple.iokit.IONDRVSupport    2.2.1
com.apple.iokit.IOGraphicsFamily    2.2.1
com.apple.driver.AppleUSBMultitouch    207.7
com.apple.driver.BroadcomUSBBluetoothHCIController    2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController    2.4.5f3
com.apple.iokit.IOBluetoothFamily    2.4.5f3
com.apple.iokit.IOUSBHIDDriver    4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice    2.6.8
com.apple.iokit.IOUSBMassStorageClass    2.6.7
com.apple.driver.AppleUSBMergeNub    4.2.4
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    2.6.8
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.6.1
com.apple.driver.XsanFilter    402.1
com.apple.iokit.IOATAPIProtocolTransport    2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.8
com.apple.driver.AppleFileSystemDriver    2.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IOFireWireFamily    4.2.6
com.apple.iokit.IOUSBUserClient    4.2.4
com.apple.iokit.IOUSBFamily    4.2.4
com.apple.driver.AppleEFIRuntime    1.4.0
com.apple.iokit.IOHIDFamily    1.6.6
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.TMSafetyNet    6
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    289.1
com.apple.iokit.IOStorageFamily    1.6.3
com.apple.driver.AppleACPIPlatform    1.3.6
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.5 GHz, 6 GB, SMC 1.28f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: HGST HTS721010A9E630, 931.51 GB
Parallel ATA Device: MATSHITADVD-RAM UJ-875S
USB Device: Backup+ Desk Mac, 0x0bc2 (Seagate LLC), 0xa0a5, 0xfa400000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfa200000 / 2
USB Device: USB 2.0 Hub [MTT], 0x050d (Belkin Corporation), 0x0017, 0xfa210000 / 4
USB Device: Mass Storage, 0x0926, 0x0004, 0xfa213000 / 6
USB Device: USB 2.0 Hub, 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0xfa216000 / 5
USB Device: USB HID Device, 0x1020, 0x0206, 0xfa216400 / 9
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfa216100 / 8
USB Device: 5600-6600 Series, 0x043d (Lexmark International Inc.), 0x013f, 0xfa216130 / 10
USB Device: USB HID Device, 0x1020, 0x0206, 0xfa216200 / 7
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000 / 4
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000 / 2

VirusBarrier needs to be uninstalled using the original installer. That installer will have a button that allows you to uninstall the software. If you no longer have the original installer, you will need to re-download it.
BitDefender must be removed using the uninstaller provided by the developer. That uninstaller is found on the .dmg file that also contained the original installer. If you no longer have that, you will need to re-download it.
Do not try to locate and remove these items manually! They must be removed using the uninstaller!
Note that it's a bad idea to have two anti-virus programs like these installed and active at the same time. That can easily cause all manner of problems, including serious performance problems. For more information about protecting yourself against malware, see my Mac Malware Guide.
You also have SpeedIt installed, which is a badly outdated program that has been discontinued. The developer is no longer in business. I would be surprised if it wasn't causing problems. Unfortunately, because it is so old and the developer's site is gone, I cannot find any uninstaller or uninstallation instructions. See if you have a SpeedIt uninstaller somewhere. If you still have the SpeedIt installer somewhere, that may include the uninstaller.
If removing those programs doesn't fix the problem, the only other third-party kernel extensions you have installed are:
com.markspace.driver.Android.RNDIS    1.2
com.roxio.BluRaySupport    1.1.6
You'll need to remove those using the uninstaller provided by the developers (markspace.com and roxio.com).

MacBook Pro and 27" Display not playing nice together

I'm having a rather strange problem with my Early 2011 MacBook Pro and my 27" Apple Display (Mini-Display port). They don't want to play nice together. The display will randomly/intermittently disconnect and turn black, then reconnect, sometimes after a second or so, but sometimes not for a good 10 seconds or more.
- My MBP works fine on other monitors (Thunderbolt 27", 24" LG via DVI adaptor).
- My wife's MBP works fine on this monitor.
- Had a tech look at the monitor, his MacBook works on it fine too.
- The combination of my MBP and this 27" Apple Display gives you the result shown in the video.
It happens quite frequently -- often enough to make working on this combination unbearable. But I have no clue as to what's going on here.
In "System Information" under "Graphics / Displays", the display not show up as connected to either the PCIe or Built-In graphics adapter when the 27" has turned black. When the screen is on, it shows up.
Here's a YouTube video of the symptoms.
http://www.youtube.com/watch?v=z0C50k0189I
I'm stumped. Does anyone have any ideas?

Your video shows the MacBook Pro display turning blue for a few seconds, several different times. This is an acknowledgement that a display is coming (or going).
Unencumbered by anything sensible, my diagnosis would be that you have a loose connection.
Mini DisplayPort cables can be diabolical. When inserting, you must make certain that essentially ALL of the metal end disappears inside the computer jack.

MacBook Pro and Virgin Media Broadband (Router WNR2000)

Hi there...I'm having issues with my brand new macbook pro and virgin media broadband wireless.
I share an internet connection with 4 people wirelessly in a house..We have 20MB broadband, and have been supplied by Virgin with a netgear wireless n router (WNR2000).
My internet connection drops randomly, and I mean really randomly. Sometimes it is fine for a whole day. It is generally slower than my old laptop (Windows platform, hewlett packard) but the thing that bothers me mainly is that the connection drops. Today it has dropped loads, not helpful when having a long skype conversation.
I have rang virgin and they are completely useless, refuse to help because the other 3 computers (all windows based) run fine and they say it is a problem with the macbook pro. However, I have tested this very laptop with another virgin connection/router and its been fine. Also when my friend brings his macbook pro to mine he has the same problem - slow internet and connection drops.
Does anyone know of any solution to this??? I dont know what to do and im close to pulling my hair out.
My TCP/IP settings i'm not sure if they are correct...but everytime the connection drops properly, i have to restart the router and it is fine - when it drops i get a message on airport about a self assigned IP.
i can post my settings if required....
any help would be much appreciated
cheers

Hi there
Do the other people sharing the Broadband find that their connection is dropping.
You could try a router reset or check if there are any firmware updates. Failing that try a different router, I have a Linksys router WRT150N.
Just thought of something else, how far away from router are you. Wall composition is quite important, so is the positioning of the router to get best coverage.
thats about the best suggestions i can come up with. Hope it helps.

Replacing logic board uni macbook pro 17"

I want to upgrade my macbook pro 17 early 2009 by replacing old logic board with logic board of macbook pro 17 mid 2009 (3.06). Is it compatible with newer one?

I can't find a definitive answer to this question, though my suspicion is that it may be compatible. But if it is, you'd be paying a very large amount of money for a speed upgrade of almost negligible significance. (2.66GHz or 2.93GHz to 3.06GHz). At most that's a 15% improvement — barely perceptible, if perceptible at all, in day-to-day use.

How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

How to Downgrade OS X Yosemite Back to OS X Mavericks

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to pur

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.

you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard. It is only on a disk, not in download form.

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

ProjectMix with Logic 8.01, Macbook Pro, and Leopard.

Similar Messages

Maybe you are looking for