Projector navigation help

Hi there.
I hope this isn't too confusing...
I have built a projector for a cd-rom presentation and
everything's going well. My interface and drop-down navigation are
all loaded into a shell file and are on the top level. All swf's
are then loaded into a level below the navigation. My main issue is
figuring out if this drop-down menu navigation can load a swf and
then move the playhead to a designated frame.
i.e. "About" is the primary button. OnRelease reveals a
drop-down menu in which there are 4 secondary buttons,
"Introduction," "History," "Client List," and "Capabilities." Each
of these secondary buttons are designated to sections in one larger
swf. Upon clicking on one of these I would like to load the swf
into a designated level and move the playehead to it's
corresponding frame label. Problem is, it takes a few seconds to
load the swf into the level because the projector is pulling it
from the disc thus skipping the code telling it to play the
corresponding frame label. It ends up just loading the swf and
playing it on the 1st frame.
One solution is to make the primary "About" button load the
corresponding swf. Then all the secondary buttons in the drop down
would just call to that level {_level18.gotoAndPlay(introTwo);} I
want to find another way around this because I didn't want to load
content on the primary button. I wanted to provide the options
first then let them choose which section.
Hope you can help!!
Thank you for your time!!

you must wait until loading is complete before executing your
goto methods. ie, use preloader code to ensure _level18 is loaded
before you execute your _level18.gotoAndPlay().

Similar Messages

IView Navigation Help

Hi Experts,
How can I navigate from a Nested iView to another Nested iView one level up?
My application is such that the Parent iView contains multiple Nested iViews, which individually contain the logic to Book Holidays, Display Holidays, and Modify Holidays etc. After creating a holiday request, I want the application to jump to the Display Holidays iView, where the new request can be seen on a graph. The problem is the iView I want to navigate to is one level above where the Create logic is so I can't map an event from the Create Form's submission to the Display iView.
I've tried using the 'Navigate' components under connectors (which sounds perfect) but this is an unsupported component and doesn't work (on our setup).
For clarity, the application's structure can be visualised as:
Holiday Application (Parent iView)
...1. Display Holidays (Nested iView)
...2. Create Holidays (Nested iView)
........2.1 Submit Form (event)
...3. Modify Holidays (Nested iView)
........3.1 Submit Form (event)
After submitting the form I want to jump to the Display Holidays nested iView.
Any help would be greatly appreciated.
Best regards,
Andrew

hi,
First let me confirm if i understood your problem correctly.
You have 3 nested iviews display holidays, Create holidays, and modify holidays.
From display holidays you are navigating to create holidays and modify holidays.
once you navigate to create holidays or modify holidays and after creating or modifying the holidays you will press a button on the form, once you press this button you want to go back to the display holidays.
what are the other things that you have in the layers along with the nested iviews. If you dont have anything other than nested iviews use the following steps.
1. Remove the layers and keep only the nested iviews.
2. create a data store to store the value for the action in display holidays. for eg: when you click on create holidays store 'Create' and when you click on modify holidays store 'modify'. now use the outport and assign the value stored in the data store.
3. Create a similar data store in create holidays and display holidays and assign the values 'displayholidays' to both these actions.
4. Create a data store in the main screen that is in the level where you have all the nested iviews and connect all the outports to this datastore and assign the corresponding values coming from the nested iviews.
5. set the visibility condition on all the nested iviews. eg: visibility condition for display holidays will be true when the store@maindatastore=='displayholidays' and visibility condition for create will be true when store@maindatastore=='create'.
by doing this you will see only that screen which will satisfy the condition.
let me know if this solves your problem.
Regards,
Rk.

MAP & NAVIGATION HELP

i am planning to buy a N78 or N82
my dealer said its come with 3months navigation license.
but after this period what are functionality will dead ?
will nokia map work ?
i am confused within GPS, Map Application and Navigation . ..
NEWBOSS
::N73::

Hi newboss
It is just the "voice navigation" feature that will cease to function, you can still find your position on map, plan journeys but you won't get real time instructions unless you purchase a new license.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Multiple canvas navigation help

Hi all
I'm developing a form with multiple canvases like A,B,C and D
I'm able to navigate to the canvases successfully during run time by having some go_item code
B-->D-->C-->A
i don't want to navigate like this
my need is if I close any the canvas B,C and D during runtime the control should be navigate to canvas A and the form won't be closed
my problem is
If i close any canvas during runtime the entire form is closed
Help me!!
Note:Is there any possibility to have a separate window for each canvas? If it so then how to code in the when-window-closed trigger for navigating between those multiple windows

Hi user2233
Here is an example ...
Pls create a button in ur tab or content canvas (A) in this button pls write the following as an example...
SHOW_VIEW('STACKED_CANVAS');
GO_ITEM ('SAL'); -- Pls note this item should be navigable and visible in ur stacked canvas form
HIDE_VIEW('TAB_CANVAS'); -- or canvas (A)
In order to return back to ur tab_canvas pls create a button in this button pls write the following...
HIDE_VIEW('STACKED_CANVAS');
SHOW_VIEW('TAB_CANVAS'); -- or canvas (A)
GO_BLOCK('EMP');
GO_ITEM ('EMPNO'); -- Pls note this item should be navigable and visible in ur stacked canvas form
Hope this helps...
Regards,
Abdetu...

IMovie '11 Navigation Help - The Basics

Hi. I am using iMovie for the first time. iMovie 11 to be exact. I'm reading the Apple tutorials. They make reference to many iMovie elements, such as the "clip viewer" and the "return" button. But the tutorials do not indicate where these items are located on the iMovie screen. For example, there is nothing on the iMovie screen that I can see that is titled "clip viewer". Also, when I want to save a project or rename a project, I don't see the normal SAVE AS or RENAME options under the FILE menu that most other applications have.
Can anyone point me to a navigation guide that shows me where all these basic elements are located in iMovie? Thank you

Ken Stone has created a [great tutorial here.|http://www.kenstone.net/fcphomepage/imovie_09stone.html]
The clip viewer is the area on the right side of the Project pane.
The Enter key is the one on your keyboard.
There is no Save command in iMovie, because it automatically saves after every action.
It may help for you to know how imovie works. When you import video clips into iMovie, they are stored in an Event file, much like an iPhoto event. This is where the raw video is kept. It is not changed or edited, and is available for multiple projects.
The Project in iMovie is a list of instructions to be executed when the project is shared in final form. For example, a project may have instructions that say "go to this clip in this event and get these frames of video, then insert a title here and a transition there, and add music here." None of the actual video is in the project, but it references the event video. Every time you make an edit in your project, it adds or subtracts an instruction in the project file and it is saved instantly. So there is no Save command.
However, Murphy's Law says if something can go wrong it will, and sometimes projects can get corrupted. In this case it is good to have a backup. By far the easiest way to backup is to make sure that you Movies/iMovie Projects folder is included in your Time Machine backup.
Another way is to select your project in the Project Library view, right-click, and select Duplicate Project. This gives you a duplicate of your project at a time when it was working so you do not have to start over.
Welcome to the iMovie Discussions.

Video preview setting for projector. Help please!

Hi, I'm trying to reset my video preview preferences in Adobe After effects CC to allow me to connect to my projector. I keep getting just my laptop's as a monitor option. I want the composition to be projected on the onto the screen so i can map on my object for projection. I'm now not sure how to do this, please help.

Nobody can tell you anything without proper system info or other technical details like what projector and how it's connected.
Mylenium

Navigation help needed

We tried to use the Navigation feature in the car (with no data connection). Manual implies this will work. It never works. I sometimes just shows a message "waiting for location" or sometimes it loads the map of the area I am in but then spins and says "waiting for driving directions" yet nothing else. My GPS and android phones GPS works fine in same location.
Someone recommended I get GPS Status and we run that then Navigation app, and it shows the satellites but doesn't seem to help.
Help?

Hello Dezmo,
If you have purchased the Wi-Fi Tablet to function primarily as a navigation device when not connected via Wi-Fi and do not wish to predownload your maps prior to each trip. please contact our customer relations to see what we can do to help you.
http://esupport.sony.com/US/perl/contact-relation.pl
If you are looking for a tablet that has the Internet built in and has the same Cellular coverage your other devices enjoy, please review the S2 series currently partnered with AT&T
http://tablet.sel.sony.com/1/1/SGPT211U ... ingStarted
and to answer your final question, Most GPS devices sold have a U.S Map included, or provide a subscription service to keep you current as you have noted with your cellular device. these devices devote all their storage capacity to hold these maps already cashed for you when you update the device from their website. For more details you would need to specifically ask the manufacturer of the device for their updated maps file policy.

My mac won't connect to a projector? Help??

I've tried several times to connect my Macbook to a projector that my school uses, and it goes to an apple screen but ,y desktop never shows up on the projection. I have no idea why, does anyone else have this issue?

Try letting the router assign an IP address. In System Preferences, click the assist me button for help.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

Urgent!! My screen has quit on me and I need navigational help!

A couple days ago the screen of my iPod nano stopped working. It lights up but I can't see anything. I know the iPod itself still works because yesterday I luckily found my way to a nike+ workout. Having joined a challenge, I really need to keep logging my miles until I can get a new iPod!
Can anyone please please list what's on the menus? I can hear the clicks as I go through each menu so if I can know what each option is then I can still navigate blindly.
For example, I'm pretty sure my main menu is:
1. Music
2. Photos
3. Extras
4. Settings
5. Shuffle Songs
6. Backlight
Next step is the Extras menu, which I'm not sure of. I hear 7 clicks, so 8 options.
1. Clock
2. Games
3. Contacts
4. Calendar
5. Nike + ???
6. Notes
7. Stopwatch
8. ** What am I leaving out?**
Then I'm completely lost. Someone, PLEASE, HELP!!!! I hope this is ok with Apple, I know I need to buy another or at least get this one repaired, but it's going to take a little while.

HorseNHound14, I'm sorry you had to go through this experience. I understand how frustrating this is for you. I looked up your device in our system so that I could search for a battery replacement but was unable to locate any in our inventory. When a phone is released, the manufacturer produces a certain amount of accessories and we make that inventory available for our customers. Once the manufacture stops making that particular device, they stop producing accessories and parts for that device. We continue to sell them until there sold out, which is the reason we don't have a battery for your phone.
I do recommend trying some of the suggestions given by SuzyQ. Additionally, if you call Asurion and they allow you to file a claim and your phone is not in stock, they will offer you a replacement that is comparable. This replacement phone will include a battery.
Other than searching third party stores and online options, you may speak with us and we can check your account for eligible upgrade options also.

Thumbnail and button navigation help

I would like to start out by saying I am very new at this and am working on a portfolio website in flash CS4 and currently getting help through the tutorials over at Lynda.com. Now my problem is In the portfolio section I want a preview of the pics like a thumbnail on the bottom with a scroll bar to scroll through them all, but at the same time I would like to have buttons to navigate through these photos at the same time. I have got it to work, the only problem is let say i'm using the buttons to navigate through but then stop and go to the scroll bar on the bottom and click on one three of four pictures in front of where I left off, The image loads and everything is fine but when I go back to the buttons it continues off from where it last left off not where I clicked on the scroll bar. Not sure if you can follow that but if not ask questions I really have no clue on how to do this so any help is greatly appreciated.
Here is the code that I currently have:
myscrollpane.source=allthumbnails;
//load the thumbnails...
var thumbLoader:Loader = new Loader();
thumbLoader.load(new URLRequest("smallthumbs/portfolio01.jpg"));
thumbLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded);
function thumbLoaded(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader);
myscrollpane.update();
thumbLoader.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio01.jpg";
var thumbLoader2:Loader = new Loader();
thumbLoader2.load(new URLRequest("smallthumbs/portfolio02.jpg"));
thumbLoader2.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded2);
function thumbLoaded2(event:Event):void {
allthumbnails.addChild(thumbLoader2);
thumbLoader2.x=118;
myscrollpane.update();
allthumbnails.buttonMode=true;
thumbLoader2.addEventListener(MouseEvent.CLICK, loadMainImage2);
function loadMainImage2(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio02.jpg";
var thumbLoader3:Loader = new Loader();
thumbLoader3.load(new URLRequest("smallthumbs/portfolio03.jpg"));
thumbLoader3.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded3);
function thumbLoaded3(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader3);
thumbLoader3.x=236;
myscrollpane.update();
thumbLoader3.addEventListener(MouseEvent.CLICK, loadMainImage);
function loadMainImage(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio03.jpg";
var thumbLoader4:Loader = new Loader();
thumbLoader4.load(new URLRequest("smallthumbs/portfolio04.jpg"));
thumbLoader4.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded4);
function thumbLoaded4(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader4);
thumbLoader4.x=354;
myscrollpane.update();
thumbLoader4.addEventListener(MouseEvent.CLICK, loadMainImage);
function loadMainImage(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio04.jpg";
var thumbLoader5:Loader = new Loader();
thumbLoader5.load(new URLRequest("smallthumbs/portfolio05.jpg"));
thumbLoader5.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded5);
function thumbLoaded5(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader5);
thumbLoader5.x=472;
myscrollpane.update();
thumbLoader5.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio05.jpg";
var thumbLoader6:Loader = new Loader();
thumbLoader6.load(new URLRequest("smallthumbs/portfolio06.jpg"));
thumbLoader6.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded6);
function thumbLoaded6(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader6);
thumbLoader6.x=590;
myscrollpane.update();
thumbLoader6.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio06.jpg";
var thumbLoader7:Loader = new Loader();
thumbLoader7.load(new URLRequest("smallthumbs/portfolio07.jpg"));
thumbLoader7.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded7);
function thumbLoaded7(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader7);
thumbLoader7.x=708;
myscrollpane.update();
thumbLoader7.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio07.jpg";
var thumbLoader8:Loader = new Loader();
thumbLoader8.load(new URLRequest("smallthumbs/portfolio08.jpg"));
thumbLoader8.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded8);
function thumbLoaded8(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader8);
thumbLoader8.x=826;
myscrollpane.update();
thumbLoader8.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio08.jpg";
var thumbLoader9:Loader = new Loader();
thumbLoader9.load(new URLRequest("smallthumbs/portfolio09.jpg"));
thumbLoader9.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded9);
function thumbLoaded9(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader9);
thumbLoader9.x=944;
myscrollpane.update();
thumbLoader9.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio09.jpg";
var thumbLoader010:Loader = new Loader();
thumbLoader010.load(new URLRequest("smallthumbs/portfolio010.jpg"));
thumbLoader010.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded010);
function thumbLoaded010(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader010);
thumbLoader010.x=1062;
myscrollpane.update();
thumbLoader010.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio010.jpg";
var thumbLoader011:Loader = new Loader();
thumbLoader011.load(new URLRequest("smallthumbs/portfolio011.jpg"));
thumbLoader011.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded011);
function thumbLoaded011(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader011);
thumbLoader011.x=1180;
myscrollpane.update();
thumbLoader011.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio011.jpg";
var thumbLoader012:Loader = new Loader();
thumbLoader012.load(new URLRequest("smallthumbs/portfolio012.jpg"));
thumbLoader012.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded012);
function thumbLoaded012(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader012);
thumbLoader012.x=1298;
myscrollpane.update();
thumbLoader012.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio012.jpg";
var thumbLoader013:Loader = new Loader();
thumbLoader013.load(new URLRequest("smallthumbs/portfolio013.jpg"));
thumbLoader013.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded013);
function thumbLoaded013(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader013);
thumbLoader013.x=1416;
myscrollpane.update();
thumbLoader013.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio013.jpg";
var thumbLoader014:Loader = new Loader();
thumbLoader014.load(new URLRequest("smallthumbs/portfolio014.jpg"));
thumbLoader014.contentLoaderInfo.addEventListener(Event.COMPLETE, thumbLoaded014);
function thumbLoaded014(event:Event):void {
//add the thumbnail to the allthumbnails instance
allthumbnails.addChild(thumbLoader014);
thumbLoader014.x=1534;
myscrollpane.update();
thumbLoader014.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
largeUILoader.source="largeimages/portfolio014.jpg";
//added the next button function
next_btn.addEventListener(MouseEvent.CLICK,nextImage);
//variable is a container that holds some value...
var imageNumber:Number=1;
function checkNumber():void {
next_btn.visible=true;
back_btn.visible=true;
//if the imageNumber is = 14,then do something...
if (imageNumber==14) {
trace(imageNumber);
next_btn.visible=false;
//if imageNumber is = 1, then dont show back button..
if (imageNumber==1) {
trace(imageNumber);
back_btn.visible=false;
checkNumber();
function nextImage(evtObj:MouseEvent):void {
trace("nextimage");
//adding to the current value+1
imageNumber++;
largeUILoader.source="largeimages/portfolio0"+imageNumber+".jpg";
checkNumber();
//added the back button function
back_btn.addEventListener(MouseEvent.CLICK,backImage);
function backImage(evtObj:MouseEvent):void {
trace("backimage");
//subtract 1 from the current value...
imageNumber--;
largeUILoader.source="largeimages/portfolio0"+imageNumber+".jpg";
checkNumber();

You need to have each thumbnail change the value of the variable imageNumber when you select from the thumbnails. You can see how it changes when you use the next and previous buttons, but there's nothing to change it when you select a thumbnail that I can readily see.

My ipod keeps self navigating.help!

if you can help me sort this out,i would really appreciate it.

Try the standard fizes:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod. If still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Nokia E51 navigation help needeed

Hi, can anybody help me with my E51.
I was told that you could install some sort of sat nav application to the phone wich would enable me to use it like a sat nav.
Since reading some of the discussions that seems to be a little bit inaccurate as it doesnt contain a built in receiver.
Can any body provide me with the correct answer as i would like to use it for some sat nav work but dont know how to, i have found that it does have some sort of sat nav stuff in the nokia maps.
Please can you help and try and give it to me in plain speak as my technical ability is limited.
Thans.

Hi E51Hans
Although I am speculating here, whereas I can still obtain Drive Europe license for N95 running OVI Maps v3.01 09wk44 b01 as per screenshot here:http://i55.tinypic.com/xdf1gp.jpg as Nokia doesn't seem to be promoting their own brand Bluetooth GPS receivers anymore and OVI Maps since v3.03 is no longer supported for such use that this may well be the reason that you can no longer purchase such license unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0

E7 - GPS - Voice Navigation - Help

I had 6110 Navigator before and was using GPS in that.
Currently I am using E7. Though Nokia has declared that using the maps are fully free, when I use GPS, it asking me to connect to internet and saying connection failed. I have marked offline in the settings. But still this happens... But if I choose WLAN only in "Settings->Connectivity->Settings->Data use in home country", then I am not able to get driving directions. Then what is meant by FREE?
Next thing i love in 6110 is, when i am using the driving direction, whenever I come across any petrol bunk or food court or theatre or hospital, I will get alerts like a ping sound. But this is not available in E7 though it shows in the screen that there is a petrol bunk like that. Is this feature wantedly disabled or is there any way to enable it? Is Nokia working towards this?

I was hoping you would say V2. It has been such a long time since I used V1 that I cannot remember the keystrokes required to update your licence.
Basically what you have to do is to go through the license purchase process but just before you actually pay for it you select to update the license details. This will prompt for the Nokia Maps to connect to the server to check for any licenses available to your phone. Do this when ytou are within range of your wlan. During this upgrade process, assuming you are entitled to a 1 yr free license, the server should confirm the existence of a 1 yr license for your phone and update your phone with it.
I am sorry I cannot provide more accurate keystrokes as I just can't recall them for V1.
As navigation licences are regional, ensure that the license you have is for your region. Also, unless the maps for your region is already pre-installed, you may have to install it using the Map Loader utility which is available for download from
http://europe.nokia.com/A4984199
You will also find the latest (V2) version of Nokia Maps here should you decide to upgrade the V1 you currently have.

Recordset Navigation Help

Good Afternoon
Experts:
I have quite the dilemna this afternoon. My application performs a simple select all records from a table to initialize navigation...previous, next, first and last.
However, I now have added a routine to load the last viewed record, by the
logged on User, in the recordset. This now causes the original navigation
to not be in order.
My Question:
Is it possible to perform the select all records and then position a "cursor/index/reference starting point" to a value in that recordset?
Example:
Recordset returns:1,2,3,4,5,6,7,8,9...etc
LastViewed = 5 so base all navigation off of 5...6 next record, 4 is previous record
Thanks,
Ed

Hi Ed!
This is impossible to implement your issue using DI-RecordSet object, but as an option i could suggest you to implement it by stored procedure (T-SQL query) and execute it by DoQuery().
To do it you have to:
- be able to get the last viewed record by code (or T-SQL)
- use IDENTITY function to build an order you want
- use UNION operator to get <i>5,6,7,8,9,1,2,3,4</i> instead of <i>1,2,3,4,5,6,7,8,9</i>

IPod Navigation - Help?

I just bought a 30Gb iPod and I can barely control it.
There's zero documentation on the "light touch" navigation of menus, and I have no clue what I'm supposed to be doing or what it's doing. I searched everywhere and I guess I'm alone in this:
If I just barely make contact and move my finger downward over the buttons, about 60% of the time it'll do what I want and move the selection in the direction I'm trying for. The other 40% of the time it decides I need to move in the opposite direction.
I've tried everything and varying degrees of pressure, and some fingers work better than others, but generally it's very hit or miss approaching 50/50 and frustrating as ****.
Is this thing broken, am I doing it wrong, or are my fingers just not "the right kind" for an iPod? If I knew what I was supposed to be doing beyond "light touch" maybe I could coax it in a better way, but at the moment I'm inclined to return it.
It may also just be me 'cuz I've been able to hold my finger an inch over standard laptop touchpads and get them to move accurately, but regardless this *****.
Also, is there any way to jump further down in the song list? I don't have very much music, but it's still a **** of a lot to scroll through to get to a particluar song. With my current menu-disabled status though, jumping through the artists/album lists is just as frustrating if not more so.
Thanks in advance. I want this thing to work.

Hello,
2 things to remember
1. the click wheel is a wheel, so you are to move your finger in a circular direction to follow the wheel, it will scroll alot better if you move around in a circle rather that straight up and down.
2. Although it is light touch, don;t be afraid to touch the wheel, you will probably have better results with a lighter touch than a very heavy finger on the wheel, but don;t be afraid to touch the wheel.
Jamie

Projector navigation help

Similar Messages

Maybe you are looking for