Promotion Condition (VKA0) Not Created after activation

Hi
We currently activate promotions using WAK5 and WAK16. On WAK5 you can see the status of the sales price condition is set at B, however the VKA0 condition is not created.
In the process we perform supply source determination 45 days before the promotion start date (this is done for F&R) and we activate the promotion 5 days before the start date (this is done for our POS system)
What could be the cause of the VKA0 condition not being created?
Rgds

Hi Sush,
In that table where the path you indicate takes you, you just need to insert the following entries:
BIDDER
COLLAB
EVALUA
EXTERN
INTERN
Hope this will help you.
By the way, where are you implementing PPS?
Best regards,
André Sousa

Similar Messages

  • Manual rebate condition exclusion not refreshed after redetermination of it

    Hi Experts.
    I am working with CRM 4.0.
    Lately, we realized there is an error occurring in the price deternination:
    The condition exclusion for manual rebate condition is not refreshed after redetermination of the product. There is missing a price validation before saving the document with the new product.
    Step-to-step description of the error:
    1)     I am creating an order in trx. CIC0 or CRMD_BUS2000115 and determine the product (sector A).
    2)     Now I assign a manual rebate (condition Z...) of 20 % on item level.
    3)     On header level I replace the product to one of another sector (B).
    4)     I check the pricing conditions of the new product on item level. The same rebate of 20 % is maintained.
    This is an error, because the condition exclusion for products of sector B allows rebates only until 5 %.
    Can anybody help me, please.
    Best regards,
    Cristina

    This is not standard due to information of SAP OSS.

  • Settings not working after activating icloud

    settings not working after activating icloud
    clicking on any button under settings leads to icloud. i am a new user of apple

    Hi sona ayanikalath,
    Welcome to the Apple family! I understand that you are experiencing some issues with your new iPhone 6. Can you clarify your issues a bit more? With the information provided, I recommend restarting the settings application as well as your iPhone:
    Force an app to close in iOS - Apple Support
    http://support.apple.com/en-us/ht5137
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201559
    - Matt M.

  • MIGO should not create after PO Delivery Date

    Hi,
    We have a PO with multiple line items and diff. Delivery Dates...
    We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
    Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
    Please suggest.

    If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
    Just put the same date as delivery date in this field. Then  system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
    You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
    Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
    **Edited by: Dëv Päträ

  • New field in ODS - data value does not flow after activation

    Hi,
    We have an ODS with some data in it. Now i added a new key figure to the ODS and changed the transfer and update rules accordingly.
    The value for this key figure appears in the PSA and the ODS table *40 (before activation table), but after activation the value does not flow to the activated ODS table *00.
    Any idea why this is happening?
    Pl let me know.
    Regards,
    Pradhiba

    Hi Pratibha
    I did not found anything wrong with key figure 0OI_WRBTR in BW system.
    Please check the contents of active table in *00 table using SE16 and also using tcode LISTCUBE.
    I hope you are not selecting wrong key figure while looking at active data of ODS.
    Regards
    Pradip

  • COPA DOCUMENT NOT CREATED AFTER BILLING

    HI
    COPA document is not created while doing the sale order cycle
    I’ve carried a standard sales cycle that contains sales order (VA01),
    Delivery (VL01n) and billing document (VF01). System should generate 4
    documents as follows
    1) FI Document
    2) CO Document
    3) Profit Center Accounting Document
    4) COPA Document
    But in my case only 3 documents are generated instead of COPA.
    I completed the total COPA configuration with creation of operating concern and assigned SD condition types. And also maintained number range for actual copa line items.
    Fllowing things are done.
    1) assignment of controlling area to Operating concern .
    2) controlling area setting activate profitability analysis.
    3)Valuation Strategies are assigned to the Points of Valuation in ke4u.
    4)SD Quantity Field to a COPA Quantity Field (Normally FKIMG assigned to ABSMG).
    when we excute the transcation  KE4S system display the error  Document "XXXXXXXXXX" is not profit-related and thus could not be transferred.
    when we go back  to the Billing Document in the Change mode, click on the PSG button in Account Assignment it is showing some characterstics also.

    Hi
    I have already mentioned in my pervious mail what the activities done by me. Quantity filed are already assign KE4M.Please do needful for me and give me suitable answer.

  • TR was not created after MIGO

    Hi, experts
    Sometimes after I did goods receipt with MIGO for purchsing order, the TR was not created by system. Normally after MIGO system create material document and TR at same time, then I use LT06 with reference the document no. place it to the storage bin.
    But for this case, no TR generaged. I can only use LT10 /mvt999 to move them to the storage bin.
    Can you please tell me the possible reason for this problem( TR not created)?

    Can you please check what is the movement type being used ? If you were able to use LT06 in some cases means that most probably 101 is correctly defined in LE--> Interfaces --> Movement types to trigger the TR's.
    1) however, if you are using / different movement type is being triggered and is not set up to create the TR.
    2) If you see that the movement type is still 101, you could still be creating the TR's in the background, however, if you have a background job or some other transaction that is confirming the open TR's , this could be one of the reasons why you are not able to use LT06.
    For this you can go to MIGO ( go to display tab for material document) , go to WM tab and find out the TR # there.
    You can then go to LB03 and if you scroll to the right , you will find the TO # created.
    Please go to LT21 and check who and how the TO is being created / confirmed, if thats something out of the process for you.
    Thanks

  • PR not created after MRP

    Hello SAP Gurus!
    We are having a problem regarding PR creation.
    No PR is created after running MRP and we have a lot of requirements.
    What do you think is the problem?
    How to check?
    Thanks in advance

    Hi again,
    Kindly let me know have you check these 3 steps below for you
    1) Requirement Planning for the corresponding plant must be activated in customizing for material management under consumption based planning -
    >Planning------>Activate Material Requirement Planning
    2)The Plant parameters for the corresponding plant must be activated in customizing for material management under consumption based planning->Plant Parameters-->Carryout overall maintenance of plant parameters
    3) In the material master record, you have to maintain the MRP data of the materials that are subject to automatic plannning
    Viz , MRP TYPE, MRP GROUP...Etc
    If tthe above steps are ok then check the material master record of material of which MRP run is resulting in no Purchase requistion, Kindly check the MRP Views and see whether field of MRP Type is showing ND i.e. No Planning.
    Change the same to consumption based planning and get your reults.
    I hope this will solve your problem.
    Regards,
    Tushar Patankar

  • PR not created after creating 3rd Party Sales Order

    Hi SAP,
    We have 3rd Party Sales Order process. The Problem is, PR number is not generate after creating 3rd Party Sales Order.
    the problem happen for particular customer only. I already check the credit limit and its okay.
    need help,

    If the PR is not getting created, please click on the Incompletion log in the SO to check for any missing data.
    If it is complete use VKM3 transaction to check if the SO needs a credit release., if needed relase the SO and the PR will get generated.
    Check if the material is maintained for purchasing or not.

  • PO not created after complete Approval of SC.

    Hi Experts,
    I am working with classic scenario with SRM 7.0.
    I have an issue related to creation of PO at backend.
    After complete approval of SC PO is not created in backend. The status of SC is showing as Approved.
    There is no error in RZ20 or Application monitor.
    Can you give some touch points where can I find some errors or reason for this.
    Where can I check the PO create BAPI is called on approval of SC.
    Please help me in this regard.
    Regards,
    B.N.Karthi

    Hi
    go to your BBP_PD
    click item data
    and search for your PO ?
    you must have PO there ?
    or check ANY ENTRY IN BBP_DOCUEMNT_TAB
    Do YOU have valid source of supply?
    E_OBJECT_ID-BBP_PDBEI - WHAT IS THER INSIDE?
    As laurent staed below, you must check item status too :- it could be purchaser work list too or error in process or can not be ordered...
    Muthu

  • MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007

    Hi
    We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
    Trouble shooting:
    - checked the ports 443,445 and 80
    - Disabled symantec
    - exchanged the public key ( still it is in progress in Despooler log)
    - checked the site to site permission and added the accounts.
    please suggest further.

    Yes, I know this is an old post, but I’m trying to clean them up.
    What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Sapdata3 has been not created after Sap Neatweaver 7.3

    Hi Gurus,
    I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
    However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
    can any one susggest.
    Regards,
    Jeetendra

    Hi Jeetendra,
    Check whether you system is up and running ?
    If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
    As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
    Hope this helps.
    Regards,
    Deepak Kori

  • Knowledge modules files were not created after ODI installed

    I installed ODI 10.1.3.5 on my Windows XP laptop and found that there are no Knowledge Module files in the directory ODI_HOME/oracledi/doc/km. Should these files be created after ODI installed or do we need to do something to create there KM files ? Appreciate if somebody can answer this ?
    Thanks in advance,
    Ram

    Hi Ram,
    Are you talking about KM XML files ? If yes then these are located at ODI_HOME/oracledi/impexp
    Under ODI_HOME\oracledi\doc\km you will get the PDF document about KM development guide .
    Thanks,
    Sutirtha

  • Inspection Lot not created after mvt 322.

    Dear All,
    I'm facing a problem : after a movement 322 no Inspection (QM) bach was created in QAVE...
    In MMBE WM stock view I've got the lot number (quantity 1, stock type Q), and the storage bin which match with the inspection lot.
    When trying to take the UD (QA11), the following error message appear :
    MMBE :
    Do you have any clue ?
    Regards,

    Hello Amol,
    Thanks for your answer.
    I gonna check QALS tomorrow as I don't have access to the system right now.
    I need to make some clarifications to my previous message, in fact ten inspection lots was generated under the same material document which had 10 items (via MB1B).
    9 Inspection lots has been accepted (321) and successfully put into the free stock by the quality, I only have this lot remaining coming from the same document as other ones.
    Material Master/Quality Mgmt and inspection types for this article/Plant has not been changed and are correctly set...
    I cannot use MB1B, mvt code 321 to move this QI stock to the free stock as QM is activated... I'll get something like "Change the inspection stock of material 0000000 in QM only".
    I thinks that, to clean the stock, the only option i've got is to make an inventory from Q stock (mvt 713).
    I'm trying to find out what are the root causes of this problem for this not to happen again....
    Thanks again for your help,
    Kevin
    PS : Just checked QALS table this morning, indeed, the inspection lot does not exist.
    So, i've got no trace of it in QM, but I'm able to find it in WM...
    Message was edited by: Kevin Bou

  • Automatic schedule lines not creating after MD03

    HI Gurus,
    When I am running MD03 system is creating Pur. Requisitions instead of Schedule lines
    I am running with
    NETCH
    2
    3
    1
    1
    1
    29102011
    Data maintained
    1.Material master /vendor master Auto po ticked (MRP type VB ROP 500 ,Safety stock 600, current stock 200)
    2.Sch. Agreement created with LP (validity period, Qty ok)
    3.Pur. Info rec maintained for vendor material for the plant.
    4.Source list maintained with Vendor,scheduling agreement no ,item no, MRP indicator 2 Fixed vendor ticked
    Now after Running MD03
    Pur. Req created for 400 qty
    but when I click on Procurement proposal manually I can select Del. Schedule and create
    but system is asking Agreement no. item,qty etc (I already maintained Source list system is asking again )
    Then why not system creating automatically..
    Please help..
    Thanks in advance

    Thanks  Jürgen,
    It was a problem of Date ,validity period of the SA.
    which I sort out any way thank you. for your input

Maybe you are looking for